Transcript
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 1 of 84
Exhibit F Rig Summary
NY\6174610.14
01:15315563.1
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 2 of 84
Rig Overview Ecuador
3
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 3 of 84
RIG #102 CARRIER MOUNTED 1000 HP MECHANICAL DRILLING RIG
4
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 4 of 84
RIG TYPE:
Carrier Mounted - 1000HP Mechanical Drilling Rig
RIG MAKE:
Loadcraft Manufactured, 2009 Model
DRAWWORKS:
Loadcraft 1000HP Drum 42 X 12 Two (2) 717HP Caterpillar C15
AUXILIARY BRAKE:
Hydra Brake, Model H100-10040-200
MAST:
Loadcraft Double Mast 116 ft 410,000lb. Hook Load w/10 Lines (1 1/8”); 330,000lb. Hook Load w/8 Lines (1 1/8’’)
SUBSTRUCTURE:
Loadcraft Hydraulic Telescoping Substructure 17’ with 14’ clear under rotary beams; Capacity of 410,000lb.
TRAVELING BLOCK:
American Block 250 Ton
SWIVEL:
Manufacturer: McKinney; Model: Artic T200; Load Rating: 200 Ton
TOP DRIVE:
Warrior Mfg. 250 Ton Hydraulic
ROTARY TABLE:
Hacker 27.5”; 44” centers complete with split square solid steel master bushing
MUD PUMPS:
Two (2) National Oil Well 9-P-100 Triplex 1000 HP Powered by Two (2) MTU-DD 2000 Series 850HP
MUD SYSTEM:
Two (2) Tanks (370 BBLs)
SOLIDS CONTROL:
One (1) Swaco Mud Cleaner Two (2) Brand Mini Cobra Shakers
CENTRIFUGAL PUMPS:
Four (4) 6x5x11 Derrick (75 HP) Two (2) 5x6x14 MCM (50 HP)
BOP EQUIPMENT:
One (1) Shafer 11’’ x 5,000psi Double Gate One (1) Shafer 11” x 5,000psi Annular
CHOKE MANIFOLD:
4-1/16” and 2-1/6” x 5,000psi w/ One (1) Manual Chokes and One (1) Hydraulic Choke
BOP CLOSING UNIT:
4 Station – 110 Gallon Accumulator OCO
POWER GENERATION:
Two (2) Detroit Diesel MTU Gen-set; 480V, 3PH, 380Kw, 60Hz, 475KVA
POWER DISTRIBUTION:
IEC Custom 600V, 600Amps
WATER TANK:
One (1) 500 BLS
FUEL TANK:
One (1), 12.000 gallons, Sight gauges
5
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 5 of 84
TUBULAR HANDLING:
Catwalk, Pipe racks, V-door
DRILL STRING:
S135 – 11,780ft. 3-1/2” x 13.3lb (9) – 4-3/4” DC; 47 Lb/Ft (15) HWDP 3-1/2” 23,2 Lb/Ft
HANDLING TOOLS:
As required for all DP and Collars
CASING HANDLING TOOLS:
Casing Tools SMX-150T: 8” (VARCO-BJ), 10 ¾” (WTM)
INSTRUMENTATION:
AOI Weight Indicator, Model 50, 10 Lines
SKIDDING PACKAGE:
NA
RIG CAMP:
17 Campers Total
MAIN CAMP:
NA
MATERIAL HANDLING:
One (1) Wheel Loader John Deere 544J
6
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 6 of 84
RIG #104 500 HP CARRIER MOUNTED MECHANICAL WORKOVER RIG
7
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 7 of 84
RIG TYPE:
500HP Carrier Mounted Mechanical Workover Rig
RIG MAKE:
CARE Industries 300 Series
DRAWWORKS:
ALCO 500DD (50HP) 42 X 10 Drum size One (1) 525HP Detroit Diesel 60 Series
AUXILIARY BRAKE:
Hydra Brake, Model P0324
MAST:
CARE Industries Double Mast 112 ft 300,000lb. Hook Load w/8 lines (1 1/8’’)
SUBSTRUCTURE:
CARE Industries – 16’ floor Height Hydraulic Telescopic Capacity of 300,000lb.
TRAVELING BLOCK:
American Block 200 Ton
SWIVEL:
Arctic 200 Ton
TOP DRIVE:
N/A
ROTARY TABLE:
Continental EMSCO 17” Opening, Model 1750, 110
MUD PUMPS:
One (1) Gardner Denver PZ-7 Powered by One (1) 650HP Detroit Diesel 60 Series
MUD SYSTEM:
One (1) Mud Tank 300 BBLs
SOLIDS CONTROL:
NA
CENTRIFUGAL PUMPS:
Four (4) 6 x 5 x 11 National Oil Well, Model 250
BOP EQUIPMENT:
One (1) 11’’ x 5000 psi Shaffer Annular One (1) 11’’ x 5000 psi Shaffer Double Gate One (1) HCR
CHOKE MANIFOLD:
3 1/16’’ x 5,000 psi Choke Manifold One (1) Hydraulic Super Choke
BOP CLOSING UNIT:
OCO 4 station, 3000 PSI, 110 Gallon 10 Bottles (11 gallon bottles)
POWER GENERATION:
Two (2) Detroit Diesel MTU Gen-set 480V, 3PH, 380Kw, 60Hz, 475KVA
POWER DISTRIBUTION:
N/A
WATER TANK:
One (1) Tank 110 BBLs
FUEL TANK:
One (1) Tank 50 BBLs
8
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
TUBULAR HANDLING:
Catwalk, Pipe racks, V-door
DRILL STRING:
10,700 ft 3 ½’’ S – 135 Drill Pipe 6 Each 4 ¾’’ Drill Collars
HANDLING TOOLS:
As required on a project by project basis
CASING HANDLING TOOLS:
Elevator (Drill Pipe or Collar); Power Slips
INSTRUMENTATION:
Forum 1/8” 8 lines 360 Serie D 0025 - 8118
SKIDDING PACKAGE:
NA
RIG CAMP:
Four (4) Campers Total
MAIN CAMP:
NA
HANDLING MATERIAL:
NA
Page 8 of 84
9
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 9 of 84
RIG #105 650 HP CARRIER MOUNTED MECHANICAL WORKOVER RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 10 of 84
RIG TYPE:
650HP Carrier Mounted Mechanical Workover Rig
RIG MAKE:
CARE Industries 400 Series
DRAWWORKS:
ALCO 700DD (650HP) 42 X 10 Drum size One (1) 665HP Detroit 60 Series
AUXILIARY BRAKE:
Hydra Brake, ODESA 202
MAST:
CARE Industries Double Mast – 116’ Static Hook Load Capacity 400,000lb. w/8 lines
SUBSTRUCTURE:
CARE Industries – 16’ floor Height Max. Set back Capacity 300,000lb. Max. Rotary Capacity 425,000lb.
TRAVELING BLOCK:
McKissick 868, Hook combination 5ea x 30” OD Sheaves
SWIVEL:
Arctic 250 Ton.
TOP DRIVE:
N/A
ROTARY TABLE:
CECO 17 ½” Opening, Series 413
MUD PUMPS:
One (1) Gardner Denver PZ-7 Powered by One (1) 650HP Detroit Diesel 60 Series
MUD SYSTEM:
One (1) Mud Tank 300 BBLs
SOLIDS CONTROL:
One (1) Swaco Shaker
CENTRIFUGAL PUMPS:
Three (3) 6 x 5 x 11, Mission 250
BOP EQUIPMENT:
One (1) 11’’ x 5000 psi Shaffer Annular One (1) 11’’ x 5000 psi Shaffer Double Gate One (1) HCR
CHOKE MANIFOLD:
3 1/16” x 5,000 psi Choke Manifold One (1) Hydraulic Super Choke
BOP CLOSING UNIT:
OCO, type 80, 10 each (11 gallons bottles), 4 station
POWER GENERATION:
Two (2) Detroit Diesel MTU Gen-set 440V, 3PH, 380Kw, 60Hz, 445KVA
POWER DISTRIBUTION:
N/A
WATER TANK:
One (1) Tanks 100 BBLs
FUEL TANK:
One (1) Tank 1770 Gallons
TUBULAR HANDLING:
Catwalk, Pipe racks, V-door
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 11 of 84
DRILL STRING:
Drill Pipe: 2,170 feet 6 Each 4 ¾’’ Drill Collars
HANDLING TOOLS:
As required on a project by project basis
CASING HANDLING TOOLS:
Casing Manual Tongs 3 ½” – 13 5/8”; Hydraulic Tong 2 3/8” – 4 ½”
INSTRUMENTATION:
FORUM, Model AA-15, Series 343501
SKIDDING PACKAGE:
N/A
RIG CAMP:
Four (4) Campers Total
MAIN CAMP:
NA
MATERIAL HANDLING:
NA
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 12 of 84
RIG #108 HELI-PORTABLE 650 HP MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 13 of 84
RIG TYPE:
Heli-Portable 650 HP Mechanical Drilling Rig
RIG MAKE:
CARE Industries Series 400 Drilling Rig
DRAWWORKS:
CARE 700 DD-H (650HP) One (1) 660HP Detroit 60 Series
AUXILIARY BRAKE:
48” Kobelt Disc Brake
MAST :
CARE Industries Telescoping Double Mast 116 ft. 400,000lb. Hook Load w/8 Lines (1 1/8’’)
SUBSTRUCTURE:
CARE Industries 16’ floor Height Hydraulic Telescopic Capacity of 350,000lb.
TRAVELING BLOCK:
American Block 150 Ton
SWIVEL:
National 150 Ton
TOP DRIVE:
N/A
ROTARY TABLE:
Hacker International; Model OB-17,5”
MUD PUMPS:
Three (3) OIME H-700-B Triplex Powered by Three (3) 650HP Detroit Diesel 60 Series
MUD SYSTEM:
Pill - Dimensions: 8' X 10' X 6' Volume 82 BBLS Suction - Dimensions: 8' X 10' X 6' Volume 82 BBLS Four (4) Settling - Dimensions: 10' X 10' X 6' Volume 100 BBLS Shaker - Dimensions: 10' X 10' X 6' Volume 48.7 BBLS
SOLIDS CONTROL:
N/A
CENTRIFUGAL PUMPS:
Two (2) Mission 6 X 5 X 11 w/50HP Motor
BOP EQUIPMENT:
One (1) 11” x 5000 psi Annular Two (2) 11” x 5000 psi Single Gate One (1) 2” x 5000 HCR Valve One (1) 2” x 5000 Kill line Valves
CHOKE MANIFOLD:
2 1/16” x 5,000 psi Choke Manifold One (1) Manual Choke 5000psi
BOP CLOSING UNIT:
OCO 4 station, 3000 PSI, 110 Gallon 10 Bottles (11 gallon bottles)
POWER GENERATION:
Three (3) MTU 250J Gen-set w/335HP John Deere Engine, 220kW, 275kVA MagnaMax Generator
POWER DISTRIBUTION:
Electrical Building 480V, 400A, 3PH
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 14 of 84
WATER TANK
Tank # 1 Dimensions: 130” X 125”' X 86”' Volume 808 feet cubic Tank # 2 Dimensions: 132” X 130” X 86” Volume 854 feet cubic Tank # 3 Dimensions: 154” X 125” X 86” Volume 958 feet cubic Tank # 4 Dimensions: 129” X 129” X 86” Volume 828 feet cubic Tank # 5 Dimensions: 129” X 129” X 86” Volume 828 feet cubic
FUEL TANK:
Tank # 1 Dimensions: 128” X 124”' X 86”' Volume 790 feet cubic Tank # 2 Dimensions: 130” X 124” X 86” Volume 802 feet cubic Tank # 3 Dimensions: 128” X 125” X 86” Volume 796 feet cubic Tank # 4 Dimensions: 128” X 125” X 88” Volume 814 feet cubic Tank # 5 Dimensions: 128” X 125” X 86” Volume 796 feet cubic
DRILL STRING:
7,400 ft. of 4 ½” Drill Pipe 15 each 4 ½” HWDP 17 each 6 ½” Drill Collars
HANDLING TOOLS:
Catwalk, Pipe racks, V-door
CASING HANDLING TOOLS:
Casing Tong: Five (5) for: 4 ½” DP, 3 ½” DP, 6 ½” DC, 9 5/8” Casing, 7” Casing
INSTRUMENTATION:
Martin Decker / Totco Weight Indicator
RIG CAMP:
(35) Campers Total, dimension: 20´ x 8´ x 8´ each
MAIN CAMP:
NA
MATERIAL HANDLING:
Two (2) All Track Crane 500
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 15 of 84
RIG #117 HELI-TRANSPORTABLE 2000 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 16 of 84
RIG TYPE:
2000HP Electric/Heli-Transportable Electric Drilling Rig
RIG MAKE:
Guanghan Yong Hong Machine Company
DRAWWORKS:
Guanghan Yong Hong 2000HP FPI Tornado F-20 EH Two (2) 100HP Yonge YZ08 Traction Motors
AUXILIARY BRAKE:
EATON Air Flex 4-36
MAST:
Guanghan Yong Hong 147 ft x 29.5 ft 1’000,000 lbs. Hook Load w/12 Lines (1 ½’’)
SUBSTRUCTURE:
Guanghan Yong Hong 30’ Floor Height Capacity of 1’300,000lbs.
