Tracked Excavator | Js260 Nlc/sc/lc/xd

Transcript

TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD MAX. OPERATING WEIGHT: 27750 kg (61178 lb) ENGINE POWER: 147 kW (197 hp) E H I J F G J S 2 6 0 K M L C A D B STATIC DIMENSIONS – JS260 NLC/SC/LC MONOBOOM Dimensions in millimetres (ft-in) A Track length on ground Dipper lengths NLC SC LC 3840 (12-7) 3460 (11-4) 3840 (12-7) Dimensions in mm (ft-in) 2.00m (6ft 7in) 2.44m (8ft 0in) 3.09m (10ft 2in) 3.53m (11ft 7in) 4640 (15-3) 4260 (14-0) 4640 (15-3) E Transport length with Monoboom 10083 (33-0) 10060 (33-0) 9960 (32-8) 10010 (32-10) C Track gauge 2390 (7-10) 2390 (7-10) 2590 (8-6) F Transport height with Monoboom 3173 (10-5) 3230 (10-7) 3050 (10-0) 3220 (10-7) D Width over tracks (600 shoes) 2990 (9-10) 2990 (9-10) 3190 (10-6) D Width over tracks (700 shoes) 3090 (10-2) 3090 (10-2) 3290 (10-9) Dimensions in millimetres (ft-in) D Width over tracks (800 shoes) 3190 (10-6) 3190 (10-6) 3390 (11-1) G Counterweight clearance D Width over tracks (900 shoes) 3290 (10-9) 3290 (10-9) 3490 (11-5) H Tailswing radius B Undercarriage overall length 1125 (3-8) 3000 (9-10) I Width of superstructure 2500 (8-2) J Height over cab 2980 (9-10) K Height over grabrail 3059 (10-0) L Ground clearance M Track height 486 (1-7) 940 (3-1) TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD MAX. OPERATING WEIGHT: 28950 kg (63824 lb) ENGINE POWER: 147 kW (197 hp) E H I K J F G TAB J S 2 6 0 M L C A D B STATIC DIMENSIONS – JS260 NLC/SC/LC T.A.B. Dimensions in millimetres (ft-in) A Track length on ground B Undercarriage overall length NLC SC LC 3840 (12-7) 3460 (11-4) 3840 (12-7) Dipper lengths Dimensions in mm (ft-in) 2.00m (6ft 7in) 2.44m (8ft 0in) 3.09m (10ft 2in) 3.53m (11ft 7in) 4640 (15-3) 4260 (14-0) 4640 (15-3) E Transport length 10090 (33-1) 10210 (33-6) 10170 (33-4) 10170 (33-4) C Track gauge 2390 (7-10) 2390 (7-10) 2590 (8-6) F Transport height 3785 (12-5) 3270 (10-9) 3140 (10-4) 3290 (10-10) D Width over tracks (600 shoes) 2990 (9-10) 2990 (9-10) 3190 (10-6) D Width over tracks (700 shoes) 3090 (10-2) 3090 (10-2) 3290 (10-9) Dimensions in millimetres (ft-in) D Width over tracks (800 shoes) 3190 (10-6) 3190 (10-6) 3390 (11-1) G Counterweight clearance D Width over tracks (900 shoes) 3290 (10-9) 3290 (10-9) 3490 (11-5) H Tailswing radius 1125 (3-8) 3000 (9-10) I Width of superstructure 2500 (8-2) J Height over cab 2980 (9-10) K Height over grabrail 3059 (10-0) L Ground clearance M Track height 486 (1-7) 940 (3-1) TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD ENGINE Model Type Rated power (ISO 14899 (SAE J1995)) Piston Displacement Air Filtration Cooling Starting system Batteries Alternator Refuelling pump Isuzu 4HK1X European Tier 3 emissions compliant. Water cooled, 4-stroke, 4-cylinder in-line, direct injection, turbocharged diesel. 147kW (197hp) at 2000rpm. 5.193 litres. Dry element with secondary safety element and in-cab warning indicator. Water cooled via large capacity radiator. 24 volt. 2 x 12 volt Heavy duty. 24 volt 40 amp. Electric type. SWING SYSTEM Swing motor Swing brake Final drive Swing speed Swing gear Swing lock Axial piston type. Hydraulic braking plus automatic spring applied disc type parking brake. Planetary reduction. 10.6 rpm. Large diameter, internally toothed fully sealed grease bath lubricated. Multi position switchable brake. UNDERCARRIAGE Carriage options Construction Recovery point Track type Track shoe options Upper & lower rollers Track adjustment Track idler SC-Standard, LC-Long Carriage and NLC-Narrow Long Carriage. Fully welded, ‘X’ frame type with central bellyguarding . and sloping sidemembers with dirt relief holes under top rollers. Front and rear. Sealed and lubricated. 