Transcript
THE ULTIMAKER 2+ FAMILY PROFESSIONAL 3D PRINTING Based on the award-winning Ultimaker 2 and Ultimaker 2 Extended and featuring all our latest innovations and understanding of 3D printing, the Ultimaker 2+ and the Ultimaker 2 Extended+ are two of the most advanced, accurate and reliable desktop 3D printers around.
GEARED FEEDER, INCREASED RELIABILITY The innovative feeder allows you to easily swap filament and choose the correct pressure for your filament.
SWAPPABLE NOZZLE, GREATER CONTROL Easily switch between 0.25, 0.4, 0.6 and 0.8 mm nozzles for greater detail or faster print speed.
OPTIMIZED AIRFLOW, SMOOTHER PRINTS The new fancaps ensure the airflow is aimed perfectly below the nozzle and equally from both sides.
DIMENSIONS AND WEIGHT
357 mm 14.0 inches
357 mm 14.0 inches
388 mm 15.3 inches
488 mm 19.2 inches
342 mm 13.5 inches
357 mm 14.0 inches
Including bowden tube and reel holder
Including bowden tube and reel holder
493 x 342 x 588 mm (19.4 x 13.5 x 23.1 “)
493 x 342 x 688 mm (19.4 x 13.5 x 27.1 “)
Weight
Weight
11.3 kg (399 ounces)
12.3 kg (434 ounces)
223 x 223 x 205 mm (8.8 x 8.8 x 8.1 inches)
223 x 223 x 305 mm (8.8 x 8.8 x 12.0 inches)
Print technology Print head Filament diameter Layer resolution
Fused Filament Fabrication (FFF) Swappable nozzle 2.85 mm 0.25 mm nozzle: 150 to 60 micron 0.4 mm nozzle: 200 to 20 micron 0.6 mm nozzle: 400 to 20 micron 0.8 mm nozzle: 600 to 20 micron 12.5, 12.5, 5 micron 30 to 300 mm/s 0.25 mm nozzle: up to 8 mm3/s 0.4 mm nozzle: up to 16 mm3/s 0.6 mm nozzle: up to 23 mm3/s 0.8 mm nozzle: up to 24 mm3/s Heated glass buildplate (50° to 100° C) PLA, ABS, CPE (Open Filament System)* 0.25, 0.4, 0.6, 0.8 mm 180° to 260° C 50° to 100° C ~ 1 minute < 4 minutes 50 dBA Standalone 3D printing from SD card Manual, assisted leveling process
BUILD VOLUME
PRINTER PROPERTIES
X, Y, Z accuracy Print head travel speed Extrusion speed
Build plate Supported materials Nozzle diameter Nozzle temperature Build plate temperature Nozzle heat up time Build plate heat up time Average operating sound File transfer Build plate leveling SOFTWARE
Print preparation Supported OS Supported file types
Cura - Official Ultimaker Software (free) (prepared for nozzle size selection) Mac OS X, Windows, Linux STL, OBJ, DAE
*Ultimaker printers can be used with third party filament. However for the best printing results we recommend you use Ultimaker Materials.
CURA SOFTWARE AND ULTIMAKER SEAMLESSLY COMBINED Cura prepares your model for 3D printing. For novices, it makes it easy to get great results. For experts, there are over 200 settings to adjust to your needs. As it’s open source, our community helps enrich it even more.
ULTIMAKER MATERIALS OPTIMIZED PRINT QUALITY To create the very best print quality, we worked intensively with materials suppliers to develop unique filament formulations. And to optimize every print, Cura has material profiles that can take care of everything or give you total freedom.
ULTIMAKER 2 GO THE MIGHTY MINI 3D PRINTER Small in size, but big in 3D printing abilities and reliability, the Ultimaker 2 Go is one of the most powerful little printers around. And with a compact design, it’s great for makers on the go, or those just getting started in the 3D world.
PRINTER PROPERTIES
Print technology Print head Build volume Filament diameter Layer resolution X, Y, Z accuracy Print head travel speed Extrusion speed Build plate Supported materials Nozzle diameter Nozzle temperature Nozzle heat up time Average operating sound File transfer Build plate leveling
Fused Filament Fabrication (FFF) Swappable nozzle 120 x 120 x 115 mm 2.85 mm 0.4 mm nozzle: 200 to 20 micron 12.5, 12.5, 5 micron 30 to 300 mm/s 0.4 mm nozzle: up to 16 mm3/s Glass buildplate with blue tape PLA 0.4 mm 180° to 260° C ~ 1 minute 49 dBA Standalone 3D printing from SD card Manual, assisted leveling process
PHYSICAL DIMENSIONS
Dimensions Nett weight Shipping weight
258 x 250 x 287.5 mm 6.2 kg 14.0 kg
SOFTWARE
Print preparation Supported OS Supported file types
Cura - Official Ultimaker Software (free) Mac OS X, Windows, Linux STL, OBJ, DAE, AMF
ULTIMAKER ORIGINAL+ MAKE IT YOURS Hackable without limits, our original open-source 3D printer gives you endless freedom to modify it to your heart’s content. With this DIY kit, you’ll have the most reliable, accurate and fun 3D printer around.
PRINTER PROPERTIES
Print technology Print head Build volume Filament diameter Layer resolution X, Y, Z accuracy Print head travel speed Extrusion speed Build plate Supported materials Nozzle diameter Nozzle temperature Build plate temperature Nozzle heat up time Build plate heat up time Average operating sound File transfer Build plate leveling
Fused Filament Fabrication (FFF) Swappable nozzle 210 x 210 x 205 mm 2.85 mm 0.4 mm nozzle: 200 to 20 micron 12.5, 12.5, 5 micron 30 to 300 mm/s 0.4 mm nozzle: up to 16 mm3/s Heated glass buildplate (50° to 100° C) PLA, ABS, CPE 0.4 mm 180° to 260° C 50° to 100° C ~ 1 minute < 4 minutes 49 dBA Standalone 3D printing from SD card Manual, assisted leveling process
PHYSICAL DIMENSIONS
Dimensions Nett weight Shipping weight
357 x 342 x 388 mm 12.3 kg 19.5 kg
SOFTWARE
Print preparation Supported OS Supported file types
Cura - Official Ultimaker Software (free) Mac OS X, Windows, Linux STL, OBJ, DAE
ULTIMAKER
www.ultimaker.com