TRAVELING BLOCK:
Lanzhou National Oilwell YC 450-2 Model 1-1/2” Grooving 496 Ton Capacity.
SWIVEL:
Lanzhou National Oilwell Type, SL 450-5 Model, 496 Ton. Integrated Kelly Spinner
TOP DRIVE:
Canrig 1050E-712 1’000,000lbs Rated Capacity
ROTARY TABLE:
Langhou C-275, ZP-275 model, 27-½” size, 500 Ton Capacity
MUD PUMPS:
Six (6) Maxum M-800 800HP Powered by Six (6) 800HP Yonge YZ08 Traction Motor
MUD SYSTEM:
Twelve (12) mud tanks 12.9’ x 7.6’ x 7.6’ 112 BBLs capacity One (1) 8.4’ x 10’ x 8.5’ trip tank
SOLIDS CONTROL:
Three (3) Derrick Model FLC-503 Linear Shakers One (1) Swaco Shaker One (1) Derrick Desander One (1) Derrick Desilter Nine (9) 15HP Agitators
CENTRIFUGAL PUMPS:
Nine (9) 8”x 6” x 14” impeller, 75HP Motor
BOP EQUIPMENT:
Annular Preventer, 13-5/8” x 5000 psi Hydril GL Type Ram preventer 13-5/8” x 10,000 psi Cameron, Type U Double Ram preventer 13-5/8” x 10,000 psi Cameron, Type U Single.
CHOKE MANIFOLD:
Size 4-1/16” 10,000 psi , CIW, 3 1/16" x 10,000 psi Manual Choke, Swaco H2S, 3 1/16" x 10,000 psi Auto Choke Six (6) Cameron , 3 1/16" x 10,000 psi Four (4) Cameron, 4 1/16 x 10,000 psi Manual Valves, 3 1/16’’ 10,000 psi Positive Choke, 2 1/16” 10,000 psi flange type Gauge
BOP CLOSING UNIT:
6 Stations USA Oiltools, Style 2000, 3000psi, 24 bottles Capacity 280 gal.
POWER GENERATION:
Four (4) 1680HP Caterpillar 3512D 1800 rpm Engines w/ Four (4) Marathon MagnaMax Generators 1714 KVA, 1650 Amps, 1200 KW, 600 V, 60 Hz
POWER DISTRIBUTION:
International Electric Corporation (IEC System LCC) 1200/1500 model, Four (4)(2 x SCR, 1 x Gen House, 1 x MCC), Six (6) SCR bays
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 17 of 84
WATER TANK
Eight (8) Water tanks 12’8’’ x 7’6’’ x 7’6’’ Capacity 115 gal. Each
FUEL TANK:
Four (4) 1,800 gallons each
TUBULAR HANDLING:
Catwalk, Pipe Racks, V-door
DRILL STRING
5” D/p 19.50 L/ft S135 NC50 total ft (4370’ available). 9 ¾” D/c Spiral (4) 8 ¼” D/c spiral. (6) 6 ½” D/c spiral. (15) 4 ¾” D7c spiral. (6) 5” H/w Drill Pipe (20)
HANDLING TOOLS
As required for all DP and Collars
CASING HANDLING TOOLS:
Casing Elevators Model SLX-150T 20”, 13 3/8”, 9 5/8”, 7”, 4 ½”
INSTRUMENTATION
Martin Decker EB weight indicator system
SKIDDING PACKAGE:
Under Construction
RIG CAMP:
10 ea campers
MAIN CAMP:
23 ea campers
MATERIAL HANDLING:
NA
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Rig Overview Colombia
Page 18 of 84
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 19 of 84
RIG #101 1000 HP MOBILE MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 20 of 84
RIG TYPE:
1000 HP Series Mobile Mechanical Drilling Rig
RIG MAKE:
Loadcraft Manufactured (2009)
DRAWWORKS:
Loadcraft Industries Model 1000
AUXILIARY BRAKE:
202 Parmac Hydro Brake
MAST:
Loadcraft 114 ft x 410,000 lbs w /10 Lines (1 1/8”)
SUBSTRUCTURE:
Loadcraft Hydraulic Telescoping Substructure 17 ft. Rotary capacity-660,000 lb.; setback capacity-250,000 lb.
TRAVELLING BLOCK:
American Block 200 Ton
SWIVEL:
N/A
TOP DRIVE:
Warrior 250 Ton Hydraulic Drill torque: 12,500 to 16,892 ft. lb.;max make up torque: "25,050 to 33,78 ft. lb.
ROTARY TABLE:
Hecker 22” 250 Ton
MUD PUMPS:
Two (2) model: PZ-8 triplex pump (1,600 HP) – Gardner Denver Two (2) Caterpillar 3508 Drive Engines
One (1) model: PZ-7 triplex pump (550 HP) – Gardner Denver One (1) Caterpillar C15 Drive Engine MUD SYSTEM:
900 Barrel System 80 Barrel Trip Tank 75 Barrel Pill Tank Six (6) 5 HP agitators Tree (3) 10 HP agitators
SOLIDS CONTROL:
One (1) Meerkat Dual PT with (2) Shakers One (1) Swaco 3-1 mud cleaner – 12 cone desilter, 10 cone desander with King Cobra shaker One (1) Swaco vacuum degasser – Ventury Vacum Type
CENTRIFUGAL PUMPS:
Seven (7) Derick 250 – 6x5 c/w 50 HP motors One (1) Badger– 6x5 c/w 50 HP motor
BOP EQUIPMENT:
One (1) 11” x 5,000 psi Flow Control (GK) annular One (1) 11” x 5,000 psi Shafer LXT Double 5M One (1) 4 1/16" x 5M psi HCR valve (choke side)
CHOKE MANIFOLD:
Two (2) 4-1/16” x 5,000 psi manual gate valves Nine (9) 2-1/16” x 5,000 psi manual gate valves One (1) OCO hydraulic choke valve: 2” x 5,000 psi
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 21 of 84
BOP CLOSING UNIT:
OCO Type 80 12 x 11 Gallon Bottles
POWER GENERATION:
Two (2) each Caterpillar Model: C-15 Four (4) Caterpillar SR4 generators (455 KW each)
POWER DISTRUBUTION:
MCC House
WATER TANK:
One (1) each 491 barrels
FUEL TANK:
One (1) each 233 barrels
TUBULAR HANDLING:
One (1) 45 ft catwalk One (1) National SSW 30 Pipe Spinner
DRILL STRING:
Drill pipe: 10,000 ft 4 ½” S-135 Drill collars: (24) Each 6 ½” Drill collars: (4) Each 8” Heavy weight: (15) Joints 4 ½” HWDP
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
(2) Side door casing elevator 250 Ton
INSTRUMENTATION:
Weight indicator: AOI Stroke counter, RPM for RT, pressure gauges Rotary RPM counter and pumps stroke counter
SKIDDING PACKAGE:
N/A
RIG CAMP:
N/A
MAIN CAMP:
N/A
MATERIAL HANDLING:
N/A
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 22 of 84
RIG # 107 550 HP HELI-PORTABLE MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 23 of 84
RIG TYPE:
Heli-Portable 550 HP Mechanical Drilling Rig. CIL-650-HT Drilling Rig.
RIG MAKE:
CARE Industries (2009)
DRAWWORKS:
CARE Industries Model CIL-650
AUXILIARY BRAKE:
YES
MAST:
CARE Industries 112 ft. x 300,000 Telescoping Double
SUBSTRUCTURE:
CARE Industries Telescoping 16 ft. Substructure with 250,000 setback
TRAVELLING BLOCK:
McKISSICK 150 Ton
SWIVEL:
TSM 150
TOP DRIVE:
N/A
ROTARY TABLE:
17 ½” Hacker
MUD PUMPS:
Tree (3) model: TT-680 triplex pump – TULSA TRIPLEX Tree (3) 'DETROIT DIESEL Series 60 Drive Engines
MUD SYSTEM:
600 Barrel system 30 Barrel Trip tank 50 Barrel Pill tank Five (5) 7 HP agitators
SOLIDS CONTROL:
Two (2) Mini Cobra Shale Shakers One (1) Brandt Mini Cobra 3 Panel mud cleaner
CENTRIFUGAL PUMPS:
Five (5) NOV 6X5X11 Tree (3) NOV 8X6X11 Two (2) NOV 3X2X13
BOP EQUIPMENT:
One (1) Shafer 11” x 5000, Annular (2) Each 11” x 5000 Single Gate Shafer LXT SGL One (1) 2” x 5000 psi HCR valve (choke side)
CHOKE MANIFOLD:
Tree (3) 3-1/8” x 5,000 psi manual gate valves Eight (8) 2-1/16” x 5,000 psi manual gate valves One (1) OCO hydraulic choke valve: 3 1/16”” x 5,000 psi
BOP CLOSING UNIT:
OCO Type 80 12 x 11 Gallon Bottles
POWER GENERATION:
Six (6) JOHN DEERE Model: 6090HF485 Six (6) ONSITE ENERGY 250RJC6DT3 generators (220 KW each)
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
POWER DISTRUBUTION:
MCC House
WATER TANK:
Three (3) each 100 Barrel
FUEL TANK:
Tree (3)
TUBULAR HANDLING:
One (1) catwalk
DRILL STRING:
Drill pipe: 8,000 ft. of 4” Drill collars: (20) each 6 ½” Heavy weight: (25) each 4” Kelly: 37 ft
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
N/A
SKIDDING PACKAGE:
N/A
RIG CAMP:
Yes
MAIN CAMP:
Yes
MATERIAL HANDLING:
Two (2) each 211 Truck Model: AT-80
Page 24 of 84
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 25 of 84
RIG # 109 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 26 of 84
RIG TYPE:
Electric Cantilever Triple 1500 HP Drilling Rig
RIG MAKE:
Drilling Structures Inc.
