Transcript
ITEM NO.
_______________________
TY2-72 TY2SYS-72
series series
heated display systems
HALO HEAT … a controlled, uniform heat source that gently holds and surrounds food for better appearance, taste, and longer holding life. l Holds and displays hot food fresh and moist for hours — without adding water. l Expandable system to meet your specific requirements. l Matches profile of leading refrigerated display case. l HOT DISPLAY CASE — Curved glass styling. TY2-72 — Displays hot food without condensation on glass. — Thermostatically controlled heat source radiates from the base of the display case in multiple heat zones. — Overhead light zones with shatterproof coated bulbs. — Holds a full range of standard (gastronorm) pan sizes, full-size or half-size sheet pans. — Tempered sliding glass doors reflect heat back into the products and mirror the display to enhance merchandising effect. l DECORATOR BASE — Standard black painted front and end panels. — Protected with a environmentally friendly bumper, made of 93% pre-consumer polycarbonate waste and is 100% recyclable. l SELF-SERVICE HOT DISPLAY TY2SYS-72 — Customer self-service opening is available on right side, left side, or across the full length of case. — Front mounted heat-guard provides customer protection. The display case is constructed of 18 gauge, stainless steel. A tempered glass front encloses the display case and can be lifted to a 90 degree angle for easy cleaning. Removable, sliding glass doors on the operator side are included. Sliding door tracks have a “ clean sweep ” cutout allowing for easy cleaning and crumb removal. Framed end glass with rubber gasket material protects glass edges from chipping and breakage. The base is divided into two (2) individually managed heat zones with each zone controlled by a separate thermostat with a range of 1 through 10 and heat-on indicator light. Overhead lights are controlled by ON/OFF switches in two (2) light zones. Two (2) 125V plug outlets are available as an option on 120/208-240V units only. Counter-top display cases include one set of 4" (102mm) legs. l
TY2-72 - 72" (1829mm) length TY2SYS-72* - 72" (1829mm) length, with base TY2-72/P - 72" (1829mm) length, 71-5/16" (1811mm) self-service opening across full length of case front TY2SYS-72/P* - 72" (1829mm) length, with base, 71-5/16" (1811mm) self-service opening across full length of case front TY2-72/PL - 72" (1829mm) length, 23-3/4" (603mm) self-service opening on left side of case front TY2SYS-72/PL* - 72" (1829mm) length, 23-3/4" (603mm) with base, self-service opening on left side of case front TY2-72/PR - 72" (1829mm) length, 23-3/4" (603mm) self-service opening on right side of case front TY2SYS-72/PR* - 72" (1829mm) length, with base, 23-3/4" (603mm) self-service opening on right side of case front
*The system base is not sold as a separate item. Order the full TY2SYS model to receive the base.
FACTORY INSTALLED OPTIONS
ANSI/NSF 4
• Electrical Choices 120/208-240V 230V 380-415V • End Glass Choices Clear Glass, standard Solar Bronze Glass, optional [5011901] T emperature Probe, optional [5004917]
• Panel Color Choices Black painted, standard 1" Black formica system end panel, optional [PE-26780] Stainless Steel Custom Color painted I ndependent Electrical Outlet, optional [5001781] T emperature Gauge, optional [GU-33384]
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com PRINTED IN U.S.A.
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
#55 - 04/14
52-3/16" (1325mm)
31-3/16" (792mm)
TY2-72 TY2SYS-72
64-7/8" (1647mm) 52-13/16" (1341mm)
64-7/8" (1647mm) 52-13/16" (1341mm)
48" (1219mm)
3-13/16" (96mm)
CORD LENGTH: 7' (2133mm)
39-3/8" (1000mm)
50" (1270mm)
3-13/16" (96mm) *Cord postion is from operator side
49-5/8" (1260mm)
41-7/16" (1053mm) 51-5/16" (1304mm) 72" (1829mm) SHOWN WITH STANDARD END PANELS
42-7/16" (1078mm) 52" (1322mm) ELECTRICAL PANEL
SHOWN WITH OPTIONAL END PANELS
96" (2438mm)
74" (1880mm)
52-3/16" (1325mm)
Y2SYS-72
33-7/16" x 72" x 49-5/8" (849mm x 1829mm x 1260mm) exterior , with base , standard painted end panels
52-3/16" x 72" x 51-5/16" (1325mm x 1829mm x 1304mm) exterior , with base , optional
1" end panels Cord Position right side*: 52-3/16" x 74" from x 52" (1325mm x 1880mm x 1322mm) 6-7/8" (174mm) Cord Position
( w x CORD l xLENGTH: d ): 7' (2133mm) 27-3/16" x 69-5/16" x 4-1/2" (690mm x 1760mm x 114mm) 39-3/8" (1000mm)
from back*: well dimensions 2-3/8" (60mm)
TY249-5/8" Side Profile (1260mm)
VOLTAGE
PHASE
CYCLE / HZ
120/208-240 208 240
1 1 1
50/60 50/60 50/60
18.75 4.5 19.0 4.6 19.0 4.6
230
1
50/60
18.3
4.2
380-415 380 415 TY2SYS Side Profile
3 3 3
50/60 50/60 50/60
9.7 9.3 10.1
4.4 3.9 4.6
42-7/16" (1078mm) 52" (1322mm)
FULL - SIZE
&
31-3/16" (792mm)
HALF - SIZE 52-3/16" (1325mm)
52-3/16" (1325mm)
Display case must be installed level. The display case must not be installed by 98" (2489mm) in any area where it may be affected 41-7/16" (1053mm) 51-5/16" steam, grease, dripping water, high temperatures, or(1304mm) any other severely adverse conditions. WITH OPTIONAL END PANELS
SHOWN WITH STANDARD END PANELS
WEIGHT 98" (2489mm)
net
WITH OPTIONAL END PANELS
(PLUG -
COUNTER TOP ONLY ; TERMINAL BLOCK - SYSTEM )
BARE END , NO PLUG (COUNTER TOP ONLY) (TERMINAL BLOCK - SYSTEM) BARE END , NO PLUG (COUNTER TOP ONLY) (TERMINAL BLOCK - SYSTEM)
385 lb (175 kg)
600 lb (272 kg)
TY2SYS-72
621 lb (282 kg)
721 lb (327 kg)
TY2-72/P
360 lb (163 kg)
575 lb (261 kg)
TY2SYS-72/P
660 lb (299 kg)
760 lb (345 kg)
TY2-72/PL; /PR
435 lb (197 kg)
650 lb (295 kg)
TY2SYS-72/PL; /PR
700 lb (318 kg)
800 lb (363 kg)
ONE - THIRD **:
12" 12"
X
QTY .
