Unitronic_electronics-vorlage-nur Footer Auf Erster Und Letzter Seite

Transcript

YOUR STRATEGIC PARTNER FOR EMBEDDED SOLUTIONS ELECTRONICS UNITRONIC GmbH Mündelheimer Weg 9 40472 Düsseldorf Telefon 0211 / 95 110 Telefax 0211 / 95 11 111 [email protected] PART OF LAGERCRANTZ GROUP e best in class specification. The registered trademarks are proprietary of respective owners. For the latest in formation please check the website: www.iwavesystems.com Phone , 26786245 iW-Product-Catalog-BR-R1.8 INDEX Content 1 Page No. 1. About Us 2 2. Engineering Design Services 3 3. FPGA IP Cores 4 4. Microcontroller Expertise 5 5. Linux Expertise 6 6. Windows Embedded Compact 7 Expertise 7 7. Vx Works Expertise 8 8. Comparison of SODIMM SOM Modules 9 9. RZ/G1E SODIMM System On Module 10 10. RZ/G1E SODIMM Development Kit 12 11. i.MX6 SODIMM System On Module 14 12. i.MX6 SODIMM Development Kit 16 13. i.MX6UL SODIMM System On Module 18 14. i.MX6UL SODIMM Development Kit 20 15. Comparison chart for Q7 SOM’s 22 16. RZ/G1M,G1N Q7 System On Module 24 17. RZ/G1M Q7 Development Kit 26 18. i.MX6 Q7 System On Module 28 19. i.MX6 Q7 Development Kit 30 20. Cyclone V SOC Q7 System On Module 32 21. Cyclone V SOC Q7 Development Kit 34 22. DM8168 Q7 System On Module 36 23. DM8168 Q7 Development Kit 38 24. i.MX6 MXM System On Module 40 25. i.MX6 MXM Development Kit 42 26. RZ/G1E Pico ITX Single Board Computer 44 27. i.MX6 Pico ITX Single Board Computer 46 28. Arria 10 SoC System On Module 48 ABOUT US iWave looks back with pride at a decade and half of technological experience absorbing and resolving technical complexities that enables large corporations to focus on its core competencies and succeed by shortening their product development life cycle. iWave is a midsized, well-co-ordinated company located in Bangalore with 180 passionate staff. The company renders its expertise in diverse yet focused domains which include industrial, automotive and medical. iWave boasts of numerous IP's few of which can be licensed. Hardware IP's include System on Module (SOM) and Single Board Computer (SBC). Software IP's include Board Support Package (BSP) and NDIS drivers. Processor Cores, Peripheral Cores, Interface Cores, Storage Cores and Video Interface Cores are some of the FPGA IP core categories including legacy cores like x86 IP core. iWave's business model is flexible and strives to adapt to customer requirements. iWave recognized the opportunity in embedded industry to have a proven set of well-tested electronic sub-systems that could be reused across multiple products and industry segments. This realization led to the design of System on Modules (SOM). These well tested and proven industry standard modules helped our clients reduce the development cycle by almost 50% and cut down on the time to market. In terms of hardware design all the intricate electronics are integrated on to the SOM, which helps customers to focus only on application specific hardware design. Unlike our competitors, iWave provides customized BSP's (Board support packages) for Linux, Android and Windows Embedded Compact 7 platforms, which are developed in-house. This enables iWave to support its clients with the BSP's for various OS platforms in unison with the hardware. iWave is proud to be one of the few companies to pioneer solutions on the Qseven form factor. In a nutshell, iWave has the right set of experience, hardware, software, FGPA skills and business strategy to be a dependable technology partner. In addition to these compelling factors, iWave pursues on the path of continual quality improvement which constitutes to successful business. Domain Focus 2 Engineering Design Services Design Services Offered Hardware: Board Design services based on PRODUCT CUSTOMER Embedded Controllers/Processors/DSP that includes Low and High Speed Design, inhouse Multilayer PCB Design, Signal integrity & other required analysis and Testing. MARKET CONCEPT Our Strengths: With Very minimal / Zero Cuts and Straps in prototyping incorporating Design for Manufacturing (DFM) and Design for Testability (DFT). PRODUCTION DESIGN QUALITY ENGINEERING SAMPLES CERTIFICATION Processors: Wide experiencing in providing solutions using SOC’s like NXP, Renesas, TI, ARM, Altera, Xilinx, Microsemi and Windows Embedded. Concept to Market · i.MX6x, i.MX6UL, i.MX6 POP, Vybrid, MPC864x, i.MX27, i.MX257, i.MX258, i.MX233, i.MX50, i.MX51,i.MX53, PowerPC 860, 8260, 750/755 from Freescale/NXP · Keystone II, DM355/64xx, DSP TMS320C6455, OMAP 3530, AM4377x, DM8168, Cc2541, OMAP 850 from TI · ARMDA/PXA610, MC200, PXA255, PXA270 from Marvell, Atom Z5xx from Intel, AT91RM9200 from Atmel and RZ/G1M, SH4 from Renesas Software and Wi-Fi : Application Streaming TCP/IP GUI Frame Wi-Fi Stack Protocol Security Features Wi-Fi Features Open WEP 64/128Bit Wi-Fi station SoftAP (Hotspot) Wi-Fi Direct APIs WPA2 AES/TKIP WPA AES/TKIP Drivers Displays Video Camera Storage Bootloader 3 Wi-Fi Others FPGA IP Cores FPGA IP Cores: Processor Cores: 80186XL Processor 80188XL Processor 80188EB Processor 80186EC Processor Peripheral Cores: 8237 DMA Controller 8259A Interrupt Controller 8254 Programmable Timer 8251 Serial Controller 8530 Multi-Protocol Controller Storage Cores: SATA Host Controller SDXC Host Controller SD / SDIO / MMC Host Controller SD Memory Slave Controller SDIO Slave Controller NAND Flash Controller ATAPI Host Controller Interface Cores: PCIe-ISA Bridge iWave Systems is a leading FPGA design house with a wide range of FPGA IPs. iWave has catered to multiple customers across the globe by customizing and integrating the IPs, thereby reducing the effort, time to market and cost factors. iWave has a bundle of well tested and proven FPGA IP cores, which include Intel 80186 compatible Processor & peripheral cores, bus interfaces cores, video/multimedia cores and storage cores. All the FPGA IP cores provide standard and simple user interface for ease of use. Our FPGA services include Design/Development, Testing/Verification, Test suite development and RTL coding. We provide turnkey development services in FPGA for High Speed Bus interfaces, protocols and transceivers, Integration of modules, Multi-million gates PCIe to UART Bridge PCI Controller Serial FPDP (sFPDP) FPGA Design Service Case Studies: DMA Core for PCIe Hard IP PCIe to SD-MMC Bridge High resolution display controller SDIO to UART Controller Health care terminal Video Interface Cores: ARINC 818-2 Signalling control system Color Space Conversion Camera/HDMI Video Input Interface LCD/HDMI Video Output Interface Alpha Blender Video Encoder Interface Video Decoder Interface Video DeInterlacer Video Scaler Chroma Resampler Radio board development I-chart application Rear view camera Router Platform OC 48 Reference platform 4 Microcontroller Expertise 5 -------------------------------- -------------------------------CC 2541 based BLE sensor module -- --- --------- BLE 4.0 support 50Mb RAM 256Mb Flash SP02 sensor via SPI ------------------ ---------------------------------- ------------------ ---------- ARM7 TDMI based Reference platform LCD / Touch screen FPGA based logic Mp3 decoding, ADPCM CF and SD memory I/F c Linux with microwindows /PIM support ------------------ Synergy SK-S7G2 Healthcare Sensors MQTT, IoT protocol for cloud Ethernet Wi-Fi connectivity -------------------------------- ------------------ Renesas Synergy based Healthcare IoT ------------------ ------------------ ---------------------------------- ARM Cortex M4 + ARM Cortex A5 MCU MQX RTOS & Linux USB 2.0, LCD, ADC, DAC 256 Mb DDR3 RAM 256 Mb NAND Flash ----------------------------- ----- --------------------- ---------------------------------- ------------ ------ ------ ----- --------------------- ARM Cortex M3 512 KB SRAM 512 KB EPROM Flash up to 1 Mb ------------------ ------------------ ---------------------------------- ------ ----- -------------------------------88MC200 based M2M Communication Device ------ ------ ----------------------- Vybrid VF5xx/VF6xx SOM ----------- LED, GPIO, ADC, I2C, Reset In-Style Programming Flash Programming Custom protocol between PlC & i.MX6 ------------------- ------------------- PlC18F85J11 based project ----------------------- ----------------------------- -------------------------------- -------------------------------- Linux Expertise Linux Application Streaming Protocol TCP/IP GUI Frame APIs Linux Kernel Versions Linux 2.6.19/3.0.35/3.10.14/3.10.53/3.10.61 Linux Drivers Audio eMMC RTC DDR3 Touch DPRAM LVDS/ LCD QSPI NOR I2C SPI CAN SATA HDD SD Ethernet UART CSI/ MIPI Power Management Character LCD Wi-Fi USB Full speed/ High speed GPIO NAND Flash Bootloader Boot Medias MiniSD, MicroSD, Ethernet, QSPI NOR, NAND, USB and eMMC Processor Based Hardware Platform Developed Ported 6 Windows Embedded Compact Expertise WEC Application Win32/MFC Applicaton Silverlight GUI Apps Test Application WEC Device Drivers Audio eMMC RTC DDR3 Touch DPRAM LVDS/ LCD QSPI NOR I2C SPI GPIO SATA HDD CSI/ MIPI SD Ethernet UART Power Management Character LCD Wi-Fi USB Full speed/ High speed NAND Flash CAN E-Boot / U-Boot Loader Boot Medias SD,MicroSD,Ethernet,QSPI NOR,NAND and eMMC Windows Embedded Compact Versions WEC5.0/6.0/6.0R3/7.0/2013 Processor Based Hardware Platform NXP i.MX27 NXP i.MX51 Developed 7 NXP i.MX53 NXP i.MX6x Ported Altera Cyclone V SoC VxWorks Expertise VxWorks Application Test Application Windml RTP VxWorks OS Audio Out Compact Flash(CF) EEPROM Touch SRAM LVDS LCD I2C SPI GPIO GPMC QSPI NOR LED SWITCH SD Ethernet UART Seven Segment LED PRUICSS Ethernet VME Shared Memory Network Driver RTC HDLC Frame Protocol USB Full Speed/High Speed VxWorks Boot Loader Boot from QSPI NOR Flash Ethernet Boot from SD VxWorks Version VxWorks 6.6 VxWorks 6.9 VxWorks 5.51 Hardware Ti’s AM4337 NXP’s i.MX272 Developed Motorola’s 5110 Motorola’s MPC740 Ported 8 Comparison of SODIMM SOM Modules Features/SODIMM SOM CPU PMIC Graphics Core Hardware Codecs RAM i.MX6 Quad /Dual SODIMM SOM i.MX6 DL/Solo SODIMM SOM RZ/GIE SODIMM SOM i.MX6 Quad/Dual core Cortex A9 CPU @up to 1GHz i.MX6 Dual Lite/Solo core Cortex A9 CPU @up to 1GHz Renesas RZ/G1E Dual core Cortex A7 CPU @1GHz i.MX6 Ultra Lite Cortex A7 CPU @528MHz NXP PF0100 Discrete power regulators NXP PF3001 OpenGL ES2.0,OpenVG1.1 Power VR SGX540@260MHz - NXP PF0100 OpenGL ES3.0,OpenVG1.1 H.264 1080p encode and decode H.264 1080p encode and decode H.264 1080p encode and decode 1GB DDR3 RAM (expandable) 1GB DDR3 for DL CPU &512MB for solo CPU (expandable) 512MB DDR3 RAM (expandable) Flash Storage 4GB eMMC Flash(Expandable) 4GB eMMC Flash(Expandable) NOR Flash 2MB SPI NOR (expandable) 2MB SPI NOR (expandable) Micro SD* - - 4GB eMMC Flash(Expandable) i.MX6UL SODIMM SOM 256MB DDR3 (expandable) 256MB NAND flash(expandable) Optional eMMC Flash 2MB SPI NOR (expandable) QSPI Flash (Optional) On-Module Micro SD Slot On-Module Micro SD Slot* SODIMM edge connector Interfaces PCIe Ports PCIe Gen2.0 x 1 Port SATA Ports 1 Port Ethernet 10/100/1000 Mbps-1 Port PCIe Gen2.0 x 1 Port - - 10/100/1000 Mbps-1 Port 10/100/1000 Mbps-1 Port 10/100 Mbps-1 Port - 10/100 Mbps-2 Port USB 2.0 Host 1 Port 1 Port 1 Port - USB 2.0 OTG CSI 8-bit Camera Port 24 Bit RGB LCD IF 12S Audio 1 Port 1 Port 1 Port 2 Ports 1 Port 1 Port 1 Port 1 Port 1 Port SD 1 Port HDMI 1.4 1 Port 1 Port LVDS 1 Port 1 Port 1 Port (Optional) 1 Port 1 Port 1 Port 1 Port 1 Port 1 Port 1 Port 1 Port 1 Port Debug UART Data UART 3 Ports 3 Ports Up to 6 Ports 3 Ports CAN 2 Ports 2 Ports 2 Ports 2 Ports SPI I2C 2 Ports 2 Ports 2 Ports 1 Port PWM 4 Ports 4 Ports 3 Ports 2 Ports 3.3V, 2A Typical 3.3V, 2A Typical GPIOs JTAG Power Input 3.3V, 2.5A Typical Operating Temperature -40 C to +85 C Indstrial 0 C to +70 C Commercial Form Factor OS Support -40 C to +85 C Indstrial -40 C to +85 C Indstrial 0 C to +70 C Commercial 67.6mmx37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx29mm Linux 3.14.38, WEC7*, Android Lollipop 5.0.0 Linux 3.14.38, WEC7*, Android Lollipop 5.0.0 Linux 3.10.31, Android Kitkat 4.4.2* Linux 3.14.38 Note: * Optional features are not supported by default 9 3.3V, 1A Typical -40 C to +85 C Indstrial 0 C to +70 C Commercial System On Module iW-RainboW-G22M-SM RZ/G1E SODIMM Module iWave’s RZ/G1E based SODIMM system on module integrates power efficient ARM Cortex A7 Dual core operating @ 1GHz speed. The SOM packed with rich set of features and IO peripherals. It integrates HD hardware codecs, 3D graphics acceleration, DDR3 RAM, eMMC flash, Micro SD slot, Gigabit and 10/100 Ethernet PHY. The SOM is ideally suitable for low power cost effective general embedded, industrial and video intensive applications. APPLICATIONS: HMI & Access Control, Digital Signage, Industrial Control, IOT gateway, Healthcare devices, Point of sale, Network & high vision camera, Home & Office automation and White goods & applicances. iW-RainboW-G22M-SM HIGHLIGHTS Dual Core ARM Cortex-A7 @ 1GHz Dual channel HD encode & decode Built in SGX540 3D Graphic acceleration Dual On-SOM Ethernet PHY SPECIFICATIONS CPU Renesas’s RZ/G1E CPU @ 1GHz Dual Core ARM Cortex A7 SGX540 Graphic Core @ 260MHz Memory 1 512MB DDR3 (Expandable to 2GB ) 4GB eMMC Flash (Expandable )1 2MB SPI NOR Flash (boot code) Micro SD slot (Optional) Communication Gigabit Ethernet PHY - 1 Port Industrial temperature support available Compact SODIMM form factor Quick time to market Technical & Quick customization support Long term support: 10+ years 10/100 Ethernet PHY - 1 Port SODIMM Edge Interfaces Debug USRT - 1 Port 10/100/1000 Ethernet - 1 Port 2 10/100 Ethernet - 1 Port 24bpp RGB display - 1 Port 8-bit CMOS Camera - 1 Port 2 2 SD(4-bit) - 1 Port USB2.0 host - 1 Port USB2.0 device - 1 Port DATA UART - up to 6 Ports CAN - 2 Ports I2S audio - 1 Port PWM - 2 Nos I2C - 2 Ports SPI - up to 2 Ports PWM & GPIOs JTAG Port Temperature -40°C to +85°C Industrial Form Factor 67.6mm x 37mm SODIMM Power Input 3.3V @ 2A through SODIMM Edge Operating Systems : Linux 3.10.31 Note1: By default 512MB DDR3 and 4GB eMMC only supported. Contact iWave systems for memory expansion support. Note2: 10/100 Ethernet RMII and 8-bit camera interface is multiplexed in the CPU. At a time anyone can be used. By default 8-bit camera interface is supported in the SOM. 10 RZ/G1E SODIMM SOM BLOCK DIAGRAM DDR3 (32bit) DDR3 - 512MB (Upgradable) GMII x 1 EtherAVB DBSC 100/1000Mbps 100/1000Mbps Ethernet Ethernet PHY 1,2 VI1 MMC eMMC - 4GB (Upgradable) EtherMAC/ VI1 MMC 100Mbps Ethernet PHY (Optional) RMII x 1 USB OTG x 1 USB0 QSPI SPI Flash - 2MB (Upgradable) 100Mbps 1 Ethernet USB Host x 1 QSPI USB1 SD (4bit) x 1 SDHI0 SODIMM PCB Edge Connector (200 Pin) RGB LCD (24bpp) x 1 Micro SD Connector SD (4bit) SDHI1 DU0 CPU RZ/G1E I2S x 1 SSI3/SSI4 CAN x 2 CAN0, CAN1 I2C3 RTC Controller VRTC HSCIF1, HSCIF2 SCIF1, SCIF2 SCIF3, SCIF5 UART (with CTS & RTS) x 2 UART x 4 Debug UART SCIF4 MSIOF1, MSIOF2 SPI x 2 I2C x 2 I2C3, I2C5 PWM x 3 TPU0, TPU2, TPU3 GPIOs GPIOs JTAG 2 JTAG Voltage Level Translator Power to Peripherals On - Board Regulators VRTC 3.3V 1 Since EtherMAC and VI1 multiplexed in CPU, either one only can be used at a time. By default VI1is supported. 2 Since VI1 and MSIOF1 are shared the same SODIMM Edge pins, either one only can be used at a time. By default VI1is supported. 11 OS SUPPORT DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT Linux 3.10.31 RZ/G1E SODIMM Module Board Support Packages User Manual RZ/G1E Development Kit Camera Module BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support Development platform iW-RainboW-G22D-SODIMM RZ/G1E SODIMM platform iWave’s RZ/G1E SODIMM development kit incorporates RZ/G1E SODIMM SOM which is based on Renesas power efficient Dual core ARM Cortex A7 CPU cores operating @1GHz speed. The development board can be used for quick prototyping of various applications targeted by the RZ/G1E processor. With the 100mm x 72 mm Pico ITX size, the kit is highly packed with all the necessary on-board connectors to validate the RZ/G1E CPU features. APPLICATIONS: HMI & Access Control, Digital Signage, Industrial Control, IOT gateway, Healthcare devices, Point of sale, Network & high vision camera, Home & Office automation and White goods & appliances. iW-RainboW-G22D-SODIMM HIGHLIGHTS SPECIFICATIONS Dual Core ARM Cortex-A7 @ 1GHz RZ/G1E SODIMM SOM: Renesas’s RZ/G1E CPU @ 1GHz SGX540 Graphics core @ 260MHz RGB display - 1 Port Resistive touch controller Hardware HD encode & decode 512 MB DDR3 4GB eMMC Flash CAN PHY - 1 Port Serial console on USB Port Built in SGX540 3D Graphic acceleration 10/100/1000 Ethernet PHY Micro SD Slot IO expansion headers JTAG header SODIMM Carrier board: Gigabit Ethernet - 1 Port Power Supply: 5V@2A DC Input USB 2.0 host - 2 Ports Operating Temperature: 4.3” display kit with resistive touch screen Ultra-compact form size 100mm x 72mm Data UART - 1 Port USB2.0 device - 1 Port 0 C to 60 C SD Slot - 1 Port OS Support: 8-bit CSI Camera - 1 Port Audio Codec, In/Out Jack Linux 3.10.31 Form Factor: 100mm x 72mm 12 RZ/G1E SODIMM Development Board Block Diagram SODIMM PCB Edge Connector (200pin) RTC Battery To On-Board Power Circuit & Peripherals 3.3V Power IN RTC SCIF4 Control Switches JTAG Header Micro SD Connector 6Pin CAN Header UART UART to USB Bridge Debug USB Micro AB Connector I2S I2S Audio Codec Audio In/Out Connector I2C5 Resistive Touch Controller RESET SSI3/SSI4 JTAG JTAG SDHI x 4bit CAN Transceiver CAN0 SDHI0 I2C5 CAN0 DU0 UART x 1 I2C5 100/1000Mbps USB TypeA Connector1 RJ 45 Mag Jack2 2 Port USB HUB 1 VI1 2 EtherAVB VI1/MSIOF1 USB1 HSCIF2, SCIF1,SCIF5 8bit Camera Connector (OV7725/OV5640) MSIOF1 USB1 UART x 3 CAN X 1 10/100Mbps 1 EtherMAC USB TypeA Connector2 USB Micro AB Connector 4.3” RGB LCD Connector PWM HSCIF1 RJ45 Mag Jack1 Resistive TP Connector 18bpp RGB TPUTO3 UART Header Power Jack (5V) 3.3V Power Regulator CAN1 TPUTO0 USB Device USB0 GPIO’s MSIOF2 20Pin Expansion Header PWM GPIOs 20Pin GPIO Header 1 Since EtherMAC and VI1 are multiplexed in RZ/G1E CPU, either one interface only can be supported in the RZ/G1E SOM. 2 Since VI1 and MSIOF1 are shared the same SODIMM Edge pins, either one interface only can be connected to the SODIMM Edge in the RZ/G1E SOM. OS SUPPORT Linux 3.10.31 13 DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT RZ/G1E SODIMM Development kit Board Support Package User Manual 4.3” RGB display Kit Camera Module BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development System On Module iW-RainboW-G15M-SODIMM i.MX6 SODIMM Module iWave's new i.MX6 Quad/Dual/Dual Lite/Solo ARM Cortex A9 cpu based SODIMM module integrates all standard interfaces into a single board with ultra compact yet highly integrated platform that can be utilized across multiple embedded PC, system and industrial designs. It has got all the necessary functions that the embedded world demands. APPLICATIONS : Intelligent Industrial Control Systems, Industrial Human-Machine interface, Ultra Portable Devices, Home Energy Management Systems, Portable Medical Devices. iW-RainboW-G15M-SODIMM HIGHLIGHTS ARM Cortex A9 @ 1GHz/800MHz Quad/Dual/Dual Lite/Solo core Modular & Compact SODIMM form factor- 67.6mm X 37mm HD 1080p encode and decode 2D/3D Hardware Graphics Acceleration Technical and quick customization support 10+ years, long term support CPU: i.MX6 Q/D/DL/S @1GHz/800MHz ARM-Cortex-A9 PMIC: MMPF0100 RAM: 1GB DDR3 for Q/D/DL (Expandable) 512MB DDR3 for Solo (Expandable) 2MB SPI NOR Flash (Expandable) 4GB eMMC Flash (Expandable) Communication: 10/100/1000 Ethernet PHY Power Input: 3.3V , 3.5A input through SODIMM edge Operating Temperature: -40°C to +85°C Industrial 0°C to +70°C Commerical Form Factor: 67.6mm X 37mm SODIMM Form Factor SODIMM Edge Connector Interfaces: PCIe x 1 UART x 3 10/100/1000Mbps Ethernet HDMI x 1 SATA x 1 * USB Host 2.0 x 1 USB OTG 2.0 x 1 SD (4bit) x 1 I2S Audio x 1 LVDS Display x 1 24bpp RGB Display x 1 8bit Camera x 1 I2C X 2 GPIOs PWM x 4 Debug UART Port JTAG Port Operating Systems: Linux 3.14.38, Android Lollipop5.0, WEC 7* Note: SATA support not available in i.MX6 DL/S Note: * Denotes Optional Features. [email protected] 14 i.MX6 SODIMM Module BLOCK DIAGRAM DDR3 RAM (512MB/1GB) DDR3(64 bit) SPI Flash (2 MB) SPI eMMC (4GB) MMC (8 bit) Gigabit Ethernet PHY eSDHC4 UART1 UART4 UART5 UART x 3 RGB LCD (24bpp) DISP0 LVDS LVDS CPU i.MX6Q Camera (8bit) CSI0 SD (4bit) eSDHC3 I2S x 1 AUDMUX4 I2C x 2 I2C1, I2C2 PCIe x 1 PCIe