Transcript
Trio Q Data Radios
Licensed UHF | Ethernet and Serial Data QR450
1
The Trio Q Data Radios are advanced high speed licensed digital data radios, which provide both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems. Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Trio Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment. Combining both Ethernet and serial connectivity, the Trio Q Data Radios are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.
2
Product Data Sheet Trio QR450 Specifications
Trio QR450 Radio Frequency Range
400-450MHz (M-Band) or 450-520MHz (H-Band)
Frequency Splits
Various Tx/Rx frequency splits - configurable
Channel Selection
3.125kHz channel steps
Channel Spacing
12.5 and 25kHz (software selectable)
Frequency Accuracy
±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging
<= 1ppm/annum
Radio Modes
Simplex and Half duplex
Configuration
Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter Tx Power
0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation
Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time
<1ms
Timeout Timer
Configurable 0 to 255 seconds
Tx Spurious
<= -37dBm
PTT Control
Auto (Data) / RTS line on Data Port
Receiver AFC Tracking
Digital receiver frequency tracking
Mute
Configurable digital mute
Connections Serial Com Port 1/2
1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds
From 600bps up to 115,200bps
Serial Com Port Flow Control
Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control
Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port
2 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna
1 x TNC female bulkhead
Power
2-pin locking, mating connector supplied
USB port
Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display
Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet Ethernet Protocols
Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating
Automatic and Self Learning Peer to Peer repeating
Operating Modes
Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering
Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression
Automatic Ethernet data compression
Terminal Server
Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes
Auto and Manual
SNMP
SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway
Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester
Internal ping test facility
Specifications continue on the next page
3
Product Data Sheet Trio QR450 Specifications Trio QR450 Modem RF Channel Data Rate #
Region
Bandwidth (KHz)
Speed (Kbps)
RF Sens (1x10E-6 BER)
FCC
12.5
8 16 24 32
-116 -111 -105 -97
25
16 32 48 64
-114 -109 -103 -96
12.5
8 16 24 32
-113 -110 -107 -100
25
14 28 42 56
-114 -109 -103 -96
ACMA/ETSI
Dynamic Speed Selection
QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes
Base, remote, repeater or store n’ forward
Channelshare+™
Advanced dynamic supervisory collision avoidance system
Backward Compatibility
Backward compatible with Trio E-Series radios
Firmware
Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security Encryption*
256-bit AES
HTML Interface
Password Protected HTTP and HTTPS configuration and management interface
Console Interface
Password protected Telnet, SSH and Serial console interface
Password Protection
Password protected configuration sessions
Diagnostics Diagnostics Overview
• • • • • •
Network management and diagnostic Windows GUI software Network-wide operation from any remote terminal Non intrusive protocol – runs simultaneously with the application Storage of data error and channel occupancy statistics In-built Error Rate testing capabilities Diagnostics parameters available • Transmitter Power • Received Signal Strength • DC Supply Voltage • Received Frequency Error • Radio Temperature • VSWR
Event Log
Internal Event Logging facility
General Operating Temperature Range
-40 to +70°C (-40 to 158°F) ambient
Power Supply
13.8Vdc nominal (10-30Vdc)
Transmit Current
1.6A nominal @ 1W, 2.7A nominal @ 5W, 3.7A nominal @ 10W
Receive Current
<330mA nominal @ 13.8Vdc
Housing & Dimensions
Rugged die-cast, 115 x 34 x 164mm
Mounting
Integrated Mounting Holes or DIN Rail mounting (optional)
Weight
0.5kg (1.1lbs.)
