Transcript
TRUST 514DX 5.1 S.E. OPTICAL / Trust SC-5250 5.1 Surround Sound Card Product information A1: Jumper switch for: - Center / Subwoofer -> Swaps sound between Center Speaker and Subwoofer (5.1). UK B1: Internal S/PDIF-in -> Internal connector for DVD/CD-Rom with S/PDIF digital output B2: CD-in 1 -> Analogue audio connector for DVD/CD-Rom B3: AUX-in -> AUX-in socket B4: CD-in 2 -> Analogue audio connector for DVD/CD-Rom C1: Line-in -> Input socket for stereo equipment C2: Microphone -> Microphone socket C3: Front speakers -> Socket for Front speakers (5.1), stereo speakers (2-speaker system) or headphone. C4: Rear speakers -> Socket for Rear speakers (5.1) C5: Center / Subwoofer -> Socket for Center speaker / Subwoofer (5.1) C6: Game / Midi port -> Connector for PC joystick or Midi equipment D1: Connections for Optical / Coaxial connecting cable see E E1: Optical / Coaxial connecting cable -> Connecting cable between sound mother card and Optical / Coaxial card F1: Connection for Optical / Coaxial connecting cable see E G1: Coaxial output -> Coaxial output socket to LD, MD or AC3 G2: Coaxial input -> Coaxial input socket from LD, MD or AC3 G3: Optical output -> Optical output socket to LD, MD or AC3 G4: Optical input -> Optical input socket from LD, MD or AC3 Soundcard Installation Switch off the computer and remove the power plug from the mains power socket 1 Remove the computer’s cover and remove any previously installed soundcard from your computer. 2 If PC has onboard soundcard, first disable this in the ‘system BIOS’ . Consult users manual from PC Connect the analogue audio cable from your CD-Rom/DVD to the analogue connector on your sound card (B2 or B4) 3A Connect the daughterboard to JP1 (the pin with the red wire should be connected on the little square in the picture) Place the soundcard in a free PCI slot in your computer and screw the card firmly in place (screws not 3B included!) The PCI card screws are normally provided with the system enclosure.
Connecting 5.1 speakerset 1
SC-5250 5.1 Surround Sound Card - Connect the Front speaker cable of your 5.1 speaker set to the green Front speaker socket (C3) - Connect the Rear speaker cable of your 5.1 speaker set to the black Rear speaker socket (C4) 4A - Connect the Center Subwoofer cable of your 5.1 speaker set to the orange Center / Subwoofer socket (C5) Connecting 2.0 speakers Headphone 4B
- Connect your 2.0 speaker set to the green Front speaker socket (C3)
Connecting microphone / sound source 4C
- Connect your microphone to the pink microphone socket (C2) - Connect sound source to the orange Line-in socket (C5)
Connecting S/PDIF 4D
If the equipment has a Coaxial input socket (Mini-Disc or AC3 amplifier), connect this to the Coaxial output socket (G1)
Connecting Joystick / MPU-401 device 4E - Connect your Joystick or MPU-401 device (like Midi Keyboard) to the yellow 15 pin connector C6 Driver Installation Close computer cover and plug the power plug in the mains power socket and turn on the computer 5 A. Select “No, not this time” 6 B: Click “Next” Windows will detect new hardware. Click on “Cancel” to abort the installation. 7 Place the Trust CD-ROM 8 Because of a name change, “TRUST 514DX 5.1 SOUND EXPERT OPTICAL” into “Trust SC-5250 5.1 Surround Sound Card” the old name appears in your screen,. This is no problem. Click ‘Driver Installation’ 9 10 Click ‘Continue Anyway’ 11 Select ‘Yes, I want to restart my computer now.’ And click OK to restart the computer Select the desired speaker settings (can also be selected later via step 26) : Setting 12
2 CH 4 CH 5.1/6 CH
Used for Headphones or stereo speakers. 5.1 speaker set and audio inputs.* 5.1 speaker set.
Connection diagram Step 4B Step 4A Step 4A
* The orange connection is now the audio input (C5). Therefore, sound will not be emitted from the low 2
TRUST 514DX 5.1 S.E. OPTICAL / Trust SC-5250 5.1 Surround Sound Card tone speaker (subwoofer) or the centre speaker. Click Exit, Soundcard is ready for basic use, read chapters below for advanced use. Audio Rack Installation 13 Click ‘Audio Rack’ 14 Select the language that you wish to use to install the program and click ‘OK’ 15 Click ‘Next” and follow the on-screen installation instructions. Once the installation has been completed, select ‘Yes, I want to restart my computer now.’ And click 16 ‘OK’ Win DVD Installation 17 Click on ‘Win DVD’ 18 Click ‘Next’ 19 Click ‘Yes’ to agree the User agreement Fill in your name, company name (can be filled in with “-“) and Serial number which can be found and 20 the CD sleeve and click ‘Next’ and follow on screen instructions. 21 Click ‘Finish’ 22 Click ‘Next’ Mixer settings Click on the ‘Mixer settings’ icon in your taskbar 23 A: Select “VOL”. 24 B: Turn the desired playing source on or off. A: Select “REC”. B: Select the desired recording channel. See the table in step 35 for the correct channel. 25 Note! Use “Stereo Mix” if you wish to record from both internal and external audio inputs and a CD. A: Click the settings icon. 26 B: Select the speaker settings. See the table in step 10 for instructions. 27 Select the “Volume” tab and adjust the volume of the speaker channels. To play stereo music through all 6 speakers. Not for 5.1 games and 5.1 DVD films: 28 Select the “Sound Effect” tab and turn on 5.1 virtual speakers and any desired special effects (“Environment”). Select the “Options” tab: A: Configure the shortcut key combinations for functions such as adjusting the volume. 29 B: Enable Hot Keys C: Turn on the microphone amplifier (“Microphone Booster”). Getting SPDIF sound from the pc to the speakerset Connect the optical cable to Optical input G4 or the Coaxial cable to G2 A: Select the “Speakers” tab 30 B: select 2 speakers 3
