Transcript
505TT-US-W
Buttons DAY HOURS MIN. CLOCK PROG. MANUAL RESET
WEEKLY TIMER, 15A/1875W 505TT-US-W
: Sets weekday : Sets hours : Sets minutes : Enables clock/weekday setting : Enables Timer Programming : Manual ON/OFF of Control Socket : Resets product to factory default
Plug the product into a wall outlet and plug an appliance to be controlled into the Control Socket.
INSTRUCTIONS (ENGLISH)
Introduction TM
Thank you for purchasing this TrickleStar product. This product provides enhanced controls to reduce wasteful energy consumption of appliances, which do not include timing controls. This product is suitable for a wide range of appliances including: heaters, stand-alone air conditioning units, fans, water pumps, hot water urns, water coolers, photocopiers, pool pumps, signage etc.
MO TU WE TH FR SA SU
LCD Display Hour Button Minute Button
COUNT DOWN AUTO MANUAL
Day Button
HOURS
DAY
CLOCK
COUNT DOWN
MIN
PROG.
Reset
MO TU WE TH FR SA SU
RESET
Control Socket #1
COUNT DOWN AUTO MANUAL
Control Socket #2
DAY
MIN
HOURS
CLOCK
COUNT DOWN
PROG.
RESET
MANUAL
MANUAL
Manual Button Clock Program Button Button
NOTE: The product contains a battery, which stores the settings and drives the Display. If the display is off when you plug in the product to a wall receptacle, then allow the product to charge for a short time and the text will gradually appear.
Features
Set Time
The Product has the following key features: • Up to 8 ON and OFF programs a day / 56 ON and OFF programs per week. • Option to program individual days or 8 different weekday groups • Minimum switching period one minute • Manual override button • Random ON/OFF security feature • Countdown feature • 12 hour AM/PM display. • Summer/Winter time changeover • Rechargeable backup battery
The product has a Summertime/Wintertime changeover function. The product is per default (and after reset) in Wintertime. If you purchase this unit during the summertime press the ‘HOURS’ and ‘MIN’ buttons simultaneously to switch to summertime and “S” will appear on the Display.
Getting Started The product has an easy to use LCD display:
To set the weekday and clock: 1. Press-and-hold the ‘CLOCK’ button 2. Press the ‘DAY’ button to set the weekday 3. Press the ‘HOUR’ button to set the hours 4. Press the ‘MIN’ button to set the minutes 5. Release the ‘CLOCK’ button If the ‘DAY’, ‘HOURS” or ‘MIN‘ button is pressed for more than 1 second the value will increase continuously while button is pressed.
www.tricklestar.com © TrickleStar
505TT-US-W
Program Timer
Random On/Off
Up to 8 ON/OFF switches can be configured. You can choose to make the ON/OFF switching identical for all weekdays, individual weekdays or groups of days as listed in the following table
The Random On/Off feature can be used for security purposes by switching ON and OFF light to make the home look occupied when away. When enabled the Control Socket is switch ON and OFF in a random pattern at least once in every 8 hours.
MON
TUE
WED
THR
FRI
SAT
SUN
Total no. of ON/OFF Switches
1
56
2
8
3
8
4
8
5
8
6
8
7
8
8
8
9
40
10
16
11
42
12
24
13
24
14
24
15
24
For each ON time and each OFF time the Day, Hours and Minutes must be set. To enter Timer Mode and program the Timer: 1. Press the ‘PROG’ button to set the first ON program time. “ON” and the Number “1” appears in the lower left section of the display. 2. Press the ‘DAY’ button to choose the required day or block of days as indicated in Table 1. 3. Press the ‘HOUR’ button to set the hours 4. Press the ‘MIN’ button to set the minutes
To switch between Random On/Off mode and normal Timer Mode press the ‘DAY’ and ‘HOURS’ buttons simultaneously to enter Random On/Off mode. An “R” will appear on the display when in Random On/Off mode.