Bus SATA x 1 SATA II PWM x 4 PWM 1-4 Debug UART2 JTAG SJC Status & Control Signals Power to Peripherals 15 SODIMM PCB Edge Connector (200Pin) HDMI HDMI1.4 GPIOs 10/100/1000 Ethernet On-board PMIC 3.3V OS SUPPORT DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT Linux 3.14.38 Android Lollipop 5.0 WEC 7* i.MX6 SODIMM Module Board Support Packages User Manual i.MX6 Development Kit 4.3” LCD Display Kit Heat Spreader Camera Module BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support www.iwavesystems.com Development Platform iW-RainboW-G15D-SODIMM i.MX6 SODIMM Development Kit iWave's i.MX6 SODIMM development board incorporates i.MX6 SODIMM SOM Which is based on NXP's high performance i.MX6 Quad ARM Cortex A9 processor and the carrier board with optional 4.3” resistive display kit. The development board can be used for quick prototyping of various applications targeted by the i.MX6 processors. With the 100mm x72 mm Pico ITX size, the kit is highly packed with all the necessary on-board connectors to validate the i.MX6 CPU features. APPLICATIONS: Industrial HMI and Access Control, Industrial Control and Automation, Medical and Healthcare Equipment, Infotainment and Digital Signage, Portable Embedded Devices, White Goods and Smart Appliances. iW-RainboW-G15D-SODIMM HIGHLIGHTS High Performance Quad Cortex A9 CPU @ 1GHz Gigabit Ethernet, PCIe, SATA, LVDS, HDMI High Speed Interface Support 4.3" Display Kit with Resistive touch screen Ultra Compact form size 100mm X 72mm i.MX6Q SODIMM SOM: i.MX6Q Cortex A9 CPU @ 1GHz PF0100 PMIC 1GB DDR3 4GB eMMC Flash 10/100/1000 Ethernet PHY SODIMM Carrier Board: HDMI - 1 Port SATA - 1 Port Gigabit Ethernet - 1 Port Half Mini PCIe - 1 Port LVDS Display - 1 Port USB 2.0 Host - 2 Ports1 USB 2.0 OTG - 1 Port 1 Micro SD Slot - 1 Port 4.3" RGB LCD Display2 Resistive Touch Controller Audio Codec, In / Out Jack 8 - Bit CSI Camera Port Serial Console on USB Port Data UART - 1 Port CAN PHY - 1 Port IO Expansion Headers JTAG Header OS Support: Linux 3.14.38 Android Lollipop 5.0.0 Power Input: 5V @ 2A DC Input Operating Temperature: 0°C to +60°C Form Factor: Pico ITX : 100mm x 72mm nd Compatible with Cortex A7 i.MX6UL SODIMM SOM [email protected] Note1: 2 USB Host Port and USB OTG Port is Multiplexed. Anyone can be used at a time. Note2: 4.3" Display Kit is Optional Feature. 16 i.MX6 SODIMM Development Board Block Diagram To On -Board Power Circuits &Peripherals I2C1 RTC Controller* RTC Battery* RTC Control Switches Boot Mode, USB Select, ONOFF, RST JTAG JTAG Header JTAG 3.3V Power IN UART Debug UART I2S I2S SDHC Camera UART0 RJ45 Mag Jack1 10/100/1000 Mbps 2 Port USB HUB Mini PCle Connector 18bpp RGB USB Host / USB OTG2 USB Host / USB OTG2 I2C2 HDMI HDMI UART1, UART2 PCle x 1 CAN2 Ethernet2 SPI USB OTG1 HDMI Connector Data UART1,Data UART2 PWM2 USB OTG1 CAN2 SPI Expansion Header PWM2 GPIO’S GPIO’S USB Micro AB Connector Capacitive TP Connector* I2C2 10/100/1000 Mbps USB Switch Generic RGB LCD Connector PWM3 I2C1 PCle x 1 USB Type A Connector2 Resistive TP Connector Resistive Touch Controller 18bpp RGB UART0 OV7725 Camera Connector LVDS LCD Connector and BKLT Conn PWM1 CAN1 Ethernet1 USB Type A Connector1 Audio IN/OUT Connector LVDS PWM1 I2C1 UART Header I2S Audio Codec I2C1 I2C1 CAN1 CAN Transceiver CAN Header Power Jack (5V) Debug USB Micro AB Connector LVDS SATA SDHC x 4 bit Micro SD Connector 3.3V Power Regulator UART to USB Bridge Camera x 8 bit SATA 22 Pin SATA Connector RJ45 Mag Jack2 SODIMM PCB Edge Connector (200 Pin) GPIO Header Note: * Denotes Optional Features. OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 3.14.38 Android Lollipop 5.0.0 WEC 7 * i.MX 6Q SODIMM Development Kit Support Board Package Hardware & Software User Manuels 4.3" RGB LCD Display Kit Camera Modules BSP Development/OS Porting Custom SOM /Carrier development Custom application /GUI development Design review and support 17 www.iwavesystems.com System On Module iW-RainboW-G18M-SM i.MX6UL SODIMM Module iWave's i.MX6UL based SODIMM CPU module integrates power efficient high performance ARM Cortex A7 CPU core operating up to 528MHz speed. The SOM is ultra-compact in size and integrated with on-board PMIC, Flash, DDR3 and dual Ethernet PHY. The SOM is ideally suitable for the cost & power optimized general embedded and industrial applications. APPLICATIONS: Industrial HMI, Access Control, Mobile POS, Secure e-commerce, Energy Management, IOT gateway, Industrial control & automation, Medical & Healthcare equipment, White goods and Smart appliances iW-RainboW-G18M-SM HIGHLIGHTS Power efficient Cortex-A7 @ 528MHz Compatible with Cortex A9 i.MX6Q/D/S SODIMM SOM Ultra Compact form factor 67.6mm X 29mm CPU: i.MX6UL1/2/3 @ 528MHz ARM Cortex A7 Core PMIC: PF3001 RAM: 256MB DDR3 (Expandable) 256MB NAND Flash (Expandable) Micro SD Slot (Optional) eMMC Flash (Optional) QSPI Flash (Optional) Power Input: 3.3V @ 1A through SODIMM Edge Operating Temperature: 0°C to +70°C Commercial -40°C to +85°C Industrial Form Factor: 67.6mm x 29mm 1 1 1 Advanced hardware enabled security PMIC with DVFS support Industrial temperature support available SODIMM Edge Interfaces: Debug UART Data UART - 2 Ports CAN - 2 Ports SD(4-Bit) - 1 Port 2 10/100 Ethernet - Up to 2 Ports USB OTG - 2 Ports 24bpp RGB display port 8Bit Parallel Camera Port I2S Audio or JTAG I2C Port PWM - 2 Ports GPIOs Boot mode signals Operating System: Linux 3.14.38 Note1: At a time either NAND Flash or eMMC & QSPI flash or µSD & QSPI flash can be used in the SOM. By default NAND Flash is supported. Note2: Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface. Technical and quick customization support 10+ years, long term support [email protected] 18 i.MX6UL SODIMM Module BLOCK DIAGRAM DDR3 RAM (256MB) DDR3 (16bit) NAND Flash 1 (256MB) NAND (8bit) QSPI 1 (Optional) QSPI (4bit) eMMC 1 (Optional) MMC (8bit) µSD Connector 1 (Optional) RMII ENET1 MMDC RAWNAND/ µSDHC2/ QSPI_A RMII ENET2 CPU i.MX6UL 10/100Mbps Ethernet 2 2 USB OTG1 USB OTG1 HS PHY USB OTG2 HS PHY SAI2/ JTAG USB OTG2 I2S SODIMM PCB Edge Connector (200Pin) JTAG RGB LCD (24bpp) LCDIF Camera (8bit)/eCSPI x 2 CSIO SD (4bit) µSDHC1 CAN x 2 FLEXCAN1, FLEXCAN2 Debug UART UART1 2 Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface. 10/100Mbps Ethernet PHY 10/100Mbps Ethernet RMII/DATA UART x 3/Keypad (4x4) SD (4bit) 1 At a time either NAND Flash or eMMC & QSPI flash or µSD & QSPI flash can be used in the SOM.By default NAND Flash is supported. 10/100Mbps Ethernet PHY DATA UART x 3 (with CTS & RTS) UART2, 3, 5 I2C x 1 I2C1 PWM x 2 PWM4, PWM5 Tamper/ GPIOs Tamper/GPIOs Power to Peripherals On-board PMIC 3.3V OPTIONAL /MODULES Linux 3.14.38 19 i.MX6UL SODIMM Module Board Support Packages User Manual i.MX6UL Development Kit 4.3" LCD Display Kit Camera Module BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support Development Platform iW-RainboW-G18D i.MX6UL SODIMM Development Board iWave's i.MX6UL development board incorporates i.MX6UL SODIMM SOM which is based on power efficient i.MX6UL ARM Cortex A7 processor and the carrier board with optional 4.3" resistive display kit. The development board can be used for quick prototyping of various applications targeted by the i.MX6UL processor. With the 100mm x 72mm Pico ITX size, and the kit is highly packed with all the necessary on-board connectors to validate the iMX6UL CPU features.. APPLICATIONS: Industrial HMI & Access Control, Mobile POS & Secure e-commerce, Energy Management & IOT gateway, Industrial control & automation, Medical & Healthcare equipment and White goods and Smart appliances. iW-RainboW-G18D-SODIMM HIGHLIGHTS Power efficient Cortex-A7 @ 528MHz Advanced hardware enabled security PMIC with DVFS support CPU: NXP’s i.MX6UL2/3 @ 528MHz ARM Cortex A7 Core PMIC: PF3001 Memory: 256MB DDR3 256MB NAND Flash Power Input: 5V @ 1A DC Input Operating Temperature: 0°C to +60°C Form Factor: 100mm x 72mm IO Ports Support: USB 2.0 Host - 2 Ports USB 2.0 device - 1 Port 10/100 Ethernet - 2 Ports 4.3" LCD with resistive touch1 Resistive touch controller Micro SD Slot Audio Codec, In/Out Jack 8Bit CSI Camera Port3 Serial Console on USB Port CAN PHY - 1 Port 2 JTAG Header RTC Coin Cell Boot mode Switch ON/OFF, Reset Switch Expansion Header: 3 UART x 2, CAN2, SPI Operating System: Linux 3.14.38 Note1: 4.3" Display kit is optional feature. Note2: JTAG is multiplexed with Audio. By default audio is supported. Note3: Since CSI and SPI are multiplexed in CPU, either one interface only can be used at a time. 20 i.MX6UL SODIMM DEVELOPMENT BOARD BLOCK DIAGRAM RTC Controller (Optional) I2C1 RTC Battery Holder SDHC x 4bit CAN Header CAN Transceiver Debug USB Micro AB Connector UART to USB Bridge CAN1 Debug UART UART Header Data UART CAN2 SPI 20Pin GPIO Header SAI2/JTAG I2S 3.3V Power Regulator Power Jack (5V) I2S Audio Codec Audio In/Out Connector JTAG µSDHC1 Data UART 20Pin Expansion Header To On-Board Power Circuit & Peripherals Power IN Boot Mode, ONOFF,RST Control Switches Micro SD Connector i.MX6UL SODIMM PCB Edge Connector (200Pin) 3.3V RTC GPIOs 1 JTAG Header (Optional) Camera x 8Bit Camera OV7725 Camera Connector CAN1 Capacitive TP Connector(Optional) UART1 I2C1 I2C1 18bpp RGB UART5 PWM4 Ethernet1 Resistive Touch Controller 18bpp RGB 10/100Mbps RJ45 MagJack1 UART2 CAN2 USB_HUBP1 USB OTG2 2 Port USB HUB USB Type A Connector1 USB_HUBP2 USB Type A Connector2 SPI GPIO’S RGB LCD Connector DISP_BL Ethernet2 10/100Mbps USB Device USB OTG1 RJ45 MagJack2 USB Micro AB Connector Note1: JTAG is multiplexed with Audio. By default audio is supported. OPTIONAL KITS/MODULES Linux 3.14.38 21 i.MX6UL SODIMM Development Kit Board Support Packages User Manual 4.3" RGB LCD Display Kit Camera Module BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support Comparison of Q7 SOM Modules Feature/Q7 SOM CPU Graphics Core Hardware Codecs RAM Flash Storage RZ/G1M Renesas’s RZ/G1M CPU @1.5 GHz, Dual Core ARM Cortex A15 SGX544MP2 Graphic Core @ 520MHz H.264 1080p@ 60 decode, H.264 1080p 60 encode 1GB DDR3 RAM (Expandable to 4GB *) 4GB eMMC (Expandable *) NOR Flash 2MB SPI Flash (For Boot Code) Micro SD* On-Module Micro SD Slot RZ/G1N i.MX6 QP/DP i.MX6 Quad/Dual Renesas’s RZ/G1N CPU @1.5 