Transcript
INDEX .... ....... . ..... .... ... .... ...... . ..... .... .... .. .... 04 Energy.. .. ..... .... . .. . .. .... ..... .... .... .. .... . .... .. ...... 24 .. Mille... Hertz-Digital-Power.. .....10 Dieci.. .... .... .. ......... .... . ...... ... ....... .... ............ 32 .. Hi-Energy.. . .. .. .......... ..... .......... .... . . 14 SPL... . .. .. . ............ .... ...... .. .... ......... .... .... .. .... .. 36 .. Hertz-Energy.. ..... .... .... ........ ........ 20
1 TETOLON® DOME impedance, ensuring maximum power handling and Tetolon® Fiber dome features a hemispheric-hyperbolic frequency extension, even when listened to off axis. profile for maximum rigidity and linear frequency response beyond the audible range. 4 RENEWED CROSSOVER The highest quality components, the Rubber Touch 2 REN® NEODYMIUM MAGNET case, a passive cooling system and a three position In every component, the motor assembly is centred level control: these features make this crossover upon a REN® Neodymium ring, capable of operating in unique. high heat conditions. ML 280 tweeter is equipped with a double REN® Neodymium magnet. The use of a REN® 5 ALUMINIUM MAIN STRUCTURE Neodymium magnet generates extraordinary energy, The use of aluminium permits a perfect control, contrifor extremely high performance. buting to the reduction of unwanted resonances and residual vibrations. 3 ALUMINIUM VOICE COIL & COPPER RING The main structure and the rear acoustic chamber of The central pole piece is covered with a pure copper the tweeter are CNC machined from a solid aluminium sleeve. This combined with its CCAW double layer block. The basket is also made from anti-resonant voice coil wound on a Kapton® former provides a linear aluminium alloy.
MAXIMUM POWER, MAXIMUM QUALITY, MINIMUM SIZE Hertz Digital Power project delivers high power levels while maintaining high efficiency, in a compact footprint chassis size required in today’s modern installations. It has inherited all the technologies which made HP successful, with further advanced performance. More specifically, the D-Class technology has evolved into a Full Range design for offering stunning musical performance also with elevated power output.
10/11
www.hertzaudiovideo.com
1 MONITORING LEDs
4 LEDs monitor amplifier status and communicate with the user in real time. This system, while allowing the amplifier to operate, also identifies installation faults and leads to eliminate them. 3 OPTIMIZED HEATSINK
The heatsink boasts extremely efficient thermal conductivity, combined with exclusive cosmetics: scratch-resistant finish, end caps shaped for easy handling, control panel accessible from the top as well as a featured back lit Hertz logo which can also be rotated.
1
4
2
2 HDP ELECTRONICS
Power supply stage featuring toroidal transformers with multi-layered windings, powerful TO220 (for HDP 1) and T2205pin with dual inside device (for HDP 4 and HDP 5) Mosfets. 4 HDP IN & ARTTM
HDP IN system provides to interface with any OEM (through the Speaker In) and aftermarket (through the RCA In) sources. Using Speaker In inputs, the ARTTM (Automatic Remote Turn On-Off) function is available; the user can also switch it off.
3
HDP
HDP 1
MONO D-CLASS AMPLIFIER
12/13
1000 W
MAX POWER
HDP 4
FULL RANGE D-CLASS FOUR-CHANNEL AMPLIFIER
1000 W MAX POWER
AMP HDP 5
950 W
FULL RANGE D-CLASS FIVE-CHANNEL AMPLIFIER
MAX POWER
Technical specifications Channel Model Output Power (RMS) @ 14.4 VDC
S/N Ratio (A weighted)
RMS Output Power S/N Ratio
HDP 5
1
4-3-2
5-3
600 x 1
150 x 4 150 x 2 + 500 x 1 250 x 4 250 x 2 (2) + 500 x 1 (4)
70 x 4 + 380 x 1
@ 4Ω @ 4Ω @ 2Ω @ 2/4Ω @ 4/2Ω
/
Hz @ dB/Oct.
Bypass Hi-pass
Hz @ dB/Oct.
Lo-pass
40 ÷ 150 Hz @ 24
Hz @ dB/Oct.
Band-Pass
1000 x 1
Yes A: 50 ÷ 5k (2 range) @ 12 B: 80 ÷ 3.3k Hz @ 12 A: 50 ÷ 5k (2 range) @ 12 B: 80 ÷ 3.3k Hz @ 12
(Hi-pass) 18 ÷ 40 Hz @ 24 ok
100 x 4 + 550 x 1 200 x 2 + 550 x 1 A, B: Yes C: / A: 40 ÷ 150 Hz @ 12 B: 80 ÷ 3.3k Hz @ 12 C: 40 ÷ 150 Hz @ 24 A: 40 ÷ 150 Hz (HI) @ 12 80 ÷ 3.3k Hz (LO) @ 12
Hz @ dB/Oct.
Subsonic
(-50 ÷ 6) dB
Remote Sub Volume
%
100 Hz @ 4Ω
0.08
0.08
0.08
dBA
sensitivity @ 1 V RMS
103
100
A&B/C: 100/106
100 Hz @ 4Ω
100
50
A&B/C: 50/100
171 x 344 x 46.70 6.73” x 13.54” x 1.83”
171 x 284 x 46.70 6.73" x 11.18" x 1.83"
171 x 344 x 46.70 6.73” x 13.54” x 1.83”
600 x 1 83,5
120 x 4 80
60 x 4 + 310 x 1 60 W: 80 310 W: 84
Damping factor Size W x D x H
HDP 4
W x ch W x ch (Mono) W x ch W x ch W x ch
Filters
Distorsion - THD
HDP 1
mm inch
external
W x ch dBA
4Ω, ≤1% THD +N, 14.4 V Ref. 1 W Output
ok
1 DIE-CAST AND REFINED HEATSINK
Equipped with an optimized die-cast heatsink for enhanced thermal performance, HE amplifiers feature vertical fins besides the horizontal fins, used in the traditional extruded heatsink.
