Transcript
Torque Multiplier CATALOG
version 1.0
Mountz Eliminator Torque Multipliers are available in hand, pneumatic and electric models. These tools are the ideal solution for true torque control, speed, power, physical ease, silence and safety.
Torque Multipliers In nearly every heavy industrial application, turning threaded fasteners, nuts and bolts is generally viewed by two criteria: (1) The need to fasten tightly enough to prevent movement of parts and achieve a good seal without exceeding the fastener s elasticity level. (2) Successful removal of fasteners after long periods of environmental exposure to harsh conditions. Selecting the right heavy torque tool for the job is crucial. When it comes to turning nuts and bolts, especially stubborn corroded ones, what could be more basic than power?
Introduction
01.1
You need controlled power. That is, controlled torque, which provides smooth torque, with continuous rotation. Otherwise, you could outdo yourself and strip threads, break bolt heads or even cause personal injury.
Technicians are finding that the best solution for applying high torque today is with a complete range of torque control products, including manual and powered torque wrenches and torque multipliers. Mountz torque multipliers provide precision torque control, making it easier and often safer to assemble and service-threaded fasteners while reducing application problems and tool costs. Mountz Torque Multipliers vs. Hydraulics Wrenches Hydraulic wrenches are notorious for their heavy ratchets, bulky compressors and laborious operation. Hydraulic tools operate through a hydraulic ram that extends and retracts, ratcheting the head. This is a long and tedious process that requires the operator to activate and stand by the pump with a hand-held controller.
Torque Multipliers increase speed and productivity, as it is faster than a hydraulic wrench and is less expensive. Designed to deliver smooth torque control, with continuous rotation, these torque multipliers eliminate the cumbersome set up time and slow ratcheting process of hydraulic wrenches. Mountz Torque Multipliers vs. Impact Wrenches Impact wrenches are destructive by nature with its hammering design. These tools are not ergonomically friendly to an operator and require a high maintenance budget. Mountz torque multipliers are ergonomically safer than the harmful hammering of impact wrenches and eliminates frequently costly repairs of impact wrenches.
HAND MULTIPLIERS
These torque multipliers are the ideal tools for applications where air and electricity aren t easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries. Page 01.9 - 01.11
PNEUMATIC MULTIPLIERS
Designed for precision tightening and loosening of all heavy duty fastening connections the pneumatic multipliers are non-impacting and operate at a smooth, continuous rotation. The torque control is obtained with the use of an air pressure regulator and the tool will shut off once torque is achieved. Page 01.7, 01.8, 01.12
ELECTRIC MULTIPLIERS
Electric multipliers increase speed and productivity. With a brushless motor design these tools are low maintenance and feature a universal AC Input (100-253V / 45-66 Hz). The speed, frequency and torque are correspondingly regulated and controlled with a built-in controller. The electric multipliers are nonimpacting and operate at a smooth, continuous rotation. Page 01.4 - 01.6
Introduction
ISO 9001and ISO 17025 Company
01.2
Torque Chart
Eliminator CLD & CLS
ELIMINATOR CLD
100
PHYSICAL EASE Vibration-free operation prevents operator fatigue.
RUNNING AIR PRESSURE - PSI
90 80 70 60 50 40 30 20 10
NOISE Only 81 decibels at three feet (one meter).
0
1000
2000
3000
4000
5000
6000
5000
6000
TORQUE - lbf.ft ELIMINATOR CLS
SAFETY Smooth continuous operation is safer than the vibration and hammering of typical impact wrenches.
100
TORQUE CONTROL Torque control is obtained with the use of an air pressure regulator. Exhaustive tests have shown that torque multipliers will stall out consistently to within 5% of the same torque figure at a given constant air pressure.
NOTE! All curves are approximate values. Many factors such as differences in compressed air supplies, joint characteristics, and other application related variables can cause deviations from reported torque output.
