Transcript
CCTV Sec urit y Te ster
(Part No 81001)
High Quality High Resolution (960x240) 2.8’ TFT-LCD Colour Screen / PTZ Controller / Video signal generator / Video Level test / RS485 Data Capture / UTP (IP Network) cable tester / PTZ address scan / Audio Input Test / DC 12V 1 AMP Power Output The TruVue CCTV Security Tester is developed for the installation and maintenance of any Analogue CCTV video system. It can be used for displaying colour and BW video from any analogue CCTV camera, controlling PTZ speed domes, DC 12V 1AMP output, generating colour bar image to test RG59 cable, BNC video monitors, DVR camera inputs and testing UTP (Network) cable. Its functions, easy operation and convenient portability enable the contractor to install and maintain any CCTV Analogue video camera system, it also promotes working efficiency and cuts down the expenditure of the installation and fault finding of CCTV projects.
Application y
CCTV Analogue system installation and maintenance
y
Dome camera and all in one camera testing
y
Colour transmitting channel testing video inputs/cable
y
PTZ controller for testing speed dome cameras
Features y
Colour 2.8"TFT-LCD, 960（H）×240（V）resolution.
y
PTZ control. Pan/tilts, zooms in/out the lens, adjusts the focus, aperture & sets & calls preset position
y
DC 12V 1AMP output enables onsite camera testing and setting up
y
Video displaying. Automatically adapts and displays the video format of NTSC/PAL.
y
LCD Brightness/Contrast/Color Saturation is adjustable.
y
Video Level testing, video signals measured in IRE or mV.
y
Video Generating, The PAL system color bar video generator test RG59 cable & analogue video inputs
y
Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.
y
Cable testing. It is powerful in testing LAN cable, measuring the connecting status ，displaying the sequence of connection and the NO. of the LAN cable.
y
Multi-interface and Multi-baud rate. Support RS232, RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps.
y
Multi-protocol. Supports more than twenty PTZ protocols. For example, HIKVISION, PELCO-P, PELCO-D, SAMSUNG, BOSCH, LG, SONY, PANASONIC, etc.
y
Lithium Ion Polymer Battery (3.7V DC2000mAh). The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 11 hours for normal use after charging for 4 hours.
Specification
TruVue CCTV Tester (Part No 81001)
MODEL Video Test Signal mode
NTSC/PAL (Auto adapt)
Display
2.8 inch digital TFT-LCD ,960 x 240 resolution
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel Output
Video Output Mode
1.0 Vp-p
Video Level test
Video signals measured in IRE or mV (milli Volts)
PTZ controller Communication PTZ Protocol Baud Rate
RS232, RS422 simplex and RS485 Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Hikvision, Samsung, etc. 150,300,600,1200,2400,4800,9600,19200bps
Video Signal Generation Colour bar generation
Output channel colorbar video signal for testing monitor, DVR inputs, RG59 video cable
DC12V 1A power output DC 12 Volt output
Output DC 12V 1A power for camera
UTP CABLE TEST UTP cable test
Test UTP cable connection status and display in the screen. Easy to read the number of the test box.
RS485 data analyst Data Monitor
Captures and analyzes the command data from controlling device
POWER Power Adapter
DC5V, 2A
Battery
Built-in 3.7V Lithium polymer battery ,2800mAh
Rechargeable
After charging 3-4 hour, working time lasts 15 hours
Low Consumption
Energy saving technology
General Working Temperature
-10℃---+50℃
Working Humidity
30%-90%
Certifications
CE and FCC
Dimension/Weight
170mmx99mmx48mm/293g
Warranty
12 months from date of purchase (Conditions apply refer to user manual) The data above is only for reference and any change of the above will not be informed in advance.
For more detailed and technical inquiries, please feel free to call the sales or technical department of our company.
Alexandria Tel 02 9693 5144,
Northmead Tel 02 9890 5300
Mt Waverley Tel 03 9558 8455,
Tullamarine Tel 03 9338 2427
WA: Tel 08 6462 8080
QLD: Tel 07 3552 5966
SA: Tel 08 8297 5555
