Turntable Ladder Dlk 55cs

Transcript

DLK 55CS Technical Specifications www.iveco-magirus.net Page 1 of 17 DLK 55CS Technical Specifications TURNTABLE LADDER D LK 5 5 C S SIMILAR VEHICLE IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 2 of 17 DLK 55CS Technical Specifications VEHICLE MAIN TECHNICAL DATA VEHICLE’S MISSION: The Iveco Magirus “DLK 55CS” fitted on a 6x4 Iveco chassis is designed for effective rescue and fire fighting operations from high rise building and giving access to high rise locations, having a max. working height of 55M from ground DIMENSIONS: Overall length Overall width Overall height 12,0 M approx. 2,5 M (rear view mirrors excluded) 3,8 M approx. CHASSIS: G.V.W. 33.000 kg PERFORMANCE: Maximum speed 95 Km/h approx. TURNTABLE LADDER PERFORMANCES: Working Height: 55M from ground level Rotation 360° Elevation From -10° up to +75° Extension Telescopic type with 6 sections COUNTRY OF ORIGIN OF VEHICLE: All vehicle is developed, engineered and manufactured in Germany. LAY-OUT OF THE VEHICLE IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 3 of 17 DLK 55CS Technical Specifications ISO 9001 CERTIFICATES IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 4 of 17 DLK 55CS Technical Specifications CHASSIS MAIN TECHNICAL DATA Chassis / model: IVECO / Trakker AD380T42H model year 2011 G.V.W. 33.000 Kg. Transmission: 6 x 4 (drive on rear axles) Steering: Left-hand, hydraulic power steering system recirculating-ball type. Engine: IVECO mod. “Cursor-13” diesel direct injection six (6) in line cylinders, four stroke, turbocharged with intercooler. - Emissions according to Euro3 regulations - Displacement: 12.880 cm³ - Bore: 135mm - Stroke: 150mm. - Max. output: 420 HP (309 kW) at 1900 rpm - Max. torque: 1.900 Nm. (194 kgm) at 1000-1485 rpm NOTE: no power loss from sea level up-to 1500 m. above the sea level. Cooling system: Heavy duty type, water-cooled forced by pump, with tubular finned tropical radiator and power safe fan, adequate for hot climate conditions. Gear-box: Manual type, with 16 forward gears (8 high + 8 low) plus two reverse speeds. Reverse gear engaging fitted with back light and buzzer (backup warning device). NOTE: Optional at extra charge Automatic Gearbox. Differential lock: Fitted on the rear axle Brake system: Pneumatic with two independent circuits, conforms to the EEC regulations and standards, fitted with ABS system. At front disk type and at rear drum brakes type; Engine brake fitted by decompression turbo brake; Hand brake pneumatically hand operated acting on rear wheels. Brakes: Suspension: Parabolic leaf-springs fitted with stabilizer bars (anti-roll bars) and double acting hydraulic telescopic shock absorbers. Tyres: Single at front and double at rear, size 13R22,5 or equivalent, mixed for on & off-road type, Michelin or equivalent high quality brand. Max. Speed: 95 Km/h approx. (without speed limiter) Electrical System: Voltage 24V fed by Nr.2 batteries 12V and 220 A/h each Heavy duty alternator 2240W (80A x 28V) / Starter 24V Rapid Starting Kit feed from external source also provided (see page 13). Fuel tank: made of steel, protected against corrosion, 300L capacity. Miscellaneous: - Heavy duty steel bumper connected with chassis frame, with towing hook - Headlamp protection grilles - Accessories (chassis tool bag, spare wheel, jack and wheel chocks). IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 5 of 17 DLK 55CS Technical Specifications CABIN Type Original IVECO SINGLE CABIN suitable for one (1) driver plus two (2) firemen. Forward control, tilt-able type, made in all steel construction with integral anti-corrosion treatment by cataphoretic dip. Doors
n. 2 (one on each side) lockable type, with electric operated side windows. Accommodation
n.1 adjustable driver’s seat;
n.2 co-driver seat, beside the driver’s seat; All the above 3 seats are vinyl trimmed and are also provided with safety belts and head-restraints. (1 + 2 Seats) Internal equipment
Air Conditioning System, F.F. Controls
P.T.O. control for engagement/disengagement;
“pump engaged” warning light;
emergency electrical equipment;
storage lockers and folding step “ opened” warning light. OPTION AVAILABLE WITH EXTRA CHARGE Double Cabin (1+5 Seats) FIRE FIGHTING EQUIPMENT The whole F.F. equipment, consisting of the bodywork and the hydraulic system are fixed on a sub-frame mounted on the chassis frame that allows to reduce the vibrations from the rough terrain. This sub-frame is connected to the chassis members by elastic silent-block joints. This system realised by IVECO MAGIRUS assures the perfect stability of the entire superstructure and therefore by this technical configuration the system avoid any transmission and influence of transversal/longitudinal forces or oscillations coming from the chassis members torsion directly to the body, tanks and pump, coming during operation on “off-road conditions”. By utilising this system the bodywork, the tank and the pump unit remain constantly parallel to the ground independently of the transversal and longitudinal movements of the chassis’s frame and wheels position. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 6 of 17 DLK 55CS Technical Specifications BODYWORK Construction: Superstructure made in “ALU-FIRE SYSTEM”, with body frame made completely by high quality aluminium extrusion profiles connected with special joints with screw and without any welding, and properly panelled by light alloy sheets. By this new conception of manufacturing process IVECO MAGIRUS get a bodywork entirely made of aluminium, whose main advantages are:
completely corrosion proof body and therefore longer lasting;
lighter weight and therefore bigger reserve of usable carrying capacity;
flexibility in setting up the internal lockers partitions;
easiness of repair in case of eventual accidents. Storage lockers: The Single Cab vehicle can be provided with 6 (six) storage lockers
Nr. 2 side high lockers (one on each side of the vehicle) located behind the cabin, closed by anodised light alloy roller shutters with wide handle grip and internal automatic illumination with pilot lamp in the driver’s cabin. NOTE: These front storage lockers can be provided only when the vehicle is manufactured with the standard Single Cabin. In case of wide double cab (1+5 seats) these high locker are not available.
Nr. 4 side lower lockers (two on each side of the vehicle), closed by roller shutters made in light alloy. SIMILAR LAY-OUT OF THE BODYWORK WITH SIDE HIGH LOCKERS IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 7 of 17 DLK 55CS Technical Specifications TURNTABLE LADDER The vehicle is provided with and hydraulic ladder system with vertical outreach of 53,5m measured from rescue cage bottom line, and working height of 55m. The ladder is made by six (6) sections suitable to the ladder outreach. Ladder installed on chassis by means of turntable having unlimited 360° rotation possibility in either direction. Power generated by a hydraulic pump driven by PTO on chassis engine. Ladder elevation & depression movements are driven by two hydraulic cylinders. Elevation, depression, vertical & horizontal simultaneous movements are possible at the same time without mutual interference. Ladder angle range: downward inclination to –10° and elevation up to +75°. Two Control Panels with colour displays are fitted. One at Main operator control stand and one at Recue Cage: both control colour display panels are fully equipped with elevation, depression and rotation controls, plus safe operation status indicator on ladder control panel in both English & Arabic languages. Safety features cut out the system automatically in case of malfunction, overload or maximum reach in addition to safety features for personnel plus emergency interruption feature of ladder movements (dead man pedal). Control of vehicle engine on/off is possible from main control panel, from cage panel and from driver’s cab. Control panel made of special material resisting corrosion, direct water effect & adverse weather conditions; this also apply on controls, indicators and gauges. Ladder control display (TFT – multicolour type) provided indicating safe ladder section movement during elevation & lowering in addition to angle indicator side panel. Provision consisting in a flexible plastic cover is provided to protect the control panel when ladder is not in use. LADDER ADDITIONAL TECHNICAL DATA Extension and retraction of the ladder is carried out by means of two extension and two retraction cables which are wound on a cable winch. An hydraulic motor drives the winch. The ladder is provided with the new Magirus lateral adjustment system which is capable of keeping automatically levelled the turntable and the main control stand up to 8,5° slope, even during the rotation of the ladder. All ladder oscillations are stabilised or actively damped by means of the new CS computer system (CS – Computer Stabilised). Ladder movement is automatically switched off at the operation limit and a visual indication appears on the operating panel diagram. If there are malfunctions of safety devices, the ladder remains fully capable of operation but is automatically returned to the maximum area of operation that remains possible. