Preview only show first 10 pages with watermark. For full document please download

Tryst Booth Assembly Instructions - Connection

   EMBED


Share

Transcript

www.connection.uk.com Tryst Booth Assembly Instructions Assembly Instructions Tryst Booth Assembly Your Tryst module will be supplied unassembled, with all the fixings supplied for the complete assembly. Fixing kit for the base will can be found in the zipped compartment under the base unit. Leg frames and appropriate fixing kit will be supplied in a separate box. This allows for the units to be transported through a building to the assembly area in a safe and easy manner. In this ‘knocked down’ format, each piece is of a suitable size to be transported in a standard lift. The number of pieces per unit supplied will be dependent on the product ordered, but will consist of: screens, seating units, table tops, leg frame and legs. Frame Assembly Metal & Wood Please note the 2 types of leg frames you could receive. Leg frame A will be supplied with the following products: STK7, STK8, STK20, STK21, STK23, STK24. Metal feet available only with this frame. If unsure on what modules the above product codes refer to please visit our website: www.connection.uk.com/products/all-products/tryst/ All other products will be supplied with leg frame B. Both metal and wooden feet are available. Leg Frame A Insert the leg into the box section one per corner and rotate the bolts anti-clockwise to tighten the legs to the frame. Each will run parallel on either side of the base. Leg Frame B Metal Insert the leg into the box section frame, one per corner and rotate the bolts anticlockwise to tighten the legs to the frame. Wood Place the leg at the end of the box section frame and secure with 3 bolts to the frame. Complete both ends of the frame. Assembly Instructions Tryst Booth Assembly Instructions 1 2 3 4 5 6 7 Remove packing glides and place the two units together Add booth support rail, leg frame and legs Repeat making a left and right Add screens to each sofa and secure internally Place the sofa, units facing each other Add final screen using the adjustable key to close any gaps Finally, secure the central screen to the booth support rail from underneath 2 1 Booth support rail Glides Glides 3 4 5 6 6 Key Fixing Holes 7 Head Office & Showroom Dogley Mills, Penistone Road, Huddersfield, West Yorkshire, HD8 0LE London Showroom 31 Great Sutton Street, Clerkenwell, London, EC1V 0NA Tel: 01484 600 100 [email protected] Tel: 020 7253 9877 www.connection.uk.com Manchester Showroom The Old Law Library, Kennedy Street, Manchester, M2 4BY © Connection Seating Limited 2017. All rights reserved.