GHz, Dual Core ARM Cortex A15 NXP i.MX6 Quad Plus/Dual Plus ARM Cortex A9 @1GHz NXP i.MX6 Quad/Dual ARM Cortex A9 @1GHz SGX544MP2 Graphic Core @ 312MHz OpenGL ES3.0, OpenVG1.1 OpenGL ES3.0, OpenVG1.1 H.264 1080p@ 60 decode, H.264 1080p 60 encode 512GB DDR3 RAM (Expandable to 2GB *) H.264 1080p@ 60 decode, H.264 1080p 30 BP encode 1GB DDR3 RAM (Expandable to 4GB *) H.264 1080p@ 60 decode, H.264 1080p 30 BP encode 1GB DDR3 RAM (Expandable to 4GB *) 4GB eMMC (Expandable *) 4GB eMMC (Expandable *) 4GB eMMC (Expandable *) 2MB SPI Flash (For Boot Code) 2MB SPI Flash (For Boot Code) 2MB SPI Flash (For Boot Code) On-Module Micro SD Slot On-Module Micro SD Slot On-Module Micro SD Slot Muxed with USB3.0 Port PCIe 2.0 x 1 Lane Muxed with USB3.0 Port SATA 2.0 x 1 Port Qseven Edge Connector Interfaces PCIe Ports PCIe 2.0 x 1 Lane SATA Ports Muxed with PCIe Port 10/100/1000 Ethernet Ethernet No HDMI 1 Port LVDS 1 Port USB 3.0 Host 2 Ports USB 2.0 Host 1 Port USB 2.0 OTG I2S Audio Audio 1 Port SD/MMC 2 Ports PWM Debug UART Data UART CAN SPI 2 Ports I2C GPIOs X 8 Expansion Connector Interfaces * CSI Camera Port MIPI CSI MIPI DSI 24 Bit RGB LCD IF Gigabit Ethernet UART 16 Bit Memory Bus Key Matrix SSI/I2/SPDIF ESAI MLB SPI I2C CAN PWM GPIO Power Input Operating Temperature Form Factor OS Support Up to 3 Ports 10/100/1000 Ethernet No 1 Port 1 Port 2 Ports 1 Port I2S Audio 1 Port 2 Ports 2 Ports Up to 3 Ports No No No No No 2 Ports No 2 Ports No I2Sx1 Port No No I2Sx1 Port No 1 Port No 1 Port 2 Ports 10/100/1000 Ethernet SATA 2.0 x 1 Port 10/100/1000 Ethernet 1 Port 1 Port 2 Ports No 4 Ports 1 Port 2 Ports AC97/I2S Audio 1 Port 2 Ports 2 Ports 2 Ports No 4 Ports 1 Port AC97/I2S Audio 1 Port 2 Ports 2 Ports 2 Ports No No 3 Ports 3 Ports 3x3 Matrix 3x3 Matrix SPDIFx1 Port SPDIFx1 Port No No 1 Port No No No 1 Port 2 Ports 1 Port No 1 Port 1 Port No 1 Port 5V, 2A Typical 5V, 2.5A Typical -40 C to +85 C -40 C to +85 C -40 C to +85 C 70mmx70mm Qseven R2.0 Compatible Linux 3.10.31, Android KitKat 4.4.2 * 70mmx70mm Qseven R2.0 Compatible Linux 3.10.31, Android KitKat 4.4.2 * 5V, 2.5A Typical PCIe 2.0 x 1 Lane 70mmx70mm Qseven R2.0 Compatible Linux 3.14.28,Android 5.0 Lollipop, WEC7* 5V, 2A Typical -40 C to +85 C & 0 C to + 70 C 70mmx70mm Qseven R2.0 Compatible Linux 3.14.28,Android 5.0 Lollipop, WEC7 22 i.MX6 Dual Lite i.MX6 Solo NXP i.MX6 Dual Lite ARM Cortex A9 @ 1GHz NXP i.MX6 Solo ARM Cortex A9 @1GHz OpenGL ES2.0, OpenVG1.1 OpenGL ES2.0, OpenVG1.1 Cyclone V SOC Cyclone V SoC, Dual ARM CortexA9 HPS + FPGA up to 110K LEs No OpenGL ES2.0, OpenVG1.1 OpenGL ES2.0, OpenVG1.1 No H.264 1080p@ 60 decode & encode H.264 720p@ 30 decode & H.264 D1 @ 30 encode 1GB DDR3 SDRAM 128MB DDR2 RAM (Expandable up to 512 MB *) 128MB +NAND Flash Expandable up to 2GB H.264 1080p@ 30 + D1 decode,H.264 1080p 30 BP encode 512GB DDR3 RAM (Expandable to 2GB *) 4GB eMMC (Expandable *) 4GB eMMC (Expandable *) 16MB QSPI Flash* (Expandable) 2MB SPI Flash (For Boot Code) 2MB SPI Flash (For Boot Code) EPCQ/QSPI Flash * for FPGA On-Module Micro SD Slot i.MX51 Freescale i.MX51 ARM Cortex A8 @800MHz H.264 1080p@ 30 + D1 decode,H.264 1080p 30 BP encode 1GB DDR3 RAM (Expandable to 4GB *) On-Module Micro SD Slot DM 8168 TI DM8168 ARM Cortex-A8 CPU @1.2 GHz + C674x DSP @1GHz 512GB DDR3 with ECC HPS, 256MB DDR3 for FPGA On-Module Micro SD Slot (default boot) 128MB NAND Flash (Expandable*) No No On-Module Micro SD Slot (default boot) On-Module Micro SD Slot Qseven Edge Connector Interfaces PCIe 2.0 x 1 Lane No PCIe 2.0 x 1 Lane No PCIe Gen1 x 4 Lane PCIe 2.0 x 2 Lane No SATA2.0 X 1 Port SATA 2.0 x 2 Port No 10/100/1000 Ethernet 10/100/1000 Ethernet 10/100/1000 Ethernet 1 Port 1 Port No 1 Port 2 Ports 2 Ports 2 Ports No 4 Ports 1 Port No 4 Ports 1 Port No 4 Ports No AC97/I2S Audio 1 Port 1 Port No 4 Ports 1 Port AC97/I2S Audio 1 Port 2 Ports AC97/I2S Audio 1 Port 2 Ports 2 Ports 10/100/1000 Ethernet No 1 Port 2 Ports No 10/100 Ethernet No 1 Port No 4 Ports 1 Port AC 97 Audio 1 Port 2 Ports No No 2 Ports 2 Ports 2 Ports 2 Ports 2 Ports Expansion Connector Interfaces * 2 Ports 2 Ports No No 3 Ports 3 Ports 3x3 Matrix 3x3 Matrix SPDIFx1 Port SPDIFx1 Port No 2 Ports 1 Port No No No No No No No No 1 Port No No No No No No No No No 1 Port No 1 Port 1 Port No 1 Port 2 Ports No 4x4 Matrix 2 Ports 4x4 Matrix I2Sx2 Ports I2Sx2 Ports No No No No No No No No No No No No 5V, 1A Typical 5V, 1A Typical 5V, 2A Typical 5V, 2A Typical 5V, 1A Typical -40 C to +85 C & 0 C to + 70 C -40 C to +85 C & 0 C to + 70 C -40 C to +85 C 0 C to +70 C -40 C to +85 C 70mmx70mm Qseven 70mmx70mm Qseven R2.0 Compatible R2.0 Compatible Linux 3.14.28,Android Linux 3.14.28,Android 5.0 Lollipop, WEC7 5.0 Lollipop, WEC7 Note: * Optional features are not supported by default 23 No No 1 Port No No LVDS &SE IOs No 70mmx70mm Qseven R2.0 Compatible Linux 3.10 70mmx70mm Qseven R2.0 Compatible Linux 2.6.37 70mmx70mm Qseven R2.0 Compatible Linux 2.6.31, WinCE 6.0 System On Module iW-RainboW-G20M-Q7 RZ/G1M,G1N Qseven Module iWave’s RZ/G1M,G1N based Qseven CPU module integrates high performance ARM Cortex A15 Dual CPU core operating up to 1.5 GHz speed. The SOM is packed with rich set of features and IO peripherals. It integrates HD Hardware codecs, graphic acceleration, on-board PMIC, eMMC flash, DDR3 RAM, Micro SD slot, USB Hub and Gigabit Ethernet PHY. The SOM is ideally suitable for high performance general embedded, industrial and video intensive applications. APPLICATIONS: HMI & Access Control, Video Surveillance, Digital Signage, Entertainment, Industrial control, Point of sale & ATM, Vehicle infotainment & Navigation, Real time image recognition, Network & high vision camera, Home & office automation, White goods and Smart appliances. iW-RainboW-G20M-Qseven HIGHLIGHTS Dual core ARM Cortex A15 @ 1.5GHz Qseven R2.0 Compatible Dual channel HD encode & decode Built in HW Graphic acceleration Three channel video input USB3.0 support Industrial temperature support available Technical and quick customization support 10+ years, long term support CPU: Renesas’s RZ/G1M,G1N CPU @ 1.5GHz Dual core ARM Cortex A15 SGX544MP2 Graphic core @ 520MHz M emory: 1GB DDR3 (Expandable) 2 2MB SPI NOR Flash (For boot code) 4GB eMMC Flash (Expandable) 2 Micro SD Slot (Optional) Qseven Edge Interfaces: 1 PCIe - 1 Port USB3.0 host - 1 Port USB2.0 host - 2 Ports USB2.0 device - 1 Port LVDS Display - 1 Port Gigabit Ethernet - 1 Port SDHC - 1 Port I2S Audio - 1 Port I2C-2 Ports, SPI, CAN UART, PWM-2 Ports, GPIOs JTAG or UART console 1 Expansion Connector Interfaces: 24bpp RGB LCD or 16bit camera I/F 24bit camera or dual 8bit camera IF 8bit camera interface UART - 2 Ports Memory bus interface SPI/UART & CAN SSI/I2S Audio PWM-2 Ports, GPIOs Communication: Gigabit Ethernet PHY - 1 Port 2 Port USB HUB OS Support : Linux 3.10.31, Android KitKat 4.4.2* Power Input: 5V @ 2A through Qseven Edge Operating Temperature: -40°C to +85°C Industrial Form Factor: 70mm x 70mm, Qseven R2.0 compatible Note1: For RZ/G1N module configuration, Graphic core speed is 312MHz and PCIe support is not available by default. Note 2: By default 1GB DDR3 and 4GB eMMC only supported. Contact iWave for memory expansion support. 24 RZ/G1M,G1N Qseven SOM BLOCK DIAGRAM DDR3 (32bit) DDR3L - 1GB (Upgradable) SPI Programming Header (Op onal) DDR3 (32bit) SPI Flash - 2MB (Upgradable) SPI eMMC - 4GB (Upgradable) MMC (8bit) SD (4bit) Camera(16/24bit) x 1 (or) Camera (8bit) x 2 UART x 1 Memory Bus (16bit Sync/Async) CAN x 1 SSI/I2S x 1 Expansion Connector2 (80Pin header) DBSC3-CH1 USB3.0/SATA0 QSPI MMC/SDHI3 MMC/SDHI3 PWM x 1 USB0 I2S x 1 GMII x 1 EtherAVB 3 CPU RZ/G1M, RZ/G1N I2C2,I2C5 MSIOF2 SPI x 1 (2 Chip selects) CAN x 1 CAN0 MSIOF1 SCIFB1 SCIF1/4 HSCIF1 GPIOs 25 (230Pin) I2C x 2 UART (with CTS & RTS) x 1 8 GPIOs, Status & Control Signals PWM1 UART x 1 • Dual SPDT Switch IC (Op onal) Debug VRTC JTAG JTAG Power to Peripherals /MODULES RZ/G1M,G1N Qseven Module Board Support Packages User Manual QSEVEN Connector Note: Green Font blocks are not supported in RZ/G1N CPU Linux 3.10.31 Android KitKat 4.4.2* Gigabit Ethernet SDHC (4bit) x 1 SDHI2 LBSC 4 Gigabit Ethernet PHY PCB Edge CAN1 SSI3/SSI4 USB Host x 2 PWM x 2 SDHIO SCIF4 2 USB3.0 x 1 LVDS x 1 SSI0/SSI1 VI0,VI2 1 (2 Ports) PWM3,PWM5 DU1,VI1 PCIe x 11 SATA x 1 USB2.0 OTG x 1 SCIF0 1 PCIe is supported by default. SATA1 is not supported by default. 2 USB3.0 is supported by default. SATA0 is not supported by default. 3 SCIF4 cannot be supported if VI1 16bit camera is used. 4 HSCIF1’s ow control signals and MSIOF1 are multiplexed and either one only can be used at a time. • • • •USB2.0 HUB LVDS-DU0 SPI x 1 UART x 2 USB OTG USB1 VRTC LCD(24bpp) x 1 & Camera(8bit) x 1 (or) Camera (16bit) x 1 Expansion Connector1 (80Pin header) PCIe/SATA1 I2C2 RTC Controller Micro SD Connector DBSC3-CH0 RZ/G1M,G1N Qseven Development Kit JTAG (Op onal) (20 Pin Header) On-Board Regulators 5V 2Pin Power In (Op onal) Development Platform iW-RainboW-G20D-QSeven RZ/G1M Q7 Development Kit iWave's RZ/G1M development board incorporates RZ/G1M QSeven SOM which is based on Renesas high performance RZ/G1M Dual ARM Cortex A15 MPU and the carrier board with optional 7" capacitive Display Kit. The development board can be used for quick prototyping of various applications targeted by the RZ/G1M processor. With the 120mm x 120mm Nano ITX size, the kit is highly packed with all the necessary onboard connectors to validate the RZ/G1M MPU features. APPLICATIONS: Industrial HMI and Access Control , Industrial Control and Automation, Infotainment & Digital Signage, Video Surveillance & Security, Real Time Image Recognition, Home & Office Automation, White Goods and Smart Appliances. iW-RainboW-G20D-QSeven HIGHLIGHTS High Performance Dual Cortex A15 MPU @ 1.5 GHz SGX544MP2 3D Graphic Core @ 520MHz Multi - Channel Video input, HD Encode & Decode USB3.0, Gigabit Ethernet, PCIe, SATA, LVDS IOs 7" Display Kit with Capacitive Touch Screen RZ/G1M QSeven SOM: RZ/G1M Cortex A15 MPU @ 1.5GHz 1GB DDR3 RAM 2MB SPI NOR Flash 4GB eMMC Flash 10/100/1000 Ethernet PHY QSeven Carrier Board: SATA - 1 Port 1 PCIe - 1 Port 1 Gigabit Ethernet - 1 Port LVDS Display - 1 Port USB 3.0 Host - 1 Port USB 2.0 Host - 2 Ports USB 2.0 OTG - 1 Port SD Slot - 1 Port 7" Display with CAP Touch 2 Audio Codec, In / Out Jack Serial Console on USB Port Data UART - 1 Port CAN PHY - 1 Port IO Expansion Connectors 12V, 2A DC Input Nano ITX Size: 120mm x120mm Camera Daughter Board 3 : 16-Bit Camera - 1 Port 4 8-Bit Camera - 1 Port Analog Video Input - 1 Port HDMI Display - 1 Port 4 OS Support: Linux 3.10.31, Android KitKat 4.4.2 * Operating Temperature: 0°C to +60°C Note1: SATA and PCIe are Multiplexed in the RZ/G1M MPU. Only one be supported at a time. PCIe is supported in default configuration. Note2: 7" Capacitive Display Kit is optional feature. Note3: Camera Daughter board is optional feature. Note4: 16-Bit Camera and RGB interfaces are Multiplexed. HDMI Port is supported by default. 