Transcript
TP200 User guide
HDsx
®
High Definition Sound Expansion
TP TUBE
QUICK GUIDE
The box contains: 1 x TP200 One-Point-Speaker 1 x Power Cord 230V (2m) 1 x Table Stand 1 x User guide 230V
AUX
All sound sources using MiniJack 3.5 output. RCA / line / phono, can be used with an adapter (accessory) General amplifier output can also be used with an adapter (accessory)
Toslink S/PDIF
USB
(( (
(( ( Bluetooth
TV - Amplifiers - CD Players - AppleTV - Playstation and many more .... BT connections: iPhone/iPod/iPad Android phones/tablets WindowsPhone/tablets PC Mac/Macbook .... And other sources that can be paired and play via Bluetooth. USB from PC/Mac ”USB on-the-go”
1
2
AUX/Line - Green light
Bluetooth - Blue light
Toslink/SPDIF - White light
USB - Purple light
Connect your player with Mini Jack. To play through the mini-jack 3.5 input, simply select AUX source (green light) using the SOURCE button
+ Increases volume - lowers volume SOURCE - switch on and selects the input / source. A single short press switches the source - the source selected is shown by a color. (Keeping button pressed activates standby) The last used source is selected automatically, when turned on from standby mode. If there is no sound on the selected source. The SOURCE-button blinks slowly. (approximately 2 times / sec)
AUX Bluetooth Toslink USB Standby
-
Reset to factory settings
3
Connect your source with optical cable. To play via Toslink / SPDIF input, simply select Toslink source (White light) using the SOURCE button. Using optical input for TV, we suggest using the remote control (Accessory)
Green Blue White Purple Red –
To play via BT, your player has to be paired with TP200. To do this, simply select the BT source with the Source button and then find -and choose TP200 + (serial number) in your Bluetooth menu on your BT-player-device (see its manual) Your device is now paired with TP200 - This is shown by the blue light going steady, insted of blinking. You are now ready to play audio from your Bluetooth device (see its manual)
+
1 - Disconnect power (230V) 2 - Press and hold all 3 buttons at the same time 3 - While holding the 3 buttons - reconnect Power (230V) 4 - Release the 3 buttons. All Bluetooth parring and other settings are now reset to factory settings.
Connect your source with USB kabel. To play via the USB input, simply select the USB source (Purple Light) using the SOURCE button. Audio playback via USB (see computer / player manual) Adjustment and update via USB - see ”Features & Options” 4
FEATURES & OPTIONS
FEATURES & OPTIONS
Front - With different colors, it is possible to give TP200 your own
Adjustment / Update via USB - Software for adjusting / Update is available on our website: www.tptube.dk/en/customer-service/download/ Connect TP200 to a computer via USB.
Wall Bracket - In the need of hanging your TP200 on the wall? you
-Download The setup-program -Open The setup program In the program these features can now be adjusted
unique expression. The front (optional) can be removed and changed to another color. (Always supplied with Black front)
can use OP201 (optional accessory)
Table Stand - Mandatory in the box with TP200 Remotecontrol - TPR1 (optional accessory) allows you to remotely
control volume and other functions. Enable the patented HDSX® function which is an audio feature that expands the stereo image. Or adjust the loudness and other functions With the remote control, these functions are available. HDSX® On/Off Source toggle Loudness adjust TTC - Tone Tilt Control Bluetooth - Play/Pause/Forward/Back Mute/Sub-bas On/Off Volume up/down
Loudness Tone Tilt Control HDSX on / off equalizer Auto Level - Analog etc. - These functions can be changed ”live” while playing on the speaker. On the remote control (TPR1) the same functions can be changed (equalizer and auto level, excepted), but the changes made in the setup program will be the default setting on the remote’s ”reset button” Reset to factory settings - see page 3 Software update -Download Latest software version on: www.tptube.dk/en/customer-service/download/ -Follow The instructions on the website
Limiter - To protect the devices and drivers, TP200 has a built in limiter, which prevents damaging the speaker at high volume. - This is warned with flashing red light in the indicator.
Dynamic Loudness - Controlled by the built-in DSP 5
See also our FAQ på www.tptube.dk/en/faq/
6
TP TUBE Safety - TP200 should not come in contact with water, nor vases containing water. - To avoid injury, always place TP200 securely. This applies table stand, floor stand or wall bracket. - To switch off the appliance, disconnect from the power socket. - Keep distance during audio playback - loud sound can cause permanent hearing damage.
Declaration of EC-Conformity We: TP Radio Agenavej 37, 2670 Greve, Denmark Declare under our sole Responsibility that the Product: Product description:
Amplifier and stereo speaker
Model Name:
TP200
Conforms to the essential requirements of Directives 2011/65/EC 2006/95/EC 2004/108/EC 2009/125/EC
Restriction of Hazardous substances directive (RoHS) Low voltage directive (LVD) EMC directive Eco-design directive
RoHS directive:
EN 50581:2012
Applied standards and regulations:
LVD:
EN 60065:2002 with A1:2006, A11:2008, A2:2010, A12:2011 EN 62479:2010
EMC directive:
EN 55032:2012 EN 61000-2-3:2006 with A1:2009, A2:2009 EN 61000-3-3:2008
Eco-design directive:
Commission regulation No 1275/2008
Technical Manager Agenavej 37, 2670 Greve Denmark. Tel: +45 4390 6048 Fax. +45 4390 5207 URL: www.tpradio.dk
Henrik Heise Pedersen Greve 27/2-2015
TP Tube Agenavej 35-37 / 2670 Greve DK /
[email protected] / www.tptube.dk Please share your audio experience with TP200 on our facebook site: www.facebook.com/tptube Information in this manual may change without notice. The latest version of the documentation is available on www.tptube.dk January 2015 All Rights Reserved