RUNNING AIR PRESSURE - PSI
90 80 70 60 50 40
GEAR 2
GEAR 1
30 20 10
0
1000
2000
3000
4000
TORQUE - lbf.ft TORQUE CHART
01.3
800.456.1828
EFCip
Electric Torque Multiplier (with built-in controller) STANDARD Model
Item #
Torque Ranges N.m lbf.ft
Speed RPM
EFCip10 EFCip20 EFCip30 EFCip40 EFCip50 EFCip60 EFCip70 EFCip80 EFCip90 EFCip100
210300 210301 210302 210303 210304 210305 210307 210308 210310 210311
52 - 295 59 - 442 111 - 727 185 - 1106 221 - 1327 332 - 1843 443 - 2581 590 - 3097 738 - 3688 959 - 4646
76 38 24 15 13 12 9 7 6 4
Model
Item #
Torque Ranges N.m lbf.ft
Speed RPM
EFCip10 Plus EFCip20 Plus EFCip30 Plus EFCip40 Plus EFCip50 Plus EFCip60 Plus EFCip70 Plus EFCip80 Plus EFCip90 Plus EFCip100 Plus
210312 210313 210314 210316 210315 210661 210318 210319 210320 210662
52 - 295 59 - 442 111 - 727 185 - 1106 221 - 1327 332 - 1843 443 - 2581 590 - 3097 738 - 3688 959 - 4646
76 38 24 15 13 12 9 7 6 4
PLUS
70 - 400 80 - 600 150 - 1000 250 - 1500 300 - 1800 450 - 2500 600 - 3500 800 - 4200 1000 - 5000 1300 - 6300
70 - 400 80 - 600 150 - 1000 250 - 1500 300 - 1800 450 - 2500 600 - 3500 800 - 4200 1000 - 5000 1300 - 6300
Torque Multipliers
KEY FEATURES Accuracy better than
5%.
Precision tightening and loosening of all heavy duty fastening connections. Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth, continuous rotation. Increases speed and productivity, 5-10 times faster than slow ratcheting hydraulic wrenches. Less expensive than hydraulic wrenches. Ergonomically safer than the harmful hammering of impact wrenches. Eliminates frequent and costly repairs of impact wrenches. Standard models feature LED Display or Plus models feature LC Display. Microprocessor controlled. The speed, frequency and torque correspond with built-in controller (no separate box needed).
Length
Brushless motor design provides low maintenance.
218 mm
Over-heat protection. Universal AC Input (100-253V / 45-66 Hz). 173 mm
The handle can free float or locks in set position. 217 mm
Protected against dampness and spattered water, IP54 protection.
Spline D2
90 mm
STANDARD MODELS
DIMENSIONS and WEIGHT Model EFCip10 EFCip20 EFCip30 EFCip40 EFCip50 EFCip60 EFCip70 EFCip80 EFCip90 EFCip100
Square Drive
Spline Dia. mm
D2 mm
Length in. mm
3/4" 3/4" 3/4" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2"
41 41 41 54 54 54 72 72 72 72
85 85 85 85 85 98 98 123 123 123
13 13 13 15 15 15.3 16 16 16.9 16.9
330 330 330 382 382 388 406 406 428 436
RENTAL! Torque Multipliers are part of our Rental Program. Ask a customer service representative about availability.
Weight lbs. 19.8 19.8 19.8 22 22 24.2 29.1 29.1 38.6 40.8
Feature LED Display: Preset torque with 19 stages as well as adjustable torque direction.
PLUS MODELS Feature LC Display: Preset torque & rotation angle can be set and displayed as well as adjustable torque direction.
Right/Left Indicator
Torque Setting Controls for Settings Torque Setting Rotation Angle Setting Controls for Settings EFCip
ISO 9001and ISO 17025 Company
01.4
Torque Multipliers
KEY FEATURES Accessories Accessories
Accuracy better than 5%. Precision tightening and loosening of all heavy duty fastening connections. Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth, continuous rotation. Increases speed and productivity, 5-10 times faster than slow ratcheting hydraulic wrenches. Less expensive than hydraulic wrenches. Ergonomically safer than the harmful hammering of impact wrenches. Eliminates frequent and costly repairs of impact wrenches. Standard models feature LED Display or Plus models feature LC Display.
RETENTION RING Used to hold a reaction foot, bar or ring on the Multiplier. See Page 01.13
6 PT. IMPACT SOCKETS A wide range of durable sockets available. See Page 01.14
EF / EFW
01.5
800.456.1828
Microprocessor controlled. The speed, frequency and torque correspond with built-in controller (no separate box needed). Brushless motor design provides low maintenance. Over-heat protection. Universal AC Input (100-253V / 45-66 Hz). The handle can free float or locks in set position.
PLUS MODELS
EF & EFW
Feature LC Display: Preset torque & rotation angle can be set and displayed as well as adjustable torque direction.
Electric Torque Multipliers (with built-in controller)
B
C
E
F
EF Series
A
In-Line Multiplier
STANDARD MODELS Feature LED Display: Preset torque with 19 stages as well as adjustable torque direction.