26 RZ/G1M Qseven Carrier Board - BLOCK DIAGRAM To On Board Peripherals RZ/G1M SOM Carrier Qseven MXM Connector Debug MicroAB Conn. JTAG Header USB to UART Converter SCIF0/JTAG VCC-5V GP0_I2C MFG LVDS0 +5V EtherAVB Ethernet(Top) RJ45 & USB Stack USB 2.0 (Bottom) UART0 I2S/HDA 100/1000 ENET VCC-RTC USB_P0 USB0 SPI USB_P1 Control Signals LCD Backlight Controller I2S USB3.0_RX USB3.0_TX Audio OUT Jack I2S CODEC Audio IN Jack +3V RTC Battery Holder MSIOF2(CS0#) SPI Flash Push Button Output Control Signals (SUS_STAT#,SUS_S3#,SUS_S5#,THRMTRIP#) USB_P2 USB_P6 USB_P7 FAN Control PWM5 x 1 LED’s FAN Header To connect Add On Module PCIe Clock Buffer PCIe RSVD PCIe Switch Reserved Pins MSIOF2 (CS1#) I2C5 PCIe x 4 Slot 7” RGB Capacitive LCD Conn. 7”LCD Backlight Conn. USB1_HUB_2 Port1(Bottom) I2C2 SMBUS/GP1_I2C SDHI2 22-Pin Conn. RGB -24bit Input Control Signals (RST_BTN#) port2(Top) Dual USB 3.0 Port SD/MMC Conn. CAN Header (6Pin) LVDS Receiver I2C2 USB1_HUB_1 OTG µUSB Port Mini PCIe Conn. Capacitive TP Conn. LVDS-DU0 LVDS_BLEN SCIFB1 Input Power Jack To Other Peripherals I2C2 2 UART Header (6Pin) ON/OFF 12V DC Switch On Board Regulators CAN1 CAN Transceiver SATA0/SATA1 SDIO I2C5 CAN0 RST_BTN# 1 SATA 80 Pin Carrier Expansion Connector - 3 Q7_GPIOs Control Signals 80 Pin SOM Expansion Connector - 1 80 Pin SOM Expansion Connector - 2 VIN0(8bit/16bit/24bit), VIN1(8bit/16bit)/ DU1(24bpp), VIN2(8bit), SCIF4 CAN1, SSI3 & SSI4, MSIOF1, HSCIF1, SCIF1, PWM1, LBSC/GPIOs 80 Pin Carrier Expansion Connector - 1 80 Pin Carrier Expansion Connector - 2 1 SATA connector is supported in carrier board but RZ/G1M/G1N SOM doesn’t support SATA in edge connector by default. 2 JTAG connector is supported in carrier board but RZ/G1M/G1N SOM doesn’t support JTAG in edge connector by default. Note: Green Font blocks are not supported in RZ/G1N CPU OPTIONAL KITS/MODULES Linux 3.10.31 Android KitKat 4.4.2 * 27 RZ/G1M QSeven Development Kit Board Support Package Hardware & Software User Manuals 7"LCD Display Kit with Cap Touch Screen Camera Daughter Board BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support System On Module iW-RainboW-G15M-Q7 i.MX6 Qseven Module iWave Systems offers high performance Qseven SOM module based on NXP's i.MX6 ARM Cortex-A9 processor for faster and multimedia focused applications. With extreme peripheral integration, the CPU supports industry latest high-performance interfaces, such as PCIe Gen2, Gigabit Ethernet, SATA 3.0, HDMI 1.4, SDXC, MIPI CSI/DSI and 64-Bit DDR3 interfaces. The module is compatible to Qseven R2.0 ARM specification and features 1GHz ARM Cortex A9 Quad Plus/Dual Plus/Quad/Dual/Dual Lite/Solo core CPU, on-board 1GB DDR3 RAM, eMMC Flash, Micro SD slot and JTAG headers. APPLICATIONS : Industrial HMI, Automotive IVI, Video & Navigation, Graphical Instrument Clusters, Portable Medical Devices, Intelligent Industrial Control Systems and Home Energy Management Systems SPECIFICATIONS iW-RainboW-G15M-Q7 HIGHLIGHTS ARM Cortex A9 @1GHz/800MHz Quad Plus/Dual Plus/Quad/Dual/ Dual Lite/Solo core 64-bit DDR3-1066 support OpenGL® ES 2.0 3D, OpenVG™ 1.1 graphics accelerators Multi format HD1080p HW decode and encode Four simultaneous display support Technical and quick customization support 10+ years, long term support CPU Data UART x 1 i.MX6 1GHz/800MHz ARM Cortex A9 QP/DP/Q/D/DL/S PWM GPIOs PMIC NXP PF0100 PMIC Expansion Connector RAM Camera CSIx2 (8-bit) MIPI CSI, DSI 24-Bit RGB LCD IF Dual UART 3x3 Key, Memory Bus ESAI, SPDIF MLB I2C3, PWM, GPIO 1GB DDR3 for Q/D/DL (Expandable up to 4GB1 ) 1 512MB DDR3 for Solo (Expandable up to 2GB ) Storage 4GB eMMC Flash (Expandable 1) 2MB SPI Flash (Expandable1 ) On-board Micro SD Slot Qseven Edge Connector PCIe v2.0 x 1 lane HDMI 1.4 3 SATA 3.0 x 1 Gigabit Ethernet Dual LVDS USB2.0 Host x4 USB2.0 OTG AC97 Audio 8-bit SD/MMC CAN1 SPI, I2C Debug UART x1 2 Temperature -40°C to 85°C Board Form Factor Qseven R2.0 Compatible Power Input 5V, 1A Typical Operating Systems Linux 3.14.38 Android 5.0 Lollipop Windows Embedded Compact7 Debug Support Onboard JTAG Header 1 1 Contact iWave for memory expansion support. 2 Not populated in mass production SOM. 3 Support available only for i.MX6 Quad and Dual SOMs. www.iwavesystems.com Note: device drivers provided are for specific interface chipsets which are used in iWave's carrier board. 28 i.MX6 Qseven MODULE BLOCK DIAGRAM DDR3(64 bit) DDR3 RAM PMIC SPI SPI NOR Flash MMC (8 bit) eMMC PMIC Micro SD Connector SD (4 bit) LCD(24 bpp) x 1, MIPI-DSI x 1 Expansion Connector1 (80Pin header) Camera1 (8bit) x 1 UART (with CTS & RTS) x 2 ESAI x 1, SPDIF x 1 Memory Bus (Address/Data Muxed) Camera2 (8bit) x 1 MIPI-CSI x 1 Expansion Expansion Connector2 Connectors (80Pin header) UART x 1 Keypad 3x3 MLB x 1 I2C3 x1 SATA II 3.0 Gbps USB OTG HS PHY eCSPI1 USB HOST1 HS PHY eSDHC4 CSI 1 (4 Port) LVDS x 2, PWM x 1 HDMI x 1 Audio x 1 AUDMUX4 10/100/1000 ENET CSIO EIM USBHost x 1 USB 2.0 Hub USBHost x 4 HDMI 1.4 DISPO, MIPI DSI UART1, UART3 SATA x 1 USBOTG x 1 LVDSO, LVDS1,PWM eSDHC3 ESAI, SPDIF PCIex1 PCIe Bus MMDC RGMII x 1 Nand Flash* CPU i.MX6 QP/DP Q/D/DL/S RTC Controller* I2C1, I2C2 WDOG 8 GPIOs, Status & Control Singles UART4 JTAG KPP I2C3 I2C x 2 CAN x 1 , Data UART x 1 CAN1/UART5 GPIOs Dual SPDT Switch IC* Debug SJC UART2 QSEVEN PCB Edge Connector (230 Pin) SPI x 1 (Chip selects) eCSPI2 MIPI CSI Ethernet SD/MMC(8bit) x 1 eSDHC1 WDOG1 MLB Gigabit Ethernet PHY JTAG (20Pin Header)* UART x 1 Power to Peripherals RS232 Transceiver* PMIC 3Pin Header* 5V 2Pin Power In* Note: MLB is supported only in automotive part *Optional items not included in the standard deliverables. OS SUPPORT DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT Linux 3.14.38 Android 5.0 Lollipop WEC7 i.MX6 Qseven SOM Module Board Support Packages User Manual iW-RainboW-G15D-Q7 (i.MX6 Development Kit) iW-RainboW-G15D-Q7 Heat Spreader BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support 29 Development Platform iW-RainboW-G15D-Q7 i.MX6 Qseven Development Kit The Development Platform incorporates Qseven compatible i.MX6 SOM which is based on NXP's i.MX6 Series multimedia focused processor and Generic Qseven compatible Development Board. This platform can be used for quick prototyping of any high end applications in verticals like Automotive, Industrial & Medical. Being a nano ITX form factor with 120mmx120mm size, the board is highly packed with all necessary onboard connectors to validate complete i.MX6 CPU features. APPLICATIONS: Industrial HMI, Automotive IVI, Video & Navigation, Graphical Instrument Clusters, Portable Medical Devices, Intelligent Industrial Control Systems and Home Energy Management Systems. SPECIFICATIONS iW-RainboW-G15D-Q7 HIGHLIGHTS Ideal for Quick Proof of concept (POC) development. Shortens 60% of the new product development life cycle i.MX6 QP/DP/Q/D/DL/S support Quick customization services in a very shorter period i.MX6 CPU Module: i.MX6 Quad Plus/Dual Plus/Quad/Dual/Dual Lite/Solo ARM®Cortex™-A9 core @1GHz/800MHz RAM 1GB DDR3 for QP/DP/Q/D/DL (Expandable up to 4GB*) 512MB DDR3 for Solo (Expandable up to 2GB*) Storage 4GB eMMC Flash (Expandable*) 2MB SPI Flash (Expandable*) On-board Micro SD Slot Carrier Board: Storage SATA 3.0 - 1Port Standard SD/MMC Communication Interfaces Gigabit Ethernet - 1 Port USB 2.0 Host - 2 Ports USB 2.0 OTG - 1 Port USB Debug Port (Serial to USB conversion) UART - 2 Ports 4 Wire Resistive Touch Connector* CAN - 2 Ports PCIe x 1 Slot Mini PCIe Slot* - PCIe Interface - USB Host Interface - SIM Interface - SMB Interface Power Input:12V @2A DC Input Sensors 3-Axis Accelerometer Digital e-Compass Ambient Light Sensor Altimeter/Barometer Audio and Video AC’97 codec- Audio IN/OUT Jacks TV-IN RCA Jack (NTSC/PAL Input)* Parallel Camera ZIF Connector- CSI1 (8Bit) MIPI Camera Connector LVDS1 - 7" 800x480 Display with Cap Touch Backlight PWM Control HDMI v1.4 - Port LVDS 2 Connector On-Board Headers 10 Pin JTAG Header* SPI Header 4x4 Keypad Interface Header RTC Coin Cell Holder 120 Pin Expansion Connector Interface 24bpp RGB LCDIF ESAI MIPI-DSI MIPI-CSI CSI2 (8 Bit) Memory Interface (Address/Data Muxed) MLB (Supported only in Automotive CPU) O Operating Temperature: 0 to 50 C Form Factor: Nano ITX 120mmx120mm *Optional items are not included in the standard deliverables 30 i.MX6 Qseven DEVELOPMENT BOARD BLOCK DIAGRAM i.MX6_Q7_MXM Connector (230 pin Connector) 22-Pin Conn 1 LVDS0 Reset Button LVDS1 Ac’97 CODEC eSDHC1 Header eCSPI2 Resistive TP* Capacitive TP HDMI Conn PCIe Bus PCIe x 1 PCIe x1 Slot AUDMUX4 SD Conn (8 bit) Touch Controller* RTC Battery VDD_SNVS_IN LVDS Receiver 7" EDT LCD Conn 20-Pin LVDS AudioIN/OUT +12V DC Input MAIN +5V Standby Input SATA-II 20-Pin Conn RGB LCD Conn Power Jack +5V Input Mini PCIe Slot USB 2.0 Hub Dual USB2.0 Slot USB OTG PHY USB OTG Slot I2C1 Gigabit Ethernet RJ45 MagJack HDMI 1.4 JTAG/UART-2 JTAG Header I2C2 Serial to USB Debug Port (Micro USB) UART-5 RS232 Transciever DB9 Conn CAN1 CAN Transciever DB9 Conn Digital e-Compass Altimeter Light Sensor Accelerometer i.MX6_Expansion Connector-1 120 pin Expansion Connector MIPI.DSI CAN2 CAN Transciever CAN Header DISP0 UART-3 RS232 Transciever UART Header ESAI CSI0 i.MX6_Expansion Connector-2 KPP MLB MIPICSI EMI CSI1 Video Decoder* TV - IN* 4x4 Keypad Header Camera (8 bit) Conn 1. Support available only for i.MX6 Quad and Dual CPUs *Optional items not included in the standard