Transcript
TQ TESTING
LOW PROFILE 2 FORM C RELAY
TQ RELAYS
FEATURES 26.7 1.051
9 .354 5+0.4 -0.2 .197+.016 -.008
9 .354
14 .551
5+0.4 -0.2 .197+.016 -.008
mm inch
• High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also available • M.B.B. contact types available
SPECIFICATIONS Characteristics
Contact Standard (B.B.M) type Arrangement
2 Form C
4 Form C
Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material
Rating
2 Form D
Gold-clad silver 1 A 30 V DC
Max. switching power (resistive load)
30 W, 62.5 V A
30 W
Max. switching voltage
110 V DC, 125 V AC
110 V DC
Max. switching current
Single side stable
Nominal operating power 1 coil latching
2 coil latching Mechanical (at 180 cpm) Expected 1 A 30 V DC life (min. Electrical (at 20 cpm) resistive opera(1 A 30 V 0.5 A 125 V AC tions) DC resistive) resistive
1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 280 mW 200 mW (3 to 24 V DC) (24 V DC) 400 mW 300 mW (48 V DC) (48 V DC) 100 mW (3 to 12 V DC) 150 mW (24 V DC) 200 mW (3 to 12 V DC) 300 mW (24 V DC)
200 mW
Initial breakdown voltage
1,000 Vrms for 1 min. (Detection current: 10 mA)
Between contact sets
1,000 Vrms for 1 min. (Detection current: 10 mA)
FCC surge voltage between open contacts
1,500 V
Operate time [Set time]*3 (at 20°C)
Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)]
Release time [Reset time]*4 (at 20°C)
Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)]
Temperature rise*2 (at 20°C)
—
—
108
107
2×105
105
105
—
Max. 50°C
Functional*5
Min. 490 m/s2 {50G}
Destructive*
Min. 980 m/s2 {100G}
Functional*7
176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm
Destructive
294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm
6
Ambient Conditions for temperature operation, transport and storage*9 (Not freezing and condensing at low Humidity temperature) Unit weight
Note:
Min. 10 µs.
—
M.B.B. time*8
Vibration resistance 400 mW
300 Vrms for 1 min. (Detection current: 10 mA)
Between contact and coil
Shock resistance 200 mW
750 Vrms for 1 min. (Detection current: 10 mA)
Between open contacts
1 A 30 V DC 0.5 A 125 V AC
M.B.B.type
Min. 1,000 MΩ (at 500 V DC)
Initial insulation resistance*1
50 mΩ
Nominal switching capacity (resistive load)
Min. switching capacity I1
Standard (B.B.M) type
M.B.B.type
2 Form C: 4 Form C:
–40°C to +70°C –40°F to +158°F
–40°C to +50°C –40°F to +122°F
5 to 85% R.H. Approx. 1.5 g .053 oz Approx. 3 g .106 oz.
—
I1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])
Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs.
*8 M.B.B. time:
Min. 10 µs
Measuring condition 500 Ω 5 V DC
*9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (see catalog).
en_ds_61020_0001: 100805J
1
TQ ORDERING INFORMATION EX. TQ Contact arrangement 2: 2 Form C 4: 4 Form C
2
H
L2
2M
Operating function
Terminal shape
3V MBB function
Nil: Standard PC board Nil: Single side stable Nil: Standard L: 1 coil latching terminal (B.B.M.) type H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type
Coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24, 48* V
*48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "-3" like TQ2-12V-3. 2. M.B.B. contact types are available only for TQ2 type.
TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Standard PC board terminal
Self-clinching terminal
TQ2-3 V
TQ2H-3 V
TQ2-4.5 V
TQ2H-4.5 V
TQ2-5 V
Nominal voltage, V DC
Pick-up voltage, V DC (max.)
Drop-out voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
3
2.25
0.3
46.7
64.3
140
4.5
4.5
3.38
0.45
31.1
144.6
140
6.7
TQ2H-5 V
5
3.75
0.5
28.1
178
140
7.5
TQ2-6 V
TQ2H-6 V
6
4.5
0.6
23.3
257
140
9
TQ2-9 V
TQ2H-9 V
9
6.75
0.9
15.5
579
140
13.5
TQ2-12 V
TQ2H-12 V
12
9
1.2
11.7
1,028
140
18
TQ2-24 V
TQ2H-24 V
24
18
2.4
8.3
2,880
200
36
TQ2-48 V
TQ2H-48 V
48
36
4.8
6.25
7,680
300
57.6
Nominal voltage, V DC
Set voltage, V DC (max.)
