Transcript
Optoway
TRML-5101G
1
***********************************************************************************************************************************************************************
TRML-5101G / TRML-5101AG 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER *********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l l l l l l l l l l l l l l
The TRML-5101G series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 / SDH STM-4 and Fiber Channel. This module is designed for multi-mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.
Duplex LC Multi-Mode Transceiver ATM Form 622.08Mb/s Physical Layer Compliant SONET OC-12 / SDH STM-4 Compliant Small Form Factor 2X5 pin Package 0 to 1000 m Transmission Distance LVPECL Signal Input / Output LVTTL Transmitter Disable Input LVPECL Signal Detect Output Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating : TRML-5101G -40 to 85oC Operating: TRML-5101AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant
APPLICATIONS l ATM 622 Mbps Links l SONET/SDH Equipment Interconnect l Fibre Channel Links
LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
ORDER INFORMATION P/No.
Bit Rate (Mb/s)
TRML-5101G TRML-5101AG
SONET/ SDH
622 622
Distance Wavelength (m) (nm)
Package
Temp. (oC)
0 to 1000 0 to 1000
2X5 LC 2X5 LC
0 to 70 -40 to 85
1310 1310
TX Power RX Sens. RoHS (dBm) (dBm) Compliant -12 to -19 -26 Yes -12 to -19 -26 Yes
Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature
Symbol Tstg Topr
Soldering Temperature Power Supply Voltage Input Voltage
--Vcc ---
Output Current
Iout
Min -40 0 -40
Units o C o C
0 GND
Max 85 70 85 260 4.5 Vcc
0
30
mA
Min 3.13 0 -40 100
Typ 3.3
Max 3.47 70 85
Notes TRML-5101G TRML-5101AG 10 seconds on leads only
o
C V V
Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate
Symbol Vcc Topr
Units / Notes V o C / TRML-5101G o C / TRML-5101AG Mb/s
622
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail:
[email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRML-5101G
2
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Power Supply Current Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis
Symbol
Min
Typ
Max
Units
Notes
Po -19 ---12 dBm 1260 1310 1360 nm λ ----10 nm ∆λ ER 10 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 1.2 ns tf 1.2 ns RIN -116 dB/Hz TJ 0.55 ns Icc IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS
140 -350 350 300 -2.0 -1.1 0 Vcc – 1.3
-1.58 -0.74 0.5 Vcc 1
1 RMS (σ)
10% to 90% Values 10% to 90% Values 2
mA µA µA mV V V V V ms
3
4 4 TX Output Enabled TX Ouput Disabled
Notes: 1. Output power is power coupled into a 62.5/125 µm MM fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. Maximum current is specified at Vcc = Maximum @ maximum temperature. 4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc <3. 47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Power Supply Current Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin Pa Pd
---8 ---47 1.0 1100
---
-26 ---26 ---
1
1600
dBm dBm dBm dBm dB nm
100 -1.58 -0.74 -1.58 -0.74
mA V V V V
Icc VOL - VCC VOH - VCC VOL - VCC VOH - VCC
-2.0 -1.1 -2.0 -1.1
---------
Transition: low to high Transition: high to low
2 3 3
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. The current excludes the output load current. 3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail:
[email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRML-5101G
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN 1 2 3 4 5 6 7 8
Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TDis
9 10 MS
TD+ TDMS
Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V
MICROSTRIP1
TD-
Z=50R MICROSTRIP2
LVPECL TD+
Z=5OR 150ohm
150ohm
TDTD+ TDis Veet Vcct
10 9 8 7 6
TDis(LVTTL)
Vcc3.3V
1uH
10nF
10nF 10uF
10uF 1uH
PHY DEVICE
Veer Vccr SD RDRD+
Vcc3.3V Vcc3.3V
SFF2X5 1 2 3 4 5
130R 10nF
Vcc3.3V
10uF RD+
MICROSTRIP3 Z=50R MICROSTRIP4
82R
LVPECL
130R RD-
Z=5OR SD
1K
TO LVPECL STAGE 82R
Note: 1. 1000ΩSD Output pull-down resistor required for TRML-5101G/ TRML-5101AG (LVPECL SD Output) 2. Veer and Veet are not internally connected to each other. 3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. **********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail:
[email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRML-5101G
4
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM Units in mm
TRML-5101G / TRML-5101AG Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail:
[email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