12" 12"
X
X
X
20" X 2-1/2" ( GN 1/1) 6"TY2SYS X 2-1/2" ( GN 1/3) Side Profile
5 5
10" X 2-1/2" ( GN 1/2) 6" X 2-1/2" ( GN 1/3)
10 5
FULL - SIZE SHEET PANS : MAX . CAPACITY / VOLUME :
18"
X
26"
X
1"
3
80 lbs (36 kg) 50 qts (60 L)
SPECIFICATIONS 41-7/16" (1053mm) 51-5/16" (1304mm) • Ten (10) overhead lights with two (2) light zones. • Two (2) base heat zones with two (2) adjustable thermostats with a range of 1 through 10, and two (2) heat-on indicator lights. • Three (3) tinted, reflective, tempered glass sliding doors on operator side. • One (1) 10" x 60" (254mm x 1524mm) operator-side work shelf. • Self-serve model 72/P has a self-serve pan insert 26-7/16" x 69-3/16" x 2" (672mm x 1757mm x 51mm) and includes three (3) Wire Pan Grids. • Self-serve models 72/PL and 72/PR have a self-serve pan insert 21-5/8" x 26-7/16" x 2" (549mm x 672mm x 51mm) and includes one (1) Wire Pan Grid.
ship
TY2-72
crated dimensions : l x w x h
NEMA L 14-30 P 30A, 250V PLUG
* Pans are not included with display case. ** Will also accept 4" (100mm) deep pans.
ELECTRICAL PANEL
Do not install a heated display case near a cold air source such as a freezer, air conditioning vents, or in any area where outside air fluctuation can affect performance.
&
31-3/16" (792mm)
ELECTRICAL PANEL
I NSTA L L A T IO N RE QU I R EMEN T S
model
KW
TY2 Side Profile
DIMENSIONS
ONE - THIRD **:
SHOWN WITH OPTIONAL END PANELS
96" (2438mm)
SYS-96
AMPS
P AN C O N F I G U R ATI O N * PAN SIZE
WITH OPTIONAL END PANELS
TY2SYS-72
exterior , counter - top model with legs :
52-3/16" (1325mm)
31-3/16" (792mm)
ELECTRICAL PANEL
74" (1880mm)
WITH OPTIONAL END PANELS
x w x d)
ELECTR 72 Series ICA L *Cord postion is from operator side
TY2 Profile 72" (1829mm)
52-3/16" (1325mm)
TY2SYS Profile
heated display systems
11-5/8" (294mm)
11-5/8" Cord Position from back*: 2-3/8" (60mm)
WITH OPTIONAL END PANELS
52-3/16" (1325mm)
(294mm) 33-7/16" (849mm)
ELECTRICAL PANEL
29-5/8" (753mm)
33-7/16" (849mm)
50" (1270mm)
WITH OPTIONAL END PANELS
Cord Position from right side*: 6-7/8" (174mm)
108° ENS IO NS ( h DIM
31-3/16" (792mm)
52-3/16" (1325mm) ELECTRICAL PANEL
52-3/16" (1325mm)
31-3/16" (792mm)
52-3/16" (1325mm) ELECTRICAL PANEL
TY2SYS Side Profile
29-5/8" (753mm)
108°
SHOWN WITH OPTIONAL END PANELS
Y2SYS-48
58-7/8" (1495mm)
42-7/16" (1078mm) 52" (1322mm)
58-7/8" (1495mm)
48" (1219mm)
series series
SHOWN WITH STANDARD END PANELS
TY2-72: 80" x 50" x 45" (2032mm x 1270mm x 1143mm)
TY2SYS-72: 80" x 50" x 60" (2032mm x 1270mm x 1524mm)
A CC ES S O R I E S SEAMLESSLY CONNECT MULTIPLE UNITS
SHEET PAN DIVIDER BAR PACKAGE
BUTTING KIT, COUNTER TOP
5015250
BUTTING KIT, SYSTEM
5009001
CARVING STATION PAN INSERT, SELF-SERVICE 4" (102mm) PLATFORM SCALE
( specify
deep
full - service
5002803
self - service left - side or right - side of case
5002804
5001874
THERMOSTAT GUARD COVER PLATE 5007660
1001991
WORK SHELF WITH GRAVY LANE
right - hand or left - hand )
5005639
55265
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com #55 - 04/14
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRINTED IN U.S.A.
