Transcript
MODEL NSP-350F2 20° Round Head Nailer
TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #1013746 for detailed information on this tool. It is the customer’s responsibility to have all operators and service personnel read and understand this information.
PARTS LEGEND
*
501300 502082 502091 501752 501986 501862 500754 500744 500743 500742 091986 501837 502089 501861 502104 501979 501980 501540 500249 500779 501002 500866 502124 501023 501299 091622 502075 092042 502084 500525 500516 502078 071297 501520 097746 401958
4 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 3 1 1 1
S.H.C.S. 1/4-20 x 1-1/4" Blade Seal T.H.S.C.S. 1/4 -20 x 3/4" Air Deflector Top Cap Cap Seal Spacer, Exhaust Stop, Piston Spring, Valve Seat, Spring O-Ring Piston, Valve O-Ring O-Ring O-Ring, Piston Piston Driver Blade Sleeve O-Ring Flange, Sleeve O-Ring Bumper Housing (with roll pin) Grip, Handle S.H.C.S. 1/4-20 x 1” Reducing Pipe Bushing End Cap, Housing O-Ring W.C.E. Guide Locknut, 5/16-24 B.H.C.S. 5/16 x 24 x 7/8” Label, Housing Roll Pin Spring, Valve Pin Valve Pin Valve Body
37 38 39 40 41 42 43 44 45 46 ▲47 48 49 50 51 52 53 ▲54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 **70 71 72
Make sure Warning Label (Part No. 502092) is properly affixed. Replace if necessary. Label available at no charge through the Service Department.
▲ ■
Apply Loctite 242 (Blue) Part No. 093500 Apply Loctite 680 (Green) Part No. 401491
➔
Denotes new changes
1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1
O-Ring Sequential Trigger Lever, Bottom Trip Pin, Trigger Trigger Spirol Pin Retaining Washer Grooved Pin Nose 20° Follower S.H.C.S. 5/16-18 x 1" Upper W.C.E. Spring, W.C.E. Lower W.C.E. Washer Lock Washer S.H.C.S. 1/4-20 x 1/2” Screw 1/4-28 x 3/4" Nail Cover Spring Locknut,10-32 Lock Nut, 6-32 Wear Strip Rafter Hook Assembly Negator Assembly S.H.C.S. 10-32 x 2" S.H.C.S. 6-32 x 5/8" End Cap, Magazine Spring Latch Bushing, Latch Model Label Drum Pin Assembly Nameplate/Warning Label Front Bracket Label,Sequential Cycle
AIR CONSUMPTION CHART
Denotes Normal Wear Items
**
092174 501976 501008 402669 501010 501009 402668 501608 502079 502083 501997 501058 501071 500728 404800 502097 091618 501567 502085 501479 092037 502113 502098 501994 500513 500517 500518 500511 500199 500515 404908 502095 501046 502092 500509 XH10831
AIR CONSUMPTION - SCFM/FASTENER
1 2 ▲ 3 4 5 *6 7 8 9 10 *11 12 *13 *14 *15 16 ■ *17 18 *19 20 *21 *22 23 24 25 26 27 *28 29 30 31 32 33 34 35 36
NSP-350F2 - 20°, 502101
AIR PRESSURE - PSIG
Note: For optimum performance Duo-Fast recommends the use of a 3/8” Male inlet fitting.
NSP-350F2 502101
24
1
23 27 30
3
26 25
28
4 32
33
5
34
31 160 in/lbs
40
38
35 6
37
36 43
45 39
7 29
8 10
42 41
9
Optional Trigger Assembly #501048
11 12
13
325 in/lbs
Main Valve Assembly #501989
44
47 56
14
49
Piston Assembly #501062
16 15
60
48 W.C.E. Assembly #502080
250 in/lbs
51 53
50
52 57
17 59
64 62 67
160 in/lbs
18
19
68
54
13
70 61 71
46
63 66
72 69
20
65
58
55
Magazine Assembly #502122
54 160 in/lbs
21 22 2
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool’s operation and present a safety hazard.
ACCESSORIES Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system.
Part No. 1X0713
Toothless Work Contacting Element This W.C.E. has a smooth tip for decking, siding and sheathing applications.
Part No. 500810
No-Mar Work Contacting Element Rubber tip prevents you from marring wood surfaces
Part No. 501077
No-Mar Tip Replacement tip for No-Mar Work Contacting Element #501077.
Part No. 501022
Lubricants and Loctite Loctite 242 (Blue) Lubricating Oil 16 oz. Lubricating Oil with Antifreeze Chemplex 710 Lubricant 1 lb. Lubricant 5 gram tube
242 Removable
Part No. 093500 Part No. 403720 Part No. 219090 Part No. 403734 Part No. 219188
NSF
P/N: 24221
CAUTION: CAUTION: MAY MAY CAUSE CAUSE ALLERGIC ALLERGIC SKIN SKIN REACTION. REACTION. EYE EYE IRRITANT. IRRITANT. Read back back panel. panel. Read
NET NET .34 .34 FL. FL. OZ. OZ. (10 (10 ml) ml)
Degreaser Cleaner Ideal cleaner for all Paslode tools.
Part No. 219086
Large Nylon Tool Case
Part No. 219246
Safety Glasses Clear
Part No. 502088
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
WEAR EYE AND HEARING PROTECTION
60
0
120
60
120
0
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
Printed in U.S.A. © 2006, Illinois Tool Works, Inc.
888 Forest Edge Drive Vernon Hills 60061-3105
502105-1 07/06
