Preview only show first 10 pages with watermark. For full document please download

Tsop Installation Mini Wave

   EMBED

Share

Transcript

Solutions and systems for soldering, rework and repair of electronics Process Guide I-TSO-02 TSOP Installation Mini Wave Equipment Required PACE Intelliheat® Power Supply TD-100 Thermo-Drive® Soldering Iron Mini-Wave® Tip (See Chart on Back) Tip Tool HP-65 HandiPik® Optional Equipment Tweezer Materials Flux-cored Solder Flux Cleaner TD-100 Procedure 1. Set a tip temperature of 343°C (650°F) for lead-free or 316°C (600°F) for leaded alloys and adjust as necessary. A B Position Component Tack Lead C D Flux Leads Fill Tip 2. Install selected Mini-Wave® tip into the TD-100 using Tip Tool. 3. Position the component ensuring proper lead-to-land alignment. Hold the component in place using the HandiPik® or tweezers. A 4. Apply flux and tack solder opposing corner leads. 5. Apply flux to ALL lead/land areas. B C 6. Clean tip on Tip & Tool Stand Sponge. 7. Apply solder to the cupped portion of tip to create a convex bead of molten solder. D 8. Position Mini-Wave tip so the solder bead contacts the top portion of leads. Slowly move tip over one row of leads to form proper solder fillets at each joint. E ® E 9.  Repeat steps 6 through 8 on remaining side of component. 10. Re-tin Mini-Wave® tip with solder. Return TD-100 to its Tip & Tool Stand. 11. Clean, if required, and inspect. Solder Component www.paceworldwide.com © 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly (001) 910-693-8620 (USA) 877-882-7223 www.paceworldwide.com Solutions and systems for soldering, rework and repair of electronics Process Guide I-TSO-02 TD-100 Tips Tips Description Tip Size - L Size - D MiniWave® N/A 3.05mm (.120") 1124-0032-P1 Angled MiniWave® N/A 3.05mm (.120") 1124-0033-P1 Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1 Angled MiniWave® N/A 2.11mm (.083") 1124-0035-P1 Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1 Angled MiniWave®, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1 MicroFine Single Sided Chisel N/A 0.9mm (.035") 1124-0040-P1 MicroFine Single Sided Chisel N/A 1.1mm (.045") 1124-0041-P1 Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1 Micro-Wave N/A 1.1mm (.045") 1124-0046-P1 Single Sided Chisel 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1 MiniWave® N/A 2.79mm (0.110") 1124-0049-P1 www.paceworldwide.com © 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly (001) 910-693-8620 (USA) 877-882-7223 Part Number