Preview only show first 10 pages with watermark. For full document please download

Tp-210a

   EMBED


Share

Transcript

TP-210A 1:10 Computer Graphics Video, Audio & RS-232 over Twisted Pair Transmitter & Distribution Amplifier The TP-210A is a high-performance distribution amplifier and twisted pair transmitter for computer graphics video signals with resolutions up to UXGA, RS-232 signals and stereo or S/PDIF audio signals. The unit takes computer graphics video, stereo or S/PDIF audio and RS-232 signals and distributes each signal to two local outputs and ten twisted pair outputs. FEATURES ACCESSORIES: - Power cord OUTPUTS: - 10 LINE OUT on RJ-45 connectors 2 UXGA Video on 15-pin HD connectors 2 audio on 3.5mm mini jack connectors 2 S/PDIF on RCA connectors RS-232 with 2 TxD lines on terminal block connectors S/N RATIO: - AUDIO: >75dB TOTAL GAIN: - AUDIO: Analog/analog: 0dB Analog/SPDIF: -12dBFS TND+N: - AUDIO: <0.02% POWER SOURCE: - 100-240 VAC, 50/60 Hz, 46VA DIMENSIONS: - 19" x 7" x 1U W, D, H, rack mountable WEIGHT: - 3kg (6.6lbs) approx. TP-210A TECHNICAL SPECIFICATIONS RESOLUTION INPUTS OUTPUTS TWISTED PAIR CONNECTORS AUDIO INPUT CONNECTORS RS-232 INPUT CONNECTORS SYNC POLARITY SETTINGS TWISTED PAIR OUTPUTS SYSTEM RANGE (TWISTED PAIR) POWER CONNECTâ„¢ SYSTEM WORLDWIDE POWER SUPPLY INPUT: PRODUCT DIMENSIONS: PRODUCT WEIGHT: SHIPPING DIMENSIONS: SHIPPING WEIGHT: Up to UXGA. Computer graphics video (15-pin HD), stereo audio (3.5mm), S/PDIF (RCA) & RS-232 (terminal block). 2 (each input format) and 10 twisted pair. RJ-45. 2 3.5mm (unbalanced) & 2 RCA (S/PDIF). 4-pin terminal block (2xTx, RX & Gnd). H & V switches. Requires a compatible computer graphics video twisted pair receiver to convert the twisted pair signals back into a computer graphics video signals. Up to 100m (300ft). Only the TP-210A needs to be connected to a power source (within existing power supply limitations). 100-240V AC. 1 UXGA Video on a 15-pin HD connector 1 audio on a 3.5mm mini jack connector 1 S/PDIF on an RCA connector RS-232 with 1 RxD line on terminal block connectors 19" x 7.20 x 1U (43.6cm x 18.30cm 4.36cm) W, D, H 1.7kg (3.7lbs) approx. 55.00cm x 27.60cm x 10.70cm (21.65" x 10.87" x 4.21" ) W, D, H 2.3kg (5.2lbs) approx.