Warranty
3 years on parts and labor
Approvals and Certifications Europe (ETSI)
ETSI EN300113, EN301489, EN60950
FCC
FCC PART 15, PART 90
Industry Canada
IC RS119, ICES-001
Australia
ACMA AS4295-1995 (Data)
Hazardous Locations
CSA Class I, Division II, Groups (A,B,C,D) for Hazardous Locations ANSI/UL equivalent)
6
Product Data Sheet Trio QR450 Model Code
TBURQR4ab-cccdeef represents the part number matrix
Model
Trio Radio QR450
TBURQ
Q Data Radios
Code
Select: Unit Type
R
Code 4
Code
Simplex/Half Duplex Radio
Select: Generic Frequency Band UHF: 400 - 520 MHz Band
Select: Sub Band - UHF
L
Low Band : 400 to 450MHz
H
High Band : 450 to 520MHz
Code H
Code
Select: Hazardous Area Approvals CSA & ATEX Hazardous (Standard)
Select: Modulation
E00
ETSI/ACMA Region
F00
FCC Region
Code
Select: Encryption (subject to country of use)
E
256-bit AES encryption (standard)
N
No encryption
Code
Select: Licensed Feature
0L
Serial Data Only (Two Serial Ports)
1L
Ethernet & Serial (Three Ethernet & two Serial Ports)
Code 0
Select: Power Supply 10-30V DC Standard
Example: TBURQR4LH-E00E1L0 specifies: Trio QR450 remote station, 400 to 450MHz, hazardous area approved, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, two Ethernet & two Serial Ports, 10-30V DC power supply Communications Standards: FCC – Federal Communications Commission (USA) IC – Industry Canada ETSI – European Telecommunication Standards Institute ACMA – Australian Communications and Media Authority * Export restrictions may apply. Contact your local representative for more details. Note: Not all product features are available in every mode of operation. Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
Trio Q Data Radios
Licensed UHF | Ethernet and Serial Data QB450
1
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems. Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment. Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/ Ethernet.
2
Product Data Sheet Trio QB450 Specifications
Trio QB450 Radio Frequency Range
400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits
Various Tx/Rx frequency splits - configurable
Channel Selection
3.125kHz channel steps
Channel Spacing
12.5 and 25kHz (software selectable)
Frequency Accuracy
±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging
<= 1ppm/annum
Radio Modes
Simplex, Half duplex & Full duplex
Duplexer
Optional external duplexer available for single antenna operation
Configuration
Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter Tx Power
0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation
Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time
<1ms
Timeout Timer
Configurable 0 to 255 seconds
Tx Spurious
<= -37dBm
PTT Control
Auto (Data)
Receiver AFC Tracking
Digital receiver frequency tracking
Mute
Configurable digital mute
Connections Serial Com Port 1/2
1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds
From 600bps up to 115,200bps
Serial Com Port Flow Control
Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control
Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port
3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna
2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)
Power (Supply voltage options)
10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket
USB port
Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display
Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet Ethernet Protocols
Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating
Automatic and Self Learning Peer to Peer repeating
Operating Modes
Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering
Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression
Automatic Ethernet data compression
Terminal Server
Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes
Auto and Manual
SNMP
SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway
Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester
Internal ping test facility
Specifications continue on the next page
3
Product Data Sheet Trio QB450 Specifications
Trio QB450 Modem RF Channel Data Rate #
Region
Bandwidth (KHz)
Speed (Kbps)
RF Sens (1x10E-6 BER)
FCC
12.5
8 16 24 32
-116 -111 -105 -97
25
16 32 48 64
-114 -109 -103 -96
12.5
8 16 24 32
-113 -110 -107 -100
25
14 28 42 56
-114 -109 -103 -96
ACMA/ETSI
Dynamic Speed Selection
QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes
Base, remote, repeater or store n’ forward
Channelshare+™
Advanced dynamic supervisory collision avoidance system
Backward Compatibility
Backward compatible with Trio E-Series radios
Firmware
Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security Encryption*
256-bit AES
HTML Interface
Password Protected HTTP and HTTPS configuration and management interface
Console Interface
Password protected Telnet, SSH and Serial console interface
Password Protection
Password protected configuration sessions
Diagnostics Diagnostics Overview
• • • • • •
Network management and diagnostic Windows GUI software Network-wide operation from any remote terminal Non intrusive protocol – runs simultaneously with the application Storage of data error and channel occupancy statistics In-built Error Rate testing capabilities Diagnostics parameters available • Transmitter Power • Received Signal Strength • DC Supply Voltage • Received Frequency Error • Radio Temperature • VSWR
Event Log
Internal Event Logging facility
General Operating Temperature Range
-40 to +70°C (-40 to 158°F) ambient
Internal Fan
Internal automatic thermostatically controlled fan
Power Supply
10-30Vdc (nominal) or optional 36-72Vdc or 100-250Vac power supply
Protection mode
Full duplex (not protected) or optional half duplex (protected) hardware variants
Transmit Current**
4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W
Receive Current**
1A nominal @ 13.8Vdc
Housing & Dimensions
19” 1 RU rack mount, 483 x 45 x 410mm
Weight
5kg (11lbs.)
