Transcript
SEE Security is an Australian owned and operated company. We pride ourselves in manufacturing and distributing a comprehensive range of products to serve the needs of the electronic, electrical and security industries. Our in-depth knowledge of the Australian CCTV and equipment and enclosure industries allow us to provide a range of intelligent and innovative solutions.
CONTENTS ENVIRONMENTAL HOUSINGS ECO & ECOSS LPAR400 & LPAR400SS LPAR480 LPAR600
4 5 6 7
EXTERNAL DOME HOUSINGS RMDHWP & RMDHWP300 LP235 LP300 SA220 SS220
8 9 10 11 12
INTERNAL DOME HOUSINGS RMDH & RMDH300 RM150 RM180 CMDH SP300 & SP300D
13 14 15 16 17
CORRECTIONAL SERVICES HOUSINGS TH SERIES CMH SERIES CMH02WM CMH02WP CMH02WMWP CMH03 CMSW01
18 19 20 21 22 23 24
WEDGE HOUSINGS SMW5 & SMW5SS SMW5PM & SMW5PMSS SMW5PMPT & SMW5PMPTSS RMW5 & RMW5SS RMW2 SMW1 SMW2 SMW3
25 26 27 28 29 30 31 32
RACK ENCLOSURES ERC6
33
Dropper Kits
35
Mounting Guides
36
Mounting Accessories
38
Housing Dimensions Environmental Housings External Dome Housings Internal Dome Housings Correctional Services Housings Wedge Housings Rack Enclosures
40 41 42 43 44 46
Mounting Plates
47
Index
50
3
ECO ENVIRONMENTAL HOUSING IP66 Outdoor camera housing for general purpose applications. The ECO housing is designed to accommodate 1/4” to 1/3” CCD cameras fitted with fixed and zoom lenses. The camera lens combination, up to the recommended maximum length, allows at least 100mm clear space behind the camera for connections. The pivoting lid swings clear of the lens to allow camera access and set up with the cover open. In this design the installer has full access to the sides, top and rear of the camera and lens. The camera is mounted on a clamped plate for fast install and removal. OPTIONS
SPECIFICATIONS
A pole mount adaptor, tamper switch, demister heater and fan are optional with the ECO housing. ECO is also available in powder coated zinc anneal (ECO) for economy and powder coated 304 stainless steel (ECOSS) finish for corrosive environments. Comes complete with manual pan tilt and wall bracket.
Construction ECO- 1.2mm 1.6mm & 2.0mm zincanneal ECOSS- 1.2mm & 1.6mm stainless steel.
Refer to Mounting Guide on page 36 and Housing Dimensions on page 40.
APPLICATIONS Mounted off poles, building walls or in factories. The ideal economical robust general purpose camera housing.
Finish ECO- Mossvale sands (light beige) polyester powder coat. ECOSS- White polyester powder coat. Lens 4.8mm arris edged glass. Cable Entry 3 x 20mm entries, two in the base and one positioned at the rear of the housing. Access 3 x 6mm pan head screws. Electrical Optional heater thermostat 24 VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Alternate voltages available.
ENVIRONMENTAL
Max. Camera Size 220mm (L) x 115mm (W) x 86mm (H).
4
A
A
ECO
ECOSS
Weight ECO- 4.5kg ECOSS- 4.7kg
PART NUMBER
DESCRIPTION
ECO
External housing complete with wall mount bracket and manual pan tilt bracket.
ECOSS
Stainless steel housing complete with wall mount bracket and manual pan tilt bracket.
ECOSEC
3 x M6 security screws and allen key for added security.
FANHTR
Fan heater to suit ECO & LPAR series housings.
HTR
Heater thermostat to suit ECO & LPAR400 housings.
TSW
Tamper switch to suit ECO & LPAR series housings.
LPAR400 ENVIRONMENTAL HOUSING IP66 Outdoor camera housing for general purpose and corrosive applications. Available in a powder coated zincanneal/aluminium combination for general purpose use. For installations in more corrosive environments- powder coated stainless steel is also available. The LPAR range of housings are designed to accommodate 1/4” to 1/3” CCD camera fitted with fixed and zoom lenses. There is a 100mm clear space behind the camera for connections when the maximum camera lens combination is used. SPECIFICATIONS
OPTIONS
Construction LPAR400- 1.6mm zincanneal body, aluminium sun shield. LPAR400SS- 1.2mm stainless steel.
Choose from the heavy duty wall bracket, extended wall bracket, wire through wall bracket/pan tilt or pole mount to suit your particular purpose. The mounting brackets and pan tilts are a separate item and are not included in the price of the housing in this series.
Lens 4.8mm arris edged safety glass. Optional 6.0mm polycarbonate. Cable Entry 4 x 20mm knockouts, supplied with 2 x 20mm compression glands and 2 x 20mm grommets. Access 4 x 6.0mm stainless steel post cap security screws. Electrical Optional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Washer/wiper 24VAC 50Hz. Alternate voltages available. Max. Camera Size 284mm (L) x 135mm (W) x 86mm (H). 120mm height available with custom camera sled.
Heater thermostat, fans, washer/wiper, a range of tamper switches, mounting brackets, pan tilts and security locking devices are optional with the LPAR400 & LPAR400SS. Refer to Mounting Guide on page 36 and Housing Dimensions on page 40.
APPLICATIONS Mounted off poles, building walls or in factories. Also ideal for use in mines.
Weight LPAR400- 3.9kg LPAR400SS- 4.2kg
PART NUMBER
DESCRIPTION
LPAR400
External housing for medium to large camera lens combinations.
LPAR400SS
Stainless steel external housing for medium to large camera lens combinations.
FANHTR
Fan heater to suit ECO & LPAR series housings.
HTR
Heater thermostat to suit ECO & LPAR400 housings.
TSW
Tamper switch to suit ECO & LPAR series housings.
A
A
LPAR400SS
LPAR400
ENVIRONMENTAL
Finish Mossvale sands (light beige) polyester powder coat.
5
LPAR480 ENVIRONMENTAL HOUSING IP66 Outdoor camera housing for general purpose applications. Available in a powder coated zincanneal for general purpose use. The LPAR range of housings are designed to accommodate 1/4” to 1/3” CCD camera fitted with fixed and zoom lenses. There is a 100mm clear space behind the camera for connections when the maximum camera lens combination is used.
OPTIONS
SPECIFICATIONS
The HDWMB3 and HDMPT2 wall bracket and manual pan tilt are the only standard mounting hardware available for the housing. These mounting brackets and pan tilts available as optional extras and are not included in the price of the housing.
Construction 1.6mm zincanneal body and sun shield.
Refer to Mounting Guide on page 36 and Housing Dimensions on page 40.
APPLICATIONS Mounted off poles, building walls or in factories. Also ideal for use in mines.