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 8 of 17 DLK 55CS Technical Specifications LADDER WORKING DIAGRAM IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 9 of 17 DLK 55CS Technical Specifications STABILIZATION SYSTEM On the Iveco Magirus Turntable Ladders a fully automatic stabilization system, operated by means of Qty 4 side outriggers quadric-cross construction, hydraulically driven for levelling when operating the ladder section, diagonal shape. Separate control of each outrigger is possible. Automatic levelling system when operating the ladder. Light reflective finishing. Warning yellow lights. Two dedicated control panels at rear of body (one on right and one on left). Providing a level indication system reading of 8,5 degrees of vertical line. JACKING SYSTEM ADDITIONAL TECHNICAL DATA The exceptional stability of the vehicle is attained by rear axle suspension locking and the hydraulically operated Vario CS Jacking System with computer stabilized technology. All jacks can be extended individually and infinitely from approx. 2.5m up to 5.2m. The projection values are continuously adapted and processed by the computer who always calculate the projection range. The working area range of the turntable ladder therefore increases continuously with every centimetre of jacking width. ADVANTAGES OF THIS SYSTEM: - Projection of jacks individually operated; and infinitely adjustable control; - Vehicle tyres are always touching the ground. So the parking brake can be still used for avoiding any possibility of sliding; - The lower jacking design (diagonal shape) allow easy stepping over and the use of the ladder in narrow streets with parked vehicles. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 10 of 17 DLK 55CS Technical Specifications RESCUE CAGE Rescue cage is automatic foldable type, permanently fixed on the top of the ladder (but can be also removed), allowing to operate the lift while the cage is place. It is designed to carry a weight of 300 Kg (or 3 persons) / Dimensions 0,83 x 1,50 x 1,15M. The cage is made of steel treated against corrosion with barriers & partitions made of aluminium. It is provided with two front wide entrances allowing the fire-man to get into the cage easily and quickly and one rear entrance from the ladder steps. Protection water curtain is also provided. It is provided with a complete Cage Control System of ladder movement in addition to main control one on base. All the function are electronically transmitted via cables to the main hydraulic control system. CAGE ADDITIONAL TECHNICAL DATA The rescue cage permanently fixed on top of the ladder, but during driving operations it is in horizontal position and it comes automatically in the working position while extending the outrigger system. With this system the cage is ready for use as soon as the ladder is stabilized. For further details please refer to the following page. RESCUE CAGE FITTINGS: A) Qty 2 Front Doors (one on each side) B) Qty 1 Rear Door (to ladder section) C) Qty 1 Front Light (in the center) D) Qty 2 Electric Sockets 220V fed by the generator supplied with the vehicle. E) Qty 2 Fixing devices (for monitor etc.) D E E B C A A Water Monitor provided - 2.000L/min. manually controlleD from cage IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 11 of 17 DLK 55CS Technical Specifications MAGIRUS RESCUE CAGE MODEL RK 300CS Automatic foldable type, permanently fixed on the top of the ladder (but can be also removed), allowing to operate the lift while the cage is place. Capacity of 300 Kg (3 persons). Provided with two front wide entrances and one rear entrance from the ladder steps. Protection water curtain is also provided. Provided with a complete Cage Control System of ladder movement in addition to main control one on base. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 12 of 17 DLK 55CS Technical Specifications RESCUE LIFT INSTALLATION The RESCUE LIFT is a special rescue device also called “elevator” for going up & down very fast (from the ground level up to top of ladder) with a capacity for two persons in one time. The lift can be utilized during various ladder elevations. Automatic slowing system on start & stop and automatic stop when limit positions are reached. LIFT ADDITIONAL TECHNICAL DATA The lift equipment consists of: - The lift winch on the lower ladder section, hydraulically driven by an oil pressure motor, with proportional control of lift speed. - Push button for lift or ladder operation at main control stand. - Automatically extending guide rails at the base of the bottom ladder so that the lift can be lowered down to the ground. Additional safety devices: - Automatic mechanical safety brake in case of cable breaks. - Hydraulically ventilated brakes in the cable winch. - Safety device to prevent loose lift cable. RESCUE LIFT IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 13 of 17 DLK 55CS Technical Specifications EMERGENCY ELECTRICAL EQUIP. In addition to the standard electrical equipment foreseen by the International regulations and the local traffic regulations, the following equipment is provided: AUDIBLE WARNING DEVICES A multi-tone electronic siren with P.A. system (wail/yelp/two-tone system) with microphone in the cab and one tone warning device located on the roof. VISUAL WARNING DEVICES Two