600mm (24in), 700mm (28in), 800mm (31in), 900mm (35in). Heat treated, sealed and lubricated. Grease cylinder type. Sealed and lubricated, with spring cushioned recoil. No. of track guides No. of lower rollers No. of upper rollers No. of track shoes SC 2 per side 7 per side 2 per side 47 per side NLC & LC 2 per side 9 per side 2 per side 51 per side HYDRAULIC SYSTEM A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open centre control. Pumps Main pumps Maximum flow Servo pump Maximum flow 2 variable displacement axial piston type. 2 x 226 L/min (2 x 49.7 UK GPM). Gear type. 21.5 L/min (4.7 UK GPM). Control valve A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom, dipper and bucket services for greater speed and efficiency. Relief valve settings Boom/Arm/Bucket With power boost Swing circuit Travel circuit Pilot control 343 bar (4975lbf/sq.in) 373 bar (5410lbf/sq.in) 289 bar (4192lbf/sq.in) 343 bar (4975lbf/sq.in) 40 bar (569lbf/sq.in) Hydraulic cylinders Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper and bucket rams. Filtration The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life. In tank 150 micron, suction strainer. Main return line 10 micron, fibreform element. Plexus bypass line 1.5 micron, paper element. Pilot line 10 micron, paper element. Hydraulic hammer return 10 micron, reinforced microform element. Cooling Worldwide cooling is provided via a full return line air blast cooler as part of a single face cooling pack, in conjunction with the engine water cooler. Intercooler. TRACK DRIVE Type Travel motors Final drive Service brake Park brake Gradeability Travel speed Tractive effort Fully hydrostatic, three speed with autoshift. Variable swash axial piston type, fully guarded within undercarriage frame. Planetary reduction, bolt-on sprockets. Hydraulic counter balance valve to prevent overspeeding on gradients. Disc type, spring applied, automatic hydraulic release. 70% (35 deg) continuous. High – 5.6 km/h (3.4 mph). Mid – 3.3 km/h (2.0 mph). Low – 2.3 km/h (1.4 mph). 197.1kN (20098kgf, 44309lbf). TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD EXCAVATOR END – MONOBOOM Monoboom available along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height, tearouts and site versatility. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. Strong, durable construction, large cross sections and multi plate fabrications to withstand high stress applications. The 5.85m (19ft 2in) boom is designed to ensure the optimum digging envelope when matched with the three dipper lengths. Low maintenance bronze alloy bushes with graphite plugs are fitted to boom base and boom to dipper pivots resulting in 1000 hour greasing intervals at these points. EXCAVATOR END – T.A.B. Triple articulated boom available along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height, tearouts and site versatility. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. Strong, durable construction, large cross sections and multi plate fabrications to withstand high stress applications. The boom is designed to ensure the optimum digging envelope when matched with the three dipper lengths. AMS – ADVANCED MANAGEMENT SYSTEM Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximise productivity and efficiency. A (Auto) Up to 100% engine power and 100% flow. Gives variable power and speed depending on the operator’s input, matching the demand for output and efficiency to the job. Power boost is automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after a period of inactivity (between 5 and 30 seconds as set by the operator) E (Economy) 80% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output. P (Precision) 55% engine power. 90% of hydraulic flow for fine control of grading operations. L (Lifting) 55% engine power. 63% of hydraulic flow with permanent power boost for maximum lifting power and control. The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while the three alternative modes give precise matching of application when specific tasks are undertaken. The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode, tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the job being carried out. The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever the hammer pedal is depressed. A maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in cab display. CAB Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted to improve in cab conditions. Fully opening front screen is very smooth to operate and as the lower screen is stored within the top screen frame it makes complete front screen opening easy, fast and convenient. Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen. Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available. Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control. Optional climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Optional radio with digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects operator from suns’ glare through front or top screens. CONTROLS Excavator Tracks Auxiliary Control isolation Engine speed Engine stop Horn All servo lever operated to ISO control pattern, independently adjustable to the seat. Individually servo operated by foot pedal or hand lever. Speed selection via joystick button. Via servo operated foot pedal. Via gate lock lever at cab entrance or panel switch. Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable auto-idle with adjustable time delay using AMS. Ignition key operated and seperate shut-down button. Operated via servo lever mounted button. TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD SERVICE CAPACITIES GENERAL PURPOSE EXCAVATOR BUCKETS Litres (UK gal) Fuel tank 343 (75.5) Engine coolant 26.8 (5.9) Engine oil 21.5 (4.7) Swing reduction gear 6.0 (1.3) Track reduction gear (each side) 4.7 (1.0) Hydraulic system 241 (53) Hydraulic tank 120 (26.4) WEIGHTS AND GROUND BEARING PRESSURES Figures include 1.14cu.m. bucket, operator and full fuel tank. JS260 Mono Undercarriage and shoe width mm (in) Weight/Ground bearing pressure NLC 600mm (24) 25440 kg (0.51 kg/sq.cm) SC 600mm (24) 24920 kg (0.56 kg/sq.cm) LC 700mm (28) 25790 kg (0.45 kg/sq.cm) JS260 TAB Undercarriage and shoe width mm (in) Weight/Ground bearing pressure NLC 600mm (24) 26840 kg (0.55 kg/sq.cm) SC 600mm (24) 26320 kg (0.59 kg/sq.cm) LC 700mm (28) 27190 kg (0.48 kg/sq.cm) All buckets are JCB – Esco type fully welded steel, with sealed, hardened steel pivot pins and replaceable wear parts. Max Width Capacity (SAE heaped) Weight 900mm (36in.) 0.77cu.m (1.0cu.yd.) 775kg (1709lb) 1100mm (43in.) 1.01cu.m (1.32cu.yd.) 857kg (1890lb) 1200mm (47in.) 1.13cu.m (1.49cu.yd.) 898kg (1980lb) 1500mm (59in.) 1.35cu.m (1.77cu.yd.) 936kg (2064lb) 1600mm (63in.) 1.46cu.m 1.91cu.yd.) 973kg (2145lb) STANDARD / OPTIONAL EQUIPMENT Standard Equipment: Engine fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Electric refuelling pump; Heavy duty alternator; Electrics isolator; Heavy duty batteries; Cab & engine soundproofing; Cab heater & screen demister; Tinted glass; Interior light; Coat hook; Cigarette lighter; Ashtray; Operator’s storage shelf; Removable floormat; Windscreen wash/wipe; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic cushion control; Boom/swing priority switch; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting brackets; Work lights – boom & mainframe mounted; Undercarriage belly guarding; Upper structure under covers; Swing system cover; Twin track guides; External mirrors; Handrail & non slip walk ways; Quick connect engine oil drain pipe; Front screen blind; Quick connect fuel tank drain pipe; Hinged engine under cover; Remote filter system. Optional Equipment: Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose buckets; Ditch/grading buckets; Quickhitch buckets; Hydraulic hammers; Auxiliary pipework (full and low flow); Climate control; Cab mounted & rear work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support adjustment; Lower screen wiper; Radio; High and low temperature hydraulic oil option. STANDARD EQUIPMENT FOR XTRA DUTY BUILDS Cab cage (FOPS level II); Visibowl pre-cleaner; Reinforced dipper; Reinforced bucket links; Impact buffer around