Preview only show first 10 pages with watermark. For full document please download

Touchcue-5 Description Connection Installation

   EMBED

Share

Transcript

touchCUE-5 CS0371 Description Connection Installation Front View Ethernet without PoE Infrastructure Installation steps are as follows 1. Install the network cable as described on the following picture and connect the network connector. Microphone Power supply Light and proximity sensor PoE Adapter LCD display with touch sensor OUT Ethernet IN Ethernet cable Ethernet cable Network cable Speakers Rear View Ethernet with PoE Infrastructure Network connector 2. Place the touch panel on a table. Ethernet with PoE Integrated tabletop stand Ethernet cable hole Ethernet cable Network connector Button System Default Box Contents System Default Setup User Manual Touch panel touchCUE-5 When System Default button is pressed, the system default function is performed and setup is as follows Complete user manual can be downloaded here: Power supply with PoE injector incl. power cable Flat Ethernet cable Cleaning tissue Data Sheet • IP address: 192.168.1.128 http://www.cuesystem.com/user_manuals.aspx • IP Mask: 255.255.255.0 • Password: Empty (no input required) Cue System Connector Wiring Sheet Declaration of Conformity Warranty Conditions www.cuesystem.com | [email protected] © CUE, a.s. | All rights reserved. | Specifications are subject to change without prior notice. Data Sheet DS093_01 Revised 22.10.2014