DRAWWORKS:
National Model: 1320-UE
AUXILIARY BRAKE:
7838 El Mago Brake
MAST:
DSI 147 ft x 1,000,000 lbs Static Hook Load Capacity w/ 10 Lines
SUBSTRUCTURE:
DSI Swing Up Style (25’) Floor Height) Max. Set-back Load, (lbs.) Drillpipe: 800,000 lbs Max. Set-back Load, (lbs.) Casing 1,800,000 lbs
TRAVELLING BLOCK:
National Model: 650G500 - 500 ton Unitized Block/Hook
SWIVEL:
N/A
TOP DRIVE:
Canrig Model: 850ACc w/ 500 ton Load Capacity
ROTARY TABLE:
American Block 37 1/2"
MUD PUMPS:
Two (2) Gardner Denver Model: PZ-11 Triplex Pump Drive: Four (4) GE 752 Traction Motors (2) each pump
MUD SYSTEM:
Three (3) - Tank System with six compartments Active Capacity: Estimated at 1,500 bbls Nine (9) Derrick DE-AG-H Agitators
SOLIDS CONTROL:
Three (3) Derrick Model: FLC-504 Linear Motion Shale One (1) Derrick 3 Panel mud cleaner w/ Derrick FLC-504 Shaker
CENTRIFUGAL PUMPS:
(14) 6 x 8 x 14 Mission Magnum 75 HP
BOP EQUIPMENT:
One (1) 13⅝” x 5,000 psi Shaffer Annular One (1) 13⅝” x 10,000 psi Shaffer Double Gate One (1) 13 ⅝” x 10,000 psi Shaffer Single Gate
CHOKE MANIFOLD:
Nine (9) 2 1/16" and 4 1/16" 10K manual chokes One (1) Hydraulic choke valve
BOP CLOSING UNIT:
Valvcon-7 Station, 180 Gallon Accumulator
POWER GENERATION:
Three (3) Caterpillar Model: 3512-C Engines Three (3) Caterpillar SR4B (1225 KW each)
POWER DISTRUBUTION:
IDM - 4 Bay SCR System
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 27 of 84
WATER TANK:
500 bbls - Independent Water Tank
FUEL TANK:
Two (2) DSI 12000 GAL
TUBULAR HANDLING:
One (1) power catwalk One (1) Iron Roughneck Blohm Voss GF1100
DRILL STRING:
Drill pipe: 16,000 ft of 5” x 19.5lb/ft - S-135 Drill collars: (21) Joints 6½” x 4½”- NC46 Drill collars: (6) Joints 8” x 6⅝”- Reg. Spiral Heavy weight: (30) Joints 5” x NC46 - Slick
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Drilling Recorder - Pason Rental electronic package Pump Stroke Counter – Pason Rental electronic package PVT system – Pason Rental electronic package
SKIDDING PACKAGE:
N/A
RIG CAMP:
Yes
MAIN CAMP:
Yes
MATERIAL HANDLING:
Hyundai HL-757-7
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 28 of 84
RIG #110 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 29 of 84
RIG TYPE:
1500 HP Electric Drilling Rig - SCR Drive Cantilever Triple
RIG MAKE:
DSI (2010)
DRAWWORKS:
Gardner Denver Model 1100 E
AUXILIARY BRAKE:
Elmago 7040
MAST:
DSI 147’ x 1,000,000 lb. static hookload w/ 12 lines
SUBSTRUCTURE:
DSI – Swing-up (30’ floor height) Rotary capacity-1,000,000 lb.; setback capacity-650,000 lb.
TRAVELLING BLOCK:
National model 650G500 - 500 ton unitized block/hook
SWIVEL:
Incorporated in top drive
TOP DRIVE:
Canrig: 8050AC – 800 HP (500 ton) Drill torque: 37,000 ft. lb.; max make up torque: 51,000 ft. lb.
ROTARY TABLE:
27½” model: RT-275 - 500 ton
MUD PUMPS:
One (1) model: JF-1600 triplex pump (1,600 HP) – Oklahoma Rig Fabricators Two (2) 752 traction motors One (1) model: JF-1600 triplex pump (1,600 HP) – Oklahoma Rig Fabricators Two (2) 752 traction motors
MUD SYSTEM:
3 tank system with complete roof system Active system: 1500 bbl. Three (3) 15 HP agitators Four (4) 10 HP agitators One (1) Swaco vacuum degasser – 1200GPM
SOLIDS CONTROL:
Two (2) Swaco Mongoose shale shakers One (1) Swaco 3/1 mud cleaner – 16 cone desilter, 2 cone desander with Mongoose shaker
CENTRIFUGAL PUMPS:
Four (4) Harrisburg – 5x6 c/w 100 HP motors – 2 mix hoppers Two (2) Harrisburg– 6x8 c/w 100 HP motors – mud cleaner
BOP EQUIPMENT:
One (1) 13⅝” x 5,000 psi Hydril (GL) annular One (1) 13⅝” x 10,000 psi Cameron double gate One (1) 13⅝” x 10,000 psi Cameron single gate Two (2) 3-1/16” x 10,000 psi manual gate valves (kill side) One (1) 3-1/16” x 10,000 psi manual gate valve (choke side) One (1) 3-1/16” x 10,000 psi HCR gate valve (choke side)
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 30 of 84
CHOKE MANIFOLD:
Three (3) 3-1/16” x 10,000 psi manual gate valves Seven (7) 3-1/16” x 10,000 psi manual gate valves One (1) manual choke valve: 2-9/16” x 10,000 psi One (1) Swaco hydraulic choke valve: 2-9/16” x 10,000 psi
BOP CLOSING UNIT:
Consolidated pressure – 6 station, 240 gallon
POWER GENERATION:
Four (4) Caterpillar 3512B (1480 HP each) Four (4) Caterpillar generators (1225 KW each)
POWER DISTRUBUTION:
Ross Hill SCR – 4 x 4
WATER TANK:
500 bbl. independent tank Two (2) 3x2 Mission magnum pumps
FUEL TANK:
Two (2) 12,000 gallon tanks Two (2) fuel pumps and filtration system
TUBULAR HANDLING:
One (1) powered catwalk (hands free) Four (8) sets pipe racks One (1) Iron Roughneck (2-7/8” – 8-1/2”)
DRILL STRING:
Drill pipe: 16,000 feet of 5” x 19.5 lb./ft. – S-135 (4½” IF) Drill collars: (30) joints 6½” x 4½” XH Drill collars: (8) joints 8-1/4” x 6⅝”- reg. spiral Heavy weight: (30) joints 5” x 4½” IF
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for , 13-3/8”, 9-5/8”, 7”, 5-1/2”,5” Single joints elevators for 13-3/8”, 9-5/8”, 7”, 5-1/2”, 5” Rotary casing slips for 13-3/8”, 9-5/8”, 7”, 5 ½”, 5”
INSTRUMENTATION:
Weight indicator: Totco Stroke counter, RPM for RT, pressure gauges Rotary RPM counter and pumps stroke counter Digital drilling recorder, includes: hookload, rotary RPM, rotary torque, drilling rate, pump pressure, pump strokes 5 point intercom system: co. man trailer, toolpusher trailer, driller, mud tank
SKIDDING PACKAGE:
DSI - Skidding System 5’ High Walking System
RIG CAMP:
One (1) One (1) One (1) One (1)
MAIN CAMP:
90 Persons complete camp
MATERIAL HANDLING:
Hyundai 757 - FORKLIFT 10,000 lb. capacity
Company Man Unit – Office/Bedroom Rig Manager Unit – Office/Bedroom HSE/ Medic Unit Bathroom /Shower Unit
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 31 of 84
RIG # 111 665 HP MECHANICAL MOBILE DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 32 of 84
RIG TYPE:
Carrier Mounted Telescopic Mechanical Drilling / Heavy Workover – Double
RIG MAKE:
Care Industries
DRAWWORKS:
ALCO 700DD (665 HP) 42” x 10” and 38” x 8” Drum Sizes Drive: Detroit 6063-HV39
AUXILIARY BRAKE:
Yes
MAST:
Care Industries 400,000 pounds
SUBSTRUCTURE:
Care Industries – 16’ floor Height Set back Capacity – 350,000 Lbs
TRAVELLING BLOCK:
McKissick Tools 868 Block Sheave Number, Size
SWIVEL:
TSM 200
TOP DRIVE:
N/A
ROTARY TABLE:
Hacker 17 ½” – 300 Ton
MUD PUMPS:
One (1) Gardner Denver PZ-7 One (1) Gardner Denver PZ-8 Drive: Two (2) Detroit Diesel Series 60 (1) each pump
MUD SYSTEM:
Three (3) - Tank System Active Capacity: Estimated at 1,200 bbls Four (4) Brandt 7.5 and 5 HP Agitators
SOLIDS CONTROL:
Two (2) King Cobra 3 panel Shaker One (1) PSI Max 2000 Degasser One (1) MiSwaco DESANDER 2-12 Desander One (1) MiSwaco 6T4 Desilter
CENTRIFUGAL PUMPS:
(5) Badger 6x5x14
BOP EQUIPMENT:
One (1) 11” x 5,000 psi Shaffer (GK) Annular One (1) 11” x 5,000 psi Shaffer (LWS) Double Gate One (1) HCR Valve 3 1/8”
CHOKE MANIFOLD:
(9) 2 1/16" 5K (2) 3 1/8" 5K manual chokes One (1) Hydraulic choke valve 2x3
BOP CLOSING UNIT:
OCO 5 station, 3000 PSI, 120 Gallon 12 Bottles (10 gallon bottles)
Telescopic Double – 116 feet Static Hook load Capacity
5 x 36"
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 33 of 84
POWER GENERATION:
Two (2) Detroit Diesel Model: Series 60 Two (2) Onsite Energy (340 KW each)
POWER DISTRUBUTION:
MCC House
WATER TANK:
4500 Gal - Independent Water Tank
FUEL TANK:
1500 Gal – Independent Fuel tank
TUBULAR HANDLING:
One (1) catwalk One (1) Pipe Spinner Cons Energy service 700-80H-3
DRILL STRING:
Drill pipe: 8000 ft 3 ½” S – 135 Drill collars: (12) each 6 ½” Heavy weight: (15) each 3 ½”
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
(6) Casing Elevators 150 Ton
INSTRUMENTATION:
MD Totco Digital Instrumentation
SKIDDING PACKAGE:
N/A
RIG CAMP:
N/A
MAIN CAMP:
N/A
MATERIAL HANDLING:
N/A
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 34 of 84
RIG #118 1000 HP MECHANICAL MOBILE DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 35 of 84
RIG TYPE:
1000 Series Mobile Drilling Rig
RIG MAKE:
Loadcraft Manufactured (2009)
DRAWWORKS:
Loadcraft LCI-1000
AUXILIARY BRAKE:
Industrial and Marine Power Systems Aux Hydraulic Brake
MAST:
Loadcraft 114 ft x 410,000 lbs w /10 Lines (1 1/8”)
SUBSTRUCTURE:
Loadcraft Hydraulic Telescoping Substructure 16 ft.
TRAVELLING BLOCK:
American Block 200 Ton D30E200
SWIVEL:
N/A
TOP DRIVE:
Warrior Model: 250H14HR Hydraulic (250 Ton)
ROTARY TABLE:
Hacker 22”
MUD PUMPS:
Two (2) National Oilwell 9P- 100 Triplex One (1) Gardner-Denver PZG7 Triplex Drive: Two (2) MTU Detroit 12V2000S12 One (1) Caterpillar C-15
MUD SYSTEM:
Three (2) Loadcraft Tank systems One (1) Hercules Tank System With Roof system Active system: 1000 BBLs One (1) Loadcraft Trip Tank 55 BBLs Eight (8) Brandt 5 HP Agitators
SOLIDS CONTROL:
One (2) Linear Shaker King Cobra One (1) Brandt Mud Cleaner w/ 3-Panel Shaker One (1) Swaco Compact D-Gasser
CENTRIFUGAL PUMPS:
Fourteen (14) Badger and NOV – 6x5x11
BOP EQUIPMENT:
One (1) 1 Control Flow 11 x 5000 Annular One (1) 11” x 5,000 psi Shaffer LXT double gate One (1) 3-1/8” x 5,000 psi HCR gate valve (choke side)
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 36 of 84
CHOKE MANIFOLD:
Twelve (12) 2 1/16" and 3 1/8 x 5,000 psi manual gate valves One (1) Swaco hydraulic choke valve: 2-1/16” x 5,000 psi
BOP CLOSING UNIT:
OCO– 5 station, Type 80 (12) bottles 10 gal
POWER GENERATION:
Two (2) each Detroit 12 V 2000
POWER DISTRUBUTION:
MCC House
WATER TANK:
One (1) 450 bbl CARE Ind.
FUEL TANK:
One (1) 1600 gallon tank.