F
A
LEGEND A On/Off D
B Torque Setting
B
C Rotation Angle Setting
EFW Series
D Right/Left Indicator
E
E Controls for Settings
Right Angle Multiplier
F Operation Buttons:
CW Direction, Start/Stop, and CCW Direction
STANDARD
EF PLUS
STANDARD
EFW PLUS
Torque Ranges N.m
Model
Item #
Model
Item #
Model
Item #
Model
Item #
lbf.ft
EF100 EF200 EF250 EF300 EF400 EF600 EF800 EF1000
210604 210605 210606 210607 210608 210609 210610 210611
EF100Plus EF200Plus EF250Plus EF300Plus EF400Plus EF600Plus EF800Plus EF1000Plus
210624 210625 210626 210627 210628 210629 210630 210631
EFW100 EFW200 EFW250 EFW300 EFW400 EFW600 EFW800 EFW1000
210614 210615 210616 210617 210618 210619 210620 210621
EFW100Plus EFW200Plus EFW250Plus EFW300Plus EFW400Plus EFW600Plus EFW800Plus EFW1000Plus
210634 210635 210636 210637 210638 210639 210640 210641
118 - 796 221 - 1548 320 - 1987 368 - 2286 663 - 3134 811 - 4536 1327 - 5752 1512 - 7228
160 - 1080 300 - 2100 435 - 2695 500 - 3100 900 - 4250 1100 - 6150 1800 - 7800 2050 - 9800
Speed RPM
RENTAL! Torque Multipliers are part of our Rental Program. Ask a customer service representative about availability.
33 16 14 12 8 7 4 3
NOTE! Remote Control operation available. See Accessories page 01.13 All Weather models available.
Length
DIMENSIONS and WEIGHT Model
Square Spline Drive Dia. mm
D2 mm
Length in. mm
EF100 EF200 EF250 EF300 EF400 EF600 EF800 EF1000
1" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2"
85 85 85 98 98 123 148 173
20.2 20.2 20.2 20.2 20.6 21.6 21.8 21.8
54 54 54 72 72 72 72 91
515 515 515 515 525 550 555 555
Spline
D2
60 mm
Weight lbs. 28.5 28.5 28.5 31 32 42 48.5 59.5
EF Series 105 mm 346 mm 60 mm 104 mm
Model
Square Spline Drive Dia. mm
D2 mm
Height Weight in. mm lbs.
EFW100 EFW200 EFW250 EFW300 EFW400 EFW600 EFW800 EFW1000
3/4" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2"
85 85 85 98 98 123 148 173
11.2 11.2 11.2 12 12.5 13.7 13.7 15
54 54 54 72 72 72 72 91
285 285 285 305 320 350 350 380
30 30 30 30 35 44 52.5 64
EFW Series Height D2 Spline
EF / EFW
01.6
CLD
Pneumatic Torque Multiplier (Rotating Body Tool)
CLD
Torque Multipliers
KEY FEATURES Accuracy better than
Torque Ranges N.m
Square Drive
Model
Item #
lbf.ft
CLD55 CLD85 CLD85 CLD105 CLD125 CLD155 CLD225 CLD280 CLD380 CLD580 CLD780 CLD980
210572 210573 210574 210575 210576 210577 210571 210578 210579 210580 210581 210582
121 - 357 225 - 660 225 - 660 270 - 796 332 - 970 435 - 1275 671 - 1970 870 - 2552 1100 - 3230 1534 - 4510 1925 - 5660 2810 - 8257
Speed RPM
Spline D2 Dia. mm mm
Length mm in.
Weight lbs.
48 25 25 15 12 10 8 6.5 4 2.5 1 0.5
41 41 54 54 54 54 54 54 72 72 72 91
11 11.8 11.8 11.8 11.8 11.8 11.8 11.8 12.6 13.8 13.8 14.6
15 18 18 18 18 18 20 20 26 35 42 55
165 - 485 305 - 895 305 - 895 365 - 1080 450 - 1315 590 - 1730 910 - 2670 1180 - 3460 1490 - 4380 2080 - 6115 2610 - 7675 3810 - 11195
3/4" 3/4" 1" 1" 1" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2"
5%.
Compact design is safe, easy, and simple to handle.
Accessories
Precision tightening and loosening of all heavy duty fastening connections. Flexible tool positioning with 360 rotating handle. Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth, continuous rotation. Torque adjustment and control is regulated by the Lubro Control Unit (LCU) via the air supply. Multiplier increases speed and productivity, as it is faster than a hydraulic wrench and is less expensive. Eliminates the cumbersome set up time and slow ratcheting process of hydraulic wrenches.
REACTION RING Reaction Devices: Foot, Bar and Ring. See Page 01.13
Model CLD55 CLD85 CLD85 CLD105 CLD125 CLD155 CLD225 CLD280 CLD380 CLD580 CLD780 CLD980
Ergonomically safer than the harmful hammering of impact wrenches. Eliminates the frequent costly repairs of impact wrenches.
85 85 85 85 85 85 85 85 98 123 148 173
280 300 300 300 300 300 300 300 320 350 350 370
210 mm
Heavy-duty gearbox.
Length 6 PT. IMPACT SOCKETS A wide range of durable sockets available.