upper structure; Heavy-duty 10mm underguards and trackmotor covers; Reinforced front light protection. TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD WORKING RANGE – JS260 NLC/SC/LC MONOBOOM 5.85m (19ft 2in) Monoboom m 2.00m (6ft 7in) 2.44m (8ft 0in) 3.09m (10ft 2in) 3.53m (11ft 7in) A Maximum digging reach m (ft-in) 9.19 (30-2) 9.64 (31-7) 10.27 (33-8) 10.69 (35-1) B m (ft-in) 8.99 (29-6) 9.45 (31-0) 10.01 (32-10) 10.52 (34-6) Maximum digging reach (on ground) C Maximum digging depth m (ft-in) 5.72 (18-9) 6.14 (20-2) 6.79 (22-3) 7.23 (23-8) D Maximum digging height m (ft-in) 8.84 (29-0) 9.23 (30-3) 9.62 (31-7) 9.85 (32-4) E Maximum dumping height m (ft-in) 6.15 (20-2) 6.47 (21-3) 6.83 (22-5) 7.05 (23-2) F Maximum vertical wall cut depth G Minimum swing radius Bucket rotation m (ft-in) 4.51 (14-9) 5.35 (17-7) 6.21 (20-4) 6.67 (21-10) m (ft-in) 4.02 (13-2) 3.99 (13-1) 3.87 (12-8) 3.88 (12-9) 180° 180° 180° 180° deg. kgf (lbf) 18272 (40285) 15484 (34136) 12248 (27002) 11198 (24685) Max. Bucket tearout (ISO 6015) kgf (lbf) 19574 (43154) 19574 (43154) 19574 (43154) B G 10 9 8 J S 2 6 0 Max. Dipper tearout (ISO 6015) A 19574 (43154) 7 J S 2 6 0 6 5 D 4 E 3 2 1 0 Metres Dipper length J S 2 6 0 C F 11 10 9 8 7 6 5 4 3 2 1 0 Metres TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD WORKING RANGE – JS260 NLC/SC/LC T.A.B. Dimensions in m (ft-in) 6.24m (20ft 6in) T.A. Boom m A Maximum digging reach m (ft-in) 9.78 (32-1) 10.22 (21-8) 10.87 (35-8) 11.29 (37-0) B m (ft-in) 9.59 (31-6) 10.05 (33-0) 10.70 (35-1) 11.13 (36-6) Maximum digging reach (on ground) 5.85 (19-2) 6.30 (20-8) 6.95 (22-10) 7.40 (24-3) m (ft-in) 10.81 (35-6) 11.25 (36-11) 11.79 (38-8) 12.12 (39-9) E Maximum dumping height m (ft-in) 7.70 (25-3) 8.15 (26-9) 8.70 (28-7) 8.93 (29-4) F Maximum vertical wall cut depth m (ft-in) 4.47 (14-8) 5.11 (16-9) 5.79 (19-0) 6.26 (20-6) m (ft-in) 3.06 (10-0) 3.23 (10-7) 2.82 (9-3) 2.89 (9-6) deg. 180° 180° 180° 180° Bucket rotation Max. Dipper tearout (ISO 6015) kgf (lbf) 18272 (40285) 15484 (34136) 12248 (27002) 11198 (24685) Max. Bucket tearout (ISO 6015) kgf (lbf) 19574 (43154) 19574 (43154) 19574 (43154) G 10 9 8 J S 2 6 0 m (ft-in) D Maximum digging height B TAB C Maximum digging depth G Minimum swing radius A 2.00m (6ft 7in) 2.44m (8ft 0in) 3.09m (10ft 2in) 3.53m (11ft 7in) J S 2 6 0 7 TAB 19574 (43154) 6 5 D 4 E 3 2 1 0 Metres Dipper length J S 2 6 0 TAB C F 10 9 8 7 6 5 4 3 2 1 0 Metres TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 4.5m (14ft 9in) kg 10820* 13130* 10820* 13130* 6m (19ft 8in) kg kg 8310* 10250* 11680* 12080* 11580* 10290* 7400* 8310* 10250* 9730 9510 9510 9650 7400* kg 6310* 6870* 7720* 8490* 8890* 8740* 7720* kg 6310* 6870* 6890 6610 6430 6390 6490 7.5m (24ft 7in) kg kg 6230* 6540* 6890* 7040* 5140 5030 4890 4800 JS260 NLC MONO 9m (29ft 6in) kg Capacity at Max. Reach kg kg 6210* 6210* 6300* 6460* 6660* 6860* 6980* 6610* LIFT CAPACITIES – Dipper length: 2.43m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 9630* 14370* 11130* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) kg kg kg 9630* 14370* 11130* 9590* 11290* 11980* 11750* 10720* 8420* 9590* 9770 9470 9410 9500 8420* Notes: kg 5840* 6450* 7340* 8200* 8730* 8750* 8040* kg 5840* 6450* 6910 6590 6380 6300 6350 7.5m (24ft 7in) kg kg 5870* 6260* 6670* 6930* 6790* 5160 5020 4860 4750 4710 mm 6947 7655 8021 8093 7878 7351 6434 4906 JS260 NLC MONO 9m (29ft 6in) kg kg 5870 4980 4550 4410 4510 4930 5940 6610* Capacity at Max. Reach kg kg 5740* 5680* 5830* 6000* 6170* 6350* 6470* 6300* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 5230 4520 4160 4040 4120 4450 5210 6300* mm 7489 8149 8494 8561 8358 7864 7016 5652 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg 5580* 10690* kg 5580* 10690* 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg kg 13550* 13550* 7270* 9820* 15760* 13220* 7270* 9820* 15760* 13220* 8620* 10560* 11700* 11900* 11270* 9610* 8620* 9970 9520 9360 9380 9560 5810* 6770* 7760* 8480* 