Transcript
UK-1DF00/6/12/18 SINGLE FAUCET UK-1DF00 single faucet body (no spout supplied) SPECIFICATION Single hole deck mounted faucet body with single ½” NPSM inlet. Supplied with ½” BSP adapter and 2 colour coded screws to indicate whether hot or cold water supply. Requires a 1” (25mm) hole and fits counters up to 1¾” thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. Pop & Lock fitting suitable for a range of swivel or gooseneck spouts and EasyInstall pre-rinse units. A WRAS approved product.
UK-1DF06 single faucet body with 6” (152mm) spout SPECIFICATION Single hole deck mounted faucet with 6” (150mm) swivel spout and single ½” NPSM inlet. Supplied with ½” BSP adapter and 2 colour coded screws to indicate whether hot or cold water supply. Requires a 1” (25mm) hole and fits counters up to 1¾” thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-1DF12 single faucet body with 12” (305mm) spout SPECIFICATION Single hole deck mounted faucet with 12” (305mm) swivel spout and single ½” NPSM inlet. Supplied with ½” BSP adapter and 2 colour coded screws to indicate whether hot or cold water supply. Requires a 1” (25mm) hole and fits counters up to 1¾” thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-1DF18 single faucet body with 18” (457mm) spout SPECIFICATION Single hole deck mounted faucet with 18” (457mm) swivel spout and single ½” NPSM inlet. Supplied with ½” BSP adapter and 2 colour coded screws to indicate whether hot or cold water supply. Requires a 1” (25mm) hole and fits counters up to 1¾” thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-1DF00/12 SINGLE FAUCET
fits counters up to 1¾” thick
fits counters up to 1¾” thick
the full range of T&S products are available in the UK from
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-2DP00/6/12/18 MONO FAUCET UK-2DF00 mono faucet body (no spout supplied) SPECIFICATION Mono deck mounted mixer faucet body with twin reinforced flexible hoses terminating in 15mm compression fittings. Requires a 1¼” (32mm) hole and fits counters up to 17/8” (47mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. Pop & Lock fitting suitable for a range of swivel or gooseneck spouts and EasyInstall pre-rinse units. A WRAS approved product.
UK-2DF06 mono faucet body with 6” (152mm) spout SPECIFICATION Mono deck mounted mixer faucet with a 6” (150mm) swivel spout fitted and twin reinforced flexible inlet hoses terminating in 15mm compression fittings. Requires a 1¼” (32mm) hole and fits counters up to 17/8” (47mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-2DF12 mono faucet body with 12” (305mm) spout SPECIFICATION Mono deck mounted mixer faucet with a 12” (305mm) swivel spout fitted and twin reinforced flexible inlet hoses terminating in 15mm compression fittings. Requires a 1¼” (32mm) hole and fits counters up to 17/8” (47mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-2DF18 mono faucet body with 18” (457mm) spout SPECIFICATION Mono deck mounted mixer faucet with an 18” (457mm) swivel spout fitted and twin reinforced flexible inlet hoses terminating in 15mm compression fittings. Requires a 1¼” (32mm) hole and fits counters up to 17/8” (47mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-2DF00/12 MONO FAUCET
the full range of T&S products are available in the UK from
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-7DP00/6/12/18 TWIN FAUCET UK-7DF00 twin faucet body (no spout supplied) SPECIFICATION Twin hole deck mounted faucet body with two ½” BSP inlets. Requires two 1” (25mm) holes at 7” centres and fits counters up to 11/8” (29mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. Pop & Lock fitting suitable for a range of swivel or gooseneck spouts and EasyInstall pre-rinse units. A WRAS approved product.
UK-7DF06 twin faucet body with 6” (152mm) spout SPECIFICATION Twin hole deck mounted faucet with two ½” BSP inlets and 6” (150mm) swivel spout. Requires two 1” (25mm) holes at 7” centres and fits counters up to 11/8” (29mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-7DF12 twin faucet body with 12” (305mm) spout SPECIFICATION Twin hole deck mounted faucet with two ½” BSP inlets and 12” (305mm) swivel spout. Requires two 1” (25mm) holes at 7” centres and fits counters up to 11/8” (29mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
UK-7DF18 twin faucet body with 18” (457mm) spout SPECIFICATION Twin hole deck mounted faucet with two ½” BSP inlets and 18” (457mm) swivel spout. Requires two 1” (25mm) holes at 7” centres and fits counters up to 11/8” (29mm) thick. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish. A WRAS approved product.
