Transcript
TWX7CS001 Contractor Saw Module Precision contractor saw module designed for use with the Workcentre TWX7, resulting in a full-featured saw table capable of professional results. Powerful 1800W motor and precision 254mm TCT blade. Accurate 86mm blade height adjustment and 0-45° bevel angle adjustment for performing complex bevel cuts. Protractor gauge and rip fence for performing rip cuts, cross cuts and mitre cuts. Dust extraction port located below the table surface for efficient, unobtrusive dust removal. Easy to assemble and configure and fully supported by optional accessories for extending functionality.
Model: Product: Brand: Region: Category: Sub Category: Version No: Version Date:
TWX7CS001 779754 TRITON Australia Workcentre Systems Series 2000 V.1.6 15/07/2016
Product Specification Product Weight Power Voltage No Load Speed Bevel Range Blade Diameter Blade Type Blade Kerf Bore Diameter Cut Capacity - Rip Cut Capacity - 45° Cut Capacity - 90° Dust Port Size What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box What's in the box Module Length Module Width Plate Width Profile Size 1 Profile Size 2 Scale Table Size Table Height Type of bevel
15.2kg 1800W 220-240V~50Hz 4500rpm 0-45° 254mm 40TCT ATB, AS1473.8-2007 COMPLIANT 2.6mm Blade - 30mm 775mm 59.5mm 86mm 64.5mm / 32.6mm 1 x Contractor Saw 1 x Dust port adaptor 1 x Push stick 1 x Push stick holder 1 x Mitre gauge 1 x Rip fence 1 x Rip fence arm 1 x Blade guard 1 x Riving knife 2 x Multi tool 1 x Manual 679mm 422mm 1.8mm Side Extension Support from Centre Line - 600mm Outfeed Support from Centre Line - 670mm Metric 851 x 650mm 900mm Right
01 02 03 04 05 06 07 08 09 10 11
Component Specification Cable Specification
H05-VVF x 3C
Document created from Powerbox.com - 28/11/2016