8740* 8390* 7010* 5810* 6770* 6660 6400 6260 6250 6400 kg 5110* 5370* 5840* 6360* 6750* 6850* 6360* kg 5110* 5230 5060 4870 4730 4650 4670 JS260 NLC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4350* 5020* 4180* 3820 3740 3680 kg 3450* 3400* 3470* 3660* 3990* 4570* 5640* 5960* LIFT CAPACITIES – Dipper length: 3.52m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) – 6.0m (– 19.8ft) 1.5m (4ft 11in) kg 5390* 9520* 14470* kg 5390* 9520* 14470* 3m (9ft 10in) kg 8210* 6340* 9560* 14330* 14290* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg 8210* 6340* 9560* 14330* 14290* 7870* 9930* 11330* 11800* 11440* 10140* 7150* 7870* 9930* 9510 9270 9240 9380 7150* 6320* 7370* 8200* 8610* 8460* 7490* 6320* 6680 6370 6190 6140 6240 Notes: kg 4100* 4690* 5000* 5510* 6080* 6550* 6770* 6530* kg 4100* 4690* 5000* 5060 4860 4690 4580 4570 kg 3450* 3400* 3470* 3620 3670 3920 4460 5680 mm 8224 8828 9147 9209 9022 8566 7796 6600 JS260 NLC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4060* 5060* 5330* 5520* 4080* 3890 3820 3710 3630 3600 kg 3220* 3050* 3000* 3060* 3210* 3480* 3930* 4750* 5680* 5380* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 3220* 3050* 3000* 3060* 3210* 3390 3590 4030 4970 5380* mm 7789 8693 9267 9570 9630 9451 9018 8290 7178 5444 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 4.5m (14ft 9in) kg 10820* 13130* 10820* 13130* 6m (19ft 8in) kg kg 8310* 10250* 11680* 12080* 11580* 10290* 7400* 8310* 10250 9680 9460 9460 9600 7400* kg 6310* 6870* 7720* 8490* 8890* 8740* 7720* kg 6310* 6870* 6860 6570 6400 6350 6450 7.5m (24ft 7in) kg kg 6230* 6540* 6790 6690 5120 5000 4870 4780 JS260 SC MONO 9m (29ft 6in) kg Capacity at Max. Reach kg kg 6210* 6210* 6260 6090 6260 6860* 6980* 6610* LIFT CAPACITIES – Dipper length: 2.43m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 9630* 14370* 11130* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) kg kg kg 9630* 14370* 11130* 9590* 11290* 11980* 11750* 10720* 8420* 9590* 9720 9420 9360 9450 8420* Notes: kg 5840* 6450* 7340* 8200* 8730* 8750* 8040* kg 5840* 6450* 6870 6560 6350 6260 6320 7.5m (24ft 7in) kg kg 5870* 6260* 6670* 6630 6600 5140 4990 4830 4720 4690 mm 6947 7655 8021 8093 7878 7351 6434 4906 JS260 SC MONO 9m (29ft 6in) kg kg 5840 4950 4530 4380 4490 4900 5910 6610* Capacity at Max. Reach kg kg 5740* 5680* 5730 5580 5720 6200 6470* 6300* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 5210 4500 4140 4010 4090 4420 5190 6300* mm 7489 8149 8494 8561 8358 7864 7016 5652 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg 5580* 10690* kg 5580* 10690* 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg kg 13550* 13550* 7270* 9820* 15760* 13220* 7270* 9820* 15760* 13220* 8620* 10560* 11700* 11900* 11270* 9610* 8620* 9920 9470 9310 9330 9510 5810* 6770* 7760* 8480* 8740* 8390* 7010* 5810* 6770* 6630 6360 6220 6210 6360 kg 5110* 5370* 5840* 6360* 6620 6530 6360* kg 5110* 5200 5030 4850 4700 4620 4650 JS260 SC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4350* 5020* 4180* 3800 3720 3660 kg 3450* 3400* 3470* 3660* 3990* 4570* 5640* 5960* LIFT CAPACITIES – Dipper length: 3.52m, 5.85m Monoboom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) – 6.0m (– 19.8ft) 1.5m (4ft 11in) kg 5390* 9520* 14470* kg 5390* 9520* 14470* 3m (9ft 10in) kg 8210* 6340* 9560* 14330* 14290* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg 8210* 6340* 9560* 14330* 14290* 7870* 9930* 11330* 11800* 11440* 10140* 7150* 7870* 9930* 9460 9220 9190 9330 7150* 6320* 7370* 8200* 8610* 8460* 7490* 6320* 6640 6340 6160 6110 6210 Notes: kg 4100* 4690* 5000* 5510* 6080* 6550* 6470 6450 kg 4100* 4690* 5000* 5040 4830 4660 4550 4540 kg 3450* 3400* 3470* 3600 3650 3890 4440 5640 mm 8224 8828 9147 9209 9022 8566 7796 6600 JS260 SC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4060* 5060* 5160 5070 4080* 3870 3790 3690 3610 3580 kg 3220* 3050* 3000* 3060* 3210* 3480* 3930* 4750* 5680* 5380* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 