D2 Spline Diameter
See Page 01.14 Connect With A:
NOTE! All Pneumatic Multipliers should use a high quality air filter regulator.
LCU-2 Our Lubro-Control Unit is designed to provide a controlled supply of filtered, regulated and lubricated compressed air to the Multiplier.
RENTAL! Torque Multipliers are part of our Rental Program. Ask a customer service representative about availability.
See Page 01.13
CLD
01.7
800.456.1828
Mountz MC14 catalog Copyright ©2008 all rights reserved
CLS
Pneumatic Torque Multipliers (Fixed Body Tool)
Accuracy better than 5%. Compact design is safe, easy, and simple to handle. Precision tightening and loosening of all heavy duty fastening connections. Two Options; Single Speed models are high speed with low torque range, and Two Speed models feature manual two-speed gearbox for controlled screw tightening with high torque range. Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth, continuous rotation. Torque adjustment and control is regulated by the Lubro Control Unit (LCU) via the air supply. Multiplier increases speed and productivity, as it is faster than a hydraulic wrench and is less expensive. Eliminates the cumbersome set up time and slow ratcheting process of hydraulic wrenches.
Torque Mulitipliers
Ergonomically safer than the harmful hammering of impact wrenches. Eliminates the frequent costly repairs of impact wrenches. Heavy-duty gearbox. 210 mm
Length
NOTE! All models supplied with Reaction Foot, except *. Length
All Pneumatic Multipliers should use a high quality air filter regulator.
D2
Spline Diameter
Spline Diameter
SINGLE SPEED Item #
lbf.ft
CLS15 CLS15 CLS25 CLS25 CLS35 CLS45 CLS75 CLS95 CLS135 CLS175 CLS255 CLS315 CLS1700*
213030 213031 213032 213033 213034 213035 213036 213037 213038 213039 213040 213041 213021
44 - 162 44 - 162 70 - 206 70 - 206 99 - 287 121 - 357 225 - 660 269 - 796 365 - 1069 475 - 1401 671 - 1969 870 - 2551 1180 - 12540
Model CLS15 CLS15 CLS25 CLS25 CLS35 CLS45 CLS75 CLS95 CLS135 CLS175 CLS255 CLS315 CLS1700*
Square Drive
TWO SPEED Model
Item #
lbf.ft
60 - 220 60 - 220 95 - 280 95 - 280 135 - 390 165 - 485 305 - 895 365 - 1080 495 - 1450 645 - 1900 910 - 2670 1180 - 3460 1600 - 17000
1/2" 3/4" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 2 1/2"
CLS2/100 CLS2/100 CLS2/150 CLS2/300 CLS2/400 CLS2/600 CLS2/800 CLS2/1000 CLS2/4800*
213001 213002 213014 213003 213004 213006 213008 213010 213005
88 - 830 88 - 830 125 - 1191 284 - 2651 398 - 3728 620 - 5800 745 - 6960 866 - 8120 3466 - 35845
Torque Ranges N.m
Model
Speed RPM
Spline Dia. mm
D2 mm
Length in. mm
Weight lbs.
60 60 38 38 34 27 19 13 9 7 6 4 1
41 41 41 41 41 41 41 41 54 54 54 54 *
85 85 85 85 85 85 85 85 85 85 85 85 275
10 10 10 10 10 10 10.9 10.9 11.8 11.8 13 13 22.4
13.2 13.2 14.3 14.3 14.3 14.3 16.5 16.5 17.6 17.6 19.8 19.8 132
255 255 255 255 255 255 277 277 300 300 330 330 570
210 mm
D2
Accessories See Page 01.13
Torque Ranges N.m
Square Drive
120 - 1125 120 - 1125 170 - 1615 385 - 3595 540 - 5055 840 - 7865 1010 - 9435 1175 - 11010 4700 - 48600
3/4" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 2 1/2"
REACTION BAR Reaction Devices: Foot, Bar and Ring.
* Supplied with Reaction Ring
Model CLS2/100 CLS2/100 CLS2/150 CLS2/300 CLS2/400 CLS2/600 CLS2/800 CLS2/1000 CLS2/4800
Speed RPM Low High
Spline Dia. D2 mm mm
Length mm in.
Weight lbs.
12 12 7 5 3 2 1.5 1 0.3
41 54 54 54 72 72 72 91 *
13 13 13 14.2 15 16.1 16.1 16.9 22.4
15 15 16 20 24 33 44 53 132
36 36 21 15 9 6 5 4 0.6
85 85 85 85 98 123 148 173 275
330 330 330 360 380 410 410 430 570
LCU-2 Our Lubro-Control Unit is designed to provide a controlled supply of filtered, regulated and lubricated compressed air to the Multiplier.
RENTAL! The CLS is part of our Rental Program. Ask a customer service representative about availability.
