Preview only show first 10 pages with watermark. For full document please download

Uninterruptable Power Supply

   EMBED


Share

Transcript

UNINTERRUPTABLE POWER SUPPLY ELEVATOR DRIVE ACCESSORIES Magnetek offers uninterruptable power supply modules as add-on accessories for our HPV® 900 Series 2 and HPV® 900 Axial Flux Elevator Drives. The PRM (Single Phase) and NH S (Three Phase) Series Uninterruptable Power Supply (UPS) models are the ideal solutions in power loss situations. Solutions are available for all power loss scenarios, beginning with a small UPS to offer a simple brake lift solution to allow the elevator to roll in the outof-balance direction to the next floor for passenger evacuations. For more complex applications, our UPS Sizing Tool enables us to select the most suitable UPS to operate any load at any speed for any length of time. UPS models are supplied with a dry contact card as standard to provide status outputs to the car controller. Additionally, there are optional Ethernet and serial output interfaces available for communication to car controllers and BMS systems, enabling the user to make informed decisions regarding elevator operation based on the battery status of the UPS. PRM Series Single Phase up to 10kVA • Designed to work as a standalone unit or in a 19" rackmount system • LCD control panel displays UPS and power parameters and a visual display of UPS status • USB, RS232, and Ethernet interface for computernetwork communication with SNMP protocol support • ECO-Mode provides up to 99% efficiency and allows for significant cost reductions and heat emissions • High overload capacity provides power reliability during peak demand conditions • Easily configurable to extend operation time NH S Three Phase 10-30kVA (larger upon request) • Automatic Bypass (Static Switch) provides continuous load supply in critical conditions • LCD control panel displays UPS and power parameters • RS485, RS232, and Ethernet interface for remote UPS and load supervision and control • Three-level IGBT Inverter ensures excellent parameters and higher efficiency for a wide range of loads • Easily configurable to extend operation time PRM Model Capacity VA/W PRM 1K 1000/900 PRM 2K Output Number of Phases in:out 2000/1800 Input Overload Capacity Voltage Voltage 200/208/ 220/230/ 208/220/ 230/240 VAC 240 VAC PRM 3K 3000/2700 PRM 10K 6000/5400 ± 0.05 Hz Input Power Factor 10000/9000 Crest Factor  0.99 Dimensions Weight: Weight: of battery UPS with Battery internal module module batteries (WxDxH) 112% - continuous, 145% - 2 min., 150% - 30 sec. 3:1 Certifications Operation Mode Indicators: LCD display, sound alarm Standards: CE, EN6204-2:2006 (EMC), EN62040-1:2008 (LVD) 16.2 kg 20.2 kg 19.7 kg 27.5 kg 28.6 kg 33.3 kg 46 kg 42 kg 82.5 kg 63 kg 440 x 438 x 87 mm (2U) 440 x 608 x 87 mm (2U) Communications Communication: RS-232, Dry Contact in/out, USB, SNMP slot, MODBUS, REPO Dimensions of UPS (WxDxH) 112% - continuous, 125% - 3 min., 150% - 30 sec. Frequency Frequency 50/60 50/60 Hz 1:1 PRM 6K Weight and Dimensions 438 x 698 x 129 mm (3U) 438 x 704 x 215.5 mm (5U) 438 x 606 x 129 mm (3U) Options • • • • • SNMP Web Card 19" Rack-mount kit External battery cabinets Remote status panel Monitoring and shutdown software, WinPower • Environmental sensor (EMD) • AS 400 Card • REPO NH S Model NH S 10 Capacity kVA/kW Weight and Dimensions without Batteries Number of Phases in:out Input Output Dimensions of UPS (WxHxD) Weight of UPS Voltage 380/400/415 VAC 10/8 Frequency NH S 15 Voltage 380/400/415 VAC 15/12 3:3 NH S 20 20/16 NH S 30 30/24 Frequency 50/60 Hz Input Power Factor  0.99 50/60 ± 0.01 Hz Overload Capacity (Inverter) 103% - continuous, 110% - 60 min., 125% - 10 min., 150% - 60 sec. 68 kg 540 x 1100 x 690 mm Overload Capacity (Bypass) 125% - continuous, 135% - 60 min., 150% - 10 min., 1000% - 100 msec. 80 kg Crest Factor 3:1 Communications Certifications Operation Mode Indicators: LCD touch display, LED indicators, sound alarm Standards: CE, EN 62040-1-1, EN60950-1, EN62040-3:2001, EN62040-2:2005, EN62040-2:2006 Communication: RS-232, RS-485, Dry Contact, SNMP slot, MODBUS, LEPO, REPO, parallel work connector Options • • • • • SNMP Web REPO Environmental sensor (EMD) External Maintenance Bypass External Battery Cabinets W W W.EL EVATO RDRIV E S. C O M MAGNETEK ELEVATOR (US) [email protected] N50 W13605 Overview Drive Toll-Free Phone 800.236.1705 Menomonee Falls, WI 53051 Phone 262.252.6999 Fax 262.790.4142 9/15 MAGNETEK LTD. (UK) [email protected] Phone +44(0) 1234 349191 Unit 3, Bedford Business Centre Fax +44(0) 1234 268955 Mile Road Bedford MK42 9TW UK EV551_UPS Brochure © Magnetek, Inc. 2015