Unit Cooler Tc Series Nz 2015

Transcript

Dual Discharge Cabinet Coolers n Optimised 3/8” Rifle Bore Tube Coils n Easy clean white ABS tray and colour steel case n Extremely low profile n Factory Applied “Blue Coil Coat” Corrosion Protection n 15mm PVC Drain Connection TC 0.3 1.7 kW SERIES MEDIUM TEMP MODELS TCM 03 04 06 08 10 12 16 R404A 0.36 0.48 0.69 0.84 0.99 1.29 1.65 Capacity kW @ 6 KTD -4°C SST R407F 0.39 0.51 0.72 0.90 1.02 1.35 1.74 R22 0.33 0.45 0.66 0.81 0.96 1.26 1.62 T.X Valve R404A XS2 XS2 XS2 0S2 E-0S2 E-1S2 E-0S2 T2-S / TE2-S XX2 XX2 XX2 E-XX2 E-0X2 E-0X2 XX2 XX2 XX2 E-XX2 E-0X2 E-0X2 XN2 XN2 0N2 E-0N2 E-0N2 E-1N2 www.pattonnz.com R407F XX2 R22 XX2 R134a XN2 TC SERIES R134a 0.33 0.45 0.60 0.75 0.90 1.17 1.50 DIMENSIONS 2 100 (MIN. FOR AIRFLOW A 4 3 6 5 100 (MIN. FOR AIRFLOW L (OVERALL LENGTH) 7 8 50 (NOM. FOR DRAIN TRAY REMOVAL) D (OVERALL DEPTH) H (OVERALL HEIGHT) 1 AIR FLOW AIR FLOW B 21 DRAIN HOLE FOR SPIGOT AIR FLOW FRONT ELEVATION B 25 SIDE ELEVATION C C NTS (mm) MODELS TCM03 TCM04, 06, 08 TCM10 TCM12, 16 DIMENSIONS D L 604 604 604 804 D 386 386 386 466 H 156 178 200 208 D ISOMETRIC VIEWS E MEDIUM TEMP MODELS F A TCM Air Volume l/sec Fan Motors Num. Ø 254mm 03 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: 04 06 FINISH: 08 REFER TO TC SERIES DETAIL DRAWINGS DEBUR AND BREAK SHARP EDGES DO NOT SCALE DRAWING 10 12 REVISION: - 16 180 220 PROPRIETARY AND CONFIDENTIAL220 200 230 260 300 NAME DRAWN THE DRAWING AND INFORMATION CONTAINED SIGNATURE DATE TITLE: TC SERIES GA CAMERON W. CHK'D RAY K. APPV'D CRAIG P. HEREIN ARE THE EXCLUSIVE PROPERTIES OF 1 1 1 1 1 PATTON LIMITED. IT SHALL BE RETURNED UPON DEMAND AND SHALL NOT BE REPRODUCED IN WHOLE OR IN PART, DISCLOSE TO ANYONE ELSE MFG MATERIAL: A3 OR USED WITHOUT THE WRITTEN CONSENT OF REFER TO TC SERIES Ø 300mm 1 1 PATTON LIMITED PL01-ASM-TC01 - REVISED BY REV - DESCRIPTION 1 2 Watts ECN - DD-MM-YY ECN NO. DATE Q.A DWG NO. DETAIL DRAWINGS 17-JAN-2012 3 4 APPROX WEIGHT: 6.0-13.5Kg SCALE: CUT SIZE: SHEET 12 16 16 16 16 25 251 OF 1 Amps 0.24 0.45 0.45 0.45 0.45 0.68 0.68 Coil Circuit Vol. dm3 0.32 0.49 0.61 0.81 0.98 1.53 1.83 Connection Dist Inlet 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” F.Sw Suct Outlet 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” Dimensions fpi 8 8 8 8 8 8 8 mm L 604 604 604 604 604 804 804 D 386 386 386 386 386 466 466 H 156 178 178 178 200 208 208 kg 6.0 7.4 7.5 8.5 9.2 12.5 13.5 Net Weight CAPACITY CORRECTION TCM @ °C SST RELATIVE HUMIDITY GUIDE Temp Diff R.H % Temp Diff R.H % 5° 1.17 2K 94 10K 77 0° 1.07 4K 89 12K 73 -5° 0.99 6K 84 14K 70 -10° 0.93 8K 81 16K 66 Specifications subject to change without notice www.pattonnz.com NOTES: 1. Fan motors 220-240V/1/50Hz The company reserves the right to make specification changes without notice. 