* Supplied with Reaction Ring
CLS
ISO 9001and ISO 17025 Company
01.8
MTM
Hand Multiplier
Torque Multipliers
Model
Item #
Maximum Torque Input Output lbf.ft N.m lbf.ft N.m
MTM-15 MTM-27
215026 215027
170 559
1105 2000
231 758
1500 2700
Model
Female Input Square Drive
Male Output Square Drive
Torque Multiplication Ratio
MTM-15 MTM-27
1/2" 3/4"
3/4" 1"
6.5:1 3.3:1
HEAD DIMENSIONS and WEIGHT Length mm
Model
in.
MTM-14 MTM-27
6 1/3" 7 1/2"
160 190
MTM-15 Case Set Multiplier Reaction Bar (L = 380mm) Reaction 90° Base Reaction 90° Bar Breakaway Adapter
KEY FEATURES Accuracy better than 5%. Precision tightening for heavy duty fastening connections. Constructed with quality steel and matted finish. Commonly used in construction, heavy equipment & power generation industries. Portable, compact and lightweight. Torque Multiplication Ratio - low energy input with high torque output. For operation in combination with a torque wrench. Ideal for remote locations where no source of power is available. Includes plastic case.
MTM-27 Case Set Multiplier Reaction Bar (L = 380mm) Reaction 90° Base Reaction 90° Bar
MTM
01.9
800.456.1828
in.
Height mm
3 7/8" 4 1/3"
97 111
Weight lbs. 5.7 7.5
HG
Hand Multiplier
Model
Item #
Maximum Torque Output N.m lbf.ft
H-10* H-15* HG-10 HG-15 HG-20 HG-30 HG-40 HG-50 HG-60 HG-80**
213700 213701 213702 213703 213704 213705 213706 213707 213708 213709
1033 1033 1033 1033 2581 3687 4425 5900 8480 36880
HG
1400 1400 1400 1400 3500 5000 6000 8000 11500 50000
Torque Multiplication Ratio
Gear Ratio
3.5:1 3.5:1 3.5:1 3.5:1 11.5:1 14.3:1 16:1 20.5:1 23.2:1 126:1
4 4 4 4 16 18 21 24 28 180
**Not fitted with Anti-Windup. **All models supplied with Reaction Foot, **except HG-80 supplied with Reaction Ring.
KEY FEATURES Accuracy better than Accessories
DRIVE SIZE, DIMENSIONS and WEIGHT Square Drive Spline Model Male Output Dia. mm H-10* 3/4" 41 H-15* 1" 41 HG-10 3/4" 54 HG-15 1" 54 HG-20 1" 54 HG-30 1 1/2" 72 HG-40 1 1/2" 72 HG-50 1 1/2" 72 HG-60 1 1/2" 91 HG-80 2 1/2" *
D2 mm
85 85 85 85 85 98 123 148 173 275 *Weights do not include reaction device.
180 200 180 200 235 250 280 280 290 360
8 8.8 8 8.8 13.3 15.6 33 35.3 61.8 128
Precision tightening and loosening of all heavy duty fastening connections. For operation in combination with a torque wrench.
Length Weight in. mm lbs. 7 7.9 7 7.9 9.3 9.8 11 11 11.4 14.2
5%.
Torque Multiplication Ratio - low energy input with high torque output. Compact design allows for operation in space-restricted applications.
6 PT. IMPACT SOCKETS A wide range of durable sockets available. See Page 01.14
Ideal tool for applications where air and electricity aren t easily accessible. Most models furnished with anti-windup ratchets allowing jobs to be performed easily, efficiently and safely. Shear pin at input drive protects gearbox in case of torque overload. Constructed with quality steel. Each tool contains extra sheer pins and torque multiplication selection chart.
Female Input 3/4" Square Drive (all models)
RETENTION RING Holds a reaction foot, bar or ring on the Multiplier. L
See Page 01.13
Spline Diameter
D2
RATCHET END
RENTAL! Torque Multipliers are part of our Rental Program. Ask a customer service representative about availability.
HG
ISO 9001and ISO 17025 Company
01.10
HSD
Hand Multiplier - Sensor Controlled
HSD Torque Multipliers
Hand Multiplier Sensor Controlled
Torque Ranges N.m
Model
Item #
lbf.ft
HSD 50 HSD 100 HSD 200 HSD 300 HSD 400 HSD 600 HSD 800 HSD 1000 HSD 2250
213946 213947 213948 213949 213942 213950 213952 213953 213951
37 - 368 74 - 737 148 - 1475 222 - 2212 295 - 2950 443 - 4425 590 - 5900 737 - 7375 1660 - 16595
50 - 500 100 - 1000 200 - 2000 300 - 3000 400 - 4000 600 - 6000 800 - 8000 1000 - 10000 2250 - 22500
PTT - Bolt Audit Model Sold Separately Item #072995
PTT
Manual Sensor-Tool
Joint
TorqueControlled Measurement
Data Export: PC Output, Documentation
DIMENSIONS and WEIGHT
Female Input 3/4" Square Drive (all models)
KEY FEATURES Accuracy better than 1%. Hand Multiplier with built-in transducer.