Reset voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
2. 1 Coil latching Part No. Standard PC board terminal
Self-clinching terminal
TQ2-L-3 V
TQ2H-L-3 V
TQ2-L-4.5 V
TQ2H-L-4.5 V
3
2.25
2.25
33.3
90
100
4.5
4.5
3.38
3.38
22.2
202.5
100
6.7
TQ2-L-5 V TQ2-L-6 V
TQ2H-L-5 V
5
3.75
3.75
20
250
100
7.5
TQ2H-L-6 V
6
4.5
4.5
16.7
360
100
9
TQ2-L-9 V
TQ2H-L-9 V
9
6.75
6.75
11.1
810
100
13.5
TQ2-L-12 V
TQ2H-L-12 V
12
9
9
8.3
1,440
100
18
TQ2-L-24 V
TQ2H-L-24 V
24
18
18
6.3
3,840
150
36
Nominal voltage, V DC
Set voltage, V DC (max.)
Reset voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
3. 2 Coil latching Part No. Standard PC board terminal
Self-clinching terminal
TQ2-L2-3 V
TQ2H-L2-3 V
TQ2-L2-4.5 V
TQ2H-L2-4.5 V
3
2.25
2.25
66.7
45
200
4.5
4.5
3.38
3.38
44.4
101.2
200
6.7
TQ2-L2-5 V TQ2-L2-6 V
TQ2H-L2-5 V
5
3.75
3.75
40
125
200
7.5
TQ2H-L2-6 V
6
4.5
4.5
33.3
180
200
9
TQ2-L2-9 V
TQ2H-L2-9 V
9
6.75
6.75
22.2
405
200
13.5
TQ2-L2-12 V
TQ2H-L2-12 V
12
9
9
16.7
720
200
18
TQ2-L2-24 V
TQ2H-L2-24 V
24
18
18
12.5
1,920
300
28.8
Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.
2
en_ds_61020_0001: 100805J
TQ 4 Form C type 1. Single side stable Part No. Standard PC board terminal
Self-clinching terminal
TQ4-3 V
TQ4H-3 V
TQ4-4.5 V
TQ4H-4.5 V
TQ4-5 V
Nominal voltage, V DC
Pick-up voltage, V DC (max.)
Drop-out voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC 4.5
3
2.25
0.3
93.8
32
280
4.5
3.38
0.45
62.2
72.3
280
6.7
TQ4H-5 V
5
3.75
0.5
56.2
89
280
7.5
TQ4-6 V
TQ4H-6 V
6
4.5
0.6
46.5
129
280
9
TQ4-9 V
TQ4H-9 V
9
6.75
0.9
31.1
289
280
13.5
TQ4-12 V
TQ4H-12 V
12
9
1.2
23.3
514
280
18
TQ4-24 V
TQ4H-24 V
24
18
2.4
11.7
2,056
280
36
TQ4-48 V
TQ4H-48 V
48
36
4.8
8.3
5,760
400
57.6
Nominal voltage, V DC
Set voltage, V DC (max.)
Reset voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
2. 1 Coil latching Part No. Standard PC board terminal
Self-clinching terminal
TQ4-L-3 V
TQ4H-L-3 V
TQ4-L-4.5 V
TQ4H-L-4.5 V
3
2.25
2.25
66.6
45
200
4.5
4.5
3.38
3.38
44.4
101.2
200
6.7
TQ4-L-5 V TQ4-L-6 V
TQ4H-L-5 V
5
3.75
3.75
40
125
200
7.5
TQ4H-L-6 V
6
4.5
4.5
33.3
180
200
9
TQ4-L-9 V
TQ4H-L-9 V
9
6.75
6.75
22.2
405
200
13.5
TQ4-L-12 V
TQ4H-L-12 V
12
9
9
16.7
720
200
18
TQ4-L-24 V
TQ4H-L-24 V
24
18
18
8.3
2,880
200
36
Nominal voltage, V DC
Set voltage, V DC (max.)