rotating beacons red or blue colour fitted on cabin roof. RADIO PROVISION A 24V-12V converter is installed in a suitable position in the cabin. Pre-arrangement for the antenna to be installed on roof cabin is also provided. The vehicle is insulated against radio interference. NOTE: Radio and suitable antenna to be provided by the Customer and not included in the offer. SWIVEL SEARCH-LIGHT A Searchlight 24V/70W is fitted at front of cabin (right side). SPOT-LIGHTS N.4 Spot-Lights 24V/70W are fitted on ladder sections to illuminate the working area, such lights are located two at the base of the first section and two ad middle section. LOCKERS LIGHTING All side storage lockers and pump compartment are provided with fluorescent light, weather resistant type with automatic ignition at the opening of the storage lockers, with warning light fitted on the cabin dashboard indicating that the lights are “ON”. A lockers lights master switch in the cabin is also provided. RAPID STARTING KIT Working at 220/230V-50Hz through an electric cable and quick-release self-ejecting plug, automatically released at starting the vehicle’s engine. This system is keeping the vehicle’s batteries always charged allowing prompt and reliable operations. ELECTRIC GENERATOR One MotorGenerator 5KVA 220V driven via a petrol engine is fitted on the turntable. Such electric generator is used for : - To provide electric power (220V-50Hz) in the rescue cage; - To operate an emergency pump to be used in case of main hydraulic system failure. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 14 of 17 DLK 55CS Technical Specifications ACCESSORIES & TOOLS Fire Fighting & Rescue Equipment (supplied on suitable fixing)
N. 4 Suction hoses 2M long each (Storz A or BSS 4” couplings);
N. 1 Suction strainer with wire basket;
N. 2 Spanners for suction hoses;
N. 1 Delivery hose 55M long , (Storz B or BSS 2,5” couplings) to feed the monitor in the cage;
N. 1 Delivery hose 20M long , (Storz B or BSS 2,5” couplings);
N. 2 Hose bridges;
N. 1 Cage Monitor, output 2.400L/min., manual controlled from inside the cage;
N. 1 Variable Water nozzle 500L/min. (Storz B or BSS 2,5” coupling);
N. 2 Fire Extinguishers dry powder ABC type 6 kg each;
N. 1 Fire Extinguisher CO2 type 5 kg;
N. 1 Fireman’s axe with wooden axe;
N. 1 Hooligan Tool. Accessories (supplied on suitable fixing):
N. 1 Tool bag for the chassis (standard type);
N. 1 Fire Fighters tool box (professional type, see the details on last page);
N. 1 First Aid kit;
N. 2 Wheel stoppers (chocks);
N. 1 Spare wheel complete with spare tire (same size of the other ones supplied on the truck);
N. 1 Hydraulic jack suitable for the vehicle. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 15 of 17 DLK 55CS Technical Specifications PAINTING / STRIPES / LOGOS Cab & Bodywork Fire Red RAL 3000. Bumpers and fenders Dark grey Storage lockers Natural grey aluminium Fire Pump Standard Silver Stripes White reflective stripes around the vehicle. Writings & Logos according to Customer requirements. OTHERS Manual & Catalogue Hardcopy of Use & Maintenance manual and Spare Parts Catalogue in English or Italian language for the Superstructure. Labels Fitted in English language where international pictograms don’t serve the purpose. Training One-Week Training provided by our qualified technician in Italian or English language (in any country but not in IRAQ). Warranty Three-Years full warranty covering chassis, superstructure and equipment (the warranty period is starting from the date final delivery at site). Spare Parts A Recommended List of Fast Moving Spare Parts for 2-years operations is offered as OPTION with extra charge. For further details please refer to the list attached on the following page and to our Economical Offer. IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 16 of 17 DLK 55CS Technical Specifications PROFESSIONAL TOOL BOX (Part N° 2051501968) - Dimensions: 440 x 210 x 230 mm - Material: steel - Type: divided in compartments to contain the following tools = Complete set of wrenches USAG 252NC/12 = Nr.1 tongs USAG 199 200 = Nr.1 pliers USAG 150 180 = Nr.1 cutting nippers USAG 188 160 = Nr.1 screwdriver USAG 322 - 1,6x8x175 = Nr.1 screwdriver USAG 322 - 1,2x6,5x100 = Nr.1 screwdriver USAG 322 - 0,8x4x150 = Nr.1 screwdriver USAG 322 - PH 1x80 = Nr.1 screwdriver USAG 322 - PH 2x100 = Nr.2 pliers USAG 180 V 240 = Nr.1 pliers USAG 134 250 = Nr.1 small hammer gr.200 = Nr.1 hammer gr.500 = Nr.1 sledge hammer gr.2000 = Nr.1 bushhammer = Nr.3 chisels USAG - different purposes and sizes = Nr.1 shear USAG 203B = Nr.1 shissors USAG 207A = Nr.1 hacksaw = Nr.10 spare blades for hacksaw = Nr.1 cutter = Nr.10 spare blades for cutter = Nr.3 roll tapes - different types. =========== IVECO MAGIRUS – Export Dept. – July 2011 ============== IRAQ 2011 – Turntable Ladder 55M www.iveco-magirus.net Page 17 of 17