Warranty
3 years on parts and labor
Approvals and Certifications Europe (ETSI)
ETSI EN300113, EN301489, EN60950
FCC
FCC PART 15, PART 90
Industry Canada
IC RS119, ICES-001
Australia
ACMA AS4295-1995 (Data)
6
Product Data Sheet Trio QB450 Model Code
TBURQB4ab-cccdeef represents the part number matrix
Model
Trio Radio QB450
TBURQ
Q Data Radios
Code
Select: Unit Type
B
Full Duplex Radio - 19” 1RU
P
Half Duplex Protected Radio - 19” 1RU
Code 4
Code
Select: Generic Frequency Band UHF: 400 - 520 MHz Band
Select: Sub Band - UHF
L
Low Band : 400 to 450MHz
H
High Band : 450 to 520MHz
Code N
Code
Select: Hazardous Area Approvals No Approval
Select: Modulation
E00
ETSI/ACMA Region
F00
FCC Region
Code
Select: Encryption (subject to country of use)
E
256-bit AES encryption (standard)
N
No encryption
Code
Select: Licensed Feature
0L
Serial Data Only (Two Serial Ports)
1L
Ethernet & Serial (Three Ethernet & two Serial Ports)
Code
Select: Power Supply
0
Redundant 10 - 30V DC Standard
1
Redundant -48V DC
2
Non-Redundant 110/240V AC
3
Redundant 110/240V AC
Example: TBURQB4LN-E00E1L0 specifies: Trio QB450 base station, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, redundant 10-30V DC power supply. Communications Standards: FCC – Federal Communications Commission (USA) IC – Industry Canada ETSI – European Telecommunication Standards Institute ACMA – Australian Communications and Media Authority * Export restrictions may apply. Contact your local representative for more details. ** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps. Note: Not all product features are available in every mode of operation. Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
Trio Q Data Radios
Licensed UHF | Ethernet and Serial Data QH450
1
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems. Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment. Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/ Ethernet.
2
Product Data Sheet Trio QH450 Specifications
Trio QH450 Radio Frequency Range
400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits
Various Tx/Rx frequency splits - configurable
Channel Selection
3.125kHz channel steps
Channel Spacing
12.5 and 25kHz (software selectable)
Frequency Accuracy
±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging
<= 1ppm/annum
Radio Modes
Full duplex
Duplexer
Optional external duplexer available for single antenna operation
Configuration
Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter Tx Power
0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation
Configurable narrow band digitally filtered binary GMSK, 4, 8 and 16 level FSK
Tx Keyup Time
<1ms
Timeout Timer
Configurable 0 to 255 seconds
Tx Spurious
<= -37dBm
PTT Control
Auto (Data)
Receiver AFC Tracking
Digital receiver frequency tracking
Mute
Configurable digital mute
Connections (for each Base within the Hot Standby configuration) Serial Data Port
1 x RS232 DB9 female connector providing 2 x RS-232 3-wire serial ports (shared connector). 300-38,400 bps asynchronous
Serial Data Port Flow Control
Configurable hardware / software / 3-wire interface
Serial Data Port DCD Control
Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port
3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna
2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)
Power (Supply voltage options)
10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket
USB port
Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display
Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet Ethernet Protocols
Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating
Automatic and Self Learning Peer to Peer repeating
Operating Modes
Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering
Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Ethernet Link Monitoring
