Transcript
Universal Control 1.7 Release Notes This update to Universal Control adds new features and fixes bugs in the previous release. New features include Smaart™ wizards for the StudioLive™ 16.4.2 and 24.4.2 mixers, which will assist the user in analyzing their system, verifying proper output connections, and automatically setting correct delay time for speaker connected to the Subgroup Outputs.
The Universal Control 1.7 update includes drivers and control panels for the following products: ● ● ● ● ● ● ●
FireStudio Mobile™ (Launch Window, Device Mixer, Driver) FireStudio Project™ (Launch Window, Device Mixer, Driver) FireStudio Tube™ (Launch Window, Device Mixer, Driver) FireStudio Lightpipe™ (Launch Window, Device Mixer, Driver) StudioLive™ 16.0.2 (Launch Window, Virtual StudioLive, Driver) StudioLive 16.4.2 (Launch Window, Virtual StudioLive, Driver) StudioLive 24.4.2 (Launch Window, Virtual StudioLive, Driver)
StudioLive firmware and build information: ● ● ●
16.0.2: Firmware Version - 0.98f, build - 219 16.4.2: Firmware Version - 1.50a, build - 190 24.4.2: Firmware Version - 1.0, build - 194
Driver Version: 4.0.0.14255 Universal Control Build: 5451
Universal Control 1.7 Supports the following Operating Systems: ● ● ● ● ● ●
Windows Vista Service Pack 2 (32 bit & 64 bit) Windows 7 Service Pack 1 (32 bit & 64 bit) Windows 8 (32 bit & 64 bit) OS X 10.6.8 (Snow Leopard) OS X 10.7.5 (Lion) OS X 10.8 (Mountain Lion)
Note: Included with the UC 1.7 release is a new uninstaller for Mac, which eliminates the need to manually remove files and folders. This uninstaller will remove all Universal Control files and folders on Mac OS X versions supported with this release.
Current App versions compatible with this Universal Control release: ● ●
SL Remote 1.4 for iPad® QMix 1.2 for iPhone® and iPod Touch®
The Following iOS Devices are Compatible with SL Remote: ● ● ● ●
iPad (1st generation running iOS 4 or later) iPad (2nd generation running iOS 5 or later) iPad (3rd generation running iOS 5 or later) iPad 4rd generation & iPad Mini (NOTE: PreSonus QA has not currently tested these devices, however according Apple there is no reason why these devices should not be supported)
The Following iOS Devices are Compatible with QMix (running iOS 5 or later): ● ● ● ● ● ● ●
iPhone 3GS iPhone 4 iPhone 4S iPhone 5 (The App will center on the screen. A future update will allow QMix to fill the entire iPhone 5 screen) iPod Touch 3G iPod Touch 4G iPod Touch 5th Generation (The App will center on the screen. A future update will allow QMix to fill the entire iPhone 5 screen)
Universal Control Version 1.7 Does Not Support the Following Products or Operating Systems: ● ● ●
FireStudio [26x26] Versions of OS X 10.6 (Snow Leopard) earlier than 10.6.8 Versions of OS X 10.7 (Lion) earlier than 10.7.4
Universal Control 1.7 Includes the Following Feature Updates to Virtual StudioLive for StudioLive 16.4.2 & StudioLive 24.4.2 Mixers (Remote Controllable from SL Remote 1.4): ●
SMAART Room Analysis Wizard: - Guides you through the steps necessary to generate a frequency response trace of your room - No complicated routing - Basic [Single Point] and Advanced [Multiple Point] options
●
SMAART System Delay Wizard: - Calculates and sets the correct delay time for any delay tower or backfill connected to a subgroup out - Delay systems from Main outs, Aux outs, or another delayed Subgroup out
●
SMAART Output Check Wizard: - Verifies correct output connectivity by routing a momentary burst of pink noise
- OHCI Tool visibility (PC Only)
SL Remote 1.4 Includes the Following Feature Updates: ● ●
Remote Control over all VSL Smaart wizard functions Smaart wizards can be launched from the SL Remote “Settings” Page
QMix 1.2 Includes the Following Feature Updates: ●
User lockout while Smaart wizards are running
Note: An indication screen will appear for QMix users when the Smaart wizards are running to let them know that they cannot control the board while the Smaart wizard(s) are is use. Control over personal mixes will resume automatically when the Smaart wizard(s) are no longer running.
Universal Control 1.7 Resolves the Following Issue(s): ● ● ● ● ● ●
Fixed an issue in which Scribble strip scenes did not load into the VSL scribble strip alone Fixed an issue where Auxiliary Inputs were Reversed Fixed a graphic display issue with the VSL browser window Fixed an issue where the PC Uninstaller was not removing all necessary files Fixed an issue where control panel was not dislaying on standard sized displays Fixed an issue on SL2442 where audio would not pass after FX A was set to Mono Effect and FX B was set to Plate Reverb effect
SL Remote 1.4 Resolves the Following Issue(s): ● ● ●
Fixed an issue in which Scribble strip scenes did not load into the VSL scribble strip alone Fixed an issue where the parameter for the Ambience FX appears even though a different effect is selected Fixed an issue where non-Western characters in the name of an iOS device would cause SL Remote to not launch
QMix 1.2 Resolves the Following Issue(s): ●
Fixed an issue where non-Western characters in the name of an iOS device would cause QMix to not launch
Known Issue ●
Non-Western Characters in the name of iOS device will show up in the VSL Remote Devices Section as ?????.
Universal Control Update Instructions: 1. Quit out of Universal Control and disconnect your unit from the computer. 2. Run the installer and follow the onscreen instructions. The installer requires that your computer be rebooted upon successful completion. 3. Once your computer has restarted, connect your FireStudio- or StudioLive-series device and open Universal Control.
Join our community of PreSonus users at http://forums.presonus.com/forums/list.page for information, user-based support, tips and tricks, and more!