Finish Mossvale sands (light beige) polyester powder coat. Lens 4.8mm arris edged safety glass. Optional MR10 lexan. Cable Entry 2 x 20mm PVC cable compression glands and 2 blanking grommets. Access 2 x Southco stainless steel rotary clasps at the rear of the lid. Electrical Optional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Max. Camera Size 371 mm (L) x 178mm (W) at the camera platform reducing to 151mm at the inside top of the lid x 140 mm (H). 170 mm height available without the camera sled. Weight LPAR480- 8.9kg.
A ENVIRONMENTAL
LPAR480
6
PART NUMBER
DESCRIPTION
LPAR480
External housing complete with wall mount bracket and manual pan tilt bracket.
FANHTR480
Fan heater to suit LPAR480 housings.
TSW
Tamper switch to suit ECO & LPAR series housings.
LPAR600 ENVIRONMENTAL HOUSING IP66 Outdoor camera housing for light weight extra large camera and lens combinations. The LPAR600 housing is an indoor/outdoor general purpose housing manufactured from aluminium. The enclosure can house a large camera telephoto lens and is suitable for applications that demand higher levels of corrosion resistance. Pivoted lid construction as per ECO and LPAR series allows ease of camera set up. The camera is mounted on a clamped plate for fast installation and removal.
SPECIFICATIONS
OPTIONS
Construction 1.6mm aluminium body and sun shield.
Heater thermostat, fans, washer/wiper, a range of tamper switches and security locking devices are available.
Finish White polyester powder coat for the exterior with black texture for the interior of the lid to eliminate reflection.
Refer to Mounting Guide on page 36 and Housing Dimensions on page 40.
Lens 6.0mm arris edged safety glass. Optional MR10 Lexan. Cable Entry 2 x 20mm PVC cable compression glands and 2 blanking grommets. Access 2 x Southco stainless steel rotary clasps at the rear of the lid.
APPLICATIONS Suitable for along roads & highways and for surveillance at ports and airports.
Electrical Optional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Alternate voltages available. Max. Camera Size 460mm (L) x 225mm (W) at the camera platform reducing to 180mm at the inside top of the lid x 180mm (H). 170mm height available without the camera sled. Weight LPAR600- 5.45kg.
A
PART NUMBER
DESCRIPTION
LPAR600
External housing for large and extra large camera lens combinations.
FANHTR600
Fan heater to suit LPAR600 housings.
TSW
Tamper switch to suit ECO & LPAR series housings.
ENVIRONMENTAL
LPAR600
7
RMDHWP EXTERNAL DOME HOUSINGS IP66 General purpose recess mounted exterior dome housing suitable for fixed cameras. The RMDHWP series are exterior weatherproof dome housings. The standard back box is manufactured from aluminium. This range of housings are designed for CCD cameras and are recommended to a maximum length of 200mm for the RMDHWP and 280mm for the RMDHWP300. The size of the camera and lens that can be housed with the RMDHWP will be dependant on the angle of view of the camera. The camera mount bracket is universally adjustable and has a dual locking action to eliminate movement in high wind load conditions. Cable entry to the housing is through a 20mm PVC cable gland centrally mounted which also serves as the camera mount pivot. OPTIONS
SPECIFICATIONS
An additional dome liner which can mask the camera location is also available.
Construction 1.2mm aluminium body. Mild steel camera mount bracket.
Refer to Mounting Guide on page 37 and Housing Dimensions on page 41.
Finish Mossvale sands (light beige) polyester powder coat. Lens 3.0mm acrylic dome.
APPLICATIONS Ideal for under eaves or recess mount.
Cable Entry 1 x 20mm cable gland at top rear of housing. Access 2 x Southco stainless steel rotary clasps at the rear of the lid.
EXTERNAL DOME
Max. Camera Size RMDHWP- 200mm RMDHWP300- 280mm Maximum possible camera length will be dependant on angle of view required.
8
B
B
RMDHWP
RMDHWP300
Weight RMDHWP- 1.6kg. RMDHWP300- 1.95kg.
PART NUMBER
DESCRIPTION
RMDHWPT
250mm weatherproof dome with tinted lens.
RMDHWPC
250mm weatherproof dome with clear lens.
RMDHWP300T
300mm weatherproof dome with tinted lens.
RMDHWP300C
300mm weatherproof dome with clear lens.
RMLINER
250mm aluminium liner with viewing slot.
RMLINER300
300mm aluminium liner with viewing slot.
LP235 EXTERNAL DOME HOUSINGS Attractive and compact indoor/outdoor fixed camera dome housing. The LP235 has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan phillips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.
SPECIFICATIONS
OPTIONS
Construction 1.6mm aluminium.
Two wall mount brackets and a pendant adaptor are available for the housing. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.
Finish Black texture polyester powder coat on underside and pearl white on outer body. Lens 6.0mm acrylic. Cable Entry Through wall brackets and adaptors. Access M4 pan philips.
Wall brackets are designed to be used with SEE Security standard pole and corner mount adaptors. Refer to Mounting Guide on page 37 and Housing Dimensions on page 41.
APPLICATIONS
Electrical Optional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Alternate voltages available.
Designed for mounting off walls or directly from the ceiling.
Max. Camera Size 190mm. Maximum possible camera length will be dependant on angle of view required. Weight LP235- 1.95kg.
B PART NUMBER
DESCRIPTION
LP235T
190mm powder coated aluminium weatherproof dome with tinted lens.
LP235C
190mm powder coated aluminium weatherproof dome with clear lens.
EXTERNAL DOME
LP235
9
LP300 EXTERNAL DOME HOUSINGS Attractive and compact indoor/outdoor fixed camera dome housing. The LP300 has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan phillips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.
OPTIONS
SPECIFICATIONS
Two wall mount brackets and a pendant adaptor are available for the housing. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.
Construction 1.6mm aluminium.
Wall brackets are designed to be used with SEE Security standard pole and corner mount adaptors. Refer to Mounting Guide on page 37 and Housing Dimensions on page 41.
Finish Black texture polyester powder coat on underside and pearl white on outer body. Lens 6.0mm acrylic. Cable Entry Through wall brackets and adaptors. Access M6 pan philips.
APPLICATIONS Designed for mounting off walls or directly from the ceiling.
Electrical Optional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Alternate voltages available. Max. Camera Size 230mm. Maximum possible camera length will be dependant on angle of view required. Weight LP300- 2.70kg.
B EXTERNAL DOME
LP300
10
PART NUMBER
DESCRIPTION
LP300T
230mm powder coated aluminium weatherproof dome with tinted lens.
LP300C
230mm powder coated aluminium weatherproof dome with clear lens.
SA220 EXTERNAL DOME HOUSINGS Attractive and compact indoor/outdoor fixed camera dome housing. The SA220 housing has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan philips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.
SPECIFICATIONS
OPTIONS
Construction 1.6mm aluminium.
Two wall mount brackets and a pendant adaptor are available for the housings. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.
Finish Black texture polyester powder coat on underside and pearl white on outer body. Lens 3.0mm acrylic. Cable Entry Through wall brackets and adaptors. Access M4 pan philips. Max. Camera Size 180mm. Maximum possible camera length will be dependant on angle of view required.