3220* 3050* 3000* 3060* 3210* 3370 3570 4010 4940 5380* mm 7789 8693 9267 9570 9630 9451 9018 8290 7178 5444 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 5.85m Monoboom, Trackshoes: 700mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 4.5m (14ft 9in) kg 10820* 13130* 10820* 13130* 6m (19ft 8in) kg kg 8310* 10250* 11680* 12080* 11580* 10290* 7400* 8310* 10250* 10860 10630 10630 10290* 7400* kg 6310* 6870* 7720* 8490* 8890* 8740* 7720* kg 6310* 6870* 7590 7300 7120 7070 7180 7.5m (24ft 7in) kg kg 6230* 6540* 6890* 7040* 5640 5520 5390 5300 JS260 LC MONO 9m (29ft 6in) kg Capacity at Max. Reach kg kg 6210* 6210* 6300* 6460* 6660* 6860* 6980* 6610* LIFT CAPACITIES – Dipper length: 2.43m, 5.85m Monoboom, Trackshoes: 700mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg 9630* 14370* 11130* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) kg kg kg 9630* 14370* 11130* 9590* 11290* 11980* 11750* 10720* 8420* 9590* 10900 10580 10520 10620 8420* Notes: kg 5840* 6450* 7340* 8200* 8730* 8750* 8040* kg 5840* 6450* 7340* 7290 7070 6990 7040 7.5m (24ft 7in) kg kg 5870* 6260* 6670* 6930* 6790* 5660 5510 5350 5240 5210 mm 6947 7655 8021 8093 7878 7351 6434 4906 JS260 LC MONO 9m (29ft 6in) kg kg 6210* 5460 5000 4850 4970 5440 6560 6610* Capacity at Max. Reach kg kg 5740* 5680* 5830* 6000* 6170* 6350* 6470* 6300* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 5740 4960 4580 4450 4540 4910 5760 6300* mm 7489 8149 8494 8561 8358 7864 7016 5652 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 5.85m Monoboom, Trackshoes: 700mm, No bucket. Reach Load Point Ht. 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg 5580* 10690* kg 5580* 10690* 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg kg 13550* 13550* 7270* 9820* 15760* 13220* 7270* 9820* 15760* 13220* 8620* 10560* 11700* 11900* 11270* 9610* 8620* 10560* 10640 10470 10500 9610* 5810* 6770* 7760* 8480* 8740* 8390* 7010* 5810* 6770* 7360 7090 6940 6940 7010* kg 5110* 5370* 5840* 6360* 6750* 6850* 6360* kg 5110* 5370* 5560 5370 5220 5140 5170 JS260 LC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4350* 5020* 4180* 4210 4130 4070 kg 3450* 3400* 3470* 3660* 3990* 4570* 5640* 5960* LIFT CAPACITIES – Dipper length: 3.52m, 5.85m Monoboom, Trackshoes: 700mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) – 6.0m (– 19.8ft) 1.5m (4ft 11in) kg 5390* 9520* 14470* kg 5390* 9520* 14470* 3m (9ft 10in) kg 8210* 6340* 9560* 14330* 14290* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) kg kg kg kg kg 8210* 6340* 9560* 14330* 14290* 7870* 9930* 11330* 11800* 11440* 10140* 7150* 7870* 9930* 10640 10390 10350 10140* 7150* 6320* 7370* 8200* 8610* 8460* 7490* 6320* 7370* 7060 6880 6830 6930 Notes: kg 4100* 4690* 5000* 5510* 6080* 6550* 6770* 6530* kg 4100* 4690* 5000* 5510* 5360 5180 5070 5060 kg 3450* 3400* 3470* 3660* 3990* 4330 4930 5960* mm 8224 8828 9147 9209 9022 8566 7796 6600 JS260 LC MONO 9m (29ft 6in) Capacity at Max. Reach kg kg 4060* 5060* 5330* 5520* 4080* 4060* 4200 4100 4010 3980 kg 3220* 3050* 3000* 3060* 3210* 3480* 3930* 4750* 5680* 5380* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 3220* 3050* 3000* 3060* 3210* 3480* 3930* 4460 5490 5380* mm 7789 8693 9267 9570 9630 9451 9018 8290 7178 5444 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 13350* 13350* 6m (19ft 8in) kg 9060* 9570* 10680* kg 9060* 9570* 10490 8080* 8080* 7.5m (24ft 7in) kg kg 7750* 8110* 8490* 8510* 7970* 6770* 4540* 7180 6880 6500 6190 6040 6030 4540* kg kg 6700* 6750* 6640* 6130* 4880 4740 4590 4500 JS260 NLC T.A.B. 9m (29ft 6in) kg Capacity at Max. Reach kg kg 7880* 7010* 6530* 6210* 5900* 5520* 4920* 4150* LIFT CAPACITIES – Dipper length: 2.43m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 6m (19ft 8in) kg 9010* 8570* 9090* 10220* kg 9010* 8570* 9090* 10220* 10410* 8790* 6430* 8900 8790* 6430* Notes: 7.5m (24ft 7in) kg kg kg kg 7360* 7430* 7850* 8300* 8460* 8090* 7090* 5230* 7340 7250 6930 6520 6180 5980 5930 5230* 6470* 6520* 