Preview only show first 10 pages with watermark. For full document please download

Touchcue-5-b Description Connection Installation

   EMBED

Share

Transcript

touchCUE-5-B CS0372 Description Front View Connection Microphone Installation Ethernet without PoE Infrastructure Electrical wall box Power supply PoE Adapter Light and proximity sensors OUT Ethernet Wall adapter IN LCD display with touch sensor Step 1 Ethernet cable Fixing screw Speakers Ethernet cable 2x screw Touch panel Ethernet with PoE Infrastructure Step 2 Rear View Step 3 Fixing screw Ethernet with PoE Button System Default Network connector Installation steps are as follows 1. Install wall adapter on the electrical wall box. Use delivered screws or keep maximum screw dimensions as described below. Ethernet cable max. 1.7 mm Max. Ø 5.5 mm System Default Setup Wall adapter When System Default button is pressed, the system default function is performed and setup is as follows • IP address: 192.168.1.128 2. Connect network cable and put the touch panel on the wall adapter. • IP Mask: 255.255.255.0 • Password: Empty (no input required) Box Contents User Manual Touch panel touchCUE-5-B incl. wall adapter Power supply with PoE injector incl. power cable Flat Ethernet cable Cleaning tissue Data Sheet Cue System Connector Wiring Sheet Declaration of Conformity Warranty Conditions Complete user manual can be downloaded here: http://www.cuesystem.com/user_manuals.aspx www.cuesystem.com | [email protected] © CUE, a.s. | All rights reserved. | Specifications are subject to change without prior notice. 3. Carefully tighten the fixing screw to fix touch panel on the wall. Data Sheet DS092_02 Revised 22.10.2014