Wall brackets are designed to be used with SEE Security standard pole and corner mount adaptors. PTZ minidome compatible options are available, allowing a common enclosure for installations where combinations of fixed and PTZ units are used. Tamper switches and lens liners are available as options. Refer to Mounting Guide on page 37, Dropper Kits on page 35 and Housing Dimensions on page 41.
APPLICATIONS
Weight SA220- 2.45kg.
Designed for mounting off walls or directly from the ceiling.
A PART NUMBER
DESCRIPTION
SA220T
220mm powder coated aluminium weatherproof dome with tinted lens.
SA220C
220mm powder coated aluminium weatherproof dome with clear lens.
TSW SASS220
Tamper switch to suit SA220 & SS220 housings only.
EXTERNAL DOME
SA220
11
SS220 EXTERNAL DOME HOUSINGS Attractive and compact indoor/outdoor fixed camera dome housing. The SS220 housing has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan philips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.
OPTIONS
SPECIFICATIONS
Two wall mount brackets and a pendant adaptor are available for the housings. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.
Construction 1.6mm stainless steel.
Wall brackets are designed to be used with SEE Security standard pole and corner mount adaptors. PTZ minidome compatible options are available, allowing a common enclosure for installations where combinations of fixed and PTZ units are used. Tamper switches and lens liners are available as options. Refer to Mounting Guide on page 37, Dropper Kits on page 35 and Housing Dimensions on page 41.
APPLICATIONS Designed for mounting off walls or directly from the ceiling.
Finish Polished stainless steel outer body, black texture polyester powder coat on underside and interior of body. Lens 3.0mm acrylic. Cable Entry Through wall brackets and adaptors. Access M4 pan philips. Max. Camera Size 180mm. Maximum possible camera length will be dependant on angle of view required. Weight SS220- 3.45kg.
A EXTERNAL DOME
SS220
12
PART NUMBER
DESCRIPTION
SS220T
220mm stainless steel weatherproof dome with tinted lens.
SS220C
220mm stainless steel weatherproof dome with clear lens.
TSW SASS220
Tamper switch to suit SA220 & SS220 housings only.
RMDH INTERNAL DOME HOUSINGS Interior recess mounted dome housing for in-ceiling applications. The RMDH series are designed to accommodate fixed CCD cameras. The size of the camera will ultimately be dependant on the angle of view. Construction of the enclosure incorporates an aluminium back box, adjustable camera bracket and dome lens. Clear and tinted lenses are available, secured by spring clips that allow 360 degree rotation of the lens on the housing. The fully adjustable camera bracket, allows full use of the dome surface should it become scratched, and ease of camera set up on installation. Cable entry to the housing is through a 20mm PVC cable gland centrally mounted which also serves as the camera mount pivot. SPECIFICATIONS
OPTIONS
Construction 1.2mm aluminium body, mild steel camera mount bracket.
A dome liner can be used to hide the camera position within the dome and is an economic alternative to a painted lens.
Finish Black texture powder coat in standard housing. Lens 3.0mm acrylic dome in clear or 332 tint. Cable Entry 1 x 20mm PVC cable gland at top rear of the housing.
When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RMDHC. Refer to Dropper Kits on page 35 and Housing Dimensions on page 42. APPLICATIONS
Max. Camera Size RMDH- 200mm. RMDH300- 280mm. Maximum possible camera length will be dependant on angle of view required. Weight RMDH- 1.5kg. RMDH300- 1.9kg.
PART NUMBER
DESCRIPTION
RMDHT
250mm dome housing with tinted lens.
RMDHC
250mm dome housing with clear lens.
RM LINER
250mm aluminium liner with viewing slot.
RMDH300T
300mm dome housing with tinted lens.
RMDH300C
300mm dome housing with clear lens.
RM300 LINER
300mm aluminium liner with viewing slot.
Indoor housings for recess mounted, in-ceiling applications.
B
B
RMDH300
RMDH
INTERNAL DOME
Access 3 x spring clips.
13
RM150 INTERNAL DOME HOUSINGS Interior recess mounted dome housing for in-ceiling applications. The RM150 is a compact recess mounted dome camera housing. Construction of the RM150 incorporate a cloth back box, metal frame, lens and adjustable camera bracket. The versatile adjustable camera bracket in the housing offers a better view compared with other similar housings on the market. This flexibility allows the camera to be aligned to and in contact with the dome lens in almost any viewing position, thus improving picture quality by reducing reflection and distortion. It should be noted that with smaller dome housings, angles of view approaching parallel to the ceiling cannot be achieved. This is due to the camera not being able to drop down into the lens where the optics are suitable. The upper section of the lens that allows this to occur is not suitable for clear images. As a guide, 29 degrees down angle to the ceiling is the maximum recommended. OPTIONS
SPECIFICATIONS
When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RM150T. Refer to housing Dimensions on page 42.
Construction 0.9mm mild steel back body. Aluminium ceiling trim ring and 2.0mm mild steel camera bracket. Flame retardant cotton back cover.
APPLICATIONS
Finish Ceiling white polyester powder coat for the ceiling trim ring. Black texture for the back box and internal assembly in standard housing.
This model is ideal for installations with low ceiling height.
Lens 3.0mm acrylic dome 332 tint. Access 2 x M4 pan round head screws. Max. Camera Size 190mm. Maximum possible camera length will be dependant on angle of view required and ceiling thickness. Weight RM150- 1.0kg.
A INTERNAL DOME
RM150
14
PART NUMBER
DESCRIPTION
RM150T
150mm recess mounted dome housing with tinted lens.
RM150C
150mm recess mounted dome housing with clear lens.
RM180 INTERNAL DOME HOUSINGS Interior recess mounted dome housing for in-ceiling applications. The RM180 is a compact recess mounted dome camera housing. Construction of the RM180 incorporate a cloth back box, metal frame, lens and adjustable camera bracket. The versatile adjustable camera bracket in the housing offers a better view compared with other similar housings on the market. This flexibility allows the camera to be aligned to and in contact with the dome lens in almost any viewing position, thus improving picture quality by reducing reflection and distortion. It should be noted that with smaller dome housings, angles of view approaching parallel to the ceiling cannot be achieved. This is due to the camera not being able to drop down into the lens where the optics are suitable. The upper section of the lens that allows this to occur is not suitable for clear images. As a guide, 29 degrees down angle to the ceiling is the maximum recommended. SPECIFICATIONS
OPTIONS
Construction 0.9mm mild steel back body. Aluminium ceiling trim ring and 2.0mm mild steel camera bracket. Flame retardant cotton back cover.
When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RM180T.
Finish Ceiling white polyester powder coat for the ceiling trim ring. Black texture for the back box and internal assembly in standard housing. Lens 3.0mm acrylic dome 332 tint. Access 2 x M4 pan round head screws. Max. Camera Size 190mm. Maximum possible camera length will be dependant on angle of view required and ceiling thickness.
A dome liner can be used to hide the camera position within the dome and is an economic alternative to a painted lens. Refer to housing Dimensions on page 42.
APPLICATIONS This model is ideal for installations with low ceiling height.
Weight RM180- 1.5kg.