Reset voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
3. 2 Coil latching Part No. Standard PC board terminal
Self-clinching terminal
TQ4-L2-3 V
TQ4H-L2-3 V
TQ4-L2-4.5 V
TQ4H-L2-4.5 V
3
2.25
2.25
133
22.5
400
4.5
4.5
3.38
3.38
88.9
50.6
400
6.7
TQ4-L2-5 V TQ4-L2-6 V
TQ4H-L2-5 V
5
3.75
3.75
80
62.5
400
7.5
TQ4H-L2-6 V
6
4.5
4.5
66.6
90
400
9
TQ4-L2-9 V
TQ4H-L2-9 V
9
6.75
6.75
44.4
202.5
400
13.5
TQ4-L2-12 V
TQ4H-L2-12 V
12
9
9
33.3
360
400
18
TQ4-L2-24 V
TQ4H-L2-24 V
24
18
18
16.7
1,440
400
36
Notes: 1. Specified value of the pick-up, drop-out, voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 25 pcs.; Case: 500 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. 1 coil latching and 2 coil latching types are also available by request. Please consult us for details. 5. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.
2. M.B.B. type Single side stable Part No. Standard PC board terminal
Self-clinching terminal
TQ2-2M-3 V
TQ2H-2M-3 V
TQ2-2M-4.5 V
TQ2H-2M-4.5 V
TQ2-2M-5 V
TQ2H-2M-5 V
TQ2-2M-6 V
TQ2H-2M-6 V
TQ2-2M-9 V
Nominal voltage, V DC
Pick-up voltage, V DC (max.)
Drop-out voltage, V DC (min.)
Nominal operating current, mA (±10%)
Coil resistance, Ω (±10%)
Nominal operating power, mW
Max. allowable voltage, V DC
3
2.4
0.3
66.7
45
200
4.5
4.5
3.6
0.45
44.4
101
200
6.7
5
4
0.5
40
125
200
7.5
6
4.8
0.6
33.3
180
200
9
TQ2H-2M-9 V
9
7.2
0.9
22.2
405
200
13.5
TQ2-2M-12 V
TQ2H-2M-12 V
12
9.6
1.2
16.7
720
200
18
TQ2-2M-24 V
TQ2H-2M-24 V
24
19.2
2.4
8.3
2,880
200
36
Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.
en_ds_61020_0001: 100805J
3
TQ DIMENSIONS
mm inch
1) 2 Form C, 2 Form D Standard PC board terminal 4.75 .187
14 .551
PC board pattern (Copper-side view)
9 .354
10.16 .400
2.54 .100
10-1.0 dia. 10-.039 dia
5 +0.4 −0.2 .197 +.016 −.008
2.54 .100 7.62 .300
3.5 .138 0.25 .010
2.54 .100
0.5 .020
0.25 .010
7.62 .300
Tolerance: ±0.1 ±.004
Self-clinching terminal 4.75 .187 5 +0.4 −0.2 .197 +.016 −.008
14 .551
Schematic (Bottom view) • Single side stable (Deenergized condition)
9 .354
3.5 .138
1
+ 0.25 .010
2.54 .100
0.5 .020
0.25 .010
7.62 .300
−
2
10 9
3
8
4
7
• 1-coil latching (Reset condition)
5
− +
6
Direction indication*
1
2
3
4
• 2-coil latching (Reset condition)
5
1
2
3
4
+
−
+ 10 9
8
7
6
10 9
Direction indication*
5
−
8
7
6
Direction indication*
*Orientation stripe typical-located on top of relay
General tolerance: ±0.3 ±.012
2) 4 Form C Standard PC board terminal 5 +0.4 −0.2 .197 +.016 −.008
26.7 1.051
4.75 .187
PC board pattern (Copper-side view)
9 .354
22.86 .900 2.54 .100
5.08 .200
16-1.0 dia. 16-.039 dia
3.5 .138 0.25 .010
5.08 .200
0.5 .020
2.54 .100
7.62 .300
2.54 .100 7.62 .300
0.25 .010
Tolerance: ±0.1 ±.004
Self-clinching terminal 5 .197
26.7 1.051
4.75 .187
Schematic (Bottom view) • Single side stable (Deenergized condition)
9 .354
+0.4 −0.2 +.016 −.008
3.5 .138
+ 0.25 .010
5.08 .200
0.5 .020
2.54 .100
7.62 .300
0.25 .010
1
3 4 5 6 7 8 10
20
181716 151413 11
Direction indication*
−
• 1-coil latching (Reset condition) −
1
3 4 5 6 7 8 10
20
181716 151413 11
Direction indication*
• 2-coil latching (Reset condition) +
1
3 4 5 6 7 8 10
+ 20
181716 151413 11
+
− −
Direction indication*
*Orientation stripe typical-located on top of relay
General tolerance: ±0.3 ±.012
REFERENCE DATA 1. Maximum switching capacity
2. Life curve
3. Mechanical life
1.0
0.5 0.4 0.3
30 V DC resistive load
100
125 V AC resistive load
10
0.2
30
4
100 200 Switching voltage,V
0
0.5 1.0 Switching current, A
Ratio against the rated voltage, %V
DC load (cosϕ=1) AC load (cosϕ=1)
No. of operations, ×104
Switching current, A
Tested sample: TQ2-12V, 10 pcs. 100 90 80
Pick-up voltage
70 60
Max. Min.
