Transcript
loudspeakers
TECHNICAL SPECIFICATIONS Frequency Response
(-10 dB) (±3 dB)
46Hz ÷ 19.3kHz 50Hz ÷ 18.2kHz
Average Dispersion 500Hz ÷ 10kHz >5 kHz 500Hz ÷ 4kHz
70° x 40° (HxV) 50° x 40° (HxV) 80° x 40° (HxV)
Impedance (ohms) Low (min) Mid (min) Hi (min)
8 8 16
Tripla II 5040
(6.6 @ 50Hz) (8.3 @ 497Hz) (10.8 @ 5560Hz)
Max Sensitivity (dBSPL 1W 1m) Low 105 Full-space 108 Half-space Mid 108 Hi 113 Power - Watts AES Low Mid High
Cont. 800 500 150
Peak 3200 2000 600
Max Output Level (calculated) Cont. Low 134 137 Mid 135 High 135 Loudspeakers and Loading LF: MF: HF:
Peak 140 (Full-space) 143 (Half-space, bass) 141 141
4x12" Hybrid loading Vented Box. 2x8" Wave Guide loaded. 1x2" Exit (3" diaphragm), Wave Guide loaded.
FEATURES
PHYSICAL PROPERTIES Product type
Compact wide-range loudspeaker system: three-ways/seven-speakers, high power, medium/long throw, assisted by dedicated active control unit.
Enclosure Material and Finish Trapezoid enclosure in 15 mm. Plywood with internal bracing, rounded corners and integral handles. Scratchproof paint. Standard accessories
Protection
Fast Hanger hanging system, 10 handles, Neutrik Speakon NL8Fc connector, ready to be fitted with trolley. Electronic, only when the dedicated Outline processors are used with limiter functions. HF:
Outline Genius6 dedicated active control unit, Tripla "Trolley", "Shower Cap", "UNIFLY" modular flying hardware.
Connectors
2xNL8 Speakon in parallel:
MF section MF section
Pin Pin Pin Pin
with four 12” (LF) woofers in hybrid reflex/band-pass configuration, two 8” (MF) midrange and a 3” diaphragm (HF) compression driver, both wave guide loaded; ferrofluid cooled HF section voice coil.
• Modular system with interchangeable components for the utmost flexibility to satisfy different acoustic coverage requirements. Can be used along with other units of the same type in array configuration.
• Triamping and control via dedicated digital processor. • The cabinet is reinforced internally to ensure the utmost sturdiness, eliminating coloration due to resonance, and is equipped with Outline’s proprietary “Fast Hanger” system for fast reasonably priced flying.
40 mF capacitor
Optional accessories
LF section
• Compact powerful (143dB peak SPL@ 1m) enclosure for triamping,
1+ 2+ 3+ 4+
pos; pos; pos; pos;
Weight (Kg) Net (gross)
88 (96)
Dimensions (cm) Height (with packing) Width (with packing) Depth (with packing)
110 (118) 55 (63) 60 (70)
Pin Pin Pin Pin
1234-
neg neg neg neg
APPLICATIONS
• Medium/long throw system. Ideal for live use in no-nonsense applications for medium/large sized concerts, for groups, bands and orchestras.
• Permanent high quality installations in theatres, clubs, indoor sports arenas, ideal for use along with Outline subwoofers for further extension of the bass range and therefore increased in dynamics.