A
PART NUMBER
DESCRIPTION
RM180T
180mm recess mounted dome housing with tinted lens.
RM180C
180mm recess mounted dome housing with clear lens.
RM180 LINER
180mm aluminium liner with viewing slot.
INTERNAL DOME
RM180
15
CMDH INTERNAL DOME HOUSINGS Interior surface mount dome housing for on-ceiling applications. Stylish surface mount aluminium back box and trim ring dome housing allows a professional finish for on ceiling installations without the excessive size required for acrylic dome only to cover the camera and bracket. The CMDH is designed to accept the standard RMLINER which hides camera position and has the added benefit of a rotating 360 degree lens. This allows the lens to be repositioned should it become damaged in the viewing area. This option provides an economic alternative to painted lenses.
OPTIONS
SPECIFICATIONS
When ordering place ‘C’ for clear or ‘T’ for tinted at the end of the part number. eg: CMDHT. A tinted housing will be supplied should a preference not be stated.
Construction 1.2mm aluminium.
Refer to housing Dimensions on page 42.
Finish Ceiling white exterior and black texture interior polyester powder coat. Lens 3.0mm acrylic dome in clear or 332 tint.
APPLICATIONS The CMDH is ideal for on-ceiling applications where recessing is not an option and reduced installation costs are important.
Access 3 x M4 pan head screws. Max. Camera Size 190mm. Weight CMDH- 1.8kg.
A INTERNAL DOME
CMDH
16
PART NUMBER
DESCRIPTION
CMDHT
250mm on-ceiling mounted dome enclosure with clear lens.
CMDHC
250mm on-ceiling mounted dome enclosure with tinted lens.
RM LINER
250mm aluminium liner with viewing slot.
CMSK
Security kit. 33 x post button security screws- M4 to suit CMDH only.
SP300 INTERNAL DOME HOUSINGS Interior pendant dome housing. The SP300 range of 300mm diameter pendant domes are designed to house CCD camera installations that have high ceilings where there is plenty of space. Ideal for supermarket aisles and warehouse projects. The lens and fully adjustable camera bracket design are similar to the RMDH series and allow full use of the dome surface (360 degrees) should it become scratched. A dummy version of the model is also available- SP300D.
SPECIFICATIONS
OPTIONS
Construction 1.2mm Aluminium body, mild steel camera mount bracket.
An aluminium slotted liner is available to hide camera direction while allowing use of clear or lightly tinted lens, improving camera performance.
Finish White polyester powder coat with black texture interior in standard housing. Lens 3.0mm acrylic dome 332 tint or solid black for SP300D. Access 4 x spring clips. Max. Camera Size 280mm. Maximum possible camera length will be dependant on angle of view required.
Refer to Dropper Kits on page 35 and Housing Dimensions on page 42.
APPLICATIONS Indoor housing used to mount directly off ceilings using a mounting pole. Used in supermarkets and aisles.
PART NUMBER
DESCRIPTION
SP300T
300mm pendant dome with tinted lens.
SP300C
300mm pendant dome with clear lens.
SP300D
300mm dummy dome with black acrylic lens, camera mount not included.
RM300 LINER
300mm aluminium liner with viewing slot.
C
C
SP300D
SP300
INTERNAL DOME
Weight SP300- 2.55kg. SP300D- 1.95kg.
17
TH SERIES CORRECTIONAL SERVICES HOUSINGS Secure triangular corner mount housings to suit PCB and conventional cameras commonly used in Correctional Service environments. The cover is recess mounted into the steel frame ensuring that tools cannot be inserted to prise the lens away from the housing. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues. New bracket design for the 485 and 600 models allows easier adjustment and more positive locking action for the camera. The CMH01 & CMH02 accept similar sized cameras as the TH485 & TH600 in a more compact housing when space is limited. OPTIONS
SPECIFICATIONS
All housings are supplied with adjustable camera mounts. Tamper and vibration sensing switches are available for all models.
Construction 1.6mm zincanneal.
APPLICATIONS
Lens 6.0mm polycarbonate.
Correctional services housings designed to fit in corners, against the ceiling.
Finish Black texture polyester powder coat in standard housing.
Access M6 post cap security screws. Cable Entry Open triangular space at top rear of the housing. Max. Camera Size Refer to ‘B’ dimension for overall depth details.
B A
C
B
B
C
TH242
TH300
TH485
TH600
TH724
CORRECTIONAL SERVICES
C
18
PART NUMBER
Model Number
Dimension A
Dimension B
TH242
242mm
75mm
TH300
300mm
92mm
TH485
485mm
130mm
TH600
600mm
228mm
TH724
724mm
290mm
DESCRIPTION
WEIGHT
TH242
242mm triangular housing.
1.0kg
TH300
300mm triangular housing.
1.2kg
TH485
485mm triangular housing.
4.1kg
TH600
600mm triangular housing.
6.0kg
TH724
724mm triangular housing.
10.0kg
TSWTH
Tamper switch to suit TH485, 600 & 724 housings.
CMH SERIES CORRECTIONAL SERVICES HOUSINGS Corner mount high security enclosures. The CMH Series of corner mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues. CMH01 & CMH02 enclosures are compact body corner mount enclosures taking up less space than triangular housings that enclose similar sized cameras. The CMH02WM (wall mount) model has been designed for this range to meet the demand for similar enclosures that mount to walls up against the ceiling. The CMH02SS is a polished stainless steel version of the standard enclosure, often selected for use in elevators and applications where the finish suits the environment. The CMH01 is sized for compact cameras eg: Watec and Elmo whereas the CMH02 is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami. SPECIFICATIONS
OPTIONS
Construction CMH01 & CMH02- 1.6mm zincanneal. CMH02SS- 1.6mm stainless steel.
All housings are supplied with adjustable camera mounts. Tamper switches are available for all models as an optional extra.
Finish CMH01 & CMH02- Graphite ripple polyester powder coat. CMH02SS- Polished stainless steel.
Refer to housing Dimensions on page 43.
Lens 6.0mm polycarbonate.
APPLICATIONS
Access 3 x M6 post cap security screws.
Correctional services housings designed for indoor and outdoor yards.
PART NUMBER
DESCRIPTION
WEIGHT
CMH01
Corner mount housing.
2.85kg
CMH02
Corner mount housing.
4.55kg
CMH02SS
Polished stainless steel corner mount housing.
4.45kg
TSW CMH02
Tamper switch to suit all CMH02 models.
C
A
B
CMH02SS
CMH02
CMH01
CORRECTIONAL SERVICES
Max. Camera Size CMH02 & CMH02SS- 190mm. Maximum camera size is dependant on the angle of view required.
19
CMH02WM CORRECTIONAL SERVICES HOUSINGS Ceiling wall mount high security enclosure. The CMH Series of corner mount and CMH02WM wall mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues. The CMH02WM is a compact body ceiling wall mount enclosure taking up less space than triangular housings that enclose similar sized cameras. This product is designed to be wall mounted with the top positioned against the ceiling. The CMH02WM is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami. OPTIONS
SPECIFICATIONS
All housings are supplied with adjustable camera mounts. Tamper switches are available for all models as an optional extra.