UK
SC-5250 5.1 Surround Sound Card C: Select SPDIF Playback D: Click ‘OK’ A: Select the “SPDIF” tab B: Select 44.1 KHz 31 C: Select S/PDIF in #2 D: Click ‘Apply’ E: Click ‘OK’ Recording SPDIF sound from the pc to device (e.g. minidisk recorder) Connect the optical cable to Optical output G3 or Coaxial cable to G1 A: Select the “SPDIF” tab B: Select 44.1 KHz 32 C: Select S/PDIF in #1 D: Click ‘Apply’ E: Click ‘OK’ Now you can play files from PC to external recorder. Please also read the recording instruction in your recorder device manual Configuring 5.1 speakers and devices in Windows If you have any problems with 5.1 surround sound, it may be necessary to configure the 5.1 speakers in Windows. A: Select “Start – Run”. 33 B: Type “mmsys.cpl” C: Click ‘OK’ A: Select the “Audio” tab. 34 B: Select “Advanced”. A: Select “5.1 Surround Speakers”. 35 B: Click “OK”. A: Select “C-media Wave Device”. 36 B: Click “OK”. 37. How to test your speaker connection To make sure the speakers are correctly connected, you can use a test program “Multi Channel Audio Demo” : Start -> All Programs -> PCI Audio Applications -> Multi Channel Audio Demo You can switch the center and subwoofer channel by adjusting the jumpers on the soundcard. See farther down this manual. This function was included because there is no standard in the industry what should be center and what should be subwoofer. There are many speakersets on the market and they can all differ. If you notice huge amount of bass going through your center which is supposed to go through the subwoofer, switch the jumpers. Move the cursor to which speaker you want to test and left-click the mouse. If the set-up is correct, you can hear music coming from that speaker alone. Each channel has different music for distinction. 4
TRUST 514DX 5.1 S.E. OPTICAL / Trust SC-5250 5.1 Surround Sound Card In the screen you can select some different options: Music will give music Sound effect will let you listen to some effects the card if capable off. HRTF will let you listen to a surround sound in the form of a helicopter making a circle around your centered position. Echo will add echo to the sound. Stop will stop all sounds. Exit will exit the program. Help will display the help file of the program. 38. Technical information Use Sample rates (KHz) Play 48, 44.1 Recording 48, 44.1 Games 48, 44.1 39. Sound channels Sound source
Quality 16-bit 16-bit 16-bit
UK
Supported standards Digital audio, 6-channel, Full Duplex. Digital audio, 6-channel. “EAX 1 Aureal3D 1.0, Direct sound 3D”
Comes out of speakers
Recording channel Audio CD in Media Player 6 speakers (see step 25) “Stereo Mix” MP3/WMA in Mediaplayer 6 speakers (see step 25) “Stereo Mix” MP3/WMA in Winamp 5 6 speakers (see step 25) “Stereo Mix” 5.1 DVD Audio 6 Speakers “Stereo Mix” Mic in 2 front speakers “Front” “Microphone” Line in / interne Aux in / CD in 2 front speakers “Front” “Stereo Mix” External midi keyboard “MPU-401” Go to www.trust.com/12950 for up-to-date FAQs, instruction manuals and more information. Note! • •
• •
Audio input and microphone The external LINE IN audio input only works in the 4-speaker and 2-speaker modes (Step 26B). Turn on the microphone amplifier to increase the microphone volume (Step 29-B). Connecting the speakers If the sound of the low tone speaker and the centre speaker has been switched, swap the plugs on the speaker set or alter the position of the plastic block on the sound card For some speakers, the rear speakers are called: “surround”. Surround sound 5
SC-5250 5.1 Surround Sound Card • Preferably use the latest release of Windows Media Player to play music: http://www.trust.com/mediaplayer. • When playing a DVD, it is often necessary to configure 5.1 speakers in the media player software (for example, in WinDVD). The centre speaker is only active for speech in films.
• •
Midi Always select the MPU-401 port for communication with an external midi keyboard. To play midi files on the PC, select “Microsoft GS Wavetable SW Synth”. Setting the jumpers on your sound card.
If needed you can change the signal going to the subwoofer with the signal going to the center. Also you can make the signal for the center go to the subwoofer. This is done because there is no standard in the industry what should go to where and it can differ per speakerset. When you notice that huge amount of bass go to the center, speach is with a very low tone and the subwoofer is relatively silent then switch this.
JP3
CENTER/BASS
1-3 , 2-4
C/LFE
3-5 , 4-6
LFE/C
Note:
•
MAKE SURE THAT THE JUMPERS ARE HORIZONTALLY CONNECTED EXACTLY LIKE IN THE PICTURE. CONNECTING THEM VERTICALLY WILL CHANGE THE SOUND BECAUSE DIFFERENT CHANNELS WILL BE MIXED AND MAY CAUSE DAMAGE TO THE SOUNDCARD.
This device meets the essential requirements and other relevant conditions of the applicable European directives. The Declaration of Conformity (DoC) is available at www.trust.com/12950/ce.
Warranty & copyright • This device has a two-year product warranty which is valid from the date of purchase. Go to www.trust.com/warranty for more information. • It is forbidden to reproduce any part of this instruction manual without the permission of Trust International B.V.
6