L
Torque and Angle can be monitored or pre-set using the PTT inconjunction with the transducerized multiplier. Precision tightening and loosening of all heavy duty fastening connections. Low energy input with high torque output. Export data to a PC for documentation control with PTT.
D2 Spline Diameter
Using the PTT-2000 Bolt Audit Model with HSD, the system is designed for auditing a fastener for a test such as determining relaxation after a fastener has been tightened. The purpose of the bolt audit function is to report the degree of movement from the initial torque threshold to the final torque threshold. The PTT will display the final torque threshold and the total angle displacement, which has occurred from the initial torque threshold and final torque threshold. HSD
01.11
For operation in combination with a torque wrench.
Model
Spline Length Weight Male Output Dia. D2 Square Drive mm mm in. mm lbs.**
HSD 50 HSD 100 HSD 200 HSD 300 HSD 400 HSD 600 HSD 800 HSD 1000 HSD 2250
3/4" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 2 1/2"
41 54 54 72 72 72 72 91 *
85 85 85 98 98 123 148 173 275
8.7 8.7 11.6 12.5 12.5 16.9 16.9 17.3 20
220 220 295 320 320 430 430 440 510
12.3 16.5 17.6 22 23.1 41.8 44 70.5 137
*All models supplied with Reaction Foot, except HSD 2250 supplied with Reaction Ring. **Weights do not include reaction device.
RENTAL! The HSD is part of our Rental Program. Ask a customer service representative about availability.
RG
(Radial Gearing) Pneumatic & Electric Radial Torque Multipliers
Accuracy better than 5%. Compact design is safe, easy, and simple to handle. Low profile radial head allows access where clearance is limited. Specially designed for heat plate exchanger applications. Continuously rotating hex drive is faster than hydraulics and more reliable than impacting tools. Torque reaction is absorbed by means of a reaction stud. Torque Mulitipliers
Hex drive size reduces or enlarges with drop in hex adapters. Electric models - Universal AC Input (100-253V / 45-66 Hz) and features LED display (see page 05.4).
PNEUMATIC
Torque Ranges N.m
Model
Item #
lbf.ft
RCL-36P RCL-46P RCL-80P
210038 210040 210182
435 - 3123 465 - 3344 494 - 3569
Speed RPM Low High
590 - 4235 630 - 4535 670 - 4840
1 1 2
3 3 6
L Pneumatic Models Connect With A: W
A1
DIMENSIONS and WEIGHT Hex Drive mm Model RCL-36P 36 RCL-46P 46 RCL-80P 80
Length in. mm 15.7 400 17.1 435 17.7 450
Width in. mm 6.4 163 7.4 188 9.1 230
Stud Bolts A2 A1 mm mm 100 112 160 130
RCL-36P RCL-46P
R L
Radius mm 56 73 85
Wt. lbs. 27.5 30.8 46.3
A2
W
RCL-80P R
LCU-2
A1
Provides a controlled supply of filtered, regulated and lubricated compressed air to the Multiplier.
NOTE! L
All Pneumatic Multipliers should use a high quality air filter regulator.
See Page 01.13 W
ELECTRIC Item #
Model EFC-R 36P EFC-R 46P EFC-R 80P EF-R 36P EF-R 46P EF-R 80P
210184 210185 210186 210187 210188 210189
Torque Ranges N.m lbf.ft 413 - 2787 413 - 2787 413 - 2787 413 - 2787 413 - 2787 413 - 2787
Speed RPM
560 - 3780 560 - 3780 560 - 3780 560 - 3780 560 - 3780 560 - 3780
2 2 2 13 12 11
EFC-R 36P EFC-R 46P
R A1 L
HEX ADAPTERS Sold Separately. Stock sizes listed. Custom sizes available.
A2
W
EFC-R 80P R A1
Length in. mm 15.2 385 16.7 425 18.7 475 19.6 500 21.6 550 23.6 600
Width in. mm 6.4 163 7.4 188 9.1 230 6.4 163 7.4 188 9.1 230
Stud Bolts A2 A1 mm mm 100 112 160 130 100 112 160 130
Radius mm 56 73 85 56 73 85
RENTAL! RG Multipliers are part of our Rental Program. Ask a customer service representative about availability.