18/05/15 RAY K. Dual Discharge Cabinet Coolers n Optimised 3/8” Rifle Bore Tube Coils n Easy clean white ABS tray and colour steel case n Extremely low profile n Factory Applied “Blue Coil Coat” Corrosion Protection n 15mm PVC Drain Connection TC 0.3 1.7 kW SERIES MEDIUM TEMP MODELS TCM 03 04 06 08 10 12 16 R404A 0.36 0.48 0.69 0.84 0.99 1.29 1.65 Capacity kW @ 6 KTD -4°C SST R407F 0.39 0.51 0.72 0.90 1.02 1.35 1.74 R22 0.33 0.45 0.66 0.81 0.96 1.26 1.62 T.X Valve R404A X-SW X-SW 0-SW 0-SW E-0-SW E-0-SW E-1-SW TIS R407F X-HW X-HW 0-HW 0-HW E-0-HW E-0-HW E-0-HW R22 X-HW X-HW 0-HW 0-HW E-0-HW E-0-HW E-0-HW R134a X-MW X-MW 0-MW 0-MW E-0-MW E-0-MW E-1-MW www.pattonnz.com TC SERIES R134a 0.33 0.45 0.60 0.75 0.90 1.17 1.50 DIMENSIONS 2 100 (MIN. FOR AIRFLOW A 4 3 6 5 100 (MIN. FOR AIRFLOW L (OVERALL LENGTH) 7 8 50 (NOM. FOR DRAIN TRAY REMOVAL) D (OVERALL DEPTH) H (OVERALL HEIGHT) 1 AIR FLOW AIR FLOW B 21 DRAIN HOLE FOR SPIGOT AIR FLOW FRONT ELEVATION B 25 SIDE ELEVATION C C NTS (mm) MODELS TCM03 TCM04, 06, 08 TCM10 TCM12, 16 DIMENSIONS D L 604 604 604 804 D 386 386 386 466 H 156 178 200 208 D ISOMETRIC VIEWS E MEDIUM TEMP MODELS F A TCM Air Volume l/sec Fan Motors Num. Ø 254mm 03 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: 04 06 FINISH: 08 REFER TO TC SERIES DETAIL DRAWINGS DEBUR AND BREAK SHARP EDGES DO NOT SCALE DRAWING 10 12 REVISION: - 16 180 220 PROPRIETARY AND CONFIDENTIAL220 200 230 260 300 NAME DRAWN THE DRAWING AND INFORMATION CONTAINED SIGNATURE DATE TITLE: TC SERIES GA CAMERON W. CHK'D RAY K. APPV'D CRAIG P. HEREIN ARE THE EXCLUSIVE PROPERTIES OF 1 1 1 1 1 PATTON LIMITED. IT SHALL BE RETURNED UPON DEMAND AND SHALL NOT BE REPRODUCED IN WHOLE OR IN PART, DISCLOSE TO ANYONE ELSE MFG MATERIAL: A3 OR USED WITHOUT THE WRITTEN CONSENT OF REFER TO TC SERIES Ø 300mm 1 1 PATTON LIMITED PL01-ASM-TC01 - REVISED BY REV - DESCRIPTION 1 2 Watts ECN - DD-MM-YY ECN NO. DATE Q.A DWG NO. DETAIL DRAWINGS 17-JAN-2012 3 4 APPROX WEIGHT: 6.0-13.5Kg SCALE: CUT SIZE: SHEET 12 16 16 16 16 25 251 OF 1 Amps 0.24 0.45 0.45 0.45 0.45 0.68 0.68 Coil Circuit Vol. dm3 0.32 0.49 0.61 0.81 0.98 1.53 1.83 Connection Dist Inlet 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” F.Sw Suct Outlet 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” Dimensions fpi 8 8 8 8 8 8 8 mm L 604 604 604 604 604 804 804 D 386 386 386 386 386 466 466 H 156 178 178 178 200 208 208 kg 6.0 7.4 7.5 8.5 9.2 12.5 13.5 Net Weight CAPACITY CORRECTION TCM @ °C SST RELATIVE HUMIDITY GUIDE Temp Diff R.H % Temp Diff R.H % 5° 1.17 2K 94 10K 77 0° 1.07 4K 89 12K 73 -5° 0.99 6K 84 14K 70 -10° 0.93 8K 81 16K 66 Specifications subject to change without notice www.pattonnz.com NOTES: 1. Fan motors 220-240V/1/50Hz The company reserves the right to make specification changes without notice. 18/05/15 RAY K.