Tractor: Loader

Transcript

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Seq. #726-612 TRACTOR: LOADER-BACKHOE Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, MN 55337 612.202.6906 800.950.3298 952.890.7046 [email protected] Spec # Information Requested 1.0 Make & Model ` June, 2012 Answer John Deere 310K Engine HP gross/net (SAE) Net 88 hp Aspiration Turbo-charged Transmission, type and number of forward and reverse gears 4 speed, helical-cut gears, full PowerShiftTM transmission with hydraulic reverser standard; electric clutch cutoff on loader lever. 4 forward, & 2 reverse gears Hydraulic pump (GPM and PSI) 56 gpm @ 6,825 psi GPM for backhoe 28 gpm GPM for loader 28 gpm Brakes Service: Power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking: Spring applied, hydraulically released, wet, multi-disc, independent of service brakes with electric switch control Steering Hydrostatic power steering and emergency steering Drive Axles Mechanicla Front Wheel Drive & Rear Axle Electric, foot actuated, 100% hydraulic locking Front tires, size and type 12-16.5 NHS (8) Rear tires, size and type 19.5L-24 R-4 (10) Backhoe digging depth (SAE) (Standard stick) 14 ft. 3 in. Backhoe digging depth 2' flat bottom (SS) 14 ft. 2 in. Backhoe reach from swing pivot at ground line (SS) 17 ft. 10 in. Backhoe loading height (SS) 10 ft. 11 in. STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Seq. #726-612 June, 2012 Backhoe loading reach (SS) NA Backhoe digging depth (SAE) (Retracted extendable stick) 14 ft. 5 in. Backhoe digging depth (SAE) (Extended extendable stick) 17 ft. 11 in. Backhoe digging depth 2' flat bottom (RES) 14 ft. 4 in. Backhoe digging depth 2' flat bottom (EES) 17 ft. 10 in. Backhoe reach from swing pivot at ground line (RES) 18 ft. 1 in. Backhoe reach from swing pivot at ground line (EES) 21 ft. 5 in. Backhoe loading height (RES) 11 ft. 1 in. Backhoe loading height (EES) 13 ft. 11 in. Backhoe loading reach (RES) NA Backhoe loading reach (EES) NA Loader capacity (SAE) standard bucket 1.25 cu. yd. / 5,028 lb. Loader standard bucket width 86 in. Loader maximum operating height 11 ft. 1 in. Loader lift capacity at maximum height 5,028 lb. Loader breakout force 8,175 lb. Loader maximum hinge pin height 11 ft. 1 in. Loader dump reach at maximum height 32.2 in. Loader maximum bucket roll back at ground level 40 deg. Loader digging depth, with bucket flat 7.8 in. Lights, front/rear 10 halogen: 4 front, 4 rear, and 2 side docking (32,500 candlepower each); turn signals and flashers: 2 front and 2 rear; stop and taillights; and 2 rear reflectors Gauges Digital display of engine hours, engine rpm, and system voltage. Monitor system with audible and visual warnings: Engine air restriction / Low alternator voltage /Engine oil pressure / Hydraulic filter restriction /Parking brake on/off / Aftertreatment temperature/ Transmission oil temperature / Fuel / Hour meter / Machine diagnostic information via 4push-button/LCD operator interface Warranty Term (months, years) 1 year full machine unlimited hours BASE UNIT PRICE: $ 65,410.41 STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Seq. #726-612 Price quote for: June, 2012 TRACTOR: LOADER-BACKHOE VENDOR NAME:__RDO Equipment Company____________________________________ John Deere 310K MAKE AND MODEL Spec # Description Qty BASE UNIT PRICE: 1.0 2.0 OPERATOR ENVIRONMENT Price $ 65,410.41 $ (5,145.24) 2.01 Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2025 Canopy with Floor mat & Headliner 2.02 2075 Cab with Dual Doors 2.03 2080 Cab with Dual Doors & Air Conditioning $ 673.12 2.04 2085 Ultimate Cab w/Dual Doors and Air Conditioning 2020 Quarter Cab Isolation mounted Modular design ROPS/FOPS Level 2 (meets ISO 3449 & ISO 3471 / SAE J1040) 9110 Ride Control Not for use with loader hydraulic codes 7035 (6.05) and 7085 (6.06) $ 1,067.77 $ (4,543.87) $ 1,053.54 2.07 9210 Left Side Console Storage w/Cup Holders $ 40.43 2.08 9060 Front View Mirror $ 42.71 2.09 9920 Two Exterior Rear View Mirrors $ 174.26 2.10 9095 Anti-Theft System $ 228.93 3.0 ELECTRICAL 2.05 2.06 Included Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need. 3.01 8675 Dual Batteries 1900 CCA 3.02 8625 Single Battery, 150 Minute Reserve Capacity (950 CCA) $ (152.05) 3.03 9131 Single Battery Disconnect 9132 Dual Battery Disconnect (Using Disconnect will Remove Radio Settings) AT313583 John Deere Two Bulb Amber Strobe and Switch (magnet mounted) $ 79.73 $ 91.12 $ 556.67 3.06 AT313592 John Deere Amber Rotating Beacon $ 697.89 3.07 AT313589 Beacon Wiring and Switch Kit $ 305.77 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. 4.01 4.02 3035 Two Wheel Drive w/Power shift Transmission 3085 Mechanical Front Wheel Drive w/Open Differential and PS Transmission 4.03 9100 Cold Weather Package (Engine coolant heater and ether start) 4.04 9505 Full MFWD Guard $ 218.11 4.05 9515 Diagnostic Oil Sampling Ports 1095 John Deere PowerTech E 4.5L (276 Cu.In.) Engine Meets IT4 and Stage IIIB Emissions (88 Net Peak hp) $ 108.77 3.04 3.05 4.06 5.0 5.01 5.02 5.03 5.04 In Base $ In Base In Base In Base AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need. 4770 Goodyear 19.5L-24 In 10 PR (R4) Tubeless Rear & 12-16.5 In 8 PR Traction Front Sure Grip Lug Tires (82" overall width. Rear tire chains require wheel spacers) 4771 Firestone 19.5L- 24 In. 10 PR (R4) Tubeless Rear & 305/70D16.5 NHS 10 PR Traction Front Sure Grip Lug Tires Requires Axle Code 3085 (4.02). 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers. AT388473 MFWD Wheel Fender Kit for 16.5 in. tires only AT371257 MFWD Wheel Fender Kit for 18 in. tires only FOR USE WITH 2 WHEEL DRIVE 4260 Goodyear 19.5L - 24 In. 10 PR (R4) Tubeless Rear &11L - 16 In. 12 5.05 PR (F3) Front Tires REquires Axle Code 3035 (4.01) 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers. 4768 Firestone 19.5L - 24 In. 10 PR (R4) Tubeless Rear & 11L - 16 In. 12 5.06 PR (F3) Front Tires Requires Front Axle code 3035 (4.01). 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers. (5,918.59) In Base no charge $ 1,058.90 $ 1,058.90 0 $ (66.06) $ (68.34) Subtotal $ - Seq. #726-612 STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) June, 2012 5.07 4892 Goodyear16.9L - 28 In. 10 PR (R4) Tubeless Rear & Firestone 11L 16 In. 12 PR (F3) Front Tires Requires Front Axle code 3035 (4.01). 87 in. (2.22 m) overall width. Rear tire chains require wheel spacers. 6.0 6.01 $ HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. 5225 Deere Two Lever Controls (Standard Backhoe or Extendible Dipperstick, Includes All Controls) 175.97 In Base 6.02 5285 Deere Backhoe Pattern 2-Lever Pilot Controls with Pattern Selection Loader Hydraulics 6.03 7025 Two Function Valve and Lines with Single Control Lever $ 1,397.50 In Base 6.04 6.05 7075 Three Function Valve and Lines with Dual Lever Controls (for MultiPurpose Buckets and Front Attachments, Includes .50 Inch Hoses and Steel Lines to Loader Cross Tube, Includes Valve with Circuit Relief) 7035 Loader and Coupler w/ 2 Function Hydraulics - 1 Lever Not for use with Code 9110 (2.06), Ride Control. $ 932.81 $ 3,599.11 $ - 7085 Loader and Coupler w/ 3 Function Hydraulics - 2 Lever Cannot be used with Code 9110 (2.06) Ride Control Includes Ride Control For multipurpose coupler bucket and front attachments. Includes valve with circuit relief and .5 in. (12.7 mm) hoses and steel lines to loader cross tube. Will accept 310G, SG, SJ, SK & 410G, J, K loader coupler buckets $ 4,527.93 $ - 6.06 7.0 7.01 7.02 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. 