Transcript
TRISCANNER™ Deep Scanning Metal, Stud and Joist Locator with Sound and Calibration Indicators FINDS STUDS, JOISTS, PIPES, CONDUIT...EVEN REBAR! TriScanner™ uses advanced scanning technology to find metal (rebar, copper pipes), studs and joists behind walls, floors and ceilings. Scans through concrete, drywall, plywood and most flooring, up to 1-1/2" (3.8 cm) thick to find wood and metal studs and joists while continuously detecting “hot” electrical wires (unshielded) for safety. Finds metal through surfaces up to 1-1/2" (7.6 cm) thick, rebar in concrete up to 3" deep (7.6 cm). LED display and audio signal indicate when target has been located. Exclusive, patented features ensure instant calibration, reliability and performance.
TECHNICAL INFORMATION
• Locates metal - Finds metal pipes up to 1-1/2" (3.8 cm) deep in walls, and rebar up to 3" (7.6 cm) deep in concrete
Dimensions:
1.20 in. H x 3.00 in. W x 6.00 in. L 3.0 cm H x 7.6 cm W x 15.2 cm L
Weight:
8 oz. (230 g) with battery
Battery type:
9-Volt alkaline
Accuracy:
In Stud Scan mode, using the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 3/4" (1.9 cm) thick with a typical accuracy of 1/8" (3mm). In DeepScan™ mode, using the dual scan and mark procedure, the user can determine the center of a wood or metal stud through drywall up to 1-1/2" (3.8 cm) thick with a typical accuracy of 3/16" (5 mm).
• For extra thick surfaces - DeepScan® mode scans through up to 1-1/2" (3.8 cm) in concrete, drywall, plywood and most wood flooring to locate wood and metal studs and joists
In Metal Scan mode, using the dual scan and mark procedure, the user can determine the center of 1/2" (1.3 cm) copper pipe through drywall up to 1-1/2" ( 3.8 cm) deep with a typical accuracy of 1/8" (3 mm). Using the same procedure, the user can determine the center of 1/2" (1.3 mm) rebar up to 3" (7.6 cm) deep in concrete with a typical accuracy of 1/2" (1.3 cm).
• AC detection – Detects “hot” electrical wires (unshielded) in all modes • Automatic calibration - Patented TruCal™ instant calibration ensures accuracy • Recessed LED display signals stud edge More durable, won’t break
Audio:
Loudness = 65 dB at 18" (46 cm)
AC detection:
90 - 250 Volts at 50 - 60 Hertz laterally within 12" of hot wire to a typical depth of 2”
Operating temperature: 20° F to 120° F (-7° C to 49° C)
• Audio signal – Helps you pinpoint stud edges • Error indication - LED and audio signal tell user when to recalibrate unit
ZIRCON CORPORATION • 1580 DELL AVENUE • CAMPBELL, CA
Storage temperature:
-20° F to 150° F (-29° C to 66° C)
Humidity:
80% RH (non-condensing)
Shock resistance:
Shock resistant from a maximum six-foot (1.8 m) drop onto concrete
Water resistance:
Splash and water resistant. Not waterproof
95008-6992 • 408.866.8600 • 800.245.9265 • FAX 408.866.9230
US patents: 5352974, 4464622, 5619128, and patent pending; Canada patent: 1106932; UK patents: GB 2,117,909B & GB 2,159,630B
www.zircon.com ©1998 Zircon Corporation - Col#0069 (10/99)