Construction 1.6mm zincanneal.
Refer to housing Dimensions on page 43.
Finish Graphite ripple polyester powder coat.
APPLICATIONS
Lens 6.0mm polycarbonate.
Correctional services housing for mounting against ceiling and wall.
Access 3 x M6 post cap security screws. Cable Entry 1 x 20mm opening on back panel. Max. Camera Size 190mm. Maximum camera size is dependant on the angle of view required. Weight CMH02WM- 4.85kg.
B CORRECTIONAL SERVICES
CMH02WM
20
PART NUMBER
DESCRIPTION
CMH02WM
Corner mount housing.
TSW CMH02
Tamper switch to suit all CMH02 models.
CMH02WP CORRECTIONAL SERVICES HOUSINGS Corner mount high security enclosures. The CMH02WP is a weatherproof enclosure designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues. The CMH02WP is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.
SPECIFICATIONS
OPTIONS
Construction 1.6mm zincanneal.
All housings are supplied with adjustable camera mounts. Tamper switches are available for all models as an optional extra.
Finish Graphite ripple polyester powder coat. Lens 6.0mm polycarbonate. Access 3 x M6 post cap security screws. Cable Entry 1 x 20mm opening on back panel.
Refer to housing Dimensions on page 43.
APPLICATIONS Correctional services housing for mounting against ceiling and wall.
Max. Camera Size 190mm. Maximum camera size is dependant on the angle of view required. Weight CMH02WP- 4.65kg.
B
PART NUMBER
DESCRIPTION
CMH02WP
Corner mount weatherproof housing.
TSWCMH02
Tamper switch to suit all CMH02 models.
CORRECTIONAL SERVICES
CMH02WP
21
CMH02WMWP CORRECTIONAL SERVICES HOUSINGS Weatherproof ceiling wall mount high security enclosure. The CMH Series of wall mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues. The CMH02WMWP is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.
OPTIONS
SPECIFICATIONS
All housings are supplied with adjustable camera mounts. Tamper switches are available for all models as an optional extra.
Construction 1.6mm zincanneal.
Refer to housing Dimensions on page 43.
Finish Graphite ripple polyester powder coat. Lens 6.0mm polycarbonate.
APPLICATIONS Weatherproof ceiling wall mount housing for correctional services applications.
Access 12 x M6 countersunk post cap security screws. Cable Entry 1 x 20mm opening on back panel. Max. Camera Size 190mm. Maximum camera length will be dependant on the angle of view required. Weight CMH02WMWP- 4.6kg.
C CORRECTIONAL SERVICES
CMH02WMWP
22
PART NUMBER
DESCRIPTION
CMH02WMWP
Wall mount weatherproof housing.
TSWCMH02
Tamper switch to suit all CMH02 models.
CMH03 CORRECTIONAL SERVICES HOUSINGS Corner mount high security enclosure. The CMH03 is designed for Correctional Centre applications. Featuring rugged constuction, tamper resistance and with no center projections, the enclosure limits self harm issues. CMH03 is a compact body corner mount enclosure, taking up less space than the triangular housings. The enclosure features increased lens angles that allow wide angle lenses to view directly below the housing. The CMH03 is suitable for 3 x 3m as well as larger rectangular holding cells. This housing is designed to suit standard and larger cmaera and lens combinations such as Panasonic, Sony and Ikegami. SPECIFICATIONS
OPTIONS
Construction 1.6mm zincanneal.
All Correctional Services housings are supplied with adjustable camera mounts. Tamper switches are available as an optional extra.
Finish Black texture polyester powder coat. Lens 6.0mm polycarbonate. Access 8 x M6 post cap security screws. Cable Entry Opening on back panel.
Refer to housing Dimensions on page 43.
APPLICATIONS Corner mount housing for Correctional Services applications.
Max. Camera Size For PCB cameras only. Weight CMH03- 0.7kg.
A
PART NUMBER
DESCRIPTION
CMH03
Corner mount housing.
TSW CMH03
Tamper switch to suit CMH03 model housing.
CORRECTIONAL SERVICES
CMH03
23
CMSW01 CORRECTIONAL SERVICES HOUSINGS Wall mount high security enclosures for PCB cameras. The CMSW01 enclosure suits Correctional services and police stations. The CMSW01 wall ceiling mount has been designed for along walls at the junction with the ceiling. Sized to suit a range of PCB cameras, the CMSW01 is supplied without a camera mount bracket due to the range of PCB cameras available. Brackets are available for a limited number of current cameras. We suggest you fax or email details of your camera when ordering. APPLICATIONS
SPECIFICATIONS
Wall and ceiling mount housing for correctional services applications.
Construction 1.6mm zincanneal.
Refer to housing Dimensions on page 43.
Finish Black texture polyester powder coat. Lens 6.0mm polycarbonate. Access 8 x M6 post cap security screws. Cable Entry Opening on back panel. Max. Camera Size For PCB cameras only. Weight CMSW01- 0.7kg.
C CORRECTIONAL SERVICES
CMSW01
24
PART NUMBER
DESCRIPTION
CMSW01
Wall mount housing for PCB cameras.
SMW5 WEDGE HOUSINGS Weatherproof surface mount wedge housing. IP66 Outdoor wedge housings for high security applications where corrosion resistance and mechanical strength are required. Manufactured from powder coated zinc plated steel the SMW5 offers a single keylock and dual captive security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit. There are three modules available in this range, the SMW5 surface mount, the SMW5PMPT pan tilt pole top and the SMW5PM pole top. The SMW5 has a range of camera adjustments. It is an attractive enclosure that suits a variety of mounting applications for larger camera and lens combinations. It is also weatherproof and highly vandal, corrosive and tamper resistant. SPECIFICATIONS
OPTIONS
Construction SMW5- 2.5mm zinc plated powder coated mild steel. SMW5SS- 2.0mm 304 grade stainless steel.
Omron tamper switch and mercury vibration switch are available as options. Fixed angle pole top adaptor, heater, high security locking system (bi-lock)and wall bracket are available mounting accessories.
Finish SMW5- Mossvale sands (light beige) polyester powder coat. SMW5SS- White polyester powder coat. Lens 6.0mm polycarbonate.
Refer to housing Dimensions on page 44.
APPLICATIONS
Access 4 x 6.0mm stainless steel security screws plus one Selectrix coin keylock as standard. Optional bi-lock high security key lock.
Car parks, under eaves, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.
Cable Entry 2 x 20mm entries.
Weight SMW5- 6.4kg. SMW5SS- 5.15kg.
PART NUMBER
DESCRIPTION
SMW5
Surface mount weatherproof zinc plated mild steel housing.
SMW5SS
Surface mount waterproof stainless steel wedge housing.
HTR
Heater thermostat to suit all SMW5 housings.
TSW SMW5
Tamper switch to suit all SMW5 housings.
BILOCK
High security locking system to suit all SMW5 housings.
