Transcript
www.rohlhome.com PERRIN & ROWE® MIMAS CONTEMPORARY SINGLE HOLE KITCHEN FAUCET WITH “C” SPOUT AND SIDESPRAY
Perrin & Rowe® Kitchen
U.4846LS-2
COLORS/FINISHES
WARRANTY
• Metal lever handle only • Made from solid brass • 1/4-turn ceramic disc valves • Insulated brass sidespray • 1 3/4” max. installation depth on deck • 15” spout height • 9” reach swivel spout • Inca Brass & English Bronze not available • 1.8 GPM • Requires 2 1/2” clearance from backsplash
• Polished Chrome • Polished Nickel • Satin Nickel
• Limited Lifetime
9"
1 3/4" MAX
Ø2"
5"
Ø2 1/4"
5 1/2"
3" 9"
15"
FEATURES
Ø1 1/8" HOLE
Ø1 3/8" HOLE 1/2" NPSM
HOT SUPPLY
COLD SUPPLY
HOSE LENGTH 47 1/4"
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
1
ROHL WARRANTY POLICY All products supplied by ROHL carry warranties against manufacturing defects.
www.rohlhome.com
Perrin & Rowe products carry a Limited Lifetime Warranty. U.4846LS-2 SPARE PARTS ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative product) to replace those which have proven defective in materials or workmanship. For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
SPARES
Complete Rinse Head 9.27875*
9.18875*
9.20860*
9.19426 BAR SPOUT
Complete Hose 9.28426*
9.25552 9.17862* RINSE - 9.13842 NON-RINSE - 9.13843
9.25552 9.17862*
9.13841 9.26860*
9.07840
9.20112*
9.01840*
9.26400
9.25552 9.17862*
9.20867*
9.28735 MIXER SERVICE KIT 9.54885
9.12861*
9.18381*
9.12840* 9.28512 RINSE VERSION
* Where indicated please specify color
SPARE PARTS & SERVICE Perrin & Rowe products are manufactured in the UK, using the latest technology and built to the highest quality standards. 3 Parker Irvine CA 92618 (714) 557-1933
We would like to thank you for purchasing a Perrin & Rowe product and take this opportunity to invite you to look at other luxury products by us. Please contact us to recieve our latest catalogue.
www.rohlhome.com Perrin & Rowe is a registered trademark of Avilion Ltd.
904885U
Issue 3
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
2
www.rohlhome.com INSTALLATION INSTRUCTIONS
uct (or a comparable alternative hip.
The Contemporary Kitchen Collection Installation & User Guide
Contemporary Mimas Mono Sink Mixer with Rinse • U.4841LS-2 C-Spout Mono Mixer • U.4846LS-2 C-Spout W/Rinse • U.4842LS-2 Bar Spout Mixer
9
9.26860*
9.01840*
1 3/8" MAX
9.13841
9
S CR 4" 1/
1 . 3/4" MAX
9.20860*
1. 3/8" HOLE
S CR 4" 1/
1.3/8" HOLE
S CR 6"
9.18381*
HOT IN 1/2"
COLD IN 1/2"
9.28512 RINSE VERSION
1. 3/8" HOLE Temp Range: Min 1°C/34°F Max 85°C/185°F
ed in the UK, using the latest ity standards.
ng a Perrin & Rowe product and ok at other luxury products by us. atalogue.
Recommended Working Pressure: Max5bar/75psi Min 1bar/15psi
HOT IN 1/2"
COLD IN 1/2"
1.1/8" HOLE
1 . 3/4" MAX
9.12840*
HOT IN 1/2"
COLD IN 1/2"
Ideal performance obtained with equal hot & cold pressures. 904885U
Issue 3
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
3
www.rohlhome.com INSTALLATION INSTRUCTIONS
The Contemporary Kitchen Collection Installation & User Guide Congratulations on the purchase of your Perrin & Rowe Kitchen Product. Correctly installed and with sensible care, this product will give you many years of trouble free service.
IMPORTANT INFORMATION
2
The following instructions are for the rinse and non-rinse version of the model you are installing. Please read carefully to ensure correct installation. Before you proceed... We recommend you engage the services of a registered plumber to install this product. For ease of possible future servicing, we also recommend the fitting of conveniently placed isolating valves.