50 40
Drop-out voltage
30
Max.
20 Min.
10 0
10
100 1,000 10,000 No. of operations, ×104
en_ds_61020_0001: 100805J
TQ 4.-(1) Electrical life (DC load)
4.-(2) Electrical life (AC load)
Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm
Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm 100
90
90
Pick-up voltage
Max.
70
Min.
60 50 40
Drop-out voltage
Max.
30 20
Min.
70 60 50
Max.
40 Min.
30 20
10
10 0
5
10 15 No. of operations, ×104
20
Change of contact resistance
0
5
10 15 No. of operations, ×104
50 40
Max.
30
Min.
20 10 0
5 No. of operations, ×104
Min.
50 40
Drop-out voltage
60 50
1A
40
1A 0A
30
Min.
20 10 0
5 No. of operations, ×104
60 50 1A
40
0A
30 20
10
10
0
10
70
20
10
Max.
30
20
Nominal coil voltage 3 to 12 V DC type 24 V DC type
Max.
60
Tested sample: TQ4-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F
Temperature rise, °C
60
Pick-up voltage
70
5.-(2) Coil temperature rise (4C)
70
70
80
Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F
90 80
90
5.-(1) Coil temperature rise (2C)
100 Contact resistance, mΩ
80
100
Temperature rise, °C
80
Change of pick-up and drop-out voltage Ratio against the rated voltage, %V
Change of contact resistance
100 Contact resistance, mΩ
Ratio against the rated voltage, %V
Change of pick-up and drop-out voltage
0
100 110 120 130 140 150 Coil applied voltage, %V
100 110 120 130 140 150 Coil applied voltage, %V
6.-(1) Operate/release time characteristics
6.-(2) Operate/release time characteristics
7. Distribution of pick-up and drop-out voltages
Tested sample: TQ2-12V, 10 pcs.
Tested sample: TQ4-12V, 10 pcs.
Tested sample: TQ2-12V, 50 pcs.
6
4 3 Operate time 2 Max. Min. Max. Min.
Release time
1 0
80
90 100 110 120 Coil applied voltage, %V
30 Pick-up voltage Drop-out voltage
5 4
20 Quantity
5
Operate/release time, ms
Operate/release time, ms
6
3 Operate time 2 1 0
Release time 80
10
Max. Min. Max. Min.
90 100 110 120 Coil applied voltage, %V
0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V
9. Ambient temperature characteristics
10. Distribution of contact resistance
Tested sample: TQ2-L2-12V, 35 pcs.
Tested sample: TQ2-12V, 5 pcs.
Tested sample: TQ2-12V, 30 pcs. (30×4 contacts)
;yy;y;y;y;y; y;y;y;y;y;y; ;yy;;y y; y; y; y;
30 Set voltage
20
10
0
y;y;y;y;y;y; y;yy;;y;yy;;y;y;y;
Quantity
Reset voltage
10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V
en_ds_61020_0001: 100805J
40 40
Drop-out voltage
20 -40 -20
0
− x − x
Pick-up voltage 20 40 60 80 Ambient temperature,°C -20
30 Quantity
Variation ratio,%
8. Distribution of set and reset voltage
20
10 -40
0
30
40 50 Contact resistance, mΩ
5
TQ 11.-(1) High-frequency characteristics
11.-(2) High-frequency characteristics
11.-(3) High-frequency characteristics
Isolation characteristics
Insertion loss characteristics
V.S.W.R. 3.0
50
10
100 Frequency,MHz
2.4 1.0 0.8
1.6 1.4
0.2
1.2
0
1,000
10
100 Frequency,MHz
Tested sample: TQ2-L-12V, 6 pcs.
980m/s2 , Z
, ,Z XX Y Z 980m/s2 Y, Y
Deenergized condition Energized condition Z 980m/s2
196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y
Reset state Set state Z 980m/s2
X 980m/s2
196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y
980m/s2 , Z
980m/s2 , X
1.0
1,000
12.-(2) Malfunctional shock (latching)
X
1.8
0.4
Tested sample: TQ2-12V, 6 pcs.