6640* 6620* 6260* 5300* 4990 4910 4730 4550 4440 4430 mm 5852 7016 7718 8081 8152 7939 7416 6293 JS260 NLC T.A.B. 9m (29ft 6in) kg kg 7500 5530 4650 4230 4080 4190 4600 4150* Capacity at Max. Reach kg kg 8750* 7150* 6460* 6060* 5770* 5500* 5160* 4650* 3720* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 8750* 6420 4940 4230 3870 3750 3820 4150 3720* mm 4709 6468 7536 8192 8535 8602 8401 7909 7066 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 14020* 14020* 8360* 8360* 6m (19ft 8in) kg kg 7310* 9530* 10840* 11470* 11020* 9730* 7700* 7310* 9530* 10060 9270 8900 8820 7700* kg 6790* 6970* 7460* 8020* 8370* 8250* 7550* 6110* kg 6790* 6970* 7080 6650 6250 5980 5870 5910 7.5m (24ft 7in) JS260 NLC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg kg kg 6100* 6250* 6470* 6580* 6410* 5790* 4320* 5130 4990 4780 4570 4420 4350 4320* 5390* 5270* 4850* 3580 3490 3430 kg 4340* 4080* 4000* 4060 4260* 4620* 4390* 3720* LIFT CAPACITIES – Dipper length: 3.52m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg kg 8680* 8680* 8060* 10150* 8060* 10150* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 8260* 10380* 11270* 11150* 10140* 8350* 6m (19ft 8in) kg 8260* 10250 9360 8860 8700 8350* Notes: kg 5510* 6150* 6480* 7130* 7750* 8200* 8230* 7710* 6510* 4310* kg 5510* 6150* 6480* 7130* 6710 6270 5950 5790 5790 4310* 7.5m (24ft 7in) kg kg 4930* 5820* 6020* 6290* 6470* 6400* 5940* 4840* 4930* 5180 5020 4790 4560 4370 4270 4290 kg 4340* 4080* 3750 3460 3350 3410 3650 3720* mm 7303 8261 8863 9181 9243 9056 8603 7836 JS260 NLC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg 4910* 5290* 5270* 5020* 4270* 3670 3580 3460 3370 3350 kg 4240* 3750* 3540* 3480* 3520* 3680* 3970* 4180* 3640* 3690* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 4240* 3750* 3540* 3450 3190 3090 3130 3330 3640* 3690* mm 6466 7832 8732 9303 9606 9665 9487 9055 8331 6561 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 13350* 13350* 6m (19ft 8in) kg 9060* 9570* 10680* kg 9060* 9570* 10440 8080* 8080* 7.5m (24ft 7in) kg kg 7750* 8110* 8490* 8510* 7970* 6770* 4540* 7140 6850 6470 6160 6000 6000 4540* kg kg 6700* 6690 6530 6130* 4860 4710 4560 4480 JS260 SC T.A.B. 9m (29ft 6in) kg Capacity at Max. Reach kg kg 7880* 7010* 6530 5970 5790 5520* 4920* 4150* LIFT CAPACITIES – Dipper length: 2.43m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 6m (19ft 8in) kg 9010* 8570* 9090* 10220* kg 9010* 8570* 9090* 10220* 10410* 8790* 6430* 8850 8790* 6430* Notes: 7.5m (24ft 7in) kg kg kg kg 7360* 7430* 7850* 8300* 8460* 8090* 7090* 5230* 7310 7210 6890 6490 6140 5940 5900 5230* 6470* 6520* 6640* 6500 6260* 5300* 4960 4880 4700 4530 4410 4400 mm 5852 7016 7718 8081 8152 7939 7416 6293 JS260 SC T.A.B. 9m (29ft 6in) kg kg 7460 5500 4620 4200 4060 4160 4580 4150* Capacity at Max. Reach kg kg 8750* 7150* 6460* 5940 5470 5320 5160* 4650* 3720* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 8750* 6390 4920 4210 3850 3720 3800 4130 3720* mm 4709 6468 7536 8192 8535 8602 8401 7909 7066 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 14020* 14020* 8360* 8360* 6m (19ft 8in) kg kg 7310* 9530* 10840* 11470* 11020* 9730* 7700* 7310* 9530* 10000 9220 8850 8770 7700* kg 6790* 6970* 7460* 8020* 8370* 8250* 7550* 6110* kg 6790* 6970* 7040 6610 6220 5950 5840 5870 7.5m (24ft 7in) JS260 SC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg kg kg 6100* 6250* 6470* 6520 6350 5790* 4320* 5100 4960 4750 4550 4390 4320 4320* 5070 4970 4850* 3560 3470 3410 kg 4340* 4080* 4000* 4060* 4260* 4620* 4390* 3720* LIFT CAPACITIES – Dipper length: 3.52m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg kg 8680* 8680* 8060* 10150* 8060* 10150* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 8260* 10380* 11270* 11150* 10140* 8350* 6m (19ft 8in) kg 8260* 10200 9310 8810 8650 8350* Notes: kg 5510* 6150* 6480* 7130* 7750* 8200* 8230* 7710* 6510* 4310* kg 5510* 6150* 6480* 7130 6670 6230 5920 5760 5750 4310* 7.5m (24ft 7in) kg kg 4930* 5820* 6020 6290* 