deliverables. OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 3.14.38 Android 5.0 Lollipop WEC7 iW-RainboW-G15D-Q7 Platform Board Support Packages Power Adapter User Manual Camera Add On Module 24BPP LCD Add On Module Wi-Fi Module 3G and GPS Module Custom SOM/ Carrier Card Development BSP Development/ OS Porting Design Review & Support 31 System On Module iW-RainboW-G17M-Q7 Cyclone V SoC Qseven Module iWave Systems launched world’s first Altera Cyclone V SX SoC FPGA based Qseven compatible module for the increased system performance requirements. The dual ARM Cortex A9 core with the FPGA allows greater flexibility for the system designers and helps to lower the system cost and power consumption. The improved logic integration with integrated high speed transceivers and hard memory controllers provides increased bandwidth capacity which is ideal for cost-sensitive high end applications. APPLICATIONS: Industrial Automation, Smart Energy Systems, Video Surveillance, Defense & Aerospace. iW-RainboW-G17M-Q7 HIGHLIGHTS ARM Cortex A9 Dual core CPU integrated with FPGA with up to 110K Les Enhanced with integrated transceivers and hard memory controller Readily available FPGA IP Cores for integration R2.0 Qseven Compatible module SPECIFICATIONS CPU: Qseven PCB Edge Connector Interfaces: Altera’s Cyclone V SX SoC FPGA • Integrated Dual core ARM Cortex-A9 Hard Processor System(HPS) From HPS: Gigabit Ethernet - 1 Port (On-SOM PHY) USB 2.0 Host - 4 Ports (On-SOM HUB) CAN - 1 Port 2 SD/MMC (8 bit) WDOG - 1 Port I2C - 2 Ports SPI - 1 Port Debug UART - 1 Port 2nd UART - 1 Port Other Control IOs - Through HPS 3 From FPGA: LVDS LCD - 2 Ports (FPGA Soft IP)/23 SE IOs AC97/I2S Audio (FPGA Soft IP)/5 SE IOs PWM FPGA IOs - 8 SE IOs From FPGA High Speed Transceivers: 3 PCIe Gen1 x 4 Lane • FPGA with upto 110K LEs Memory: 16MB QSPI Flash 1 2 On-SOM Micro SD Connector 256MB DDR3 for FPGA EPCQ Flash/QSPI Flash for FPGA1 EEPROM On Board Peripherals Support: JTAG Header for FPGA JTAG Header for HPS 1 80 Pin Expansion Connector: FPGA IOs (Up to 45 Single Ended IOs - SE IOs): 9 TX LVDS Pairs/18 SE IOs 11 RX LVDS Pairs/22 SE IOs 5 Single Ended IOs FPGA Dedicated Clock IOs: General Purpose Clock Inputs (2 LVDS/2 SE) General Purpose Clock Outputs (1 LVDS/2 SE) Others: SMBUS/2 SE IOs FPGA JTAG SATA (FPGA Soft IP) Form Factor: 70mm x 70mm Qseven Specification 2.0 Power Input: 5V DC Operating Temperature: o o -40 C to +85 C Industrial Operating System: Linux 3.10, WEC7 1 Optional featured. Not supported by default. 2 On-SOM Micro SD Connector and Qseven Edge SD/MMC are sharing the same interface 3 If the FPGA interfaces available in the Qseven edge are not used for Qseven compliance requirement, same interface pins can be used for custom Industrial/networking interface requirements. 32 CYCLONE V SoC Qseven SOM BLOCK DIAGRAM Hard Processor System (Dual-core ARM® Cortex™-A9 MP Core processor) DDR3 RAM (512MB) DDR3 for ECC (256MB) DDR3 ECC (8 bit) I2C QSPI I2C0, I2C1 Micro SD Connector SD/MMC (8bit)1 UART0 I2C0 I2C RTC Controller SD/MMC SPIM0 QSPI Flash (16MB) EEPROM* SDRAM Controller 5V 1 UART1 I2C0 CAN WDOG CAN1 GPIO EMAC1 JTAG HPS JTAG* USB1 EPCQ Flash* Cyclone V SX SoC FPGA QSPI Flash (64MB)* AS Interface FPGA FPGA JTAG JTAG General Purpose Clock I/Ps (2 LVDS/2 SE) General Purpose Clock O/Ps (1 LVDS/2 SE) 80 Pin Expansion Connector 9 TX LVDS Pairs/18 DE IOs 11 RX LVDS Pairs/22 SE IOs 5 Single Ended IOs SMBUS/2 SE IOs DDR3 Controller DDR3 (16bit) (Soft IP) Active Serial FPGA Dedicated Clock IOs (2.5V Differential / 2.5V Single Ended) FPGA IOs (2.5V Differential / 2.5V Single Ended) SMBUS (Soft IP) 3.3V Single Ended High Speed Transceiver FPGA AS Header* CH0 PCIe CH1 HardIP CH2 CH3 CH5 SATA CH6 Soft IP DDR3 RAM (256MB) PCIe x 4 Port SATA x 1 Port AC97/I2S(Soft IP) 3.3V Single Ended AC97/I2S x 1 Port FPGA IOs (3.3V Single Ended) 8 Single Ended IOs/LPC Interface LCD (Soft IP) 2.5V Differential LVDS LCD (24bpp) x 2 Port PWM * Optional featured. Not supported by default. 1 On-SOM Micro SD Connector and Qseven Edge SD/MMC are sharing the same interface 33 OS SUPPORT DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT Linux 3.10 WEC7 Cyclone V SoC Qseven Module Board Support Package User Manual Cyclone V SOC Qseven Development Kit Heat Spreader BSP Development/OS Porting Custom RTL Logic Development Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support Development Platform iW-RainboW-G17D-Q7 Cyclone V SoC Qseven Development Board iWave Systems launched Cyclone V SoC Development Kit – iW-RainboWG17D equipped with Cyclone V SoC based Qseven SOM and generic Qseven carrier card for the increased system performance requirements. The Dual ARM Cortex A9 core with the FPGA allows greater flexibility for the system designers and helps to lower the system cost and power consumption. The improved logic integration with integrated high speed transceivers and hard memory controllers provides increased bandwidth capacity which is ideal for cost-sensitive high end applications. APPLICATIONS : Industrial Automation, Smart Energy Systems, Video Surveillance, Defence & Aerospace, Mobile, Ultra Mobile, Automotive - Telematics, Medical Instrumentation. iW-RainboW-G17D-Q7 HIGHLIGHTS ARM Cortex A9 Dual core CPU integrated with FPGA with up to 110K LEs Enhanced with integrated transceivers and hard memory controller Readily available FPGA IP cores for integration Ideal for Quick Proof of concept (POC) development Shortens 60% of the new product development life cycle SPECIFICATIONS Cyclone V SoC Qseven SOM Cyclone V SoC 5CSXFC6 512MB HPS DDR3 RAM 256MB FPGA DDR3 RAM 10/100/1000 Ethernet PHY 4 Port USB2.0 HUB On SOM µSD Slot 1 JTAG Header for FPGA RTC Controller OS: Linux 3.10 ,WEC 7 Qseven Carrier Board Standard SD/MMC - 1 Port (Boot & OS Storage) 2 SATA 3.0 - 1 Port Debug Console through Micro USB Data UART - 1 Port CAN – 1 Port USB 2.0 Host - 3 Ports 10/100/1000 Ethernet - 1 Port PCIe x1 Slot 2 AC'97 codec- Audio IN/OUT Jacks LVDS – 2 Ports 7" TFT Display (800x480) with Capacitive Touch 2nd LVDS Connector PWM JTAG Header 1 o Operating Temperature: 0 to 55 C Form Factor: Nano-ITX (120mmx120mm) Power Input: 12V 1 Optional items are not supported by default 2 Only Hardware support is provided by default Quick customization services 34 Cyclone V SoC Qseven DEVELOPMENT BOARD BLOCK DIAGRAM Cyclone V SoC SOM Qseven MXM Connector (230 pin Connector) 22-Pin Conn SATA 0* 7-Pin Conn SATA 1* 20-Pin LVDS LVDSO 7" RGB LCD Conn LVDS Receiver Power to SOM and Power Regulators Reset Button PCIe PCIe x1 Slot Mini PCIe Slot 20-Pin LVDS LVDS1 AC’97 CODEC SSI/AC’97* SD Conn (8 bit) Four Port USB HUB Dual USB2.0 Slot SD/MMC Header Resistive TP +12V IN RTC Battery RTC Controller 7" EDT LCD Conn AudioIN/OUT Power Jack Peripherals SPI Touch Controller Gigabit Ethernet I2C1 Capacitive TP Digital e-Compass RJ45 MagJack UART0 Serial to USB Debug Port (Micro USB) I2C2 Altimeter UART1 RS232 Transciever DB9 Conn Light Sensor CAN1 CAN Transciever DB9 Conn Accelerometer CAN1 Header Cyclone V SoC SOM Expansion Connector (80 Pin) FPGA Dedicated FPGA Dedicated Clock Inputs Clock Inputs (2DE/2SE) (2DE/2SE) FPGA Dedicated Clock Inputs (1DE/2SE) FPGA TX LVDS Pairs (9DE/18SE) 120 pin Expansion Connector FPGA RX LVDS Pairs (4DE/8SE) OS SUPPORT Linux 3.10 WEC 7 35 DELIVERABLES iW-RainboW-G17D-Q7 Platform Board Support Packages Power Adapter User Manual OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT iW-RainboW-G17M-Q7 (Cyclone V SoC Qseven SOM) Custom SOM/ Carrier Card Development BSP Development/ OS Porting Design Review & Support System On Module iW-RainboW-G12M-Q7 DM816x Qseven SOM iWave's DM816x SOM is based on TI's DaVinci DM8168x ARM Cortex-A8+C674x DSP Microprocessor for faster and more robust applications. With extreme system and peripheral integration, the DSP+ARM MPUs provide multiple high-performance interfaces, such as PCIe Gen2, HDMI 1.3, SATA2.0, Gigabit Ethernet and DDR3 interfaces. The module is compatible to Qseven R1.20 ARM specification and features 1.2 GHz CPU, on-board DDR3 RAM, Nand Flash, Micro SD slot and JTAG header. APPLICATIONS : Industrial Automation, Medical, HMI, Interactive POS, Single Board Computing, Network & Communication Processing, Video Surveillance Systems. iW-RainboW-G12M-Q7 HIGHLIGHTS C674x 1 GHz DSP+ARM Cortex A8 @ 1.2 GHz Integrated high bandwidth connectivity peripherals SPECIFICATIONS Processor Debug UART TI DM816x ARM Cortex A8 @ 1.2 GHz C674x DSP @ 1 GHz Expansion Connectors Memory 1GB DDR3 SDRAM 128MB Nand Flash (expandable*) On-board Micro SD Slot (default boot) Qseven Edge Connector SGX530 3D Graphics Engine for rich user interfaces Dual simultaneous 1080p display engine More complex Graphical User Interfaces (GUIs) PCIe 2.0 x 2 Lanes HDMI 1.3 SATA 2.0 x 2 LVDS, I2S Port USB2.0 Host x 4 USB2.0 Device SD/SDIO SPI, I2C Audio McASP Port Gigabit Ethernet GMII x 1 HD Video IN x 2 Ports Analog HD & SD Video OUT Audio McASP x 2 Ports UART x 2 Ports GPIOs JTAG Header Temperature Operating 0°C to +70°C Board Form factor Qseven R1.20 Compatible (70mm x 70mm) Power Input 5V, 2A Operating Systems Linux 2.6.37 * Optional items are not supported by default Technical & Quick customization support 36 DM816x Qseven SOM BLOCK DIAGRAM Micro SD SDIO x 1 128MB NAND FLASH SATA2.0 x 2 Audio Port x 1 1GB DDR3 Qseven Edge Connector I2C x 1 JTAG Header HDMI 1.3 x 1 PCIe2.0 x 2 Audio Ports x 2 Giga Ethernet MAC x 1 TI DM816x CPU USB2.0 Device SPI x 1 Video IN x 2 Expansion Connectors Debug UART Video OUT UART x 2 USB2.0 Host USB2.0 Hostx4 USBHUB GPIOs RGB IF RGB-LVDS LVDS * Optional featured. Not supported by default 37 OS SUPPORT DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT Linux 2.6.37 DM816x Qseven SOM module Board Support Packages User manual iW-RainboW-G7D (ARM Qseven generic carrier board) Heat Spreader BSP Development/OS Porting Custom SOM/Carrier card development Custom application/GUI development Design review and support Development Platform iW-RainboW-G12D-Q7 DM 816x Qseven Development Kit The Development Platform incorporates Qseven compatible DM816x SOM which is based on TI's DSP+ARM Cortex-A8 based DaVinci Processor operating up to 1.2GHz and Generic Qseven compatible Carrier