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-7DF00/12 TWIN FAUCET
the full range of T&S products are available in the UK from
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-8WF00/06/12/18-EE WALL MOUNTED FAUCET UK-8WF00-EE twin wall mounted faucet body without spout SPECIFICATION Twin mixer wall mounted faucet body supplied without spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
UK-8WF06-EE twin wall mounted faucet body with 152mm swivel spout SPECIFICATION Twin mixer wall mounted faucet body supplied with 152mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
UK-8WF12-EE twin wall mounted faucet body with 305mm swivel spout
UK-8WF18-EE twin wall mounted faucet body with 457mm swivel spout
SPECIFICATION
SPECIFICATION
Twin mixer wall mounted faucet body supplied with 305mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper strikingand high density chrome plate finish.
Twin mixer wall mounted faucet body supplied with 457mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
8” (203 mm)
2-3/16” Lever (55 mm) handles with color coded screws and ceramic cartridges
1/2” BSP male
Wall requires 1” (25 mm) holes on 8” centers 2” (51 mm) flanges
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-8WF00/06/12/18-EE WALL MOUNTED FAUCET UK-8WF00-EE twin wall mounted faucet body without spout SPECIFICATION Twin mixer wall mounted faucet body supplied without spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
UK-8WF06-EE twin wall mounted faucet body with 152mm swivel spout SPECIFICATION Twin mixer wall mounted faucet body supplied with 152mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
UK-8WF12-EE twin wall mounted faucet body with 305mm swivel spout
UK-8WF18-EE twin wall mounted faucet body with 457mm swivel spout
SPECIFICATION
SPECIFICATION
Twin mixer wall mounted faucet body supplied with 305mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper strikingand high density chrome plate finish.
Twin mixer wall mounted faucet body supplied with 457mm spout for hot and cold water feed. Requires two 25mm holes at 8” centres for 1/2” BSP inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
8” (203 mm)
2-3/16” Lever (55 mm) handles with color coded screws and ceramic cartridges
1/2” BSP male
Wall requires 1” (25 mm) holes on 8” centers 2” (51 mm) flanges
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-7DF03-WW-WH4 GOOSENECK FAUCET UK-7FF03-WW-WH4 twin wall mounted faucet body with 75mm gooseneck spout SPECIFICATION Twin mixer wall mounted faucet body supplied with 75mm gooseneck spout for hot and cold water feed. Requires two 25mm holes at 7” centres for 1/2” NPT inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
3” (72 mm)
12” (305 mm) 4” Wrist blade handles with color coded screws
2-1/4” (57 mm)
8-1/4” (210 mm)
2” (51 mm)
7” (180 mm)
1/2” NPT x 90° flange
3-1/2” (88 mm)
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
UK-7DF05-WW-WH4 GOOSENECK FAUCET UK-7FF05-WW-WH4 twin wall mounted faucet body with 141mm gooseneck spout SPECIFICATION Twin mixer wall mounted faucet body supplied with 141mm gooseneck spout for hot and cold water feed. Requires two 25mm holes at 7” centres for 1/2” NPT inlet connections. Ceramic cartridge with quarter turn lever handles. Manufactured in brass with copper striking and high density chrome plate finish.
5-1/2” (141 mm)
Rough-in requirements 1” (25 mm) holes on 7” (178 mm) centers
14” (357 mm)
4” Wrist blade handles with color coded screws
2-1/4” (57 mm)
8-9-1/16” (218 mm)
2” (51 mm)
7” (180 mm) 1/2” NPT x 90° flange
3-1/2” (88 mm)
th e fu ll ra n g e o f T & S p ro d u c ts a re a v a ila b le in th e U K fro m
FIRST CHOICE CATERING SPARES LTD Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU Tel: 01543 577778 Fax: 01543 504141 Email:
[email protected] Web: www.firstchoice-cs.co.uk