TUBULAR HANDLING:
One (1) Catwalk
DRILL STRING:
Drill pipe: 10,000 ft 4 ½” S-135 Drill collars: (24) Each 6 ½” Drill collars: (4) Each 8” Drill Collars Heavy weight: (15) Joints 4 ½”
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Warrior Integrated Drilling Console
SKIDDING PACKAGE:
N/A
RIG CAMP:
N/A
MAIN CAMP:
N/A
MATERIAL HANDLING:
N/A
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 37 of 84
RIG #119 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 38 of 84
RIG TYPE:
Electric Cantilever Triple (1500 HP)
RIG MAKE:
DRILLING STRUCTURE INTERNATIONAL
DRAWWORKS:
National Oilwell 1320UE 1500 HP (2) GE752AC Drive
AUXILIARY BRAKE:
El Magco Water Cooled 7838W
MAST:
Drilling Structure International 147’ X 1,00,000 Lbs. Static Hook Load w/ 12 lines Adjustable Stabing Board Decard Model “C” Hoist
SUBSTRUCTURE:
Drilling Structure International (25’ floor height) Rotary Capacity-1,000,000 Lbs.; Setback Capacity-800,000 Lbs. BOP handling system
TRAVELLING BLOCK:
American Block 500 Tons Six 60” Sheaves
SWIVEL:
N/A
TOP DRIVE:
Canrig Model 8050AC-17-C Sten Speed Max Continuous 15 900ft-Lb (57 100 Nm) @ 265 RPM General Electric Motor (GE B20 AC)
ROTARY TABLE:
37 ½” American Block: 500 ton
MUD PUMPS:
Two (2) Gardner Denver PZL 11 (200 HP))
MUD SYSTEM:
Four (4) Tank System Complete Roof System Active system: 1,620 BBLs Nine (9) 10 HP Agitators
SOLIDS CONTROL:
Four (4) Derrick Corporation Shakers Model FLC-503 One (1) 3/1 Derrick Corporation Model FLC-503 with One (1) Desilter, One (1) Desander One (1) Vacuum Degasser (1200 GPM)
CENTRIFUGAL PUMPS:
Three (3) Mission 2500 Supreme – 3x2x13 c/w 75 HP motors Six (6) Derrick Equipment 250– 6x8x11 c/w 100 HP motors Two Derrick Mud Hoppers
BOP EQUIPMENT:
One (1) 13⅝” x 10,000 psi Hydril Model (GK) Annular One (1) 13⅝” x 10,000 psi Hydril Type X Single One (1) 13⅝” x 10,000 psi Hydril Type X Doble One (1) HCR Valve 4 1/16" 10K
CHOKE MANIFOLD:
Two (2) Doyles manual gate valves: 4-1/16” x 10,000 psi Seven (7) Doyles manual gate valves: 2-1/16” x 10,000 psi One (1) Doyles Type Hydraulic Super Choke valve: 2 9/16” x 10,000 psi
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 39 of 84
BOP CLOSING UNIT:
OCO Pressure Control – 7 station, 204 gallon , 24 Btls 3000 PSI
POWER GENERATION:
Three (3) Caterpillar Model 3512 Three (3) Caterpillar SR4B (1225 KW)
POWER DISTRIBUTION:
Complete AC Ross Hill (SCR House)
WATER TANK:
One (1) 500 BBLs tank
FUEL TANK:
Two (2) DSI 12,000 Gallon tank ea
TUBULAR HANDLING:
Six (6) Sets Pipe Racks One (1) Set HT-100 manual tongs One (1) power catwalk
DRILL STRING:
(504) DP 5" RNG 2 (30) HWDP 5" (9) DC 4 3/4 THREAD NC 38 - 3-½ IF (12) DC 6 1/2 THREAD NC 46 - 4-½ XH (18) DC 6 1/2 THREAD 4-½ IF
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Kinetic Energy Management System Weight Indicator: Atlas Type “EB” Stroke Counter, RPM for RT Pressure Gauges Rotary RPM counter and pumps stroke counter Digital Drilling Recorder: includes: Hook load, rotary RPM, Rotary torque, Drilling rate, Pump pressure, Pump SPM Active tanks mud levels w/ alarm system 5 point intercom system: CO/man trailer, Toolpusher trailer, Driller, Mud Tank
SKIDDING PACKAGE:
Gatewood Fluid Power Hydraulic/Electrical System Drag Chain System
RIG CAMP:
N/A
MAIN CAMP:
N/A
MATERIAL HANDLING:
N/A
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 40 of 84
RIG #C01 2000 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 41 of 84
RIG TYPE:
2000 HP Electric Land and Desert Transportable Drilling Rig Land rig - triple
RIG MAKE:
Cooper Industries (2009)
DRAWWORKS:
Cooper CM-2000 E with Disc Brakes
AUXILIARY BRAKE:
Gulf Coast Baylor 7040
MAST:
Cooper EZ Lift Catilever 152 ft mast / 1,000,000 lbs Hoisting Capacity with 12 Lines
SUBSTRUCTURE:
Cooper Industries EZ Lift Self elevating 30 ft high Rotary capacity : 1,000,000 lbs Set back capacity: 600,000 lbs
TRAVELLING BLOCK:
Woolslayer Company Inc 500 TON 6 x 52" / Groove 1-3/8"
SWIVEL:
N/A
TOP DRIVE:
Canrig
805AC-712
ROTARY TABLE:
Dreco
37 1/2"
MUD PUMPS:
Two (2) Dreco 12T-1600 One (1) Gardner-Denver PZ 11 Triplex Drive: Four (4) OEM 752KC Traction Motor (2) Each Pump One (1) Caterpillar 3516
MUD SYSTEM:
2500 Barrels Mud System 100 Barrel Trip Tank capacity. Fifteen (15) Derrick 5 HP Agitators
SOLIDS CONTROL:
Three (3) Shale shakers Derrick Model FLC-503. One (1) Mud Cleaner 3x1 Derrick FLC 2000 w/ 2x10" Desander & 16x5" Desilter One (1) Derrick Vacc Flow 1000 Degaser
CENTRIFUGAL PUMPS:
Fifteen (15) Halco – 3x2x13
BOP EQUIPMENT:
One (1) 13" 5/8 - 5,000psi Hydril GK Annular Preventor One (1) 13" 5/8 - 5,000psi Cameron Type U double rams B.O.P. One (1) 13" 5/8 - 5,000psi Cameron Type U single rams B.O.P. One (1) 3-1/8” x 5,000 psi HCR gate valve (choke side)
CHOKE MANIFOLD:
Twelve (12) 2 1/16" and 3 1/8 x 5,000 psi manual gate valves One (1) Super Choke: 3-1/8” x 5,000 psi
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 42 of 84
BOP CLOSING UNIT:
Dreco Unit / 24 each 32 gallon Bottles / 2 x 40 hp Triplex pumps / 3 Pnewmatic air pumps
POWER GENERATION:
Four (4) Caterpillar 3512 engines (1476 hp) Four (4) Generator KATO Model (1750 KVA)
POWER DISTRUBUTION:
Carrel SCR Control House OEM - 4 x 5 Bay (1400 A each).
WATER TANK:
Two Water Tanks - Total Capacity: 1000 Barrels.
FUEL TANK:
Two Fuel Tanks - Total Capacity: 1000 Barrels.
TUBULAR HANDLING:
One (1) Catwalk One (1) Varco AR 3000 Auto Iron Roughneck One (1) Varco TW 61 Iron Roughneck 63,000 lb/ft Make up Torque & 75,000 lb/ft Break out
DRILL STRING:
16,000 feet of 5" Drill Pipe Grade S 135 / 19.5 lbs/ft / NC-50 Connection 30 Joints of 5" HWT Drill Pipe / NC-50 Connections 20 each 8" OD Spiral Drill Collars 20 each 6-1/2" OD Spiral Drill Collars 25 each 4-3/4" OD Spiral Drill Collars
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Canrig K-Box System ( Optional )
SKIDDING PACKAGE:
N/A
RIG CAMP:
Yes
MAIN CAMP:
Main camp : 82 beds Mini camp : 6 beds
MATERIAL HANDLING:
Manitou 6.5 Ton lift Capacity
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 43 of 84
RIG #C08 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 44 of 84
RIG TYPE:
1500 HP Electric Land Transportable Drilling Rig Land rig - triple
RIG MAKE:
Lee-C-Moore
DRAWWORKS:
Ideco 900-E
AUXILIARY BRAKE:
Baylor
MAST:
Lee-C-Moore - Cantilever 142ft x 775,000lbs with 12 Lines
SUBSTRUCTURE:
Lee-C-Moore X 27ft Floor Hieght W/ Veristic Walking System ( 4 each 300 Ton lifting Ram ) Rotary capacity : 750,000lbs Set back capacity: 400,000lbs Pony Subs (5 ft)
TRAVELLING BLOCK:
McKissick 550 Ton 6 x 52" Groove 1-3/8"
SWIVEL:
N/A
TOP DRIVE:
Canrig 500 Ton Model 1250-AC 1150HP 54,000lb Continuous Drilling Torque
ROTARY TABLE:
National 27-1/2" GE-752 Traction Motor
MUD PUMPS:
Two (2) GD PZ-11 Triplex Pumps Four (4) GE-752 Traction Motors (2) Each Pump
( Upgraded in 2010 ) 6032
One (1) GD PZ-11 Triplex Pump One (1) Cat 3516 Engine MUD SYSTEM:
1500Bbl Capacity 100Bbl Trip Tank capacity Seven (7) Max 2000 Agitators
SOLIDS CONTROL:
Four (4) Shale shakers Derrick Model FLC-503. One (1) Mud Cleaner 3x1 Derrick FLC-503 w/ 2x10" Desander & 16x5" Desilter One (1) Degaser
CENTRIFUGAL PUMPS:
Ten (10) Baker – 4x3x13
BOP EQUIPMENT:
One (1) 13"-5/8 x 5,000psi Hydril GK Annular One (1) 13"-5/8 x 5,000psi Cameron Type U double rams B.O.P. One (1) 13"-5/8 x 5,000psi Cameron Type U single rams B.O.P. One (1) 3-1/8” x 5,000 psi HCR gate valve (choke side)
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 45 of 84
CHOKE MANIFOLD:
Ten (10) 3 1/8 x 5,000 psi manual gate valves One (1) Super Choke: 3-1/8” x 5,000 psi
BOP CLOSING UNIT:
Type 80 x 12ea 15 gallon Bottles 1 x 30HP Triplex pumps 2 Air Pumps
POWER GENERATION:
Four (4) Cat D-399 (1200HP) Four (4) ea Generator General Electric (930 KW) One (1) Cat 3512 engines (1200 HP) One (1) ea Generator General Electric (930 KW) for Top Drive Two (2) Perkins 1300 Series for Main Camp Two (2) Olympian GEH220 Generator (220 Kva) each
POWER DISTRUBUTION:
IEC SCR - 3 x 4 bays
WATER TANK:
Two (2) Water Tanks - Total Capacity: 1000 Barrels.
FUEL TANK:
Two (2) Fuel Tanks - Total Capacity: 1000Bbl
TUBULAR HANDLING:
One (1) Catwalk One (1) Canrig Torq-Matic Model TM-120 x 90,000lb/ft Make Up & 120,000lb/ft Break-out
DRILL STRING:
14,000Ft x 5" DP S135 x 19.5lbs NC-50 Connections (30) x 5" HWDP NC-50 Connections (15) x 8" DC (10) x 6-1/2” DC (12) x 4-3/4" DC
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Canrig K-Box System ( Optional )
SKIDDING PACKAGE:
Veristic Manufacturing Rig Walking Systems ( Optional )
RIG CAMP:
Yes
MAIN CAMP:
Main camp : 82 beds Mini camp : 6 beds
MATERIAL HANDLING:
Komatsu Model WA-380 x 5Ton Capacity
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 46 of 84
RIG #C12 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 47 of 84
RIG TYPE:
1500 HP Electric Land Transportable Drilling Rig Land rig - triple
RIG MAKE:
Dreco Industries
DRAWWORKS:
National 110 UE
AUXILIARY BRAKE:
Baylor
MAST:
Dreco Beam Leg Cantilever 142ft mast x 770,000lbs with 12 Lines
SUBSTRUCTURE:
Dreco Sling Shot x 25ft Floor Height w/ Veristic Walking System (4 each 300Ton lifting Ram) Rotary capacity : 750,000lbs Set back capacity: 600,000lbs Pony Sub 5 Ft
TRAVELLING BLOCK:
Continental Emsco x 500Ton 6 x 50" Groove 1-3/8"
SWIVEL:
N/A
TOP DRIVE:
Canrig 8050AC-712
ROTARY TABLE:
National Model C-275 x 27-1/2" GE-752 Traction Motor
MUD PUMPS:
Two (2) GD PZ-11 Triplex Pumps Four (4) GE-752 Traction Motors (2) Each Pump
ECB-6032
One (1) GD PZ-11 Triplex Pump One (1) Cat 3516 Engine MUD SYSTEM:
1600Bbl Capacity 100Bbl Trip Tank capacity Seven (7) Derrick Agitators
SOLIDS CONTROL:
Four (4) Shale shakers Derrick Model FLC-503. One (1) Mud Cleaner 3x1 Derrick FLC-503 w/ 2x10" Desander & 16x5" Desilter One (1) Degaser
CENTRIFUGAL PUMPS:
Thirteen (13) National – 6x5x11
BOP EQUIPMENT:
One (1) 13"-5/8 x 5,000psi Hydril GK Annular One (1) 13"-5/8 x 5,000psi Cameron Type U double rams B.O.P. One (1) 13"-5/8 x 5,000psi Cameron Type U single rams B.O.P. One (1) 3-1/8” x 5,000 psi HCR gate valve (choke side)
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 48 of 84
CHOKE MANIFOLD:
Seven (7) 2 1/16 x 5,000 psi, (1) 3 1/16 x 5K manual gate valves
BOP CLOSING UNIT:
Type 80 x 20ea 11 gallon Bottles 1 x 30HP Triplex pumps 2 Air Pumps
POWER GENERATION:
Four (4) Cat D-399 (1200HP) Four (4) ea Generator General Electric (930 KW) Two (2) Cat 3406 for Main Camp Two (2) Stamford Generator (220 Kva) each
POWER DISTRUBUTION:
Ross Hill Model 1400 - 4 x 4 bay SCR
WATER TANK:
Two (2) Water Tanks - Total Capacity: 1000 Barrels.