Wt. lbs. 26.3 33 48.5 36.3 41.8 57.3
30mm 216002 W
EF-R 36P EF-R 46P A1 L
Standard Hex Drive in. 36 46
80
1 1/16" 1 7/16" 1 13/16" 216027 216030 216046
27mm 41mm 50mm 1 5/8" 1 1/8" 2" 216001 216005 216021 216028 216031 216047
L
R
80
24mm 36mm 46mm 216000 216004 216020
DIMENSIONS and WEIGHT Hex Dr. Model mm EFC-R 36P 36 EFC-R 46P 46 EFC-R 80P 80 EF-R 36P 36 EF-R 46P 46 EF-R 80P 80
Metric Hex Drive mm 36 46
A2
32mm 216003
55mm 1 1/4" 216022 216029 60mm 3 31/32" 216023 216026 65mm 216024
2 3/16" 216048
2 9/16" 216050
70mm 216025
2 3/4" 216051
2 3/8" 216049
W
EF-R 80P
R
RG A1
01.12
Accessories Torque Multipliers
REMOTE CONTROL Operate with full control from a safe distance. Illustration shows dual tool operation (used in tandem).
NOSE EXTENSIONS Allows Torque Multipliers to be used in confined spaces. Fits over nose in place of normal reaction device. Special orders available.
Hand or Foot Remote Control
LCU
PNEUMATIC
LCU This unit is designed to provide a controlled supply of filtered, regulated and lubricated compressed air to the tool. The unit is supplied with a 10 foot hose and one 1/2" NPT connector and 300 PSI Rating. For tools rated at 40 SCFW.
Model: LCU-2 Pipe Size: 1/2" NPT FRL Out Max PSIG: 200 FRL In Max PSI: 200 Weight (approx): 7 lbs. Output: 1/2" Fem Swivel Input: 1/2" NPT male Item #061429
Model
Item #
Remote Control
Operation
FBL FBL 2 FBL 2
210593 210596 210273
Hand Hand Foot
Single Tool Dual Tool Dual Tool
ELECTRIC
NOTE! 2-1/2" Dia. Gage: (0-160 PSI with 5 PSI graduation) Liquid Filled
Model
Item #
Remote Control
Operation
FBE FBE 2 FBE 4
210274 210275 210276
Hand Hand Hand
Single Tool Dual Tool Four Tool
2 1/2" Square Drive
POWER GEAR Connect the Power Gear to a torque multiplier and increase output. Works with: Increase Max. Torque CLS2/100 CLS45 EF100
33190 lbf.ft / 45000 N.m 12540 lbf.ft / 17000 N.m 33190 lbf.ft / 45000 N.m
Model: G45 Gear Ratio: 45:1 Torque Multiplication Ratio: 38~40:1 (variable due to friction) Weight: 132 lbs. (60kg) Item #210269
Holds a reaction foot, bar or ring on the Multiplier.
Model (Length)
Item #
3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2"
NE - 6" NE - 9" NE - 12" NE - 18" NE - 6" NE - 9" NE - 12" NE - 18" NE - 6" NE - 9" NE - 12" NE - 18" NE - 6" NE - 9" NE - 12" NE - 18”
064250 064251 064253 064254 064255 064256 064257 064258 064259 064260 064261 064262 064263 064264 064265 064266
3/4" 275 mm
1"
TRIGGER LOCK for CLD, CLS, RCL Operate hands free, forward and reverse. (not pictured) Item# 210590
Input Drive
REACTION DEVICES To select a device, reference the Multiplier’s Spline Diameter and D2 sizes as listed in the specification charts. Y
REACTION BAR
Y
Y REACTION FOOT
Spline Dia. mm
Item #
41 54 72 91
21-10271 21-10273 21-10275 21-10277
Accessories
01.13
41 41 41 41 54 54 54 54 72 72 72 72 91 91 91 91
Handle
400 mm (15 3/4")
RETENTION RING
Spline Square Drive Dia. mm
Dimensions mm Spline Y Dia. mm D2 X 85 41 85 54 85 54 98 72 123 72 148 72 173 91 *Suggested for use
110 110 115 156 170 170 174 above
X
Item #
130 213893 130 218077 150 213916* 220 213892 220 213891 220 218074 220 213890 2000 N.m
X
Dimensions mm Spline Y Dia. mm D2 X 41 54 72 72 72 91
85 85 98 123 148 173
65 80 105 105 105 105
240 240 240 240 240 240
Item # 213903 213905 213899 213900 213898 213897
X REACTION RING
Dimensions mm Spline Y Dia. mm D2 X
Item #
85 41 65 28 213896 85 54 80 28 213917 98 72 110 33 213889 123 72 110 47 213904 148 72 110 47 213895 173 91 130 52 213894 275 ** 57 180 213943 **For CLS1700, CLS2/4800, EF2000, EF4000, EFW2000, EFW4000, HG80, HSD2250