Monitor the Ethernet link between a base unit and up to two remote IP addresses
Compression
Automatic Ethernet data compression
Terminal Server
Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes
Auto and Manual
SNMP
SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway
Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester
Internal ping test facility
Specifications continue on the next page
3
Product Data Sheet Trio QH450 Specifications
Trio QH450 Modem RF Channel Data Rate #
Region
Bandwidth (KHz)
Speed (Kbps)
RF Sens (1x10E-6 BER)
FCC
12.5
8 16 24 32
-116 -111 -105 -97
25
16 32 48 64
-114 -109 -103 -96
12.5
8 16 24 32
-113 -110 -107 -100
25
14 28 42 56
-114 -109 -103 -96
ACMA/ETSI
Dynamic Speed Selection
QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes
Base, remote, repeater or store n’ forward
Channelshare+™
Advanced dynamic supervisory collision avoidance system
Backward Compatibility
Backward compatible with Trio E-Series radios
Firmware
Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security Encryption*
256-bit AES
HTML Interface
Password Protected HTTP and HTTPS configuration and management interface
Console Interface
Password protected Telnet, SSH and Serial console interface
Password Protection
Password protected configuration sessions
Hot Standby Controller Change-over control
Manual (forced) / automatic / remote (software driven)
Alarm Monitoring
Tx Power Failure / Receiver Failure / Received Signal Frequency Error / Data Corruption / DC Power Supply Fail
Diagnostics Diagnostics Overview
• • • • • •
Network management and diagnostic Windows GUI software Network-wide operation from any remote terminal Non intrusive protocol – runs simultaneously with the application Storage of data error and channel occupancy statistics In-built Error Rate testing capabilities Diagnostics parameters available • Transmitter Power • Received Signal Strength • DC Supply Voltage • Received Frequency Error • Radio Temperature • VSWR
Event Log
Internal Event Logging facility
General Operating Temperature Range
-40 to +70°C (-40 to 158°F) ambient
Internal Fan
Internal automatic thermostatically controlled fan
Power Supply
10-30Vdc or optional 36-72Vdc or 100-250Vac power supply
Protection mode
Full duplex (not protected) or optional half duplex (protected) hardware variants
Housing & Dimensions
Hot Standby is configured using 2 x QB450 (19” 1 RU each) plus 1 x Hot Standby Controller (19” 1 RU each) for a total of 19” 3RU’s (424.3 x 132 x 436.5mm )
Weight
15kg (33Ibs) excluding optional duplexer
Warranty
3 years on parts and labor
Approvals and Certifications Europe (ETSI)
ETSI EN300113, EN301489, EN60950
FCC
FCC PART 15, PART 90
Industry Canada
IC RS119, ICES-001
Australia
ACMA AS4295-1995 (Data)
6
Product Data Sheet Trio QH450 Model Code
TBURQH4ab-cccdeef represents the part number matrix
Model
Trio Radio QH450
TBURQ
Q Data Radios
Code
Select: Unit Type
H
Code 4
Code
Full Duplex Hot Standby Kit (with controller) - 19 “ 3RU Comprised of 2 x QB + Controller
Select: Generic Frequency Band UHF: 400 - 520 MHz Band
Select: Sub Band - UHF
L
Low Band : 400 to 450MHz
H
High Band : 450 to 520MHz
Code N
Code
Select: Hazardous Area Approvals No Approval
Select: Modulation
E00
ETSI/ACMA Region
F00
FCC Region
Code
Select: Encryption (subject to country of use)
E
256-bit AES encryption (standard)
N
No encryption
Code 1L
Code 0
Select: Licensed Feature Ethernet & Serial (Three Ethernet & two Serial Ports)
Select: Power Supply 10 - 30V DC Standard
1
-48V DC
2
Single 110/240V AC
Code
Select: Hot Standby Controller Options
A
Common Tx/Rx Antenna
B
Duplicated Tx/Rx Antennas
Note: Refer to the next page for further details on the Hot Standby Controller Options.