FUEL TANK:
Four (4) Fuel Tanks - Total Capacity: 1500Bbl
TUBULAR HANDLING:
One (1) Catwalk One (1) Varco Model TW-61 X 63,000lb/ft Make-Up & 75,000 lb/ft Break-Out
DRILL STRING:
14,600Ft x 5" DP S135 x 19.5lbs NC-50 Connections (30) x 5" HWDP NC-50 Connections (10) x 8" DC (15) x 6-1/2” DC (12) x 4-3/4" DC
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
N/A
INSTRUMENTATION:
Canrig K-Box System ( Optional )
SKIDDING PACKAGE:
Veristic Manufacturing Rig Walking Systems ( Optional )
RIG CAMP:
Yes
MAIN CAMP:
Main camp : 82 beds Mini camp : 6 beds
MATERIAL HANDLING:
Volvo Model L90-D x 5Ton Capacity
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 49 of 84
RIG #C14 2500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 50 of 84
RIG TYPE:
2500 HP Electric Land Transportable Drilling Rig Land rig - triple
RIG MAKE:
Branham Industries
DRAWWORKS:
National Oilwell E-2000 up graded to 2500 hp in 2011
AUXILIARY BRAKE:
National Oilwell Varco Elmagco
MAST:
Branham - Cantilever 177ft mast x 1,250,000lbs w/ 14 Lines
SUBSTRUCTURE:
Branham x 28ft Floor Height Rotary capacity : 1,000,000lbs Set back capacity: 800,000bs
TRAVELLING BLOCK:
Canrig Short Block x 750 Ton - 7 x 60" Groove 1-1/2"
SWIVEL:
N/A
TOP DRIVE:
Canrig x 750 Ton Model 1275-AC 1400HP x 71,500 lb/ft Intermittent Drilling Torque
ROTARY TABLE:
Dreco 37-5 x 37-1/2" - GE-752 Traction Motor
MUD PUMPS:
Two (2) National 12P-160 Triplex Pumps Four (4) GE-752 Traction Motors (2) Each Pump
MUD SYSTEM:
2,600Bbl Mud System 100Bbl Trip Tank capacity. Twenty one (21) Derrick Agitators
7838W
SOLIDS CONTROL:
Four (4) Shale Shakers Derrick Model 626 with Scalper System incorporated. One (1) Mud Cleaner 3x1 Derrick FLC 2000 w/ 2x10" Desander & 16x5" Desilter One (1) Derrick Vacu-Flo 1200 Degasser
CENTRIFUGAL PUMPS:
Thirteen (13) National – 6x5x11
BOP EQUIPMENT:
One (1) 13"-5/8 x 5,000psi Hydril GK Annular One (1) 29-1/2" Stewart & Stevenson Diverter System One (1) 20-3/4" x 3,000psi Cameron Type U BOP Stack with Shaffer Annular One (1) 13" 5/8 x 10,000psi Cameron Type U BOP Stack One (1) 3-1/16” x 10,000 psi HCR gate valve (choke side)
CHOKE MANIFOLD:
Nine (9) 3-1/16" x 10,000 psi Manual Valves
BOP CLOSING UNIT:
Koomey Type 80 / 24 ea 11 gallon Bottles / 1 x 30 hp Triplex pumps / 2 Pnewmatic air pumps
Case 14-10193-KG
POWER GENERATION:
Doc 267-6
Filed 04/09/14
Page 51 of 84
Five (5) Cat D-399 (1200HP) Five (5) ea Generator General Electric (930 KW) Two (2) Cat 3406 for Main Camp Two (2 Cat LC6 Generator (220 Kva) each
POWER DISTRUBUTION:
Siemens - 5 x 5 bay SCR House
WATER TANK:
Three (3) Water Tanks
FUEL TANK:
Six (6) Fuel Tanks
TUBULAR HANDLING:
One (1) Catwalk One (1) Canrig Torq-Matic Model TM-120 x 90,000lb/ft Make-Uup Torque & 120,000lb/ft Break-Out
DRILL STRING:
16,700ft x 5-7/8" DP Grade V-150 x / 26.30lbs/ft TT 585 Connection x Range 3 (65) Jts x 5-7/8" Spiral HWDP x 57.30 lbs/ft TT 585 Connection / Range 2 3,000ft x 4" DP Grade V-150 x 14.00 lbs/ft TT 390 Connection / Range 2 (50) Jts x 4" Spiral HWDP x 23.48 lbs/ft TT 390 Connection / Range 2 (9) x 9-1/2" OD Spiral DC (15) x 8" OD Spiral DC (24) x 6-1/2" OD Spiral DC (24) x 4-3/4" OD Spiral DC
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
One (1) Varco / Pnewmatic 500 ton Slip Type Elevators 7" / 9-5/8" / 13-3/8"
INSTRUMENTATION:
Canrig K-Box System ( Optional )
SKIDDING PACKAGE:
N/A
RIG CAMP:
Yes
MAIN CAMP:
Main camp : 90 beds Mini camp : 6 beds
MATERIAL HANDLING:
Cat Model 950-G x 5 Ton Capacity
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 52 of 84
RIG #C15 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 53 of 84
RIG TYPE:
1500 HP Diesel Electric Land Transportable Drilling Rig Land rig - triple
RIG MAKE:
DSI Build in 2007
DRAWWORKS:
Davis D 1500 1500 hp Two DC Traction Motors Model GE-752 1250 Hp each
AUXILIARY BRAKE:
ELMAGCO 6032
MAST:
DSI - Catilever 142 ft mast / 700,000 lbs Hoisting Capacity with 12 Lines
SUBSTRUCTURE:
DSI Structures / 22 ft high Rotary capacity : 700,000 lbs Set back capacity: 400,000 lbs
TRAVELLING BLOCK:
McKissick Block / 500 Ton / 6 x 50" / Groove 1-1/4"
SWIVEL:
N/A
TOP DRIVE:
Canrig x 750 Ton Model 1275-AC 1400HP x 71,500 lb/ft Intermittent Drilling Torque
ROTARY TABLE:
National
MUD PUMPS:
Three (3) Ideco T-1300 Triplex Mud Pumps Four (6) GE-752 Traction Motors (2) Each Pump
MUD SYSTEM:
1500 Barrels Mud System 100Bbl Trip Tank capacity. Eight (8) Derrick Agitators
/ 27-1/2" Opening - Driven by GE-752 Traction Motor
SOLIDS CONTROL:
Three (3) Shale shakers Derrick Model FLC-503 One (1) Mud Cleaner 3x1 Derrick FLC 2000 w/ 2x10" Desander & 16x5" Desilter One (1) Derrick Vacu-Flo 1200 Degasser
CENTRIFUGAL PUMPS:
Twelve (12) National and Derrick – 6x5x11 and 3x2x13
BOP EQUIPMENT:
One (1) 13"-5/8 x 5,000psi Hydril GK Annular One (1) 13" 5/8 x 10,000psi Cameron DoubleType U Ram One (1) 3-1/8” x 5,000 psi HCR gate valve (choke side)
CHOKE MANIFOLD:
Three (3) 3-1/8" x 5,000 psi and Six (6) 2 1/16” 5K Manual Valves
BOP CLOSING UNIT:
OCO Type 80 / 24 ea 11 gallon Bottles / 1 x 30 hp Triplex pumps / 2 Pnewmatic air pumps
Case 14-10193-KG
POWER GENERATION:
Doc 267-6
Filed 04/09/14
Page 54 of 84
Three (3) Cat D-399 (1476HP) Three (3) Generator Kato SR-4 (1226 KW) One (1) Jhon Deere 4045TF150A Engine for top drive
POWER DISTRUBUTION:
Ross Hill Model 1400 - 4 x 4 bay SCR House
WATER TANK:
Two Water Tanks - Total Capacity: 1000 Barrels.
FUEL TANK:
Two Fuel Tanks - Total Capacity: 1000 Barrels.