Board. This platform can be used for quick prototyping of any high end applications in verticals like Industrial, Medical and Networking. Being a nano ITX form factor with 120mmx120mm size, the board is highly packed with all necessary onboard connectors to validate complete DM8168 CPU features. APPLICATIONS: Single-Board Computing, Network and Communications Processing, Industrial Automation, Human Machine Interface, Interactive Point-of-Service Kiosks. iW-RainboW-G12D-Q7 HIGHLIGHTS TI DM8168 ARM Cortex-A8 @ 1.2 GHz + C674x DSP @ 1 GHz Ideal for Quick Proof of concept (POC) development. Shortens 60% of the new product development life cycle Quick customization services in a very shorter period Suitable for Wide Range of Applications SPECIFICATIONS CPU: TI DM816x Cortex A8 CPU @1.2 GHz C674x DSP @ 1 GHz RAM: 1GB DDR3 RAM Storage: 128MB NAND Flash (Expandable) Micro SD slot (default boot device) 1 Standard SD slot-1 Port SATA 2.0 - 2 Ports Communication Interfaces: Gigabit Ethernet - 1 Port (through expansion card) USB 2.0 Host - 1 Port/3 Ports 1 USB 2.0 device - 1 Port PCIe 2.0 x 2 Lane - 1 Port RS232 Debug Console - 1 Port Video OUT: 7"LCD with 4 Resistive Touch HDMI 1.3 - 1 Port Connectivity: Mini PCIe Connector 1 Expansion Connector-1 : GMII Interface, FF UART, GPIOs, Multichannel Audio Interface 2 Miscellaneous Headers : UART Header SPI Header Analog HD & SD Video Out Headers Temperature: o 0 to 60 C Form Factor: Nano ITX 120x120mm Power Input: 12V @ 2A DC Input 1 Optional items are not supported by default 2 Foot prints only 38 DM816x Qseven DEVELOPMENT BOARD BLOCK DIAGRAM Qseven_MXM Connector (230 pin Connector) +5V Input Power Jack Reset Button 22-Pin Conn 7-Pin Conn 40-Pin Res TP RGB LCD Conn SATA Port 0 SATA II3.0Gbps SATA Port 1 SATA II3.0Gbps VCC_RTC LVDS0 PCIe 2.0 port x 2 lane RGB-24bit Resistive TP Conn LVDS0 LVDS Receiver SD Conn (4bit)* Header TV IN I2C HDMI 1.3 USB Device SD SD/SDIO* SPI UART2 SPI 1 Video Decoder D[7:0] RTC Battery PCIe x1 Slot Connector PCIe x1 lane Mini PCIe Connector USB Port 4* USB A-Type Conn USB Port 0 USB Port 2* Dual USB Stack Conn USB Port 1 USB OTG Mico/mini AB UART2 RS232 TxRx DB9 Conn RS232 TxRx UART Header 80 pin Expansion Connector-1 Video In 0 McASP0, PWM, GPIOs, UART0 McASP0, PWM, UART0, GPIOs, Video In D[15:0] Expansion Connector (120-Pin header) USB Host x 1/ USB 2.0 Hub (4Port) I2C1 HDMI 1 Push Button* RTC USB Port 3* Capacitive TP* HDMI Conn Push Button Power Button Touch Controller +12V DC Input MAIN +5V Standby Input UART 2 UART 1,2 UART 1 80 pin Expansion Connector-2 McASP1 McASP1 GMII Interface HD Video Out SD Video Out EMAC1 Video In1 HD Video Out 1 Header SD Video Out Header Camera Interface-8bit 1 Camera Conn 1 * Optional featured. Not supported by default 1 Foot prints only 39 OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 2.6.37 iW-RainboW-G12D Platform Gigabit Ethernet Expansion Card Board Support Packages Power Adapter, User Manual Wi-Fi Module Custom SOM/Carrier Card Development BSP Development/OS Porting Design Review & Support System On Module iW-RainboW-G15M-MXM i.MX6 MXM Module The i.MX6 MXM SOM is based on i.MX6 Series Quad/Dual/Dual Lite/Solo core processor. A single ruggedized MXM edge connector provides the carrier board interface to carry all the I/O signals to and from the MXM module. With 1080p HD decoding and encoding and 2D/3D graphics an enhanced and optimized user experience is achieved. The MXM connector pinouts are fully compatible with iWave i.MX53 MXM SOM. The i.MX6 MXM SOM has an additional expansion connector to bring out the special/extra features of i.MX6 Quad/Dual/Dual Lite/Solo core processor. The i.MX6 MXM SOM is simple and low cost yet rugged. APPLICATIONS : Automotive Infotainment, Advanced HMI, Telematics, Digital Signage, Healthcare and Medical Equipments. iW-RainboW-G15M-MXM HIGHLIGHTS i.MX6 CPU Module: ARM Cortex A9 @1GHz/800MHz Quad/Dual/ Dual Lite/Solo core i.MX6 Quad/Dual/Dual Lite/Solo ARM®Cortex™-A9 core @1GHz/800MHz 64-bit DDR3-1066 support 1GB DDR3 for Q/D/DL (Expandable up to 4GB1) 512MB DDR3 for Solo (Expandable up to 2GB1) OpenGL® ES 2.0 3D, OpenVG™ 1.1 graphics accelerators Multi format HD1080p HW decode and encode RAM SATA 3.0 X 1 Port 3 Storage 4GB eMMC Flash (Expandable 1) 2MB SPI Flash (Expandable1 ) On-board Micro SD Slot NAND Flash* Expansion Connector - 100 Pins MIPI CSI & MIPI DSI Four simultaneous display support Targeted for rugged automotive applications 85mmx85mm MXM3 compatible Debug Support Onboard JTAG header 2 Technical and quick customization support Temperature: Power Input: 1 Optional features are not supported by default 2 Not populated in mass production SOM 3 Support available only for i.MX6 Quad and Dual CPUs Note: device drivers provided are for specific interface chipsets which are used in iWave's carrier board 10+ years, long term support 40 i.MX6 MXM Module BLOCK DIAGRAM DDR3 RAM (1GB/512MB) SPI Flash - 2 MB 1 MMDF (8 bit) NAND Flash* eMMC - 4GB 2 I2S Audio x (1/3) SD (4 bit) Micro SD Connector 3 RGMII X 1 Gigabit Ethernet PHY 10/100/1000 ENET MXM3.0 RVS PCB Edge Connector (314 Pion) 2 SD/MMC (4 Bit) X 2 MLB Expansion Connector1 (100 Pin Header)* MIPI-DSI x 1 HDMI Tx1-4 JTAG (20pin Header) 2 Pin Power In* MIPI DSI Camera (8bit) x 2 CSIO 5V Onboard Regulators UART x (3/5) Memory Bus* 5V 1 NAND Flash is optional & these signals are also routed to MXM connector & some of the signals are shared with eMMC 2 eSDHC3 port will be share uSD and MXM connector 3 RGMII signals are shared with on board Gigabit Eth PHY & expansion connector * Optional featured. Not supported by default OPTIONAL /MODULES Linux 3.14.38 Android 5.0 Lollipop 41 i.MX6 MXM Development Kit Heat Spreader Development Platform iW-RainboW-G15D-MXM i.MX6 MXM Development Kit iW-RainboW-G15D is a multipurpose platform powered by automotive grade i.MX6 MXM SOM which is based on Freescale’s i.MX6 Series multimedia focused processor. This platform can be used for quick prototyping of any high end applications in verticals like Automotive, Industrial & Medical. Being a nano ITX form factor with 120mmx120mm size, the board is highly packed with all necessary onboard connectors to validate complete i.MX6 CPU features. APPLICATIONS: Automotive Infotainment, Advanced HMI, Telematics, Digital Signage, Healthcare and Medical Equipments. iW-RainboW-G15D-MXM HIGHLIGHTS Ideal for Quick Proof of concept (POC) development Shortens 60% of the new product development life cycle Quad Display Support Quick customization services in a very shorter period Compact (NanoITX 120mm X 120mm) form factor Suitable for Wide Range of Applications SPECIFICATIONS i.MX6 CPU Module: i.MX6 Quad/Dual/Dual Lite/Solo ARM®Cortex™-A9 core @1GHz/800MHz RAM 1GB DDR3 for Q/D/DL (Expandable up to 4GB*) 512MB DDR3 for Solo (Expandable up to 2GB*) Storage 4GB eMMC Flash (Expandable*) 2MB SPI Flash (Expandable*) On-board Micro SD Slot Carrier Board: Storage: SATA 3.0 - 1Port Standard SD/MMC -1 Port Sensors*: 3-Axis Accelerometer Digital e-Compass Ambient Light Sensor Audio and Video: On-board Audio Codec Audio IN/OUT Jacks TV-IN RCA Jack - 1 Port* Parallel Camera - 1 Port 800x480 - RGB 7" LCD HDMI 1.4 - 1Port Audio Amplifier* Communication Interfaces: Gigabit Ethernet - 1 Port USB 2.0 Host - 3 Ports USB 2.0 OTG - 1 Port RS232 Debug Console - 1Port CAN - 2 Ports (DB9, Header) Mini PCIe 2.0 - 1 Port PCIe X 1 Slot* Wi-Fi Module (Shared with Micro SD)* On-Board Headers: UART Headers ESAI Header MLB Header RTC Coin cell Holder Carrier Expansion Connector-1*: Memory Bus,UART,I2C MLB(3 pin), SSI,GPIOs,12V Carrier Expansion Connector-2*: i.MX6 RGMII,ENET Interface* MIPI CSI, MIPI CSI,MLB-6pin,12V Operating Temperature: O 0 to 50 C Power Input: 12V @2A DC Input Form Factor: Nano ITX 120mmx120mm *Optional features are not supported by default Note: device drivers provided are for specific interface chipsets which are used in iWave's carrier board 42 i.MX6 MXM DEVELOPMENT BOARD BLOCK DIAGRAM 7-Pin Conn +5V Input SATA Port 0 22-Pin Conn* Reset Button Push Button # I2S I2S CODEC Audio Amp* Video Decoder* SD/SDIO-1 SD/SDIO-2 SD Wi-Fi* 20-Pin LVDS Conn x2* Port-1 Port-3 & 4 USB Hub 4 Port iMX6 MXM SOM (MXM-3 RVS 314-Pin Connector) Port-2 USB OTG CAN 1 12C-1 Touch Controller CAN 0 UART 1 MLB & EASI UART3&4&5 RGB-24bit 40-Pin Res TP RGB LCD Conn 3-Axis Accelerator* I2C-1 HDMI RGMII MLB MIPI CSI & DSI 100 pin CPU Expansion Connector - 1 +12V DC 2.5A RFU Signals 60 pin CPU Expansion Connector - 2* USB A-Type Conn Header CAN TxRx RS 232 TxRx DB9 Conn (Dual) RS 232 TxRx Headers x 3* 2G Module* RS 232 TxRx I2C-2 USB A-Type Conn(Dual) CAN TxRx UART 2 HDMI Tx* PCIe x 1 Slot Connector* Mini PCIe Connector USB OTG Micro AB Conn LVDS x2 Header x2* Carrier Expansion Conn-2 120-Pin* Header USB Host CSI-1 SD Conn HDMI Conn I2C-1 & 2 CSI-0 Camera Conn-1* Resistive TP Conn RTC Battery PCI e0 Camera Conn-2 TV-In RCA Conn* Push Button RTC Audio Jack (In&Out) MIC/SPKR* Power Button Gigabit Ethernet RJ45 MagJack Header Digital e-Compass* Ambient Light Sensor* EIM,SSI,UART2,I2C-1-3,MLB,GPIOs RFU Signals Carrier Expansion Conn-1 120-Pin* +12V DC 2.5A On Board Power Regulators Power Jack +12V DC 2.5A # Support available only for i.MX6 Quad and Dual CPUs OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 3.0.35 Android Lollipop 5.0 RainboW-G15D-MXM Platform Board Support Packages Power Adapter User Manual Camera Module 7"Capacitive Touch Module 3G Module Wi-Fi Module Custom SOM/ Carrier Card Development BSP Development/ OS Porting Design Review & Support 43 Single Board Computer iW-RainboW-G22S RZ/G1E Pico-ITX SBC iWave’s RZ/G1E SBC which is based on Renesas power efficient Dual core ARM Cortex A7 CPU cores operating @1GHz speed. The board can be used for quick prototyping of various applications targeted by the RZ/G1E processor. With the 100mm x 72 mm Pico ITX size, the kit is highly packed with all the necessary on-board connectors to validate the RZ/G1E CPU features. APPLICATIONS: HMI & Access Control, Digital Signage, Industrial Control, IOT gateway, Healthcare devices, Point of sale, Network & high vision camera, Home & Office automation and White goods & appliances. iW-RainboW-G22S HIGHLIGHTS Dual Core ARM Cortex-A7 @ 1GHz Hardware HD encode & decode Built in SGX540 3D Graphic acceleration Ultra-compact form size 100mm x 72mm SPECIFICATIONS CPU: Renesas’s RZ/G1E CPU @ 1GHz SGX540 Graphics core @ 260MHz Data UART - 1 Port 512 MB DDR3 4GB eMMC Flash IO expansion headers JTAG header 100/1000 Ethernet PHY 10/100 Ethernet PHY 1 Power Supply: 5V@2A DC Input Micro SD Slot Operating Temperature: SODIMM Carrier board: Gigabit Ethernet - 1 Port OS Support: USB 2.0 host - 2 Ports USB2.0 device - 1 Port SD Slot - 1 Port 8-bit CSI Camera - 1 Port 1 Audio Codec, In/Out Jack RGB display - 1 Port Resistive touch controller CAN PHY - 1 Port Serial console on USB Port 0 C to 60 C Linux 3.10.31 Form Factor: 100mm x 72mm 2 HDMI Daughter Board : ADV7511 HDMI Transmitter HDMI Output - 1 Port nd CAN PHY - 2 Port RS232 - 3 Ports nd Note1 : 2 Ethernet and 8-bit camera interface is multiplexed in the RZ/G1E CPU. At a time anyone can be used. By default 8-bit camera interface is supported in the board. Note2 : HDMI Daughter Board is a optional feature. 