Transcript
Quick Reference Guide
TriStar
For SP3202VSPND, go to “Set Pump Address”
Default Speeds = = = =
SPEED 1 SPEED 2 SPEED 3 SPEED 4
1000 rpm 1750 rpm 2500 rpm 3250 rpm
*
QUICK CLEAN
3450 rpm Total HP 1.85/ 230V Single Phase 60Hz
*Max allowed speed of 60mins
Configuration Menu MENU
until
appears, then hold down < &
until you see
CHECK SYSTEM TIMERS ACTIVE
SPEED 1
+
are changed using the
+
SPEED 2
SPEED 3
to edit items, flashing items +
Press
to advance, < to back up
<
STOP/RESUME
<
<
Press
<
Push
MENU
QUICK CLEAN
SPEED 4
-
or -
Timers Menu - Stand Alone until
appears, then press
-
to view schedule days, use
/
-
to modify, then
<
Repeat this process until all desired timers are set MENU
to exit, and then
+
To save changes, press
then press
/ - to modify start time, then +
Push
+
use
/
to save
to adjust end <
use
+
+
Next set Timer speed
to advance
<
to change timer name, then press
<
Push
to modify
<
use
+
MENU
<
Push
to review
Quick Reference Guide - Check System Connecting TriStar for Relay Control 1. Power pump through filter relay: FILTER Relay 240VAC from breaker
DIGITAL INPUT
SW200 ON
B COM
I COM
OVRD
STEP 3
STEP 2
+12V A
STEP 1
12 345
RS485
L2 L1
2. Wire low voltage circuits for each relay with 300V rated conductors 3. Verify pump is configured for Relay Control: Locate and unlock Configuration Menu (instructions on front)
MENU
then
+
<
Press
if shows “Standalone” press
+
until
Press
to save any changes
4. Set speeds under the ‘Timer’s Menu’
Connecting TriStar to Hayward Automation*VSPND Model ONLY* Consult controller manual for compatibility AND select appropriate pump address
1. Connect with shielded 300V communciation wire (utilizing a twisted pair) 2. Set dip switches according to automation system configuration DIGITAL INPUT
SW200 RS485
+12V A
B COM
2 3
To take a closer look or see other Hayward products please go to:
1 2 3 4
OVRD
#5 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON
I COM
#4 OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON
STEP 3
#3 OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON
STEP 2
#2 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON
ON
#1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
12 345
Pool Filter Aux 1 / Spa Filter Aux 2 Aux 3 Aux 4 Aux 5 Aux 6 Aux 7 Aux 8 Aux 9 Aux 10 Aux 11 Aux 12 Aux 13 Aux 14 Lights Button
STEP 1
PUMP ADDRESS
Hayward Controller (RS485)
www.hayward.com or call 1-800-432-8387
QRG3201VSP (Rev. A)