6
Product Data Sheet Trio QH450 Dimensions and Options
QH450 - Hot Standby Full Duplex Radio - Dimensions 16.69” (424mm) 17.18” (436.5mm)
COM 1/2
AUX
COM 1/2
AUX
ETH1
ETH2
USB
ETH3
Factory Default
5.19” (132mm)
15.91” (404.3mm)
16.7” (424mm)
16.7” (424.3mm)
15.91” (404.3mm) 15” (381mm)
QB450
QHHSC COM 1/2
ETH1
ETH2
ETH3
Base A ETH1
AUX
COM 1/2
Pwr
Sync
Tx
NoRx
Base B ETH1
COM 1/2
AUX
ETH1
ETH2
ETH3
Txd
Txd
Yes
< Red
Select
A
QB450
COM1 Com2 Error Rxd Rxd No < Green
Auto
B
USB
Factory Default
Pwr
Sync
Tx
NoRx
COM1 Com2 Error Rxd Rxd No < Green Txd
Txd
Yes
< Red
18.87” (479.3mm)
QH450 - Hot Standby Controller Kit Configurations QHHSC - Option Descriptions Description
Antenna Type
A
LNA (Rx) & RF Relay (Tx) Fitted
Common Tx/Rx Antenna
B
Duplicated Tx/Rx Ports
Duplicated Tx/Rx Antennas
QHHSC Hot Standby Controller Option
Kit Configuration
QB450
TBURQH4xx-xxxxxxxA • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00A
Tx Rx
QB450 QB450
TBURQH4xx-xxxxxxxB • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00B
QB450
RELAY (Coaxial Transmitter Switch)
B
#Note – The QH450 is a full duplex radio platform and must be deployed with suitable band pass duplexer or external filters. Internal Duplexers are not available. Suitable duplexers include TBURDUPLXBP4XXCOA. For information regarding external duplexers, contact your local sales office.
EXTERNAL DUPLEXER
© 2013 Schneider Electric. All rights reserved - February 2014
LNA (Low Noise Receiver Amplifier / Splitter)
A
Telemetry & Remote SCADA Solutions | www.schneider-electric.com
Document Number TBULMxxxxxx-xx
Trio Q Data Radios
Licensed UHF | Ethernet and Serial Data QP450
1
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems. Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment. Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/ Ethernet.
2
Product Data Sheet Trio QP450 Specifications
Trio QP450 Radio Frequency Range
400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits
Various Tx/Rx frequency splits - configurable
Channel Selection
3.125kHz channel steps
Channel Spacing
12.5 and 25kHz (software selectable)
Frequency Accuracy
±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging
<= 1ppm/annum
Radio Modes
Simplex or Half duplex
Configuration
Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter Tx Power
0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation
Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time
<1ms
Timeout Timer
Configurable 0 to 255 seconds
Tx Spurious
<= -37dBm
PTT Control
Auto (Data)
Receiver AFC Tracking
Digital receiver frequency tracking
Mute
Configurable digital mute
Connections Serial Com Port 1/2
1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds
From 600bps up to 115,200bps
Serial Com Port Flow Control
Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control
Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port
3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna
Optional: (See diagram at end of datasheet for detailed information) - 2 x N female bulkhead (Refer Option B) - 2 x N female bulkhead (Refer Option D) - 1 x N female bulkhead (Refer Option E)
Power (Supply voltage options)
10-pin locking, mating connector supplied or optional (10-30Vdc/-48Vdc) or 100-250Vac IEC socket
USB port
Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display
Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet Ethernet Protocols
Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating
Automatic and Self Learning Peer to Peer repeating
Operating Modes
Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering
Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression
Automatic Ethernet data compression
Terminal Server
Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes
Auto and Manual
SNMP
SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway
Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester
Internal ping test facility
Specifications continue on the next page
3
Product Data Sheet Trio QP450 Specifications
Trio QB450 Modem RF Channel Data Rate #
Region
Bandwidth (KHz)
Speed (Kbps)
RF Sens (1x10E-6 BER)
FCC
12.5
8 16 24 32
-116 -111 -105 -97
25