FIB
SIDE SPRAY UNIT SOCKET
BAC
In addition to the guide below it is essential that the written information overleaf is carefully read and understood.
Preparation Check Box for Installer Flush the plumbing system before installing the kitchen product.
1
Once unpacked remove large & small base seals, rosette, fixing nut, securing nut and clamp plate ready for installation. • Temperature of the hot water supply does not exceed 185ºF. • Recommended minimum water supply pressure - 25psi.
BASE RING
SIDE SPRAY HOSE
3
SIDE SPRAY
• Recommended maximum water supply pressure - 100psi. • Ideal performance obtained with equal hot & cold pressures.
BLACK RUBBER WASHER
SIDE SPRAY UNIT SOCKET
Mimas - Lever should be on the right when viewed from the front of the fitting. Hole centre a minimum of 2. 1/2" from the wall. LARGE BASE SEAL
SECURING STUD
Monobloc mixers require a Ø1. 3/8" hole through the surface they are to be installed on. Maximum counter top thickness 1. 3/4". Insert the flexible connections through the hole ensuring that the base seal is in place between the mixer and mounting surface.
CLAMP PLATE SECURING NUT
From the underside of the counter top, place the clamp plate on the securing stud and using the box spanner supplied, put fixing nut in spanner and tighten until mixer is held firmly in position.
BOX WRENCH
FLEXIBLE HOSE
BEFORE USE
• Carefully check the installation for leaks. • If further building work is to be carried ou the finish. • Please ensure that the installation complie
CARE & MAINTENANCE
Wipe down after use to avoid water spottin
Secure spout with supplied Box Wrench. Ensure all connections are firmly tightened
Occasional cleaning with warm soapy water plated finish in good condition.
Do not use proprietary abrasive liquids products with ammonia bleach or lime guarantee.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
4
www.rohlhome.com INSTALLATION INSTRUCTIONS
ctly installed and with sensible care,
If your mixer has a side spray please follow steps 2 & 3 to install correctly, otherwise please connect Hot & Cold water supplies.
2 BASE SEAL
the model you are installing.
egistered plumber to install
Secure side spray unit socket in a suitable position using a faucet wrench or a 36 AF wrench.
of conveniently placed
FIBRE WASHER
SIDE SPRAY UNIT SOCKET
BACKNUT
tion overleaf is carefully read
Screw flexible hose onto the end of side spray hose.
emove large & small base seals, t, securing nut and clamp plate tion. supply does not exceed 185ºF.
er supply pressure - 25psi.
Ensure connections are firmly tightened.
SIDE SPRAY HOSE
3
SIDE SPRAY
BLACK RUBBER WASHER
3/8" hole through the surface they m counter top thickness 1. 3/4".
through the hole ensuring that the he mixer and mounting surface.
nter top, place the clamp plate on e box spanner supplied, put fixing l mixer is held firmly in position.
Connect Hot & Cold water supplies to shanks. SIDE SPRAY UNIT SOCKET
e right when viewed from the a minimum of 2. 1/2" from the
Ensure black rubber washer is in place before securing side spray to flexible hose. Holding the side spray, screw the flexible hose onto the end of side spray and place into side spray unit socket. Make sure orientation of side spray is correct.
er supply pressure - 100psi.
with equal hot & cold pressures.
Place flexible hose through top of side spray unit socket as shown in diagram.
FLEXIBLE HOSE
Ensure all connections are firmly tightened.
Please Note: Ceramic disc valves are fitted as standard to this mixer. Flow from FULLY OFF to FULLY ON is achieved by rotating the handles a quarter turn.
BEFORE USE • Carefully check the installation for leaks. • If further building work is to be carried out in the vicinity, cover the tap with a plastic bag to avoid damaging the finish. • Please ensure that the installation complies with the water supply bye-laws.
CARE & MAINTENANCE Wipe down after use to avoid water spotting and mineral build up.
Wrench.
irmly tightened
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the plated finish in good condition. Do not use proprietary abrasive liquids, powders, or pads to clean the shower. Do not use any products with ammonia bleach or limescale remover. You will damage the plated finish and void your guarantee.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
5