5020 Standard Dipperstick 5030 Standard Dipperstick and Auxiliary Hydraulics Five-function hydraulics Selective flow control valve (9,13,16,18,22 or 25GPM) for one-way flow 1000-3000 PSI adjustable Flow control auxiliary plumbing with foot switch Standard stablizers with cam-lock reversible pads 5040 Standard Dipperstick and Auxiliary Hydraulics with Thumb Mounting 7.03 Ears Six-function hydraulics Includes two-way valve with left foot pedal Selective flow control valve (9,13,16,18,22 or 25GPM) for one-way flow 1000-3000 PSI adjustable Flow control auxiliary plumbing with foot switch Standard stabilizers with cam-lock reversible pads Thumb cylinder ears compatible with Deere thumbs only 5070 Extendible Dipperstick Five-function hydraulics Standard stabilizers 7.04 with cam-lock reversible pads 5080 Extendible Dipperstick and Auxiliary Hydraulics Six-function 7.05 hydraulics Selective flow control valve (9,13,16,18,22 or 25GPM) for oneway flow 1000-3000 PSI adjustable Flow control auxiliary plumbing with foot switch Standard stablizers with cam-lock reversible pads 5400 Less Coupler 7.06 5410 DEERE Standard Quick Coupler For use with DEERE 310E, G, J, K 7.07 Series Backhoe Buckets. Not compatible with 310SE, SG, SJ, SK, 410E, G, J, K buckets 5420 Multi-Brand Quick Coupler For use with DEERE C, D, SE, SG, SJ, 7.08 SK Series buckets and with Case K-L-M and CAT C Series Buckets. Not for use with 710 Buckets. Spacers are recommended for CAT and Case buckets, contact DMAC. 5430 Top Hook Quick Coupler For use with DEERE Top Hook Coupler 7.09 bucket codes 5630 or 5660 and CP or Pre-XLS Wain Roy Top Hook Buckets 5500 Less Backhoe with bucket pins 7.10 5554 24" (610mm) Wide - Regular - 6.5 Cu. Ft. (0.18 Cu. M.) Capacity 7.11 5626 18" (457 mm) Wide - HD - 5.1 Cu. Ft. (0.14 Cu. M.) Capacity 7.12 5630 Top Hook 18" (457 mm) Wide - HD - 5.1 Cu. Ft. (0.14 Cu. M.) 7.13 Capacity Coupler Backhoe Bucket Requires Code 5430 (7.09) Top Hook Coupler 5656 24" (610 mm) Wide - HD - 7.5 Cu. Ft. (0.21 Cu. M.) Capacity 7.14 5660 Top Hook 24" (610 mm) Wide - HD - 8.8 Cu. Ft. (0.25 Cu. M.) 7.15 Capacity Coupler Backhoe Bucket Requires Code 5430 (7.09) Top Hook Coupler 9020 Hydraulic 4-Tine (Standard Dipperstick) Backhoe Thumb 7.16 Requires code 5040 (7.03) Hydraulics. Includes plumbing from valve to thumb. Requires backhoe bucket code 5554 (7.12), 5656 (7.14) Not for use with backhoe coupler Codes 5430 (7.09) 9190 Boom Protection Plate 7.17 AT358431 Hydraulic 4-Tine Thumb Kit Recommended for use with 24 in. 7.18 Backhoe Buckets. Requires Plumbing Kit. AT358430 Hydraulic 2-Tine Thumb Kit Recommended for use with 18 & 30 7.19 in. Backhoe Buckets. Requires plumbing kit. Magnum Breakers & Compactor RHB 305 Breaker - 750 Lb with Top Cap for JD 310K (Includes Moil or 7.20 Chisel Tool) In Base $ 1,503.42 $ 1,812.08 $ 4,455.60 $ 5,309.25 In Base $ 655.47 $ 742.60 $ $ $ 595.67 In Base 659.46 676.54 $ $ 676.54 698.18 $ 936.22 $ $ 3,520.52 291.57 $ 4,238.82 $ 4,238.82 0 $ 9,867.14 Seq. #726-612 7.21 7.22 STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) RHB 306 Breaker - 1200 Lb with Top Cap for JD 310K (Includes Moil or Chisel Tool) RHP 20 Magnum Compactor FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. Counterweight 8410 Front Cover 8.01 8415 Heavy Duty Bumper Recommended for: Standard Backhoe w/o Aux. 8.02 Hyd. Extendible Backhoe w/ Multipurpose Bucket 8425 450 Lb Front Counterweight 8.03 8455 750 Lb. (340 kg) Front Counterweight Recommended for: Extendible 8.04 Backhoe w/ 1.0 c.y. Loader Bucket and w/o Coupler Extendible Backhoe w/ 1.13, 1.2, or 1.25 c.y. Loader Bucket 8475 1000 Lb. (454 kg) Front Counterweight Recommended for: Standard 8.05 Backhoe w/ rear attachment and w/o Backheo Coupler Extendible Backhoe w/ 1.0 c.y. Loader Bucket w/o Backhoe Coupler 8485 1250 Lb. (567 kg) Front Counterweight Recommended for: Standard 8.06 Backhoe w/ rear attachment and w/o Backhoe Coupler Standard Backhoe w/ Aux. Hyd. and Backhoe Coupler Extendible Backhoe w/ 1.0 c.y. Loader Bucket and Backhoe Coupler Forks AT308139 Forks, Pallet (2) 60 in.