Transcript
Economy Video Converters for Twisted Pair up to 500 m
TW-Tx and Rx(8)
TW-Tx
TW-Rx
TW-Rx8
▪ Tx - mini transmitters ▪ Rx - 1-channel receivers ▪ Rx8 - 8-channel receivers ▪ Frequency corrections ▪ Adjustable gain ▪ Working temperature from – 40°C to +70°C ▪ Suitable for indoor applications
ORDERING NAME
CODE
NOTE
TW-Tx
2-260-052
10-16VDC
TW-Rx8
2-260-053
10-30VDC/10-30VAC
TW-500
2-260-050
1x Tx + 1x Rx
TW-508
2-260-051
8x Tx + 1x Rx8
Small applications 0...500m
TW-Tx
TW-500-Rx
Video signal 1Vpp
Larger applications Video signal 1Vpp 0...500m
TW-Tx TW-Tx TW-Tx
Video signal 1Vpp
TW-Tx TW-Tx LEGEND
TW-Tx
UTP cable coax cable
www.metel.eu
TW-Tx
21/36 1/3
TW-Rx8
TW-Tx
Installation manual REV:201203
TW-500 a TW-508 Twist Set up to 500 m
TW-500 – Description and technical parameters TW-500 set is designed to transfer videosignal in indoor areas up to the distance of 0 to 500 m.*
Parametr
Value
Unit
Video input
0.5 – 2
Vpp
Bandwidth
10
MHz
Gain range
-10…+10
dB
Correction
-12…+8
dB/7MHz
Supply
10 – 16
VDC
Overvoltage protection
fine
transils
Operational range
-40...+70
ºC
Humidity
max. 95
%
Tx
32 x 43 x 22
mm
Rx
42 x 48 x 22
mm
typ. 0.15
kg
Dimensions
Weight (in total)
The producer retains the right to change any technical parameters without previous announcement.
TW-508 - Description and technical parameters TW-508 set is designed to transfer videosignal from 8 cameras up to the distance of 0 to 500 m.*
Parametr
Value
Unit
Video input
0.5 – 2
Vpp
Bandwidth
10
MHz
Gain range
-10…+10
dB
-12…+8
dB/7MHz
10 – 16
VDC (20mA)
10 – 30*
VAC/DC
Correction Supply
TW-Tx
Supply
TW-Rx8
Overvoltage protection
transils
Operational range
-40...+70
ºC
Humidity
max. 95
%
32 x 43 x 22
mm
Dimensions
TW-Tx
Dimensions
TW-Rx8
19" / 1U / 22
mm
Weight
TW-Tx / TW-Rx8
0.04 / 0.39
kg
The producer retains the right to change any technical parameters without previous announcement.
* transmission over unshielded UTP cables
www.metel.eu
2/3
Installation manual REV:201203
TW-500 a TW-508 Twist Set up to 500 m
TW-500 Installation and Setting 1. 2. 3. 4. 5.
Transmitter TW-Tx is designed for installation to camera cover. Receiver TW-Rx is designed for mounting to flat surface. Connect supply and signal wires according to the picture below. Set the output level 1Vpp using the GAIN trimmer. Sharpen the picture using the HF trimmer. No further setting is necessary. 58mm (M3)
LED SUPPLY
TRIMMERS GAIN and CORRECTION
LED SUPPLY
max. 500m UTP cat 5
TW-508 Installation and Setting 1. 2. 3. 4. 5.
Transmitter TW-Tx is designed for installation to camera cover (8pcs in the set). Receiver TW-Rx8 is designed for installation to 19" stand. Connect supply and signal wires according to the picture below. Set the output level 1Vpp using the GAIN trimmer. Sharpen the picture using the HF trimmer. No further setting is necessary. Supply 11-30VDC-AC without BIAS Supply 12-16VDC with BIAS
HF
MIN
GND BIAS BAS + BAS -
MAX
max. 500m UTP cat 5
www.metel.eu
3/3
GAIN
MIN
OUT
MAX