B
A
SMW5SS
SMW5
WEDGE HOUSING
Max. Camera Size 265mm.
25
SMW5PM WEDGE HOUSINGS Weatherproof pole and wall mount wedge housings. IP66 Outdoor wedge housings for high security applications where corrosion resistance and mechanical strength are required. The SMW5PM & SMW5PMSS are manufactured from either powder coated zinc plated steel or stainless steel. The pole mounted enclosure allows the angled face of the bracket to offer additional downward tilt for closer, tighter angles of view. The SMW5PM & SMW5PMSS are attractive, weatherproof enclosures which are also highly vandal, corrosive and tamper resistant.
OPTIONS
SPECIFICATIONS
Omron tamper switch and mercury vibration switch are available as an option. Fixed angle pole top adaptor, heater high security locking system (bi-lock), wall bracket.
Construction SMW5PM- 2.5mm zinc plated steel. SMW5PMSS- 2.0mm 304 grade stainless steel.
Refer to housing Dimensions on page 44.
Finish SMW5PM- Mossvale sands (light beige) polyester powder coat. SMW5PMSS- White polyester powder coat.
APPLICATIONS
Lens 6.0mm polycarbonate.
Car parks, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.
Access 4 x 6.0mm stainless steel security screws plus one Selectrix coin keylock as standard. Optional bi-lock high security key lock. Cable Entry 2 x 20mm entries. Max. Camera Size 265mm.
WEDGE HOUSING
Weight SMW5PM- 8.6kg. SMW5PMSS- 7.1kg.
26
B
C
SMW5PM
SMW5PMSS
PART NUMBER
DESCRIPTION
SMW5PM
Fixed tilt weatherproof pole top wedge housing to suit 76.1mm maximum pole diameter.
SMW5PMSS
Fixed tilt weatherproof pole top wedge housing to suit 76.1mm maximum pole diameter. Stainless steel construction.
HTR
Heater thermostat to suit all SMW5 housings.
TSW SMW5
Tamper switch to suit all SMW5 housings.
BILOCK
High security locking system to suit all SMW5 housings.
SMW5PMPT WEDGE HOUSINGS Weatherproof pole and wall mount wedge housings. IP66 Outdoor wedge housings for high security applications where corrosion resistance and mechanical strength are required. The SMW5PMPT & SMW5PMPTSS are attractive, weatherproof enclosures constructed from either powder coated zinc plated steel or stainless steel. The housings pan tilt feature allows for a wide range of camera adjustments for different angles of view. The enclosures are also highly vandal, corrosive and tamper resistant.
SPECIFICATIONS
OPTIONS
Construction SMW5PMPT- 2.5mm zinc plated steel SMW5PMPTSS- 2.0mm 216 grade stainless steel.
Omron tamper switch and mercury vibration switch are available as an option. Fixed angle pole top adaptor, heater high security locking system (bi-lock), wall bracket.
Finish SMW5PMPT- Mossvale sands (light beige) polyester powder coat. SMW5PMPTSS- White polyester powder coat. Lens 6.0mm polycarbonate.
Refer to housing Dimensions on page 44.
APPLICATIONS
Access 4 x 6.0mm stainless steel security screws plus one Selectrix coin keylock as standard. Optional bi-lock high security key lock.
Car parks, under eaves, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.
Cable Entry 2 x 20mm entries. Max. Camera Size 265mm.
PART NUMBER
DESCRIPTION
SMW5PMPT
Adjustable pan & tilt weatherproof pole top wedge housing to suit 76.1mm maximum pole diameter.
SMW5PMPTSS
Adjustable pan & tilt weatherproof pole top housing to suit 76.1mm maximum pole diameter. Stainless steel construction.
HTR
Heater thermostat to suit all SMW5 housings.
TSW SMW5
Tamper switch to suit all SMW5 housings.
BILOCK
High security locking system to suit all SMW5 housings.
C
C
SMW5PMPTSS
SMW5PMPT
WEDGE HOUSING
Weight SMW5PMPT- 8.44kg. SMW5PMPTSS- 7.40kg.
27
RMW5 WEDGE HOUSINGS Recess mounted wedge housing. Interior recess mounted wedge housing for ceiling mount applications where vandalism is likely. The RMW5 is manufactured from powder coated zinc plated steel while the RMW5SS is the stainless steel alternative. The enclosure offers a single keylock and dual captive security screw access. The RMW5 & RMW5SS are large attractive housings that are weatherproof and highly vandal, corrosive and tamper resistant. The key features of the RMW5 are the range of camera adjustments and the inbuilt ceiling fastening system. Ceiling cutout dimensions measure at 212mm (W) x 380mm (L). OPTIONS
SPECIFICATIONS
Recess mount only.
Construction RMW5- 2.5mm zinc plated steel body and 2.0mm stainless steel base. RMW5SS- 2.0mm 304 grade stainless steel and 2.0mm stainless steel base.
Refer to housing Dimensions on page 44.
Finish Mossvale sands (light beige) polyester powder coat.
APPLICATIONS Corridors, entrances and lower height applications where dome enclosures may prove to be vulnerable to attack.
Lens 6.0mm polycarbonate. Access 4 x 6.0mm stainless steel security screws plus one Selectrix coin keylock as standard. Optional bi-lock high security key lock. Cable Entry 2 x 20mm entries.
WEDGE HOUSING
Max. Camera Size 265mm.
28
C
C
RMW5
RMW5SS
Weight RMW5- 9.55kg. RMW5SS- 8.0kg.
PART NUMBER
DESCRIPTION
RMW5
Zinc plated steel recessed mount wedge housing.
RMW5SS
Stainless steel recessed mount wedge housing.
RMW2 WEDGE HOUSINGS Recess mounted wedge housing. Interior recess mounted wedge housing for ceiling mount applications where vandalism is likely. While being smaller than the RMWH that it replaced, the RMW2 offers a single security screw access and far easier camera access and adjustment. The key features of the RMW2 are the range of camera adjustments and the inbuilt ceiling fastening system.
SPECIFICATIONS
OPTIONS
Construction 1.2mm zincanneal.
Omron tamper switch is available as an option.
Finish Mossvale sands (light beige) polyester powder coat lid and black texture base. Lens 6.0mm polycarbonate. Access 1 x 6mm stainless steel security screw.
Refer to housing Dimensions on page 45.
APPLICATIONS Corridors, entrances and lower height applications where dome enclosures may prove to be vulnerable to attack.
Cable Entry 4 x 20mm entries, two at the rear, one in each side and one positioned at the top rear. Max. Camera Size 190mm. Weight RMW2- 1.9kg.
A PART NUMBER
DESCRIPTION
RMW2
Recessed mount wedge housing.
WEDGE HOUSING
RMW2
29
SMW1 WEDGE HOUSINGS Suface mount wedge housing. Wedge housing for larger camera and lens combinations. The SMW1 offers dual security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit. The enclosure has incorporated a multiposition camera mount bracket similar to the SMW5 with full access to one side of the camera. It is a general purpose wedge that suits a variety of mounting applications for larger camera and lens combinations.