(1.52m) with 60 in. (1.52m) Coupler Fork 8.07 Carriage AT308138 Forks, Pallet (2) 48 in.(1.22m) with 60 in. (1.52m) Coupler Fork 8.08 Carriage Pin-On Loader Buckets 7600 Less Loader Bucket with Pins for Buckets or Front Attachments 8.09 7615 1.0 Cu Yd Heavy Duty Bucket (Capacity is W/O Edge) (86" Wide, 8.1 Includes Reversible Bolt-On Cutting Edge, without Skid Plates) 7635 1.0 Cu Yd Heavy Duty Bucket (Capacity is W/O Edge) (86" Wide, 8.11 Includes Reversible Bolt-On Cutting Edge, with Skid Plates) 7640 1.25 Cu Yd Heavy Duty Long Lip Bucket 86" Wide (Punched for Bolt8.12 On Cutting Edge, with Skid Plates) 7675 1.25 Cu. Yd. (.96 Cu. M.), 86 in.(2.18 mm) wide Multipurpose Bucket 8.13 Requires Code 7075 (6.04), Aux. Loader Hydraulics. Includes reversible bolt-on cutting edge and skid plates. Pre-drilled for seven teeth. Order teeth from parts. Includes two lift holes. Couplers and Coupler Loader Buckets 7605 Less Coupler Bucket 8.14 7650 1.3 Cu. Yd. (1.0 Cu. M.) 92 in. (2.34 m) wide Heavy-Duty Long-Lip 8.15 Coupler Bucket without Cutting Edges or Skid Plates. AT308970 LDR Coupler Bucket 1.13 Cu. Yd. (.86 Cu. M.) Heavy Duty 86 8.16 in. (2.18 m) wide Long Lip with Reversible Bolt On Cutting Edge and Skid Plates 8.17 AT308968 LDR Coupler Bucket 1.25 Cu. Yd. (.96 Cu. M.) Heavy Duty 86 in. (2.18 m) wide Long Lip without Bolt-On Cutting Edges or Skid Plates 8.18 AT308991 LDR Coupler Bucket 1.13 Cu. Yd. (.86 Cu. M.) Heavy Duty 86 in. (2.18 m) wide with Reversible Bolt On Cutting Edge with Skid Plates 8.19 AT363771 LDR Coupler Multipurpose Bucket 1.25 cu. yd. (.96 cu. m) 86 in. (2.18 m) wide with Reversible Bolt On Cutting Edges and Skid Plates Requires Aux. Loader Coupler Hydraulics. 86 in. (2.18 m) bucket width. Includes reversible bolt-on cutting edge and skid plates. Pre-drilled for seven teeth. Order teeth from parts. Includes two built-in lift loops. AT363772 LDR Coupler Multi-Purpose Bucket 1.32 cu. yd. (1.0 cu. m) 92 8.2 in. (2.34 m) with Reversible Bolt On Cutting Edges and Skid Plates Predrilled for eight teeth. Includes two built-in lift loops. Proper counterweighting is required. See Counterweight Selection Chart. 7686 1.3 Cu. Yd. (1.0 Cu. M.) Bucket less Skid Plates 8.15 June, 2012 $ $ 14,659.03 6,870.81 8.0 9.0 In Base $ $ 117.31 325.74 $ 528.48 $ 727.79 $ 1,131.55 $ 3,189.54 $ 3,067.14 In Base $ 1,323.47 $ 1,558.16 $ 1,601.37 $ 3,678.26 No Charge $ 1,787.02 $ 2,604.57 $ 2,621.34 $ 2,686.91 $ 5,627.15 $ $ 5,840.65 2,296.14 PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. 9.1 9.2 10.0 HOURLY SHOP LABOR RATE: (Installation services may be requested on an as needed basis) 11.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ $ $ - $ 108.00 14.49 STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Seq. #726-612 12.0 June, 2012 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 10.1, 10.2, etc. (Specify years, miles or hours extended term covers.) 12.01 Price: $ - Price: $ - Price: $ - Price: $ - 12.02 12.03 12.04 STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Seq. #726-612 13.0 June, 2012 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: ________________ 14.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price. 15.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number 16.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS 14.01 14.02 14.03 14.04 14.05 14.06 14.07 14.08 14.09 N/A 850.00 2,550.00 90% DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE: MINIMUM DELIVERY CHARGE: $ $ N/A - NO FLAT RATE ALLOWED Burnsville, MN 55337 Grand Forks, ND 58203 Marshall, MN 56258 Moorhead, MN 56560 North Mankato, MN 56003 Rochester, MN 55901 Sauk Rapids, MN 56379 $ 4.75 $ 350.00 -