6 Pt. Impact Sockets
For use with Torque Multipliers
D2
L C
T
Size D1
3/4" SQUARE DRIVE
1" SQUARE DRIVE
Size
Item #
D1
Dimensions in. D2 L T
1 1 1/16 1 1/8 1 1/4 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 3/4 2
271686 271221 271631 271220 271632 271223 271633 271634 271225 271635 271232
1.614 1.732 1.732 1.929 2.047 2.047 2.126 2.244 2.244 2.480 2.874
1.732 1.732 1.732 1.732 1.732 1.732 1.732 1.732 1.732 1.732 2.126
1.890 2.047 2.047 2.047 2.165 2.205 2.283 2.283 2.283 2.480 2.598
0.512 0.512 0.650 0.650 0.748 0.748 0.866 0.866 0.866 0.995 1.062
1 1/2" SQUARE DRIVE
C
Size
Item #
D1
Dimensions in. D2 L T
0.890 1.047 1.047 1.047 1.165 1.205 1.283 1.283 1.283 1.480 1.598
2 2 1/16 2 1/8 2 1/4 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 3/4 2 7/8 3
271614 271668 271708 271636 271709 271639 271640 271641 271642 271644 271710 271717
2.874 3.071 3.228 3.228 3.386 3.622 3.622 3.622 3.622 3.780 3.937 4.134
2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 3.386 3.386 3.386
EF-SERIES INLINE MULTIPLIER with built-in controller Page 01.5 & 01.6
2.756 2.953 2.953 3.071 3.543 3.543 3.543 3.543 3.661 3.740 3.740 3.780
1.062 1.181 1.181 1.299 1.378 1.378 1.378 1.378 1.496 1.496 1.614 1.732
C
Size
Item #
D1
1.631 1.828 1.828 1.946 2.418 2.418 2.418 2.458 2.536 2.615 2.615 2.655
2 3/8 2 1/2 2 9/16 2 5/8 2 3/4 2 7/8 3 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 1/2
272466 270818 270865 271711 272444 271712 272448 272445 271713 272446 271714 271715 271716
3.622 3.937 3.937 3.937 4.134 4.291 4.528 4.528 4.764 4.764 5.000 5.000 5.118
Dimensions in. D2 L T 3.386 3.740 1.378 3.386 3.740 1.378 3.386 3.740 1.378 3.386 3.937 1.496 3.386 3.937 1.496 3.386 4.134 1.614 3.386 4.331 1.732 3.386 4.331 1.770 3.386 4.724 1.850 3.386 4.724 1.850 3.386 4.724 1.930 3.386 4.724 1.930 3.386 4.724 1.930
C 2.115 2.115 2.115 2.312 2.312 2.509 2.706 2.706 3.099 3.099 3.099 3.099 3.099
HG HAND MULTIPLIER Ideal tool where air and electricity aren t easily accessible. Page 01.10
6 PT. IMPACT SOCKETS
ISO 9001and ISO 17025 Company
01.14
TORQUE ANALYZER & TEST MEASUREMENT CATALOG - MC14 Ask a Mountz customer service representative for a copy of our Torque Analyzer & Test Measurement Catalog (24 page). (Available in Print or PDF format) Torque Analyzers and Transducers Test Measurement Equipment Multiplexer & Bar Code Reader Accessories
CORPORATE HEADQUARTERS 1080 North 11th Street San Jose CA 95112 t 408.292.2214 t 800.456.1828 f 408.292.2733 e-mail
[email protected] www.etorque.com
DISTRIBUTION & SERVICE CENTER 19051 Underwood Road Foley AL 36535 t 251.943.4125 f 251.943.4979
US & CANADA SALES OFFICES Anaheim, Boston, Charlotte, Chicago, Cleveland, Dallas, El Paso, Los Angeles, Minneapolis, Nashville, Phoenix, Seattle, San Jose, Toronto
MOUNTZ MEXICO SA de CV MAIN OFFICE & SERVICE CENTER
ASSEMBLY POWER TOOL CATALOG - MC14 Ask a Mountz customer service representative for a copy of our Assembly Power Tool Catalog (76 page). (Available in Print or PDF format only) Hand Torque Screwdrivers Electric Torque Screwdrivers Transformers Torque Screwdriver Accessories Adapters, Bits, Bit Holders, Setters, Sockets
Av. Cristobal Colon #15343 Col. Paseos de Chihuahua Chihuahua, Chih. Mexico CP 31125 t 614.481.0023 f 614.481.0053
MEXICO SALES OFFICES Tijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey, Mexico DF, Guadalajara
Mountz MC14 catalog Copyright
2008 all rights reserved