APPLICATIONS
SPECIFICATIONS
Car parks, under eaves, railway platforms, tunnels, walls and walkways. An ideal general purpose enclosure for larger camera and lens combinations.
Finish White polyester powder coat.
Refer to housing Dimensions on page 45.
Lens 6.0mm polycarbonate. Access 2 x 6mm stainless steel security screw. Cable Entry 5 x 20mm entries, two at the rear, one in each side and one positioned at the top rear. Max. Camera Size 260mm. Weight SMW1- 2.9kg.
A WEDGE HOUSING
SMW1
30
PART NUMBER
DESCRIPTION
SMW1
Large surface mount wedge housing.
SMW2 WEDGE HOUSINGS Surface mounted wedge housing. Wedge housing for small to medium sized camera and lens combinations. The SMW2 offers a single security screw access and the option of surface run conduit to enter the enclosure directly without the conversion to flexible conduit. The key features of the SMW2 are the range of camera adjustments in an attractive low profile enclosure.
SPECIFICATIONS
OPTIONS
Construction 1.6mm zincanneal.
Omron tamper switch available as an option.
Finish Mossvale sands (light beige) polyester powder coat. Lens 6.0mm polycarbonate. Access 1 x 6mm stainless steel security screw. Max. Camera Size 170mm.
Refer to housing Dimensions on page 45.
APPLICATIONS Car parks, under eaves, railway platforms, tunnels and walkways. A general purpose enclosure for small to medium camera and lens combinations.
Weight SMW2- 2.05kg.
A
PART NUMBER
DESCRIPTION
SMW2
Compact surface mount wedge housing.
WEDGE HOUSING
SMW2
31
SMW3 WEDGE HOUSINGS Surface mounted wedge housing. Wedge housing for larger camera and lens combinations with optional wall mount bracket, tamper and vibration switch. The SMW3 offers a single security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit. The SMW3 has a range of camera adjustments. It is an attractive enclosure that suits a variety of mounting applications for larger camera and lens combinations.
OPTIONS
SPECIFICATIONS
Omron tamper switch and adjustable mercury vibration switch available as options.
Construction 1.6mm zincanneal.
Refer to housing Dimensions on page 45.
Finish Mossvale sands (light beige) polyester powder coat lid and black texture base.
APPLICATIONS
Lens 6.0mm polycarbonate.
Car parks, under eaves, railway platforms, tunnels, walls and walkways. An ideal general purpose enclosure for larger camera and lens combinations.
Access 1 x 6mm stainless steel security screw. Cable Entry 4 x 20mm entries, two at the rear, one in each side and one positioned at the top rear. Max. Camera Size 260mm. Weight SMW3- 4.3kg.
A WEDGE HOUSING
SMW3
32
PART NUMBER
DESCRIPTION
SMW3
Recessed mount wedge housing.
TSW SMW3
Tamper switch to suit SMW3 housings.
ERC6 RACK ENCLOSURES Bench mount steel enclosure for DVR and electronic switching equipment. The ERC6 range features front and rear rack rails for mounting heavier equipment such as UPS cases. The rear panel provides an optional 110mm fan mount and the advantage to remove the panel without disconnecting cables from the internal equipment. The new ERC6 design offers improved levels of security through recess mount front door and concealed hinges. Heat dissapation has been upgraded by the inclusion of additional ventilation in the cabinet base.
SPECIFICATIONS
OPTIONS
Dimensions ERC6-500- 552mm(W) x 505mm(D) x 340mm(H). ERC6-700- 552mm(W) x 705mm(D) x 340mm(H).
240VAC ventilation fan an optional extra.
Mounting Depth ERC6-500- Maximum equipment mounting depth of 445mm. ERC6-700- Maximum equipment mounting depth of 645mm.
Refer to housing Dimensions on page 46.
APPLICATIONS Secure mounting of DVR’s UPS and electronic switching equipment.
Finish Graphite ripple polyester powder coat.
PART NUMBER
DESCRIPTION
ERC6-500SD
6RU, 505mm deep steel rack enclosure with steel door.
ERC6-500AD
6RU, 505mm deep steel rack enclosure with steel framed acrylic door.
ERC6-700SD
6RU, 705mm deep steel rack enclosure with steel door.
ERC6-700AD
6RU, 505mm deep steel rack enclosure with steel framed acrylic door.
SR1FK
240VAC 110mm ventilation fan with plug and lead.
B
B
ERC6-700
ERC6-500
RACK ENCLOSURES
Standard Inclusions Rear fan mount panel, front and rear rack rails.
33
MOUNTS
34
Aluminium and stainless steel wall mount brackets for dome housings.
Various sized pole and corner mount adaptors.
Dropper Kits for Internal and External dome housings.
Wall mount brackets for the Environmental series housings.
Extended wall mount brackets for Internal and External dome housings.
Pole mounts and manual pan tilts for use with Environmental and Wedge series housings.
DROPPER KITS FPM3000COL
APM1500 & 3000
Roofmount mountplate plate Roof PartNo. No.RMP RMP Part
Roof Roof mount mount plate Part Part No. No. RMP RMP
OPTIONAL OPTIONAL Decorative Decorative cover cover Part Part No. No.DCOVERW DCOVERW
OPTIONAL OPTIONAL Decorative cover cover Decorative PartNo. No.DCOVERW DCOVERW Part
Upper pole pole 31.8mm Upper diameter. Part Part No. No. diameter. 3000mm: UP30 UP30 3000mm1500mm:UP15 1500mmUP15
3000mm 3000mm long long dropper dropper 28.6mm 28.6mm diameter diameter Part Part No. No. LP30 LP30
Lower Lower pole pole 28.6mm 28.6mm diameter. diameter. Part Part No. No. 3000mm3000mm: LP30 LP30 1500mm1500mm: LP15 LP15
FPM3000COL FPM3000COL fit fits directly directly to SP300 & & SP300D SP300Dinternal internal domes domes
Part No. No. ARM Part ARM Adaptorto to attach attch RMDH Adaptor RMDH series dome to above dropper seriesdomes to above kits (20mm nipple) dropper kits (20mm nipple)
RMDH
Part No. No. ASASS Part ASASS Adaptor to Adaptor toattach attach SA220 & SS220 SA220 & SS220 dome housings Dome Housings
SA220 & SS220
AMPM1500 & 3000 3000 fit APM31500 & directly directly to SP300 & & SP300D SP300Dinternal internal domes domes
Part No. No.AMON AMON Adaptor to monitor Adaptor toattach attach monitor mount frames above mount framestoto above dropper kits (3/8” bolt) dropper kits (3/8” bolt)
MONITOR MOUNT TRAYS
mountingadaptor adaptor NoNo mounting required SP300 fits fits required asasSP300 directly dropperkits. kits directly totodropper
SP300 & SP300D
35
MOUNTING GUIDES ENVIRONMENTAL HOUSINGS
36
MOUNTING GUIDES DOME HOUSINGS
37
ACCESSORIES Description
Part Number
Zinc plated, powder coated mild steel wall mount bracket. Standard in MVS*.