20/21
2
HE STATUS LOGO
This technology allows the user to visually monitor the status of the amplifier in real time. The logo lights up of a blue colour when the amplifier is working correctly, changing into an orange when it enters into protection status. 3
HE IN
To interface the HE line with both OEM (Speaker In) and aftermarket (RCA In). HE IN provides noise-free installation in any type of system design.
When HE IN is used, ART™, Automatic Remote TurnOn/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off. 4
HE ELECTRONICS
Underneath the heatsink, multiple winding transformers, high current 105° C Electrolytic capacitors and low RDS-ON mosfets are employed. HE 2 and HE 4 are equipped with SANKEN TO3P output transistors, while HE 1D features a Class D output stage based on solid TO247 power mosfets, also employed in the Synchro D-Class circuit.
HE 1D.1 MONO D-CLASS AMPLIFIER
22/23
900 W
MAX POWER
HE 2.1 STEREO AB-CLASS AMPLIFIER
400 W MAX POWER
HE 4.1
800 W
FOUR-CHANNEL AB-CLASS AMPLIFIER
MAX POWER
HE 1D.1
Technical specifications Channel Model Output Power (RMS) @ 14.4 VDC
Distorsion - THD S/N Ratio (A weighted)
Size W x D x H RMS Output Power S/N Ratio
1
2-1
4-3-2
70 x 2 200 x 1 100 x 2
70 x 4 200 x 2 100 x 4
15 ÷ 40Hz @ 24dB (mono) 0 ÷ 250Hz @ 24dB (mono) 0 ÷ +12dB @ 50Hz
Yes 40 ÷ 400Hz @12dB 40 ÷ 400Hz @12dB -
Yes A/B: 40 ÷ 400Hz @12dB A/B: 40 ÷ 400Hz @12dB -
0.04
0.06
104
104
150
150
266 x 289 x 63,5 10”1/2 x 11”3/8 x 2”1/2
266 x 289 x 63,5 10”1/2 x 11”3/8 x 2”1/2
267 x 393 x 63,5 10”9/16 x 15”1/2 x 2”1/2
150 x 1 60
55 x 2 82
55 x 4 82
@ 4Ω @ 4Ω @ 2Ω @ 1Ω @ 2/4Ω
Hz @ dB/Oct. Hz @ dB/Oct. Hz @ dB/Oct.
Bypass Hi-pass Lo-pass Subsonic
% %
1kHz @ 4Ω 100 Hz @ 4Ω
0.15
dBA
sensitivity @ 1 V RMS
100
Damping factor
1kHz @ 4Ω 100 Hz @ 4Ω mm inch
external
W x ch dBA
4Ω, ≤1% THD +N, 14.4 V Ref. 1 W Output
HE 4.1
200 x 1 320 x 1 450 x 1
W x ch W x ch (Mono) W x ch W x ch W x ch
Filters
HE 2.1
150
100 x 2 (2Ω) +200 x 1 (4Ω)
1 V-CONE® The exponential profile gets very close to a perfect one, providing exceptional dispersion. 2 ULTRA FLAT Small size and shallow depth for installations without limits. 3 REN® NEODYMIUM Small and powerful motor structure with copper-covered pole, for maximum linearity and energy.
24/25
4 RHFC® TECHNOLOGY Provides the ability of orienting tweeter direction according to the listening point, for the benefit of the high frequencies. 5 NON-PRESSED PAPER CONE on the EV 165L, for the best energy trasfer at low end and mid frequencies.
26/27
28/29
ES F20.5 SUBWOOFER
400 W
ES F25.5 SUBWOOFER
500 W
ES F20.5
200 (8”)
400
200
4
32 ÷ 400
93
38 (1” 1/2)
ES F25.5
250 (10”)
500
250
4
30 ÷ 300
92
60 (2” 3/8)
30/31
High Density flux ferrite
12 (1/2”) 13 (1/2”)
EBX F20.5 REFLEX SUB BOX
EBX F25.5 REFLEX SUB BOX
400 W
600 W
ES F20.5 ES F25.5 EBX F20.5 EBX F25.5
Box Size
EBX F20.5
200 (8”)
250 (10")
400
200
4
40 - 400
90
520 x 108 x 320 20”1/2 x 4”1/4 x 12”5/8
EBX F25.5
250 (10”)
300 (12”)
600
300
4
38 - 350
92
670 x 119 x 403 26”3/8 x 4”11/16 x 15”7/8
EBX 200
200 (8”)
-
500
250
4
30 - 400
91
390 x 297 x 288 High density 15”3/8 x 11”11/16 x 11”5/16 flux ferrite
EBX 250
250 (10”)
-
700
350
4
28 - 300
93
465 x 340 x 338 18”5/16 x 13”1/16 x 13”5/16
EBX 300
300 (12”)
-
1000
500
4
25 - 250
94
545 x 331 x 400 21”7/16 x 13”1/16 x 15”3/4
Waterrepellent pressed paper
32/33
34/35
Box Size
36/37
38/39
%, 100 Hz @ 4Ω
external
40/41
42/43
90131106