980m/s2
2.0
0.6
12.-(1) Malfunctional shock (single side stable)
, ,Z XX Y Z 980m/s2 Y, Y
2.2
V.S.W.R.
100
2.6
980m/s2 , X
0
10
13.-(3) Influence of adjacent mounting
1
Pick-up voltage
ON
ON
0 –10
ON OFF OFF
10
Drop-out voltage
0 OFF
–10 0
13.-(2) Influence of adjacent mounting
0.5 Frequency,GHz
13.-(1) Influence of adjacent mounting
Rate of change, % Rate of change, %
Insertion loss, dB
Isolation, dB
2.8
5 .197 Inter-relay distance
, mm inch
14.-(1) Contact reliability (1 mA 5 V DC resistive load)
Pick-up voltage
ON
0 ON
–10
ON
10
Drop-out voltage
OFF
0 OFF
–10 0
OFF
5 .197 Inter-relay distance
10
Pick-up voltage
F(t), % 99.9 99.0 95.0
ON
0
ON
–10
ON
70.0 50.0 30.0 ON
10
10.0 5.0
Drop-out voltage OFF
0
2.0 1.0 0.5
OFF OFF
–10
, mm inch
5 .197 Inter-relay distance
15. Actual load test (35 mA 48 V DC wire spring relay load)
Tested sample: TQ2-12V Condition: Detection level 100 Ω
Circuit
100
20Hz
500Ω
10.0 5.0
0.2 0.1 1.0
6
100
Change of pick-up and drop-out voltage
70.0 50.0 30.0
2.0 1.0 0.5
10 No. of operations, ×106
, mm inch
14.-(2) Contact reliability (100 µA 5 V DC resistive load) F(t), % 99.9 99.0 95.0
m=2.15 µ=2.7×107 95% reliability limit = 7.6×106 (Weibull probability paper)
0.2 0.1 1.0
OFF
0
m=1.4 µ=16.4×107 95% reliability limit = 19.5×106 (Weibull probability paper) 10 No. of operations, ×107
100
48 V DC
500Ω Wire spring relay Circuit diagram
Ratio against the rated voltage, %V
10
Rate of change, % Rate of change, %
Rate of change, % Rate of change, %
Tested sample: TQ2-12V Condition: Detection level 10 W
90 80
Pick-up voltage
70
Max. Min.
60 50 40 30
Drop-out voltage
20 10 0
10
20 30 40 No. of operations, ×104
Max. Min. 50
en_ds_61020_0001: 100805J
TQ 16. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage
Change of contact resistance 100
70 60 50 40
Max.
30
Min.
20 10 0
10
20 30 40 No. of operations, ×104
100
90 80
Pick-up voltage
Max. Min.
70 60 50 40 30
Drop-out voltage
20
Max. Min.
10 0
50
500
1,000
1,500
2,000
No. of operations, ×104
Contact resistance, mΩ
80
Ratio against the rated voltage, %V
100
90 Contact resistance, mΩ
Change of contact resistance
90 80 70 60
Max.
50 40 30
Min.
20 10 0
500
1,000 1,500 2,000 No. of operations, ×104
17.-(1) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 2-3-4: ON
Terminal Nos. 2-3-4: OFF
− x:105.6 µs 3σn-1: 163.8 µs Min.: 23 µs Max.:243 µs
30
26
20
50
7
10 50
100 150 200 250 300 350 µs max.
100 150 200 250 300 µs min. ~
0
~
100 150 200 250 300 350 µs max.
~
50
~
~
100 150 200 250 300 µs min. ~
10
~
~
50
10
10
4
~
17
10 0
27
~
19
~
19
41
~
30 20
50 40
40
− x:71.6 µs 3σn-1: 127.1 µs Min.: 17 µs Max.:187 µs
~
50
60
~
60
17.-(2) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 7-8-9: ON 60
Terminal Nos. 7-8-9: OFF
− x:115.6 µs 3σn-1: 167.3 µs Min.:35 µs Max.:254 µs
50
30
50
30
21
20
15
12 10
4
2
100 150 200 250 300 µs min. ~
100 150 200 250 300 350 µs max.
~
50
~
50
1
10
~
0
~
~
~
100 150 200 250 300 µs min. ~
100 150 200 250 300 350 µs max.
~
50
~
10
~
2
~
6
~
11
10
50
35 31
~
30
0
− x:80.7 µs 3σn-1: 156.7 µs Min.: 29 µs Max.:298 µs
40
40
20
60
For Cautions for Use, see Relay Technical Information (see catalog).
en_ds_61020_0001: 100805J
7
