Transcript
UNDERWATER MONITOR SYSTEM
INSTRUCTION MANUAL
Read these instructions completely before operating this unit
Notices Please read the following manual details before using * Pay attention to dampphoof for the high resolution * Don’t break the LCD screen surface, and clean the surface by soft cloth if the screen dirty * Don’t dismantle the unit by unprofessional * Push the unit L/R switch if find the letter reverse * Install the bottom side of the outer shell or inner side chamfer by customer’s self-selection in accordance with bedframe
7″TFT-LCD color monitor main function □ One channel video/audio input □ Two channel video input and one channel audio input Vision: full color Video input: 1Vp-p 75Ω Resolution: 320(H) ×RGB×234(V) =224640 pixels System: PAL or NTSC Power: 12VDC, inside⊕ and outside ⊙ Back-hung function: can be back-hung installed, and self-selection switch The picture by up and down reversal Back-off vision: the picture can right and left reversed by ″L/R″ switch Consuming power: <8W Operating temperature:-10℃~ +60℃ Storage temperature: -20℃~ +70℃
Indication of cable connection □One channel video/audio input
1. Red socket: Power 2. Yellow socket: Video input 3. White socket: Audio input □Two channel video input and one channel audio input * This car-use monitor has the function of mirror site in one channel video
1. Red socket: Power 2. Yellow socket: V1 input 3. Black socket: V2 input 4. White socket: audio input
operation Check switch on ″OFF″ position (button on high position), input power 12VDC/500mA (inside⊕ outside⊙) 1. Connect audio/video signal 2. Push switch on ″ON″ position ,(button on low position) 3. Adjust COLOR and BRIGHT knob at best result 4. Adjust screw on the frame at the best degree 5. Select to reverse picture in accordance with installment situation and usage need. Picture reverse up and down self-selection; left and right reverse needs artifical setup, please press left and right reverse switch 6. Adjust VOLUME knob to the appropriate output volume.
Simple problems Resolution
Problem judgment No response on screen (black screen)
No picture
No color
Problem reason 1. 2. 3. 4.
Power damage or no suit for product requirement Connect opposite polarity of the power Power fuse blow out in the unit Unit damage
1. No video signal 2. Video connect cable short circurt or open circurt 3. Unit damage 1. No matching color signal system 2. Weakliness of input video signal 3. Unit damage
UNDERWATER CAMERA Introduction Underwater camera is designed to connect to your TV, VCR, LCD TV or some Digital Video cameras/camcorders with an A/V input. Have provided ″Gender Adaptors″ in the case that your Digital Video Camera cannot accept male RCA plugs. The Underwatercam is ideal for use on your home TV or VCR (when using underwatercam in the pool) or can be used on TV’s found on cruise or dive boats, 12V portable VCRs or LCD monitors(with RCA input).
What Accessories is in this package? A) B) C) D) E)
Underwater Camera with cable DC 12V Battery Charger 12V Sealed Lead-Acid Rechargeable Battery (OPTIONAL) Connector (for battery charging only) 12V Car Cigarette Plug Adaptor
A
C
B
D
E
Parts of underwater camera 1. 2. 3. 4. 5. 6.
20m or 30m cable Underwater Camera with White LEDs Stainless Steel Ballast Video output jack DC 12V Power Plug (female) optional DC 12V Power Plug (male) optional
Remark:you can only use one of the DC 12V power plug, depending on female or male plug
1
2
3 4 5 6
Connecting your Underwater Camera IMPORTANT INFORMATION 1. The camera must not be located to look directly into the sun or any other bright light source as this will not only result in a poor image, but will eventually damage the electronics of the camera. 2. Areas with a high degree of contrast in the light levels require careful Positioning of the camera to obtain the best image 3. The best viewing angle is achieved by placing the camera in a position where it is looking down on the subject. 4. Additional lighting may be required if water quality is poor, or in low light conditions. 5. The camera has been tested waterproof to a depth of 18 Meters. Any use below this depth will void the camera’s warranty. 6. Always wash the camera in warm water and soap after use, to remove salt and other corrosive agents. 7. Always use appropriate water safety precautions when operating the Underwater Camera, and ensure appropriate level of supervision of children when near water.
Using your Underwater Camera Underwater camera can be used for a variety of fun and practical applications and can be used both in and out of water! We suggest using the Underwater camera for the following: Swimming: Videotape the kids in the water-help improve their swimming techniques or record their very first swim. Place the Underwater Cam at the bottom of the pool and kids
will enjoy seeing their water games captured on VCR! Place the Underwater Cam in your fish tank and see your aquarium fish on TV! Snorkeling & Diving: Record snorkeling or dicing trips*, show friends & family the tropical fish, coral reefs, underwater treasures and friendly dolphins you encountered on your holiday! Underwater Cam is also ideal for the elderly who are unable to swim but still want see the action! Fishing: See the type and quantity of fish below, or find out what the conditions are like beneath your boat (i.e. weeds, rocks, sand) Inspect damaged propellers by simply lashing the Underwater Cam to a boat hook or pole. Ice Fishing: Examine your location and make sure there are fish below before you set up your tent! Big Game Fishing: Connect the Underwater Cam to your camcorder and record the action of your fishing trips-SEE sharks devouring bait! Lake Fishing: Make the most of your time on the water-don’t wait for the fish to come to you-you can now find the fish! * Camera warranted to 18m/60ft depth. DO NOT EXCEED OR WARRANTY WILL BE VOID # with AV input ** Water quality will affect viewing distance, additional lighting may be required.
More uses for the Underwatercam... Education: Show children what goes on at the bottom of the sea, lake, fishpond or aquarium. Search & Rescue, Farming & Marine Departments: Look down wells and tanks or search dams, rivers and flooded mine shafts**. Search sink holes, look down pipe or large drain holes for missing pets or children. Marine departments can check for damage, inspect boats or search for wrecks. Farms and Ranches: Farmers can use Underwatercam to inspect the bottom of wells, tanks and dams. Plumbers: Use Underwatercam to check drains and pipes for root/branches/leaf clogs and blockages.
Technical Specifications Monitor: Display screen Color system Receiving channel Audio output Input voltage Comsumption
TFT 7 inch PAL;NTSC AV/camera more than 100Mv DC 12V less than 9.5W
Camera: Input voltage Image sensor Sensor Size Pixel Resolution Electronic shutter Lens Angular field of view: Effective focal length Maximum relative aperture Resolution Video signal output Power Consumption S/N Ratio Packaging material Operating temperature Humidity
12V DC Type: CMOS 1/3″ (8.35mm) 628(H) × 582(V) 0(EIA)250,920 pixels 1/60 ∽ 1/15000/sec 60degree 6mm F/2.0 420 TV lines (H) 1 V (p-p) composite video signal at 75ohm termination 1 Watt 40dB High Impact ABS Plastic -50F ∽ +160F 100% condensing
Complete unit Net weight Gross weight Accessories:
5.2KG 5.9KG 1. Power Adaptor/Battery charger 2. Sealed Lead-acid battery (12V 1.2Vh) OPTIONAL 3. Cigarette plug adaptor 4. Connector
More uses for the Underwater cam… To allow the Underwater cam to look straight down, simply clip the cable through the ring near the back of the camera. This will allow the camera to be suspended by the cable in a vertical position. You can also remove the Stainless Steel Ballast and insert a pole, broom handle or similar and use it to point the camera at the area you wish to view. See illustrations for examples.
