Preview only show first 10 pages with watermark. For full document please download

Type 100907 - Gentex Corporation

   EMBED

Share

Transcript

SPECIFICATIONS Type 100907 FREQUENCY RESPONSE: 100 Hz to 10 KHz SENSITIVITY @ 1 KHz: -30 to –22 dB 0 dB = 1Vrms/Pa @ ¼” (94 dB SPL @ ¼”) Flex Boom Microphone for General Aviation • • • • • • FAR FIELD CROSSOVER: >2500 Hz DISTORTION: <5% @ 114 dB SPL Noise Canceling Amplified Electret Microphone (carbon replacement) One piece design includes windscreen FAA Approved FAA-TSO C58a, Category A Low distortion Non-Flammable Made in the U.S.A. OUTPUT IMPEDANCE: <50 ohms RATED LOAD RESISTANCE: RS= 100-1800 ohms RATED SUPPLY VOLTAGE: 8 – 16 VDC (not polarity sensitive) RATED CURRENT DRAIN: <40 mA, T a= 25° C ANGULAR RESPONSE @ 1 KHz WEIGHT: <1 oz. 13 5 TERMINATION: U-173/U connector -25 TEMPERATURE: -40° C to +70° C -35 Near Field -45 90 -10 270 -55 -20 Relative Sensitivity (dB) 22 5 180 FREQUENCY RESPONSE HUMIDITY: 0% - 100% relative humidity (non-condensing) Far Field 100 1000 10000 IMMERSION: 2 feet 5 45 31 10 -10 -65 Frequency (Hz) 0 DIMENSIONS Boom Length Cable length GENTEX ORDERING INFORMATION Part No Boom Length Cable Length N100907-03 7.75 +/- .25 in 10.00 +/- .25 in N100907-04 7.25 +/- .25 in 6.00 +/- .25 in RS V+ Output +/- ELECTRO-ACOUSTIC PRODUCTS 5 Tinkham Avenue Derry, NH 03038 U.S.A. Tel: Typical Load Circuit +/- ® Common fax: (800)258-3554 (603)434-0311 (603)434-3002 e-mail: [email protected] www.derry.gentexcorp.com ISO 9001 Registered ©Gentex Corporation / Electro-Acoustic Products Specifications subject to change without notice (11/02)