TUBULAR HANDLING:
One (1) Catwalk One (1) Varco SW-40 Spinning Wrench
DRILL STRING:
8,500 feet of 5" Drill Pipe Grade S 135 / 19.5 lbs/ft / NC-50 Connections 5,000 feet of 5" Drill Pipe Grade G-105 / 19.5 lbs/ft / NC-50 Connections 30 Joints of 5" HWT Drill Pipe / NC-50 Connections & 15 each 3-1/2" HWT with NC-38 Conn. 9 each 8" OD Spiral Drill Collars 15 each 6-1/2" OD Spiral Drill Collars 12 each 4-3/4" OD Spiral Drill Collars
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Three (3) NOV Pick up Four (4) NOV Elevatotors 150T and 250T
INSTRUMENTATION:
Canrig K-Box System ( Optional )
SKIDDING PACKAGE:
N/A
RIG CAMP:
Yes
MAIN CAMP:
Main camp : 74 beds Mini camp : 6 beds
MATERIAL HANDLING:
Caterpillar Model 950-F / 5 Ton lifting Capacity
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Rig Overview Brazil
Page 55 of 84
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 56 of 84
RIG #106 650HP CARRIER MOUNTED MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 57 of 84
RIG TYPE:
650 HP Carrier Mounted Telescopic Mechanical Drilling / Heavy Workover
RIG MAKE:
CARE Industries
DRAWWORKS:
ALCO 700DD (665 HP) 1 Detroit Diesel Series 60 (665 HP)
MAST:
Care Industries Telescopic Double – 116 feet Static Hook load Capacity 400,000 pounds
SUBSTRUCTURE:
Care Industries – 16’ floor Height Set back Capacity – 350,000 Lbs
TRAVELING BLOCK:
Mckissick 250 Ton (05 shaves of the 30”)
SWIVEL
ARTIC T-200
TOP DRIVE:
N/A
ROTARY TABLE:
Continental EMSCO of the 17 ½” – 300 Ton
MUD PUMPS:
One (1) Gardner Denver PZ-7
MUD SYSTEM:
One (2) Tank – 550 BBL
SOLIDS CONTROL:
One (1) 2 panel shaker
CENTRIFUGAL PUMP:
One (1) 5 x 6 c/w 60 HP Motor
BOP EQUIPMENT:
One (1) 11” x 5,000 psi Hydril (GK) Annular One (1) 11” x 5,000 psi Shaffer (LXT) Double Gate
CHOKE MANIFOLD:
3 1/16” x 5,000 psi Choke Manifold One (1) Hydraulic Super Choke
BOP CLOSING UNIT:
OCO 4 station, 3000 PSI, 110 Gallon 10 Bottles (11 gallon bottles)
POWER GENERATION:
Two (2) MTU – 227/440 V – 400 kW / 425 KVa
POWER DISTRIBUTION:
N/A
WATER TANK:
110 BBLs
FUEL TANK:
42 BBLs
TUBULAR HANDLING:
Catwalk, Pipe racks, V-door
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
DRILL STRING:
3420 ft 3 ½” S – 135 Drill Pipe 6800 ft 4 ½” G-105 Drill Pipe 2340 ft 4 ½” S-135 Drill Pipe 19 Each 4 3/4” Drill Collars 03 Each 6 ½” Drill Collars
HANDLING TOOLS:
As required by Operator
INSTRUMENTATION:
Payson System
SKIDDING PACKAGE:
N/A
RIG CAMP:
Four (4) Campers for offices
MAIN CAMP:
30 Main Camp
MATERIAL HANDLING:
N/A
Page 58 of 84
1/24/2013
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 59 of 84
RIG #115 HELI-TRANSPORTABLE 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 60 of 84
RIG TYPE:
AC VFD Drive Self Erecting Drilling System Triple
RIG MAKE:
IDE 1500 Heli-Transportable Electric Rig (2010)
DRAWWORKS:
1500 HP AC Drive
AUXILIARY BRAKE:
Disc brakes
MAST:
IDE Manufacturing 142’ x 750,000 Lbs Static Hook Load w/ 12 lines
SUBSTRUCTURE:
IDE BOX on BOX ( 25’ floor height ) Rotary Capacity-750,000 Lbs; Setback Capacity-450,000 Lbs BOP handling system
TRAVELLING BLOCK:
Warrior, Split 350 Ton
SWIVEL:
Integrated in Top Drive
TOP DRIVE:
Warrior Model: 350 (350 Ton) Drill Torque: 36,700 ft/lbs; Make up Torque: 45,000 ft/lbs
ROTARY TABLE:
27 ½” American Block: 500 ton
MUD PUMPS:
Three (3) American Block P-800 ( 800 HP ) Three (3) 800 HP AC Drive Motor
MUD SYSTEM:
12 tank system Complete Roof System Active system: 1000 BBLs Eight (8) 10 HP Agitators One (1) Vacuum Degasser (1200 GPM)
SOLIDS CONTROL:
Three (3) Swaco Linear Shakers Swaco 3 /1 with One (1) Desilter, One (1) Desander One (1) Swaco Centrifuge
CENTRIFUGAL PUMPS:
Two (2) Mission Magnums – 5x6 c/w 75 HP motors – 2 mix hoppers Three (3) Mission Magnums – 6x8 c/w 75 HP motors – Mud cleaner, Degasser
BOP EQUIPMENT:
One (1) 13⅝” x 5000 psi Shafer type(GL) Annular Three (3) 13⅝” x 5000 psi Cameron Type 82 Double Gate Two (2) 3-1/8” x 5000 psi manual gate valves (Kill Side) One (1) 3-1/8” x 5000 psi manual gate valve (Choke Side) One (1) 3-1/8” x 5000 psi HCR gate valve (Choke Side)
CHOKE MANIFOLD:
3-1/8” x 5000 psi manual gate valves Two (2) manual choke valve: 2-1/16” x 5000 psi One (1) Swaco Type Hydraulic Choke valve: 3 1/8” x 5000 psi
BOP CLOSING UNIT:
OCO Pressure Control – 6 station, 220 gallon
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 61 of 84
POWER GENERATION:
Eight (8) Perkins 2800 series ( 800 HP each) Eight (8) WEG Generators (455 KW each)
POWER DISTRIBUTION:
Complete “IEC” AC – VFD drive
WATER TANK:
Three ( 3 ) 5000 gallon tanks
FUEL TANK:
Four ( 4 ) 4000 gallon tanks
TUBULAR HANDLING:
Six ( 6 ) Sets Pipe Racks One ( 1) Set HT-100 manual tongs One (1) Iron Roughneck B&V
DRILL STRING:
Drill Pipe: 16,000 feet of 5” x 19.5 lb/ft – S-135 ( 4 ½ IF ) Drill Pipe: 13,000 feet of 3 1/2” x 13.3 lb/ft – S-135 ( 3 ½ IF ) Heviwate: (50) Joints 5” x 4 ½ IF Heviwate: (50) Joints 3 1/2” x 3 ½ IF Drill Collars: (21) Joints 8” x 6 5/8 R-Spiral Drill Collars: (30) Joints 6 1/2” x 4 1/2” XH-Spiral Drill Collars: (21) Joints 4 3/4” x 3½” IF-Spiral Drill Collars: (12) Joints 3 1/2” x 2 3/8 IF-Slick
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for 20”, 13-3/8”, 9-5/8”, 7”, 5-1/2”,5”
Single joints elevators for 20”,13-3/8”, 9-5/8”, 7”, 5-1/2”,5” Rotary casing slips for 13-3/8”, 9-5/8”, 7”, 5 ½”, 5” 350 TON, air operated elevator and slips for 13-3/8”, 9-5/8”, 7”, 5 ½”, 5” INSTRUMENTATION:
Kinetic Energy Management System Weight Indicator: Martin DECKER Stroke Counter, RPM for RT Pressure Gauges Rotary RPM counter and pumps Stroke counter Digital Drilling Recorder: includes: Hook load, rotary RPM, Rotary torque, Drilling rate, Pump pressure, Pump SPM Active tanks mud levels w/ alarm system 5 point intercom system: CO/man trailer, Toolpusher trailer, Driller, Mud Tank, Sub, 4 point Video Camera System
SKIDDING PACKAGE:
NA
RIG CAMP:
As required by Operator
MAIN CAMP:
100 Man Camp
MATERIAL HANDLING:
2- All track with Atlas 7 ton hydraulic knuckle booms 2 – Komatsu D39 Bulldozers with 8 ton boom cranes
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 62 of 84
RIG #116 HELI-TRANSPORTABLE 1500 HP ELECTRIC DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 63 of 84
RIG TYPE:
AC VFD Drive Self Erecting Drilling System Triple
RIG MAKE:
IDE 1500 Heli-Transportable Electric Rig ( 2010 )
DRAWWORKS:
1500 HP AC Drive
AUXILIARY BRAKE:
Disc brakes
MAST:
IDE Manufacturing 142’ x 750,000 Lbs Static Hook Load w/ 12 lines
SUBSTRUCTURE:
IDE BOX on BOX ( 25’ floor height ) Rotary Capacity-750,000 Lbs; Setback Capacity-450,000 Lbs BOP handling system
TRAVELLING BLOCK:
Warrior, Split 350 Ton
SWIVEL:
Integrated in Top Drive
TOP DRIVE:
Warrior Model: 350 (350 Ton) Drill Torque: 36,700 ft/lbs; Make up Torque: 45,000 ft/lbs
ROTARY TABLE:
27 ½” American Block: 500 ton
MUD PUMPS:
Three (3) American Block P-800 ( 800 HP ) Three (3) 800 HP AC Drive Motor
MUD SYSTEM:
12 tank system Complete Roof System Active system: 1000 BBLs Eight (8) 10 HP Agitators One (1) Vacuum Degasser (1200 GPM)
SOLIDS CONTROL:
Three (3) Swaco Linear Shakers Swaco 3 /1 with One (1) Desilter, One (1) Desander One (1) Swaco Centrifuge
CENTRIFUGAL PUMPS:
Two (2) Mission Magnums – 5x6 c/w 75 HP motors – 2 mix hoppers Three (3) Mission Magnums – 6x8 c/w 75 HP motors – Mud cleaner, Degasser
BOP EQUIPMENT:
One (1) 13⅝” x 5000 psi Shafer type(GL) Annular Three (3) 13⅝” x 5000 psi Cameron Type 82 Double Gate Two (2) 3-1/8” x 5000 psi manual gate valves (Kill Side) One (1) 3-1/8” x 5000 psi manual gate valve (Choke Side) One (1) 3-1/8” x 5000 psi HCR gate valve (Choke Side)
CHOKE MANIFOLD:
3-1/8” x 5000 psi manual gate valves Two (2) manual choke valve: 2-1/16” x 5000 psi One (1) Swaco Type Hydraulic Choke valve: 3 1/8” x 5000 psi
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 64 of 84
BOP CLOSING UNIT:
OCO Pressure Control – 6 station, 220 gallon
POWER GENERATION:
Eight (8) Perkins 2800 series ( 800 HP each) Eight (8) WEG Generators (455 KW each)
POWER DISTRUBUTION:
Complete “IEC” AC – VFD drive
WATER TANK:
Three ( 3 ) 5000 gallon tanks
FUEL TANK:
Four ( 4 ) 4000 gallon tanks
TUBULAR HANDLING:
Six ( 6 ) Sets Pipe Racks One ( 1) Set HT-100 manual tongs One (1) Iron Roughneck B&V
DRILL STRING:
Drill Pipe: 16,000 feet of 5” x 19.5 lb/ft – S-135 ( 4 ½ IF ) Drill Pipe: 13,000 feet of 3 1/2” x 13.3 lb/ft – S-135 ( 3 ½ IF ) Heviwate: (50) Joints 5” x 4 ½ IF Heviwate: (50) Joints 3 1/2” x 3 ½ IF Drill Collars: (21) Joints 8” x 6 5/8 R-Spiral Drill Collars: (30) Joints 6 1/2” x 4 1/2” XH-Spiral Drill Collars: (21) Joints 4 3/4” x 3½” IF-Spiral Drill Collars: (12) Joints 3 1/2” x 2 3/8 IF-Slick
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for 20”, 13-3/8”, 9-5/8”, 7”, 5-1/2”,5” Single joints elevators for 20”,13-3/8”, 9-5/8”, 7”, 5-1/2”,5” Rotary casing slips for 13-3/8”, 9-5/8”, 7”, 5 ½”, 5” 350 TON, air operated elevator and slips for 13-3/8”, 9-5/8”, 7”, 5 ½”, 5”
INSTRUMENTATION:
Kinetic Energy Management System Weight Indicator: Martin DECKER Stroke Counter, RPM for RT, Pressure Gauges, Rotary RPM counter and pumps Stroke counter Digital Drilling Recorder,includes: Hook load, rotary RPM, Rotary torque, Drilling rate, Pump pressure, Pump SPM Active tanks mud levels w/ alarm system 5 point intercom system: CO/man trailer, Toolpusher trailer, Driller, Mud Tank, Sub, 4 point Video Camera System
SKIDDING PACKAGE:
NA
RIG CAMP:
As required by Operator
MAIN CAMP:
100 Man Camp
MATERIAL HANDLING:
2- All track with Atlas 7 ton hydraulic knuckle booms 2 – Komatsu D39 Bulldozers with 8 ton boom cranes
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 65 of 84
RIG #120 850HP PAD MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 66 of 84
RIG TYPE:
850 HP Telescopic Double Mechanical Drilling Rig
RIG MAKE:
Care Industries (2011)
DRAWWORKS:
TSM - 850
AUXILIARY BRAKE:
Eaton 324 brake complete w/ cooling package
MAST:
Care Industries 105’ x 440,000 lb. static hook load w/ 8 lines
SUBSTRUCTURE:
Care Industries- (18’ floor height) Rotary capacity-440,000 lb.; setback capacity-350,000 lb. BOP handling system
TRAVELLING BLOCK:
Warrior – 250 ton
SWIVEL:
NA
TOP DRIVE:
Warrior model 250 hydraulic (250 ton) Drill torque: 25,000 ft. lb.
