Transcript
ECRAFT SMART HOME Series
PART NO: ESH-HDMISP2 HDMI Video Distribution Splitter Amplifier
The ESH-HDMISP2 is a high quality HDMI distribution amplifier. The amplifier has 2 inputs and 2 outputs. Features: z Connects up to 2 HDMI displays at the same time from a digital video source. z 2 input selectable by front buttons (A/B). z A, B Input could be setup by auto jump or manual setting. z Support high resolution: 480i、480p、720p、1080i、1080p @24/50/60Hz z Bandwidth: 25-225Mhz, support up to 12-Bit deep color. z Support DTS-HD、Dolby True HD、LPCM 7.1 z Support HDCP 1.3a, HDCP compliant. Panel View: ESH-HDMISP2
Specification: ITEM NO.
ESH-HDMISP2
Resolution
480i/p、720p、1080i/p @24/50/60Hz
HDMI Connector A / B input Supports Bandwidth Supports Resolution Operation Temperature Storage Temperature Power Consumption Power Supply DIMENSIONS W x H x D mm Weight
Input: 2 port (HDMI Type A), Output: 2 port ( HDMI Type A) Button switch x 2 25-225Mhz, support up to 12-Bit deep color 480i,576i,480p,720p,1080i,1080p -10 ~45 -30 ~70 1500mA (Max) DC5V2AMP 167 x 96 x 40 (mm) 450 g
1. Connect HDMI source to HDMI splitter Input A or B input，Output 1~4 to monitor. 2. Output 1 as EDID Master Port. It is recommended that all HDMI equipment is connected first, then power on, it will auto copy Master Port EDID for HDMI source reference which takes around 10 seconds. 3. Input A, B by front button selection. 4. Input LED flash: no any signal detected. 5. Press A, B buttons together to activated/disabled auto jump function. 6. Auto Jump function ON: A, B Blue LED flash at same time. 7. Auto Jump function OFF: A, B Blue LED on at same time. LED Indication: POWER ON/OFF INPUT A INPUT B OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
Green Blue Blue Blue Blue Blue Blue
Remark： 1. There is some DVD equipment that still have +5V signal output under power off status, this will cause the auto jump function to become abnormal, please disable auto jump and setup by pressing A, B button to avoid any abnormal operation. 2. There is no memory function; it will revert back to factory default once power off. (Input A, auto jump function off)
Electrocraft H/O 1/36 Binney Road, Kings Park NSW 2148 T: 02 8811 5155 E:
[email protected] W: www.electrocraft.com.au