16 32 48 64
-114 -109 -103 -96
12.5
8 16 24 32
-113 -110 -107 -100
25
14 28 42 56
-114 -109 -103 -96
ACMA/ETSI
Dynamic Speed Selection
QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes
Base, remote, repeater or store n’ forward
Collision Avoidance
Channelshare+™ - Advanced dynamic supervisory collision avoidance system Carrier Sense - Carrier sense based collision avoidance system
Backward Compatibility
Backward compatible with Trio E-Series radios
Firmware
Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security Encryption*
256-bit AES
HTML Interface
Password Protected HTTP and HTTPS configuration and management interface
Console Interface
Password protected Telnet, SSH and Serial console interface
Password Protection
Password protected configuration sessions
Diagnostics Diagnostics Overview
• • • • • •
Network management and diagnostic Windows GUI software Network-wide operation from any remote terminal Non intrusive protocol – runs simultaneously with the application Storage of data error and channel occupancy statistics In-built Error Rate testing capabilities Diagnostics parameters available • Transmitter Power • Received Signal Strength • DC Supply Voltage • Received Frequency Error • Radio Temperature • VSWR
Event Log
Internal Event Logging facility
General Operating Temperature Range
-40 to +70°C (-40 to 158°F) ambient
Internal Fan
Internal automatic thermostatically controlled fan
Power Supply
10-30Vdc (nominal) or, for option B hardware, optional -48Vdc or 100-250Vac power supply
Protection mode
Half duplex - Automatic or manual changeover between internal modules
Transmit Current**
4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W
Receive Current**
1A nominal @ 13.8Vdc
Housing & Dimensions
19” 1 RU rack mount, 483 x 45 x 410mm
Weight
5kg (11lbs.)
Warranty
3 years on parts and labor
Approvals and Certifications Europe (ETSI)
ETSI EN300113, EN301489, EN60950
FCC
FCC PART 15, PART 90
Industry Canada
IC RS119, ICES-001
Australia
ACMA AS4295-1995 (Data)
6
Product Data Sheet Trio QP450 Model Code
TBURQP4ab-cccdeef represents the part number matrix
Model
Trio Radio QB450
TBURQ
Q Data Radios
Code
Select: Unit Type
P
Code 4
Code
Half Duplex Protected Radio - 19” 1RU
Select: Generic Frequency Band UHF: 400 - 520 MHz Band
Select: Sub Band - UHF
L
Low Band : 400 to 450MHz
H
High Band : 450 to 520MHz
Code N
Code
Select: Hazardous Area Approvals No Approval
Select: Modulation
E00
ETSI/ACMA Region
F00
FCC Region
Code
Select: Encryption (subject to country of use)
E
256-bit AES encryption (standard)
N
No encryption
Code 1L
Code
Select: Licensed Feature Ethernet & Serial (Three Ethernet & two Serial Ports)
Select: Power Supply
0
10 - 30V DC Standard
1
-48V DC (Option B Only)
3
Dual 110/240V AC (Option B Only)
Code
Select: Hot Standby Options
B
Duplicated Tx/Rx Ports
D
Separate switched Tx & Rx Ports
E
Common switched Tx/Rx Port
Example: TPURQB4LN-E00E1L0B specifies: Trio QP450 Redundant half duplex radio, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, 10-30V DC power supply, Duplicated Tx/Rx Ports. Communications Standards: FCC – Federal Communications Commission (USA) IC – Industry Canada ETSI – European Telecommunication Standards Institute ACMA – Australian Communications and Media Authority * Export restrictions may apply. Contact your local representative for more details. ** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps. Note: Not all product features are available in every mode of operation. Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
6
Product Data Sheet Trio QP450 Model Code
QP450 - Hot Standby Half Duplex Radio - Dimensions
QP450 - Hot Standby Half Duplex Options Hot Standby Options Tx/Rx
B
QP450 Tx/Rx
Tx
D
QP450 Rx
Description
Antenna Type
Duplicated Tx/Rx Ports
Duplicated Tx/Rx Antennas
D
Separate Switched Tx & Rx Ports
Separate Tx & Rx Antennas
E
Common Switched Tx/Rx Port
Common Tx/Rx Antenna
B
E
Tx/Rx
© 2013 Schneider Electric. All rights reserved - February 2014
QP450
QP450 Hot Standby Option Descriptions
RELAY (Coaxial Transmitter Switch)
Telemetry & Remote SCADA Solutions | www.schneider-electric.com
Document Number TBULMxxxxxx-xx