ROTARY TABLE:
27½” Hacker 500 ton
MUD PUMPS:
Weatherford MP- 10 (1000 HP)
Detroit – 12V2000 Weatherford MP- 10 (1000 HP)
Detroit – 12V2000 MUD SYSTEM:
2 tank system with complete roof system Active system: 900 bbl. Five (5) 7.5 HP agitators
SOLIDS CONTROL:
One (1) linear shaker (King Cobra) One (1) King Cobra mud cleaner
CENTRIFUGAL PUMPS:
Two (2) Badger centrifugal – 5x6x14 c/w 50 HP motors – 2 mix hoppers Two (2) Badger centrifugal – 6x8x14 c/w 75 HP motors – mud cleaner
BOP EQUIPMENT:
One (1) 11” x 5000 psi Hydril annular One (1) 11” x 5000 psi Shaffer double gate Two (2) 2-1/16” x 5000 psi manual gate valves (kill side) One (1) 3-1/8” x 5000 psi manual gate valve (choke side) One (1) 3-1/8” x 5000 psi HCR gate valve (choke side)
CHOKE MANIFOLD:
Five (5) 3-1/8” x 5000 psi manual gate valves Eight (8) 2-1/16” x 5000 psi manual gate valves One (1) manual choke valve: 2-1/16” x 5000 psi One (1) MI Swaco hydraulic choke valve: 2-1/16” x 5000 psi
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 67 of 84
BOP CLOSING UNIT:
OCO – 5 station, 120 gallon
POWER GENERATION:
Two (2) Detroit Diesel 60 Series (600 HP each) Two (2) Magna Max generators (450 KW each)
WATER TANK:
430 bbl. independent tank Two (2) 3x2x11 Mud Hog centrifugal
FUEL TANK:
430 bbl. independent tank Two (2) fuel pumps and filtration system
TUBULAR HANDLING:
Six (6) pipe tubs – 2 hydraulic operated One (1) powered catwalk (hands free) Four (4) sets pipe racks
DRILL STRING:
Drill pipe: 10,000 feet of 5” x 19.5 lb./ft. – S-135 (4 ½” IF) Drill collars: 18 joints 6½” x 4½” IF Drill collars: 8 joints 8” x 6⅝” reg. Heavy weight: (40) joints 5” x 4 ½” IF
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for 13-3/8”, 9-5/8”, 7”, 5” Single joints elevators for 13-3/8”, 9-5/8”, 7”, 5” Rotary casing slips for 13-3/8”, 9-5/8”, 7”, 5”
INSTRUMENTATION:
Weight Indicator: Martin DECKER Stroke Counter, RPM for RT, pressure gauges Rotary RPM counter and pumps stroke counter Digital drilling recorder, includes: hook load, rotary RPM, rotary torque, drilling rate, pump pressure, pump strokes 5 point intercom system: co. man trailer, tool pusher trailer, driller, mud tank
SKIDDING PACKAGE:
Skidding package to skid rig 150 feet Skidding system can go forward to back and side to side
RIG CAMP:
(1) Company Man Unit – Office/Bedroom (1) Rig Manager Unit – Office/Bedroom (1) HSE/ Medic Unit (1) Bathroom /Shower Unit
MAIN CAMP:
NA
FORKLIFT:
NA
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 68 of 84
RIG #122 550HP CARRIER MOUNTED MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 69 of 84
RIG TYPE:
550 HP CARRIER MOUNTED MECHANICAL DRILLING RIG
RIG MAKE:
COOPER LTO 550 (*Refurbished in 2006 & 2012)
DRAWWORKS:
COOPER - 550 HP – MODEL 4214 e 4208 (Sandline)
MAST
COOPER TELESCOPIC - 110 FT - 250.000 LBS HOOK LOAD CAPACITY
SUBSTRUCTURE
16’ DRILLING STRUCTURES INTERNACIONAL INC - 350.000 LBS AND 300.000 LBS SETBACK CAPACITY
TRAVELING BLOCK:
1 (ONE) McKISSICK, 125 TON CAPACITY (FOUR SHAVES OD 36” X 1”)
SWIVEL:
1 (ONE) GARDNER DENVER SW 125 TON CAPACITY
TOP DRIVE:
N/A
ROTARY TABLE:
1 (ONE) IDECO TYPE 230 - 23” - 300 TON CAPACITY
MUD PUMPS:
02 OPI 350 HP – ENGINE DETROIT DIESEL 8V71 01 T-100 – 1000 HP – IDECO – ENGINE CAT 399
MUD SYSTEM:
2 (TWO) 500 BBL MUD TANKS (ACTIVE)
SOLIDS CONTROL:
2 (TWO) LINEAR SHAKERS KEM-THON – TYPE DUAL TANDEN – PROCESS 800 GPM 1 (ONE) MUD CLEANER 3X1 – KEM-THON – PROCESS 500 GPM 1 (ONE) ODRILL MCM, 400GPM CAPACITY HYDRAULIC MIXER
CENTRIFUGAL PUMP:
2 (TWO) SUPERCHARGE CENTRIFUGAL PUMPS (MUD PUMP) 2 (TWO) SUPERCHARGE CENTRIFUGAL PUMPS (SYSTEM)
BOP EQUIPMENT:
1 (ONE) 13 5/8" X 3.000 PSI ANNULAR PREVENTOR 2 (TWO) 13 5/8" X 3.000 PSI RAM PREVENTORS 1 (ONE) 2" WKM KILL LINE 1 (ONE) 3 1/8" WKM CHOKE LINE
CHOKE MANIFOLD:
1 (ONE) 2-1/16", 5.000PSI WKM CHOKE MANIFOLD
BOP CLOSING UNIT:
O&C, 5 (FIVE) STATIONS, 12 (TWELVE) BOTTLES
POWER GENERATION:
2 (TWO) MARATHON MODEL 680FDF - 325 kW/ CATERPILLAR ENGINE 3412
POWER DISTRIBUTION:
N/A
INSTRUMENTATION:
MARTIN DECKER DRILLING PARAMETER INDICATOR FIVE STAR WIRE LINE UNIT
WATER TANK:
1 (ONE) 250 BBLS
FUEL TANK:
210 BBLS
Case 14-10193-KG
DRILL STRING:
Doc 267-6
Filed 04/09/14
Page 70 of 84
Drill pipe: 6500 feet of 4 ½” x 16.6 lb/ft –G-105 (4 ½” XH) Drill collars: 16 joints 6½” x 4½” IF Drill collars: 6 joints 7 ¾” x 6⅝” reg. Heavy weight: 20 joints 5” x 4 ½” IF
TUBULAR HANDLING:
Four (4) pipe tubs One (1) catwalk (hands free) Four (4) sets pipe racks
CASING HANDLING TOOLS:
Side door casing elevator for 13-3/8”, 9-5/8”, 7”, 5” Single joints elevators for 13-3/8”, 9-5/8”, 7”, 5” Spider casing for 13-3/8”, 9-5/8”, 7”, 5”
INSTRUMENTATION:
PAYSON SYSTEM
SKIDDING PACKAGE:
NA
RIG CAMP:
(1) Company Man Unit – Office/Bedroom (1) Rig Manager Unit – Office/Bedroom (1) HSE/ Medic Unit (3) Bathroom /Shower Unit
MAIN CAMP:
NA
MATERIAL HANDLING:
NO 3/25/2013
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 71 of 84
RIG #125 1200HP MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 72 of 84
RIG TYPE:
1200 HP Mechanical Drilling Rig
RIG MAKE:
IRI Cabot (*Refurbished in 2012)
DRAWWORKS:
CABOT 1200 MOBILE DRILLING RIG Powered by two (2) Caterpillar 3412, 450 HP each, 1,800 RPM
MAST:
Drilling Structure Intl Inc., 131' free standing vertical - 750,000 Lbs
SUBSTRUCTURE:
DSII - Rotary Capacity- 750,000 Lbs; Setback Capacity - 300,000 Lbs
TRAVELING BLOCK:
Ideco UTB-360-5-50 - 360 Ton
SWIVEL:
Gardner Denver, 300 Ton
TOP DRIVE:
N/A
ROTARY TABLE:
Mid Continental 27 1/2 B - 360 Ton
MUD PUMPS:
Two (2) Gardner Denver PZ-10 Hydril K20 Pulsation Dampeners with DEMCO 3" Relief Valves Powered by CAT D399
MUD SYSTEM:
Two (3) IAA 1000 BBL Mud Tanks.
SOLIDS CONTROL:
Two (2) MI Swaco - Moongose Line Cleaners ( Shale Shakers ) 1200 GPM One (1) MI Swaco Mud Degasser Poorboy powered by 6 HP motor – 500 GPM
One (1) MI Swaco Mud Cleaner 3x1 – Meerkat 1000 GPM Capacity Mud Cleaner CENTRIFUGAL PUMP:
2 (TWO) HARRISBURG SUPERCHARGE CENTRIFUGAL PUMPS
BOP EQUIPMENT:
One (1) 13 5/8"x 5.000 psi Shaffer Spherical Annular Two (2) 13 5/8" x 5.000 psi Shaffer LXT Ram Preventor double One (1) Swaco Panel + Super Choke One (1) Atmospheric separator
CHOKE MANIFOLD:
One (1) 2 1/16" x 5.000 psi WKM Choke Manifold
BOP CLOSING UNIT:
Koomey, Type 80 with 4 stations and 12 bottles
POWER GENERATION:
Two (2) Caterpillar 3412 SR4B - 545 KVa
POWER DISTRIBUTION:
CCM Distribution
INSTRUMENTATION:
1 (ONE) PASON DRILLING RECORDER 1 (ONE) MARTIN DECKER INDICATOR
WATER TANK:
1 (ONE) 350 BBLs
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 73 of 84
FUEL TANK:
400 BBLS
DRILL STRING:
Drill pipe: 10,000 feet of 5” x 19.5 lb./ft. – S-135 (4 ½” IF) Drill collars: 15 joints 6½” x 4½” IF Drill collars: 12 joints 8” x 6⅝” reg. Heavy weight: 15 joints 5” x 4 ½” IF
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for 13-3/8”, 9-5/8”, 7”, 5” Single joints elevators for 13-3/8”, 9-5/8”, 7”, 5” Spider casing for 13-3/8”, 9-5/8”, 7”, 5”
INSTRUMENTATION:
Payson System
SKIDDING PACKAGE:
NA
RIG CAMP:
NA
MAIN CAMP:
NA
MATERIAL HANDLING:
NA
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 74 of 84
RIG #126 750HP CARRIER MOUNTED MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 75 of 84
RIG TYPE:
750 HP CARRIER MOUNTED MECHANICAL DRILLING RIG
RIG MAKE:
IRI CABOT (*Refurbished in 2011)
DRAWWORKS:
INGERSOL RAND 750 HP - 19 5/8" X 40" DRUM
MAST:
CABOT IRI - 117 FT. TELESCOPIC, 300,000 LB HOOK LOAD CAPACITY
SUBSTRUCTURE:
INGERSOL RAND - SELF ELEVATING 350,000 LBS ROTARY & 200.000 LBS SETBACK CAPACITY
TRAVELING BLOCK:
1 (ONE) BJ UNIMATIC, 150 TON CAPACITY
SWIVEL:
1 (ONE) EMSCO, 300 TON CAPACITY
TOP DRIVE:
N/A
ROTARY TABLE:
1 (ONE) NATIONAL, 27 1/2", 350 TON CAPACITY
MUD PUMPS:
2 (Two) Weatherford MP- 10 (1000 HP) Cat 3508
MUD SYSTEM:
2 (TWO) 350 BBL MUD TANKS
SOLIDS CONTROL:
1 (ONE) 4 1/2", 5.000 PSI HIGH PRESSURE LINE 1 (ONE) POORBOY & 1 (ONE) DEMCO DEGASSER 1 (ONE) DEMCO, 400GPM CAPACITY HYDRAULIC MIXER
CENTRIFUGAL PUMP:
MISSION MAGNUM
BOP EQUIPMENT:
1 (ONE) 13.5/8", 5.000 PSI ANNULAR PREVENTOR 1 (ONE) 13.5/8", 5.000 PSI RAM PREVENTOR DOUBLE 1 (ONE) 2 1/16" WKM KILL LINE 1 (ONE) 3 1/8" WKM CHOKE LINE
CHOKE MANIFOLD:
1 (ONE) 2-1/16", 5.000PSI WKM CHOKE MANIFOLD
BOP CLOSING UNIT
KOOMEY, 4 (FOUR) STATIONS, 12 (TWELVE) BOTTLES
POWER GENERATION:
2 (TWO) CAT 681 KVA 1800 RPM CATERPILLAR 3412
POWER DISTRIBUTION:
N/A
INSTRUMENTATION:
Payson System
WATER TANK:
30 CUBIC MTS
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 76 of 84
FUEL TANK:
2 (TWO) Each 90 BBLS
DRILL STRING:
Drill pipe: 8,200 feet of 5” – 19,5 lb. / ft. – G-105 (4.1/2”IF) Heavy Weight: 20 joints 5” x 4.1/2” IF Drill collars: 12 joints 6 ¾” x 6.5/8” reg. Drill Collars: 04 joints 7 ¾” x 6.5/8”reg.