www.outline.it
frequency response
DESCRIPTION
dBSPL
10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60
20 Hz
50
100
200
500
1K
2K
5K
10K
20K
100
200
500
1K
2K
5K
10K
20K
impedance 60
dBOhm
55 50 45 40 35 30 25 20 15 10 5 0
20 Hz
50
horizontal polars 5dB/div
90
90 120
120
60
150
150
30
-180 180
0 Deg
-150
30
-180 180
-30
-120
60
0 Deg
-150
-60
-30
-120
-90
-60 -90
500.00 1.00K 2.00K
4.00K 8.00K 16.00K
vertical polars 5dB/div 90
90 120
120
60
150
150
30
-180 180
0 Deg
-150
-30
-120
-60
60
30
-180 180
0 Deg
-150
-30
-120
-90
-60 -90
500.00 1.00K 2.00K
loudspeakers
Tripla II 5040
Via L. da Vinci, 56 - 25020 Flero (Brescia) Italy tel. +39 030 3581351 - fax +39 030 3580431 www.outline.it - e-mail:
[email protected]
4.00K 8.00K 16.00K
Professional full-range 3-way active loudspeaker system for separate amplification of each section. Comprises a low frequency section using no less than four 12” woofers in hybrid reflex/band-pass configuration, a mid section using two high efficiency 8” midrange, loaded by a symmetric wave guide with a square mouth, low compression ratio and low distortion and a high frequency section that uses a compression driver with a 2” throat and 3” titanium diaphragm, with overload protection, loaded by an asymmetric wave guide (also with a square mouth). The wave guides are built in sturdy fiberglass, with perfectly compatible dimensions and fixing system, in order to make them physically interchangeable modules to obtain the most varied acoustic combinations from the same cabinet in the event of using numerous enclosures of the same type in an array configuration. The two mid waveguides are fitted symmetrically to the HF wave guide in order to form a so-called D’Appolito configuration. In fact, thanks to this original feature, it’s possible to use the enclosure vertically or horizontally, on its own or in multiples, ensuring great adaptability to different application conditions, also thanks to its ultra-compact dimensions compared to performance in terms of sound pressure and reproduction quality. The acoustic and mechanical solutions adopted allow to obtain a useable reproduced bandwidth starting right from low frequencies up to very high frequencies (-10dB from 46Hz to 19.3kHz), with a considerable linearity of just +/-3dB from 50Hz to 18.2kHz, enabling it to be used indoors for the reproduction of sufficient low frequencies for many types of applications, including music, without any need for additional subwoofers. When triamped and hung in full space, according to AES standards, and driven with 1W at rated impedance, the system has high sensitivity for the low section 105dBSPL at 1m, 108dBSPL at 1m for the mid section and over 113dBSPL at 1m for the HF section. Driven at maximum peak power in the same acoustic conditions, each section is able to produce a maximum peak sound pressure of 140dBSPL with 3200 Watts, 141dBSPL with 2000Watts and 141dBSPL at 1m with 600Watts respectively, whereas at the respective minimum impedance (6.6 Ohms, 8.3 Ohms and 10.8 Ohms), they’re able to handle 800, 500 and 150 Watts (continuous) AES respectively. With the system standing on the floor in 2π configuration, the low section’s values will increase by 3dBSPL with the same power applied, rising to 108dBSPL 1W/1m and 143dBSPL peak at full power at 1m. Average dispersion from 500Hz to 4kHz is 80° horizontal and 40° vertical for medium sound coverage and medium/long throw applications. The cabinet is trapezoid with twin raking; it has 6 sides and is built in high quality 15mm. Baltic plywood, strengthened by suitably positioned internal bracing to eliminate any resonance of the cabinet’s sides. The black outer finish is in high quality scratchresistant paint. Connectors are two Neutrik Speakon NL8, whose contacts are interconnected to facilitate driving two enclosures in parallel. Contacts 1+ and 1- are for the first low section, 2+ and 2- for the second low section, 3+ and 3- for the mid section and 4+ and 4- for the high frequency section. The cabinet has six fast flying points, interconnected by internal steel bars that make it “load bearing". This proprietary Outline “Fast Hanger” system makes vertical or horizontal hanging of numerous units simultaneously extremely easy and reliable, by using the appropriate optional accessories. The front of the enclosure has recessed sockets for fitting an optional trolley for handling and protecting the fibreglass wave guides during transport. The trolley is equipped with long-life smooth running wheels for easy movement even on rather rough ground. Four practical handles recessed in the side panels of the cabinet ensure a positive grip during handling. On the enclosure’s top and bottom panels there are other two large handles (also recessed) to facilitate turning the boxes into working position after transport, and vice versa. The market name of the enclosure is TRIPLA II 5040.
