Preview only show first 10 pages with watermark. For full document please download

Tp‑125/tp‑125‑od/tp‑125edid/tp‑126/tp‑126‑od

   EMBED


Share

Transcript

TP‑125/TP‑125‑od/TP‑125EDID/TP‑126/TP‑126‑od Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Transmitters & Receivers COMPATIBLE NEW Compatible with HDTV component video signals when used with a breakout cable such as the Kramer C-GM/3RVF. The TP‑125 and TP‑126 are twisted pair transmitters and receivers for computer graphics video, unbalanced stereo audio and bidirectional RS‑232 data signals. The TP‑125 converts computer graphics, audio, and RS‑232 inputs to a twisted pair signal, and the TP‑126 converts the twisted pair signal back into computer graphics, audio and bidirectional RS‑232 data signals. The EDID model stores and recalls a default EDID setting in memory. The “od” models as a pair are protected from EMP voltage surges and support EDID. FEATURES ● Max. Resolution  -  WUXGA & 1080p. ● HDTV Compatible. ● EDID Capture  -  Copies and stores the EDID from a display device (TP-125EDID and TP-125-od). ● EMP Protection  -  The TP-125-od when used with the TP-126-od are protected ● ● ● ● ● ● Computer Graphics / Audio / RS-232 Control ● TP-125 Da ta Lin e GND TX RX TECHNICAL SPECIFICATIONS 12 VD INPUTS: C TP-126 TP -1 26 E IN GND TX RX LIN Lin e r OU T Re ce ive CAT 5 UX GA OUTPUTS: RS -23 2 ANAL OG AU DIO S/P OU COMMUNICATION: DIF T 12 VD VG A RS MAX. RESOLUTION: S/N RATIO: C -23 2 TOTAL GAIN: COUPLING: THD+N Audio: POWER SOURCE: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS: di o Au AV Display System with Built-in Speakers 5.30 KRAMER A io IN UX G DIO D at a AU / RS -23 2 Au d Au dio UT / EO U XG A / LIN Au dio TP -1 25 itt er UX GA IN ● / A Tr an sm VG RS-232 RANGE EXTENDERS & REPEATERS ● from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes. Bidirectional RS-232.  -  Maximum bit rate 19200bps. RS-232 Connect™ System  -  The unit can send RS-232 commands on the twisted pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature. Power Connect™ System  -  A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Twisted Pair Connectors  -  RJ-45 connectors. Audio Outputs  -  Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously (TP-126). Level (Gain) and EQ (Peaking) Controls  -  TP-126 and TP-126-od. System Range  -  Up to 100m (320ft). Greater distances possible depending on resolution and cable. Cable  -  UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Compact Kramer TOOLS™  -  3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter. ELECTRONICS, Video: 1VGA/UXGA on a 15‑pin HD connector; Audio: 1 unbalanced stereo audio on a 3.5mm mini jack (TP‑125); 1 RJ‑45 OUT connector (TP‑126). 1 RJ‑45 OUT connector (TP‑125); Video: 1VGA/UXGA on a 15‑pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack (TP‑126). RS‑232 on 2‑pin terminal block; maximum bitrate 19200bps. WUXGA & 1080p. Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <–80dB. Audio: Analog/analog: 0dB; Analog/ S/PDIF: –12dBFS. AC. <0.01%. 12V DC, 60mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK‑3T 19” rack adapter. Ltd DIRECTORY OF PRODUCTS 2011/2012 WWW.KRAMERELECTRONICS.COM RANGE EXTENDERS & REPEATERS  TRANSMITTERS & RECEIVERS  COMPUTER (15‑PIN HD)