HANDLING TOOLS:
As required for drill string
CASING HANDLING TOOLS:
Side door casing elevator for 13-3/8”, 9-5/8”, 7”, 5” Single joints elevators for 13-3/8”, 9-5/8”, 7”, 5” Rotary casing slips for 13-3/8”, 9-5/8”, 7”, 5”
INSTRUMENTATION:
Payson System
SKIDDING PACKAGE:
NA
RIG CAMP:
One (1) Dedicated Rig Manage (Office/Bedroom) / Eventual Customer (Office/Bedroom) One (1) Laboratory Fluid /Chemical customer (Office/Bedroom) / Dedicated Fiscal (Office/Bedroom) One (1) Confined Team (Bedroom- Electrician, Mechanic and Welder) / Telecommunication/HSE Office One (1) Eventual Customer One (1) Refectory One (1) W.C. Collective and Cloakroom *All trailer above are 40ft
MAIN CAMP:
NA
MATERIAL HANDLING:
As required on a project by project basis 3/25/2013
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 77 of 84
RIG #127 750HP CARRIER MOUNTED MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 78 of 84
RIG TYPE:
XJ750 Mechanical Drilling/ Heavy Workover Rig
MAKE:
SJ Petroleum Machinery Co.
DRAWWORKS:
Drawworks model JC450-S (385 HP) Caterpillar C11 (385 HP)
MAST:
SJ Petroleum Machinery Co . 34m Static Hook load Capacity 150 Ton
SUBSTRUCTURE:
SJ Petroleum Machinery Co – 4,5m Height of drill floor Max Load 150 Ton
TRAVELING BLOCK:
Traveling Block MCKISSICK/Model 867/ Max Load 150 Ton
SWIVEL:
125 Ton
TOP DRIVE:
N/A
ROTARY TABLE:
ZP205 20 ½” – 300 Ton / 300 rpm
MUD PUMPS:
Two (2) MP-10 Weatherford
MUD SYSTEM:
2 Tank – 694 BBLS
SOLIDS CONTROL:
Two (2) Single Meerkat PT One (1) Sheeker with Hidrocyclon (disiliter + desander) – MI SWACO
CENTRIFUGAL PUMP:
Six (6) 5 x 6 x 11 MCM model 250 eletrical engine 50HP Four (4) 3 x 4 x 10 MCM model 178 eletrical engine 25HP
BOP EQUIPMENT:
One (1) 13 5/8’’ x 3,000 psi Shaffer - Annular One (1) 13 5/8” x 3,000 psi Shaffer - Double Gate One (1) HCR
CHOKE MANIFOLD:
2 1/16” x 3,000 psi Choke Manifold One (1) Swaco Hydraulic Choke
BOP CLOSING UNIT:
TYPE ‘ 80 MFD BY. Koomey Inc.
POWER GENERATION:
One (1) Caterpillar C18 – 573 kW One (1) Caterpillar C15 (475HP) – 320 kW
POWER DISTRIBUTION:
Genesys Automatizacion y Control
INSTRUMENTATION:
RIG SENSE
WATER TANK:
190 BBLs
FUEL TANK:
180 BBLs
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 79 of 84
DRILL STRING:
2000m 5’’ S – 210 Drill Pipes range II 20 Each 5’’ HWDP 20 Each 6 ¾’’ Drill Collars 06 Each 7 ¾’’ Drill Collars 04 Each 9 ½’’ Drill Collars
HANDLING TOOLS:
As required on a project by project basis
CASING HANDLING TOOLS:
As required on a project by project basis
SKIDDING PACKAGE:
NA
RIG CAMP:
One (1) Dedicated Rig Manager One (1) Dedicated fiscal (customer) One (1) Dedicated cloakroom team One (1) Dedicated bathroom team One (1) Dedicated dormitory/office chemical One (1) Dedicated dormitory geologist One (1) Dedicated laboratory geologist One (1) Dedicated dormitory eventual (customer) One (1) Dedicated dormitory confined team One (1) Dedicated telecommunication One (1) Dedicated dining hall One (1) Dedicated warehouse
MAIN CAMP:
As required on a project by project basis
MATERIAL HANDLING:
As required on a project by project basis
1/24/2013
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 80 of 84
RIG #128 1000HP CARRIER MOUNTED MECHANICAL DRILLING RIG
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
Page 81 of 84
RIG TYPE:
1000 HP CARRIER MOUNTED MECHANICAL DRILLING RIG
RIG MAKE:
LOADCRAFT HRI - 1000 HP
DRAWWORKS:
HRI 800-42/12 Two engines Caterpillar C-15 (540HP) with Two (2)allinson S6610 transmission
MAST:
HRI – Heartland Rig – 122 feet Capacity 400,000 lbs
SUBSTRUCTURE:
HRI – Heartland Rig S-HRI 700-18 Telescopict Set back Capacity –150 Ton / Rotary Beam Capacity 200 ton
TRAVELING BLOCK:
American Block ABCO -200-5-30 (Cap 200Tn)
SWIVEL:
1 (ONE) KING OIL TOOL, 25MB - 300 TON CAPACITY
TOP DRIVE:
N/A
ROTARY TABLE:
1 (ONE) HACKER, 27 1/2", 300 TON CAPACITY
MUD PUMPS:
2 (TWO) ELLIS WILLIAMS 1100 HP CAT 3508 ENGINES 7" X 10" LINERS
MUD SYSTEM:
2 (TWO) 500 BBL MUD TANKS
SOLIDS CONTROL:
Two (2) Single Meerkat PT / One (1) shaker with Hidrocyclone ( D-silter – DSander) – MI SWACO
CENTRIFUGAL PUMP:
(06 ) Model 250 – 5 x 6 x 11 With 50 HP electric engine (04) Model 178 – 3 x 4 x 10 With 25 HP electric engine
BOP EQUIPMENT:
One (1) 13 5/8” x 5,000 psi Annular Chuch One (1) 13 5/8” x 5,000 psi Double Gate Chuch Type U One (1) HCR 4 1/16”
CHOKE MANIFOLD:
3 1/8” x 5,000 psi Choke Manifold One (1) Hydraulic Super Choke
BOP CLOSING UNIT:
TYPE ‘ 80 MFD BY. Koomey Inc.
POWER GENERATION:
One (1) 320 KWA –Engine C 15 / One (1) 575 KWA – Engine C-18
POWER DISTRIBUTION:
N/A
INSTRUMENTATION:
Digital Instrumetation Rig Sense
WATER TANK:
1 (ONE) 500 BBL
Case 14-10193-KG
Doc 267-6
Filed 04/09/14
FUEL TANK:
180 BBLs
DRILL STRING:
3000 mts 5” – 19,5 lb / ft G Drill Pipe 40 Each 5” HWDP 12 Each 6 ¾” Drill Collars 09 Each 7 ¾” Drill Collars 03 Each 9” Drill collars
HANDLING TOOLS:
As required on a project by project basis
CASING HANDLING TOOLS:
As required on a project by project basis.
INSTRUMENTATION:
Rig Sense
SKIDDING PACKAGE:
NA
RIG CAMP:
One (1) Dedicated Rig Manage One (1) Dedicated Fiscal / Chemical customer One (1) Laboratory Fluid / Telecomunication One (1) Eventual Customer One (1) Confined Team One (1)Refectory One (1)W.C. Collective and Cloakroom
MAIN CAMP:
NA
MATERIAL HANDLING:
As required on a project by project basis
Page 82 of 84
1/24/2013
14-10193-KG Doc 267-6 Filed 04/09/14 Project Arno Case – Tuscany International Drilling Inc.
Page 83 of 84
Company Overview
Tuscany International Drilling Inc. (―Tuscany‖ or the ―Company‖) (TSX:TID) is an international provider of contract drilling and work-over services to the oil and gas industry in South America —
Tuscany currently operates 26 rigs across its three geographies, and comprises an aggregate ~20% of all the working rigs in those regions combined (based on Baker Hughes 5/2013 rig count) —
Headquartered in Calgary, Canada, the Company currently operates in Colombia, Ecuador and Brazil and employs ~1,200
Colombia
― Ecuador
― Brazil
Incorporated in 2004, Tuscany’s goal has been to take advantage of its local presence and deep knowledge in the drilling and work-over industry to be a premiere provider of these services to the emerging E&P industry in South America
Situation Overview
Beginning in late 2012, the Company began to experience liquidity and cash flow challenges, due in large part to lower than anticipated rig utilization, non-payment by certain customers on large overdue accounts and certain underperforming acquisitions
Beginning in May 2013, the Company executed a number of strategic reorganizations and sales to increase profitability and operational efficiency, dispose of certain non-profitable operations and generally allow for a quick reorganizational process post-petition —
Consolidation of the Company’s two Colombian entities into one, streamlined operations
—
Disposition of the Company’s unprofitable African operations (Caroil SAS), and certain equipment in Colombia, to Etablissements Maurel & Prom
As of February 2014, the Company’s overall utilization rate for its rigs was 60%, with 15 of 26 rigs currently operating
A drop in cash flow contributed to the declining financial health of the Company, leading to increased leverage under the Tuscany’s pre-petition credit agreement
On February 2, 2014 the Company’s holding company and U.S. domiciled entities filed voluntary petitions for Chapter 11 relief in the U.S. Bankruptcy Court (Delaware #14-10193)
Process Overview GMP is soliciting bids for: — —
The Company or any of its regional operations as going concerns, or Any/all of the Company’s assets
On March 26, 2014, the U.S. Bankruptcy Court approved the final bidding procedures (―Bidding Procedures‖)
Qualified Bids (as described in the Bidding Procedures) are due by April 25, 2014
Parties unable to complete and place a Qualified Bid by the deadline are encouraged to submit a Bona Fide Offer (as defined in the Bidding Procedures) by no later April 25, 2014, and are strongly encouraged to submit such a Bona Fide Offer as soon as possible
All parties interesting in participating in this process should promptly contact GMP at the contact information disclosed below
Details on bidding procedures are available upon request David Abell Manging Director 212.692.5176
[email protected]
GMP Securities LLC Investment Banking 331 Madison Avenue New York, NY 10017
Andres Perez Associate 212.692.5116
[email protected]
14-10193-KG Doc 267-6 Filed 04/09/14 Project Arno Case – Tuscany International Drilling Inc. (Cont’d)Page 84 of 84 Colombia Operations
Headquarters located in Bogotá
Fleet comprised of 12 rigs, 8 of those rigs under contract - 4 under contract discussions
The Colombian operations currently employ approximately 700 people
Tuscany has recently undertaken significant operational restructuring initiatives to help streamline the operations
Ecuador Operations
Administrative headquarters in Quito
Fleet of 5 rigs, the Company currently has 3 of those rigs currently under contract – 2 under contract discussions
Currently employ approximately 220 people
The Company is currently undertaking certain organizational restructurings to facilitate the sale of Ecuador as a going concern
Brazil Operations
Operating as two subsidiaries, Tuscany International Drilling Inc. is based in Rio de Janeiro state, and Tuscany Perfurações Brasil Ltda. is based in the state of Bahia
Total of 7 rigs, the Company’s Brazilian operation currently has 2 of those rigs working, with the rest bidding
The Brazilian operations currently employ approximately 190 people
Assets - Rig Fleet Overview
Tuscany enjoys a very strong competitive position in its markets, where it operates over 20% of the working rigs in the region —
Known for its high-tech, newer drilling rigs
—
>90% of Company’s rigs are North American-built
—
Majority of rigs equipped with top drives and walking systems
Tuscany International Fleet <1,000 HP 1,200 HP 1,500 to 2,000 HP >2,000 HP Total
Total Rigs Colombia Ecuador 13 4 4 2 8 6 3 2 1 26 12 5
Details on the Company’s rigs are attached hereto
Assets – Other Select
In addition to traditional working capital assets such as accounts receivable, prospective purchasers will be able to evaluate the acquisition of the Company’s tax assets and interests in certain litigation claims David Abell Manging Director 212.692.5176
[email protected]
GMP Securities LLC Investment Banking 331 Madison Avenue New York, NY 10017
Andres Perez Associate 212.692.5116
[email protected]
Brazil 5 2 2 9