44 RZ/G1E Pico - ITX SBC - BLOCK DIAGRAM RTC Controller (Optional) Micro SD Connector CAN Header Debug USB Micro AB Connector I2C1 RTC Battery Holder RTC Control Switches Boot Mode, ONOFF,RST SDHC x 4bit CAN Transceiver UART to USB Bridge To On-Board Power Circuit & Peripherals RZ/G1E SODIMM SOM 3.3V Power IN SAI2/JTAG I2S µSDHC1 CAN1 Debug UART CAN1 Data UART I2S Audio Codec Audio In/Out Connector Camera x 8Bit Camera JTAG Header (Optional) 1 OV7725 Camera Connector RZ/G1E CPU 512MB RAM + 4GB eMMC UART1 UART5 I2C1 PWM4 Ethernet1 Data UART 20Pin Expansion Header Power Jack (5V) JTAG 18bpp RGB UART Header 3.3V Power Regulator I2C1 Resistive Touch Controller RGB LCD Connector 18bpp RGB DISP_BL 100/1000Mbps UART2 CAN2 CAN2 USB OTG2 SPI 2 Port USB HUB GPIOs GPIO’S USB Type A Connector1 USB_HUBP2 USB Type A Connector2 SPI 20Pin GPIO Header RJ45 MagJack1 USB_HUBP1 Ethernet2 10/100Mbps USB Device USB OTG1 1 RJ45 MagJack2 USB Micro AB Connector nd Note1: 2 Ethernet and 8-bit camera interface is multiplexed in the RZ/G1E CPU. At a time anyone can be used. By default 8-bit camera interface is supported in the board. OS SUPPORT Linux 3.10.31 45 DELIVERABLES OPTIONAL /MODULES CUSTOM DEVELOPMENT RZ/G1E Pico-ITX SBC Board Support Package User Manual 4.3” RGB display Kit Camera Module HDMI Daughter Board BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support Single Board Computer iW-RainboW-G15S i.MX6 Pico-ITX SBC iWave's new i.MX6 Quad/Dual/Dual Lite/Solo based Pico-ITX SBC integrates all standard interfaces into a single board with ultra compact yet highly integrated platform that can be utilized across multiple embedded PC, system and industrial designs. It has got all the necessary functions that the embedded world demands on a single board. It also provides an expansion header through which interfaces can be used according to their applications. Measuring just 100mm x 72mm, the Pico-ITX is currently the smallest complete ARM Cortex A9 main board in the industry, smaller than all existing ATX, BTX and ITX form factors. APPLICATIONS: Intelligent Industrial Control Systems, Industrial Human-Machine interface, Ultra Portable Devices, Home Energy Management Systems, Portable Medical Devices. iW-RainboW-G15S HIGHLIGHTS ARM Cortex A9 @ 1GHz/800MHz Quad/Dual/Dual Lite/Solo core 100mmx72mm Pico-ITX form-factor Single Board Computer HD 1080p encode and decode 3D video playback in high definition Technical and quick customization support 10+ years, long term support SPECIFICATIONS CPU: i.MX6 Q/D/DL/S @1GHz/800MHz ARM-Cortex-A9 PMIC: Debug & Status Indication Support: Micro USB Debug Port JTAG Header 4 Pos User Dip Switch & Status LEDs MMPF0100 RAM: Expansion Header-84 Pin: 1GB DDR3 for Q/D/DL (Expandable up to 4GB*) MIPI DSI 512MB DDR3 for Solo (Expandable up to 2GB*) SPI Interface-1No Storage: CSI0 Camera interface On-board Micro SD Slot CAN2 Interface Standard SD/SDIO Slot UART- 3 Nos I2C- 3 Nos SPI Flash 16Mbit GPIOs 4GB eMMC Flash Optional SATA 7 Pin Connector* LVDS1 Interface Communication Interfaces: Optional MLB interface* 10/100/1000 Mbps Ethernet Miscellaneous: Half mini PCIe card Connector RTC Controller* Dual USB Host Connector Operating Temperature: Micro USB OTG Connector -20OC to +85OC CAN Transceiver - 1 Port Power Input: Audio & Video Interfaces: 5V, 2A AC97 Audio Codec with Audio Out Jack & Form Factor: Audio In Header Pico-ITX (100mmx72mm) HDMI Port Operating Systems: LVDS Connector with Backlight Support [LVDS0] Linux 3.14.38 4 Wire Resistive Touch Controller 8 Bit CMOS Camera Connector [CSI1] 2 Lanes MIPI Camera Connector Android 5.0 Lollipop WEC7 *Optional features are not supported by default 46 i.MX6 PICO-ITX SBC BLOCK DIAGRAM i.MX6 Q/D/DL/S DDR3 RAM (1GB/512MB) 7 pin SATA Connector* eMMC (4GB) SPI Flash (16MB) eCSPI1 eCSPI1 I2C1 I2C1 Audio Out Jack Audio In Header MLB + 84pin Expansion Header LVDS1 I2C 1,2,3 User Dip I2C x 3 5V RTC Controller* I2C JTAG 47 I2C JTAG OS SUPPORT DELIVERABLES OPTIONAL/MODULES CUSTOM DEVELOPMENT Linux 3.14.38 Android 5.0 Lollipop WEC 7 i.MX6 Pico-ITX SBC Board Support Packages 5V @2A Power Adapter User Manual Advanced Learning Platform Pico ITX Enclosure Wi-Fi modules BSP Development/OS Porting Custom Application/GUI Development Design Review and Support System On Module iW-RainboW-G24M Arria 10 SoC Module Coming Soon iWave’s Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connector. APPLICATIONS: Test and measurement equipment, Control and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment. iW-RainboW-G24M HIGHLIGHTS SPECIFICATIONS Arria10 SoC & FPGA device compatibility SX270, SX320, SX480, SX570, Sx660 Gx270, GX320, GX480, GX570, Gx660 24 high speed transceivers @ 17.4Gbps Up to 76LVDS/152SE FPGA IOs 64 - Bit DDR4 support for FPGA Variable IO voltage support Industrial Grade operation SOC:Arria10 SoC Dual Core, Cortex-A9 CPU @ 1.5GHz SX270 (10AS027) FPGA Fabric 35mm x 35mm F34 Package Memory: 1GB DDR4 with optional ECC for HPS 1GB SLC NAND Flash for HPS Optional 64-bit DDR4 for FPGA QSPI Flash for FPGA (Optional) Communication: 10/100/100 Ethernet PHY For HPS USB2.0 transceiver for HPS UTMI Power Supply: 5V through SOM B2B connectors Temperature support: -40°C to +85°C Industrial Dual 240 Pin Board to Board Connector: Arria10 SoC HPS IO interfaces: Gigabit Ethernet x 1 Port USB 2.0 OTG x 1 Port SD (4bit) x 1 Port SPI x 1 Port, I2C x 1 Port Full Function UART x 1 Port Console UART, GPIOs –4 Nos Arria10 SoC FPGA IO interfaces: 24 high-speed transceivers 76LVDS/152SE FPGA IOs 8LVDS/8SE General purpose clock outputs 7LVDS/7SE General purpose clock inputs Headers: HPS/FPGA JTAG, FPGA AS headers OS Support: Linux 4.1.22 Form Factor: 95mm x 75mm 48 Arria 10 SoC SOM - BLOCK DIAGRAM Hard Processor System TM (Dual ARM Cortex - A9) DDR4 1GB (Upgradable) DDR4 (ECC) (Op onal) USB1 DDR4 (32bit) DDR4 ECC (8bit) NAND-1GB (Upgradable) SDRAM Controller (Bank 2J & 2k) UTMI USB2.0 PHY Ethernet PHY SD (4bits) Power IN (Op onal) 5V USB OTG Gigabit Ethernet SPI SPIM0 NAND Power Regulators RGMII EMAC1 SDMMC NAND Power to Peripherals Debug UART UART0 UART (with CTS & RTS) UART1 SOM Expansion High Speed Connector2 (240pin) I2C I2C1 GPIO x 4nos GPIOs Arria 10 SX / GX FPGA High Speed Transceiver (6 Channels) High Speed Transceiver (6 Channels) Bank 1C Bank 1D Bank 1E FPGA IOs(46SE) FPGA AS Header (Op onal) AS Interface Bank 2A Bank 3A FPGA IOs FPGA IOs(46SE) Transceiver PHY High Speed Transceiver (6 Channels) Bank 1F FPGA IOs(24LVDS/48SE) Bank 3B FPGA IOs SOM Expansion High Speed Connector1 (240pin) Transceiver PHY High Speed Transceiver (6 Channels) FPGA IOs(24LVDS/48SE) Bank 3C Bank 3D, 3E,3F DDR4 (64bit) DDR4 RAM (Op onal) FPGA/HPS JTAG Header JTAG Ac ve Serial JTAG 5V QSPI Flash (Op onal) FAN Header (Optional) Note: HPS (Hard Processing System) is supported only in Arria10 SX device. All IOs in SOM Expansion connectors are 1.8V tolerant IOs. Optionally, Bank 2A and Bank 3A supports variable IO level setting (1.8V, 1.5V, 1.35V, 1.2V). Each FPGA IO Bank (2A,3A,3B,3C) which goes to SOM Expansion connectors support two General Purpose Clock Input & two General Purpose Clock Output (LVDS/SE). Since 3D,3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only where these banks supported devices are used. OS SUPPORT DELIVERABLES OPTIONAL/MODULES CUSTOM DEVELOPMENT Linux 4.1.22 Arria 10 SoC SOM Board Support Package User Manual Arria 10 SoC Development Kit BSP Development/OS Porting Custom SOM/Carrier Development Custom Application/GUI Development Design Review and Support 49 2017 2014 2015 2016 RZ/G1E SODIMM SOM i.MX6UL SODIMM SOM 2013 2012 2011 2010 2009 2008 2007 2003 ARM Cortex A5 Vybrid SOM i.MX27 SOM & SBC i.MX50x SBC i.MX51x SOM intel Atom SOM X86 Marvell PXA 270 SBC i.MX53x SOM ARM Cortex A8 ARM Cortex A7 ARM Dual Cortex A7 TI DM8168 Q7 SOM ----------------- Telefon 0211 0211 // 95 95 110 110 Telefon Telefax 0211 0211 // 95 95 11 11 111 111 Telefax [email protected] [email protected] ARM 9 BSP support ARM Cortex A8 i.MX6x SOM SBC PICO SBC ARM Cortex A8+ DSP Cyclone V soc Q7 SOM Dual Cortex A9+FPGA Commercial Automotive Industrial SODIMM SOM MXM SOM Q7 SOM ---------------------Multicore ARM Cortex A9 ----------------- Contact: ------------------------------------------------------------------ -------------------------------------------------------------------------------------- Renesas RZ/G1M, G1N Q7 SOM i.MX8 Q7 SOM Arria10 SoC SOM ARM Dual Cortex A15 APQ 8096 Q7 SOM Feature Rich & performance Cost & power Optimized GNS-GmbH reserves all rights to this document and the information contained herein. Products, names and logos described herein may in whole or in part be subject to UNITRONIC AG GmbH UNITRONIC intellectual property rights. The information contained herein is provided “as is”. Mündelheimer Weg Weg 99 Mündelheimer No warranty of any kind is made in relation to the content of this document. 40472 Düsseldorf Düsseldorf 40472 This document may be revised by GNS-GmbH at any time. Copyright © 2014, GNS-GmbH, Adenauerstr. 18, 52146 Würselen, Germany Room 303, 3/F, St. George´s Building 2 Ice House Street, Central Hong Kong ELECTRONICS www.gns-gmbh.com