6470* 6310 5940* 4840* 4930* 5160 5000 4770 4530 4530 4250 4260 kg 4340* 4080* 3730 3440 3330 3380 3630 3720* mm 7303 8261 8863 9181 9243 9056 8603 7836 JS260 SC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg 4910* 5070 4950 4850 4270* 3650 3560 3440 3350 3330 kg 4240* 3750* 3540* 3480* 3520* 3680* 3970* 4180* 3640* 3690* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 4240* 3750* 3540* 3430 3170 3070 3110 3310 3640* 3690* mm 6466 7832 8732 9303 9606 9665 9487 9055 8331 6561 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 2.01m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 13350* 13350* 6m (19ft 8in) kg 9060* 9570* 10680* kg 9060* 9570* 10680* 8080* 8080* 7.5m (24ft 7in) kg kg 7750* 8110* 8490* 8510* 7970* 6770* 4540* 7750* 7600 7210 6900 6740 6730 4540* kg kg 6700* 6750* 6640* 6130* 5390 5240 5090 5010 JS260 LC T.A.B. 9m (29ft 6in) kg Capacity at Max. Reach kg kg 7880* 7010* 6530* 6210* 5900* 5520* 4920* 4150* LIFT CAPACITIES – Dipper length: 2.43m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 6m (19ft 8in) kg 9010* 8570* 9090* 10220* kg 9010* 8570* 9090* 10220* 10410* 8790* 6430* 10030 8790* 6430* Notes: 7.5m (24ft 7in) kg kg kg kg 7360* 7430* 7850* 8300* 8460* 8090* 7090* 5230* 7360* 7430* 7650 7230 6880 6680 6630 5230* 6470* 6520* 6640* 6620* 6260* 5300* 5500 5420 5240 5060 4940 4930 mm 5852 7016 7718 8081 8152 7939 7416 6293 JS260 LC T.A.B. 9m (29ft 6in) kg kg 7880* 6090 5140 4680 4530 4650 4920* 4150* Capacity at Max. Reach kg kg 8750* 7150* 6460* 6060* 5770* 5500* 5160* 4650* 3720* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 8750* 7060 5450 4680 4290 4160 4250 4620 3720* mm 4709 6468 7536 8192 8535 8602 8401 7909 7066 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD LIFT CAPACITIES – Dipper length: 3.09m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) 4.5m (14ft 9in) kg kg 14020* 14020* 8360* 8360* 6m (19ft 8in) kg kg 7310* 9530* 10840* 11470* 11020* 9730* 7700* 7310* 9530* 10840* 10410 10030 9730* 7700* kg 6790* 6970* 7460* 8020* 8370* 8250* 7550* 6110* kg 6790* 6970* 7460* 7360 6960 6690 6570 6110* 7.5m (24ft 7in) JS260 LC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg kg kg 6100* 6250* 6470* 6580* 6410* 5790* 4320* 5640 5500 5290 5080 4920 4850 4320* 5390* 5270* 4850* 3980 3890 3830 kg 4340* 4080* 4000* 4060* 4260* 4620* 4390* 3720* LIFT CAPACITIES – Dipper length: 3.52m, 6.24m T.A. Boom, Trackshoes: 600mm, No bucket. Reach Load Point Ht. 9.0m (29.6ft) 7.5m (24.7ft) 6.0m (19.8ft) 4.5m (14.9ft) 3.0m (9.10ft) 1.5m (4.11ft) 0m – 1.5m (– 4.11ft) – 3.0m (– 9.10ft) – 4.5m (– 14.9ft) 1.5m (4ft 11in) kg kg 3m (9ft 10in) kg kg 8680* 8680* 8060* 10150* 8060* 10150* Lift capacity front and rear. Lift capacity full circle. 4.5m (14ft 9in) kg 8260* 10380* 11270* 11150* 10140* 8350* 6m (19ft 8in) kg 8260* 10380* 10500 10000 9830 8350* Notes: kg 5510* 6150* 6480* 7130* 7750* 8200* 8230* 7710* 6510* 4310* kg 5510* 6150* 6480* 7130* 7430 6970 6650 6490 6480 4310* 7.5m (24ft 7in) kg kg 4930* 5820* 6020* 6290* 6470* 6400* 5940* 4840* 4930* 5700 5540 5300 5060 4880 4780 4790 kg 4340* 4080* 4000* 3840 3730 3790 4060 3720* mm 7303 8261 8863 9181 9243 9056 8603 7836 JS260 LC T.A.B. 9m (29ft 6in) Capacity at Max. Reach kg kg 4910* 5290* 5270* 5020* 4270* 4070 3970 3860 3770 3740 kg 4240* 3750* 3540* 3480* 3520* 3680* 3970* 4180* 3640* 3690* 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer. kg 4240* 3750* 3540* 3480* 3520* 3450 3500 3720 3640* 3690* mm 6466 7832 8732 9303 9606 9665 9487 9055 8331 6561 TRACKED EXCAVATOR | JS260 NLC/SC/LC/XD A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in Europe. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of over 400 distributors and agents, the company exports over 70% of its production to all five continents. Through setting the standards by which others are judged, JCB has become one of Britain’s most impressive success stories. JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5308 06/10 Issue 2