PM ON
7 46 29 R
Manual Override You can choose permanent Manual ON, permanent Manual OFF, Auto ON and Auto OFF by pressing the Manual button. Each mode will be displayed on the screen. When you choose Auto ON the Control Socket will stay ON until a Timer OFF event occurs. When you choose Auto OFF the Control Socket will stay OFF until a Timer ON event occurs.
Countdown The Countdown feature enables the Control Socket to be switched OFF after a defined period of time. To program the countdown: 1. Press ‘CLOCK’ and ‘PROG” button simultaneously. 2. Press the ‘HOURS’ and the ‘MIN’ buttons to set the countdown time. The maximum countdown period is 9 hours and 59 minutes. The minimum countdown period 1 minute. 3. Press the ‘MANUAL’ button to turn ON the Control Socket and start the countdown. Control Socket turns OFF when countdown timer expires. 5. 6. 7. 8.
Press ‘PROG’ button to set the first OFF program time. “OFF” and the number “1” appears in the display. Press the ‘DAY’ button to choose day to switch OFF. If you have chosen a group of days for ON you should choose the same group of days for OFF. Press the ‘HOUR’ button to set the hours Press the ‘MINUTES’ button to set the minutes
Countdown can be pause at anytime by pressing the ‘MANUAL’ button and re-start by press the ‘MANUAL’ button again. To review Clock press and hold the ‘CLOCK’ button, release the button to return to the countdown display. To return to the Timer Mode, press the ‘CLOCK’ and ‘PROG’ buttons simultaneously.
Summertime/Wintertime Switchover To switch between Wintertime and Summertime press the ‘HOURS’ and ‘MIN’ buttons simultaneously. When in Summertime a “S” will appear on the display.
PM ON
9. Repeat 1-8 if more ON/OFF times is to be set. 10. When you have set the required On Off settings, press the ‘CLOCK’ button to return the display to the clock. The timer is now ready to operate. You can check the settings you have programmed by pressing the ‘PROG’ button repeatedly – each setting will appear on the screen.
7 46 29 S
NOTE: The product is per factory default (and after reset) in wintertime. If you purchase this unit during the summertime, first switch to summertime before setting the date and clock. Switch to Summertime by pressing the ‘HOURS’ and ‘MIN’ buttons simultaneously and “S” will appear on the Display. www.tricklestar.com © TrickleStar
505TT-US-W
Restore Factory Defaults Press the Reset Button to clear all timer settings. Time will be “AM 12:00”, “PROG OFF” and the Control Socket will be Off.
Battery The product contains a rechargeable battery to store settings if power is removed. If no text is displayed plug the product into a wall receptacle for 1 hour to recharge the battery. If the battery is fully discharged, the factory defaults will be restored.
Electrical and Environmental Specifications Voltage
125 VAC / 60Hz
Power Rating: Operating Temperature
15A / 1875W – Resistive Load 15A / 1875W – Tungsten Load -10° to 40°C
Storage Temperature
-10ºC to 70ºC
Operating Humidity
5 to 95% N/C
IMPORTANT SAFETY NOTICES • • •
Fans or other appliances with exposed elements should not be left unattended. FOR INDOOR USE ONLY SUITABLE FOR NON-CONDENSING ENVIRONMNENTS ONLY.
Approvals US ELECTRICAL & SAFETY
OTHER
ETL
2002/95/EG (RoHs) 2002/96/EC (WEEE) 1999/5/EC (RTTE)
Warranty www.tricklestar.com/warranty
Copyright & Disclaimer © TrickleStar Ltd. All rights reserved. TM TrickleStar is a registered trademark of TrickleStar Ltd. Disclaimer: TrickleStar reserves the right to change specifications or designs described in this manual without notice and without obligation. Any typographical, clerical or other error or omission in this document or other documents or information issued by TrickleStar shall be subject to correction without any liability on the part of TrickleStar without notice. Conserving Energy. Improving Life www.tricklestar.com
www.tricklestar.com © TrickleStar
