Transcript
8
5
6
7
4
2
3
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ARDENT CONCEPTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ARDENT CONCEPTS, INC. IS PROHIBITED.
3.00
DESCRIPTION
REV.
A
2.25 CL
DATE
ECN13-1305, RELEASED
APPROVED
BMS
11-7-13
DIMENSION A (SEE SHEET 2)
D
D
STRAIN RELIEF 1.00mm TOOLING PIN
1mm TOOLING PIN
CHANNEL #12 45.00 MOUNITNG
CHANNEL #13 2.54 TYP CHANNEL #18 CHANNEL #7
C
CL
M2X20 SOCKET HEAD CAPTIVE SCREW 3 PLACES
1.5mm TOOLING PIN M2 FLAT WASHER 3 PLACES
50.50 CHANNEL #6
CHANNEL #19
CHANNEL #1
C
TELEDYNE STORMFLEX 047 COAXIAL CABLE
6.60
38.00
CHANNEL #24
4
CHANNEL MARKERS 24 PLACES 2.55 GROUND CONTACTS BOLT CIRCLE DIA TYPICAL
2
24 PLACES CONNECTOR SEE TABLE SHEET 2
5
NOTE: 1. 24 CHANNEL, 50 OHM CABLE ASSEMBLY 2. CABLE CONNECTOR BANDWIDTH 40Ghz @ -2db (WITH 6" CABLE)_ 3. CABLE CONNECTOR RETURN LOSS -20db THRU 20Ghz, -15db THRU 40GHz 4. CABLES TO BE PHASE MATCHED WITHING +/- 2 ps 5. SPICE FILES AVAILABLE FOR DEMBEDDING CABLE LOSSES 6. CROSS TALK AT PCB TRANSITION -50dB TO 30GHz, -40dB TO 40Ghz 7. THIS IS A TABULATED DRAWING, MORE DETAIL FOUND ON THE TABLE ON SHEET 2
2.25 7.00
PART NUMBER M10PHCS03 IA24X2-2.54-TSBM-1 SB24X2-1 BA24X2-2.54-XXXX-1 SC24X2-1 080FHCS0250 8
B
3
1.5MMX45 CHAMFER CHANNEL 1
1 2 3 4 5 6
6
6
1.50mm TOOLING PIN
ITEM NO.
1
1
3.00
B
A
1 REVISIONS
PROPRIETARY AND CONFIDENTIAL
ON BOTTOM COVER/ QTY. 2 1 1 1 1 2 7
METRIC
UNLESS OTHERWISE SPECIFIED. TOLERANCES:
DESCRIPTION CHANGE
M1 PHILLIPS HEAD SCREW X 3mm L (SER) INTERFACE ASSEMBLY STIFFENER BLOCK, PRESS IN BLOCK ASSEMBLY SHIPPING COVER #0-80 FLAT HEAD X 1/4" L 6
5
MATERIAL:
NOTE
PROJECTION SIZE
B
---
FINISH:
ANGLES:
3
X.X = .1 X.XX = .05 X.XXX = .025
TITLE:
DWG. NO.
ANSI Y14.5M 1982
REV
3
A
TR24X2-2.54-XXXX-1 SCALE: 2:1
WWW.ARDENTCONCEPTS.COM
4
A
24 CHANNEL, 2.54mm PITCH TERMINATE-R CABLE ASSEMBLY DRAWING
INTERPRET GEOMETRIC TOLERANCING PER:
---
130 LEDGE ROAD, UNIT 2 SEABROOK, NH 03874 (603) 474-1760
2
SHEET 1 OF 2 1
8
7
5
6
4
2
3
1 REVISIONS
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ARDENT CONCEPTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ARDENT CONCEPTS, INC. IS PROHIBITED.
REV.
DESCRIPTION
A
ECN13-1305, RELEASED
DATE
APPROVED
BMS
11-7-13
D
D
3.51 7 A
A
3.81 SECTION A-A
C
C
TERMINATE‐R BLOCK ASSEMBLY ASSEMBLY PART PART NUMBER NUMBER TR24X2‐2.54‐06KF‐1 BA24X2‐2.54‐06KF‐1 TR24X2‐2.54‐06KM‐1 BA24X2‐2.54‐06KM‐1 TR24X2‐2.54‐06VF‐1 BA24X2‐2.54‐06VF‐1 TR24X2‐2.54‐06VM‐1 BA24X2‐2.54‐06VM‐1 TR24X2‐2.54‐12KF‐1 BA24X2‐2.54‐12KF‐1 TR24X2‐2.54‐12KM‐1 BA24X2‐2.54‐12KM‐1 TR24X2‐2.54‐12VF‐1 BA24X2‐2.54‐12VF‐1 TR24X2‐2.54‐12VM‐1 BA24X2‐2.54‐12VM‐1 TR24X2‐2.54‐24KF‐1 BA24X2‐2.54‐24KF‐1 TR24X2‐2.54‐24KM‐1 BA24X2‐2.54‐24KM‐1 TR24X2‐2.54‐24VF‐1 BA24X2‐2.54‐24VF‐1 TR24X2‐2.54‐24VM‐1 BA24X2‐2.54‐24VM‐1
B
CABLE LENGTH STRAIN RELIEF PART ("A") DIMENSION NUMBER 6" 6" 6" 6" 12" 12" 12" 12" 24" 24" 24" 24"
SR24X2‐2.54‐06KF‐1 SR24X2‐2.54‐06KM‐1 SR24X2‐2.54‐06VF‐1 SR24X2‐2.54‐06VM‐1 SR24X2‐2.54‐12KF‐1 SR24X2‐2.54‐12KM‐1 SR24X2‐2.54‐12VF‐1 SR24X2‐2.54‐12VM‐1 SR24X2‐2.54‐24KF‐1 SR24X2‐2.54‐24KM‐1 SR24X2‐2.54‐24VF‐1 SR24X2‐2.54‐24VM‐1
CABLE CONNECTOR TYPE 2.92mm K FEMALE (JACK) 2.92mm K MALE (PLUG) 1.85mm V FEMALE (JACK) 1.85mm V MALE (PLUG) 2.92mm K FEMALE (JACK) 2.92mm K MALE (PLUG) 1.85mm V FEMALE (JACK) 1.85mm V MALE (PLUG) 2.92mm K FEMALE (JACK) 2.92mm K MALE (PLUG) 1.85mm V FEMALE (JACK) 1.85mm V MALE (PLUG)
B
METRIC
UNLESS OTHERWISE SPECIFIED. TOLERANCES:
CHANGE
NOTE
PROJECTION
ANGLES:
A
MATERIAL:
SIZE
B
---
FINISH:
3
X.X = .1 X.XX = .05 X.XXX = .025
16 CHANNEL, 2.54mm PITCH TERMINATE-R CABLE ASSEMBLY DRAWING DWG. NO.
ANSI Y14.5M 1982
REV
7
6
5
4
3
A
TR24X2-2.54-XXXX-1 SCALE: 2:1
WWW.ARDENTCONCEPTS.COM
8
A
TITLE:
INTERPRET GEOMETRIC TOLERANCING PER:
---
130 LEDGE ROAD, UNIT 2 SEABROOK, NH 03874 (603) 474-1760
2
SHEET 2 OF 2 1
