Transcript
ULTIMATE6 M PRO E Please find information on IP symbols on our info sheet or at www.ortlieb.com/ip-symbols
Touring handlebar bag with power connection Waterproof transparent lid for GPS etc. Lockable lid with magnetic closure Attachment for ORTLIEB mapcase and Mobile Guide (accessories) Highly reflective 3M Scotchlite reflector
Outer mesh pocket with Velcro (not waterproof!)
Shoulder strap, removable
Stable transparent sleeve with foam padding
Attachment for shoulder strap Power connection
Internal dimensions
Height cm/in.
Width cm/in.
Depth cm/in.
Vol. l/cu.in.
Weight g/oz.
main compartment
18/7.1
23.5/9.3
14/5.5
7.5/458
800/28.8
lid compartment
1.3/0.5
14.5/5.7
7/2.8
• Waterproof handlebar bag with lockable mounting set suitable for handlebars (diameter up to 31,8 mm) • Power connection for charging via hub dynamo provided (in connection with Busch+Müller „E-Werk“ or Busch+Müller „Luxos U Lumotect IQ2“ or „The Plug“ by Supernova) • Do not use with carbon handlebars! • Mounting compatible with products by Rixen & Kaul (Klick-Fix system) • Stable, lockable lid with waterproof transparent sleeve for mobile devices • Unrestricted use of touchscreen • Integrated valuable pocket with zip and snap hook for keys • Removable internal dividers and removable shoulder strap • Highly reflective 3M Scotchlite reflector on front of bag • Attachment provided for mapcase and protective cases with cord fixing (optional accessories) • Large outer mesh pockets with Velcro (not waterproof!) • Base loops for transporting further equipment • Maximum load capacity 3 kg/ 105 oz. • Accessories: extension adapter (including separate long cable) for mounting onto extremely curved handlebars, mounting set (e.g. for a second bike), padded camera insert, USB cable; Attention: keep cards with magnetic stripe at least 2 cm away from magnetic closure Bag comes with shoulder strap, inner pocket, internal dividers, lockable mounting kit, cable with universal open cable ends, 2 keys Note: In order to meet standard IP54 (5=protected against dust, 4=protected against splash water coming from all directions) the lid must be closed properly. © ORTLIEB Sportartikel GmbH • Rainstraße 6 • D-91560 Heilsbronn •
[email protected] • www.ortlieb.com
U6M_Pro_E_ 01_2015
Stable, flat bottom with internal stiffener
ULTIMATE6 M PRO E Touring handlebar bag with power connection
Seite 2 • page 2
Option to connect to cable Contact points to mounting block on handlebar
Handlebar bag mounting with reflective foil (lockable) included Contact points to handlebar bag frame
U6M_Pro_E_ 01_2015
• A transformer (available separately) converts the AC voltage provided by the hub dynamo into electric power for mobile end devices. The converter may be positioned outside the bag (e.g. Busch + Müller light “Luxos U Lumotec IQ2” or Supernova “The Plug”) or inside (e.g. Busch + Müller “E-Werk”). • The contact points in the mounting elements are automatically separated as the bag is taken off the mounting. • Electricity generated by the hub dynamo is provided for charging mobile devices inside the bag or for operating devices such as GPS inside the transparent lid.
© ORTLIEB Sportartikel GmbH • Rainstraße 6 • D-91560 Heilsbronn •
[email protected] • www.ortlieb.com