WM125
Powder coated stainless steel wall mount bracket. Standard in white.
WM125SS
Powder coated mild steel wall mount bracket. Standard in black.
SMWB3
Powder coated stainless steel wall mount bracket. Standard in black.
SSWB3
Compact wall mount bracket for SA220 & SS220. Stainless steel, standard in black.
SSWB
Aluminium powder coated wall mount bracket. Standard in black.
SAWB
Extended wall bracket for SA220 & SS220 housings. Powder coated stainless steel, standard in black.
SSEWB
Stainless steel pendant mount to suit SA220 & SS220 housings. Standard in black.
SSPENA
300mm ceiling mount fixed pendant dropper in 1.6mm tube and 3.0mm plate. Standard in black.
SMPM300
3000mm fixed dropper in 1.2mm tube and mounting base. Standard in white.
FPM300COL
Adjustable dropper 1500mm to 2700mm in 1.2mm & 1.6mm tube. Standard in white.
APM1500
Adjustable dropper 3000mm to 5500mm in 1.2mm & 1.6mm tube. Standard in white.
APM3000
3000mm fixed dropper extension. Standard in white.
FROD300D
Adaptor to attach RMDH frames to FPM & APM droppers. Standard in black.
ARM
Adaptor to attach monitor mounting frames to FPM & APM droppers. Standard in black.
AMON
250mm aluminium liner with viewing slot. Standard in black.
RM LINER
180mm aluminium liner with viewing slot. Standard in black.
RM180 LINER
300mm aluminium liner with viewing slot. Standard in black.
RM300 LINER
Stainless steel recessed mount adaptor for RMW2 and RMW5. Standard in MVS*.
RMA5
Fixed pole mount in 2.5mm zincanneal mild steel for SMW5. Standard in MVS*.
FPM5
38
ACCESSORIES Part Number
Description
ASASS
Stainless steel adaptor to attach SA220 & SS220 to FPM & APM droppers. Standard in white.
HDWMB2
Stainless steel wall mount bracket to suit ECO & LPAR400 housings only. Powder coated in MVS*.
HDWMB3
Extended wall mount bracket to suit LPAR housings and pan tilt drivers. Powder coated stainless steel, standard in MVS*.
MPT2
Manual pan tilt bracket manufactured from powder coated zinc anneal. Standard in white.
HDMPT2
Stainless steel manual pan tilt to suit LPAR housings with 101.6mm OCD 4 bolt mounts. Powder coated standard in MVS*.
PMA2
Pole mount adaptor in powder coated stainless steel (minimum pole size is 90mm diameter). Standard in MVS*.
CMA
Stainless steel corner mount adaptor. Standard in MVS*.
SMA
Surface mount adaptor in 1.6mm zinc plated mild steel. Standard in black.
HSWMB
Stainless steel high security cable through wall mount bracket suitable for ECO & LPAR series housings. Standard in MVS*.
HSMPT
High security cable through pan tilt bracket in stainless steel. Suitable for ECO & LPAR series housings. Standard in MVS*.
WMB
Wall mount bracket for ECO and environmental housings. Powder coated zincanneal construction. Standard in MVS*.
D COVER
Decorative cover in 1.2mm aluminium. Standard in white.
RMP
Roof mount plate in 1.6mm zincanneal mild steel. Standard in black.
WM3
Wall mount bracket to suit SMW3 housing in 1.6mm zinc anneal mild steel. Standard in MVS*.
LPWB2
Powder coated Zincanneal wall mount bracket. Standard in white.
HDWMB
Extended wall mount bracket for Environmental housings. Powder coated stainless steel standard in MVS*.
HDWMB3
Extended wall mount bracket for LPAR series housings. Powder coated stainless steel standard in MVS*.
PMPT5
Stainless steel pole mounted pan tilt for SMW5 range housings. Standard in white.
39
DIMENSIONS ENVIRONMENTAL HOUSINGS
40
ECO& ECOSS
LPAR400 & LPAR400SS
LPAR480
LPAR600
DIMENSIONS EXTERNAL DOME HOUSINGS RMDHWP & (RMDHWP300)
SA220 & SS220
LP235
LP300
41
DIMENSIONS INTERNAL DOME HOUSINGS
42
SP300 & SP300D
RMDH & (RMDH300)
CMDH
RM150 & (RM180)
DIMENSIONS CORRECTIONAL SERVICES HOUSINGS CMH01 & (CMH02 & CMH02SS)
CMH02WM
CMH02WP
CMH02WMWP
CMH03
CMSW01 250
242
278
43
DIMENSIONS WEDGE HOUSINGS
SMW5 & SMW5SS
SMW5PM & SMW5PMSS
SMW5PMPT & SMW5PMPTSS
RMW5 & RMW5SS
44
DIMENSIONS WEDGE HOUSINGS
SMW3
RMW2
SMW1
166
161
SMW2
345
45
DIMENSIONS RACK ENCLOSURES
ERC6-500 503mm
320mm
549mm
ERC6-700
320mm
549mm
46
703mm
MOUNT PLATES
Construction Mild steel, 2.0mm. Finish Mossvale sands (light beige) polyester powder coat. Compatible Housings Comes standard with ECO housing.
Construction 6.0mm plate & tube. Finish Zinc plated Mossvale sands (light beige) polyester powder coat. Compatible Housings SMW5PM, SMW5PMSS, SMW5PMPT & SMW5PMPTSS.
47
MOUNT PLATES
Construction Stainless steel, 3.0mm & 1.6mm. Finish Mossvale sands (light beige) polyester powder coat. Compatible Housings ECO & LPAR Series.
Construction Mild steel 1.6mm. Finish Black texture polyester powder coat. Compatible Housings LP300.
48
MOUNT PLATES
Construction Mild steel 1.2mm. Finish White polyester powder coat. Compatible Housings LP235.
Construction Stainless steel 1.6mm. Finish Black texture polyester powder coat. Compatible Housings SA220, SS220, PTZ, AXIS & RS550.
49
INDEX CMDH CMH01 CMH02 & CMH02SS CMH02WM CMH02WMWP CMH02WP CMH03 CMSW01 Correctional Services Housing Dimensions Dome Housing Mounting Guide Dropper Kits ECO & ECOSS Environmental Housing Dimensions Environmental Housing Mounting Guide ERC6 External Dome Housing Dimensions Internal Dome Housing Dimensions LPAR400 & LPAR400SS LPAR480 LPAR600 LP235 LP300 Mounting Plates Rack Enclosure Dimensions RMDH & RMDH300 RMDHWP & RMDHWP300 RM150 RM180 RMW2 RMW5 & RMW5SS SA220 SMW1 SMW2 SMW3 SMW5 & SMW5SS SMW5PM & SMW5PMSS SMW5PMPT & SMW5PMPTSS SS220 TH Series Wedge Housing Dimensions
50
16 19 19 20 22 21 23 24 43 37 35 4 40 36 33 41 42 5 6 7 9 10 47 46 13 8 14 15 29 28 11 30 31 32 25 26 27 12 18 44
51
