Transcript
Proximity Sensors Inductive Long Body, Stainless Steel Type IA08BLF10NO 1641
nty rra a rs w a e 5y • Miniature stainless steel housing • Long body • Sensing distance: 1,0 mm ± 10% • Power supply: 10 to 30 VDC • Output: Transistor NPN, make switching • Protection: Short-circuit • LED-indication for output ON • 2 m PVC cable
Product Description
Ordering Key IA 08 BLF 10 NO 1641
Inductive proximity sensor with long body. Output configuration: NPN, normally open (NO).
M8 stainless steel housing with 2 m PVC cable.
Type: Ind. prox. switch Housing style Housing size Housing material Housing length Detection principle Sensing distance Output configuration Special number
10 to 30 VDC (ripple included) ≤ 10%
Indication for output ON Ambient temperature Operating Storage Degree of protection Housing material CE-marking Connection
Specifications Rated operational volt. (UB) Ripple Rated operational current (Ie) Continuous No-load supply current (Io) Voltage drop (Ud) Rated operating dist. (Sn) Protection Operating frequency (f)
Dimensions M8 x 1
≤ 200 mA @ + 25°C (+75°F) ≤ 10 mA (ON) < 2,5 V (@ Imax) 1.0 mm ± 10% Short circuit 2000 Hz
Wiring Diagram 1 BN
+
LED, yellow -25° to +70°C (-13° to +158°F) -30° to +75°C (-22° to +167°F) IP 67 (Nema 1, 3, 4, 6, 13) Stainless steel, AISI 303 Yes Cable, 2 m, PVC, AWG 26
Installation Hints To avoid interference from inductive voltage/ cur- Relief of cable strain rent peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables
Incorrect
45 4 BK
Correct 3 BU
LED
-
The cable should not be pulled Switch mounted on mobile carrier
Any repetitive flexing of the cable should be avoided
Specifications are subject to change without notice (27.03.02)
Protection of the sensing face
A proximity switch should not serve as mechanical stop
1
