Transcript
CONTENTS
3 3
WELLER
®
Soldering stations Stands & accessories Repair & rework stations Soldering tips Fume extraction
WELLER 24-7 28-13 14-16 17-26 27-32
33 33
EREM
®
High precision tweezers Cutters Pliers Pre forming tools Fibre optic tools
XCELITE
Knives Blades Allen sets PC repair tools and kits
For Xcelite® refer to current Apex Tool Group Hand Tools Price List for listing of products available
EREM 34-35 36-37 38 38 38
®
TERMS & CONDITIONS OF SALE
The prices shown are recommended and exclusive of G.S.T. Net prices can be derived by applying your appropriate discount, unless otherwise authorised by Apex Tool Group Pty. Limited, Albury NSW and are subject to change without notice. All orders are subject to acceptance by the factory in Albury. Orders are accepted only on the basis of prices ruling on the date of shipment, unless otherwise agreed.
Product Returns
Credit Claim
Postal or freight charges via our specified carrier both to the factory and on return will be for the account of Apex Tool Group.
Claims for shortages, breakages, etc., must be made within 14 days on receipt of goods. All orders will be shipped CPT Carriage Paid to destination, or as negotiated.
Small Order Charge For orders of less than $100.00 excluding GST an order processing charge of $10.00 + GST will apply. Back orders and spare parts are exempt from this condition.
Finish We reserve the right to furnish, without notice, whatever finish is available regardless of catalogue descriptions.
Trading Terms Payment received within 30 days of the last day of the month in which the invoice was raised. Cash Discounts 2% for Payment by cheque or E.F.T. (exluding credit card) received within 10 days of the last day of the month in which the invoice was raised.
Minimum Annual Spend To maintain an account with Apex Tool Group Pty. Limited, a minimum annual spend of $5,000 excluding GST, is required each year. Should sales fall below this amount in any one calendar year, you will be given the opportunity to discuss your situation with Apex Tool Group and to increase your sales over the following 6 month period. Should this not occur, your account will be closed at Apex’s discretion.
Rebates All rebates are dependent on the recipients account being conducted as per our Terms and Conditions.
Freight Chargeable freight to the customer will be prepaid and charged on our invoice.
2
All returns of Apex Tool Group products should be to the factory, via our specified carrier. Apex Tool Group Pty. Limited 519 Nurigong Street Albury NSW 2640
Goods Returned Under Warranty
Goods Returned for Repair Postal or freight charges to the factory will be for customers account and return charges will be for account of Apex Tool Group.
Goods Returned for Credit Any Apex Tool Group product may only be returned with written permission of Apex Tool Group Albury. All products must be new, of current design and in a resaleable condition. Credit will then be issued at the original purchase price, less a 15% handling service fee. Apex Tool Group Pty. Limited A.B.N. 50 002 965 826 PO Box 366, 519 Nurigong Street Albury NSW 2640 Australia (02) 6058 0300, 6021 5511, Fax 6021 7403 Sales (02) 6021 6666
Stock Adjustment Policy All requests to return merchandise must be approved by Apex Tool Group. An offsetting order of equivalent value must accompany the request for stock adjustment. An offsetting order must be for standard price listed items at current prices and standard terms (no promotions, specials, dating orders, contract items or merchandisers). Proof of purchase must be established on all items. Apex Tool Group will not accept the return of a product as part of a stock adjustment return which was not originally purchased from Apex Tool Group. The price shown on the Request for Return must coincide with the price list in effect at the time of original supply. The inclusion of a copy of the original Apex Tool Group invoice on which the item was shipped, will expedite the processing of the adjustment. Inventory adjustments will be credited at the actual cost paid by the distributor as determined by proof of purchase, going back one year. A 15% handling service fee will be assessed.
After authorisation is received, all returns must be shipped to the Albury factory, freight prepaid. All returned products must have been purchased within the last 6 months prior to return and be of current design and finish, in current production, and must be in a re-saleable condition upon receipt at the Albury factory. Any returned products which are not in a re-saleable condition will not be accepted and the distributor will be notified for disposition. Returns will not be allowed for special made to order items. Individually packed items must be in the original factory-sealed package when returned.
Limited Lifetime Guarantee Apex Tool Group quality products are guaranteed against any defect in material or workmanship. Damage caused by abuse, improper use or excessive wear is not covered by this warranty. This Warranty is provided in addition to other rights and remedies you have under law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Claims should be returned, with proof of purchase, to the place of purchase or returned prepaid to the address below. Repaired or replacement goods will be returned at our cost. Apex Tool Group Pty Limited 519 Nurigong Street, Albury NSW 2640, Australia Ph: (02) 60580300
[email protected] www.apextoolgroup.com.au
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Weller
Magnastat Controlled Station The Weller Magnastat system operates through a ferro-magnetic sensing device which changes its characteristics when a specific temperature is reached. This causes it to either attract or repel a permanent magnet which operates a power supply switch. In this way power to the heating element can be quickly switched on or off to either provide extra power for soldering operations or reduced power when idling. Working temperature selection is achieved by simply changing the ‘temperature sensing’ soldering tip. These are available in temperature ratings of 315°C, 371°C and 427°C. The tips are made of pure copper for effective heat conductivity. The heating element has an optimal heating effect on the tip. This is possible through high precision of the tubes, the winding and insulation, which means that the heating element should never be gripped with pliers or be hammered in any way. It is quite sufficient to secure the soldering tip by tightening it into the tip sleeve by hand (when the iron is cold). Temperature sensing Device
Tip
Permanent Magnet
Description
Power Switch
Power Supply
Material No.
Shelf Pack
WTCPTD
1
WD1000AU A new concept in soldering iron design. • Digital temperature control • Temperature lockout • Automatic shut off • Unique miniature pencil • 3 Pre-set temperature buttons • °C-°F switchable • Temperature range 50°C-450°C • Max. power output 80W • Made in Germany Soldering station consists of: • WD1 230V Power Unit • WP80 80 Watt 24V Pencil • WDH10 Holder • LTB tip • ROHS & WEEE Compliant
WD1000AU
1
WD1000TAU Soldering Station with Stop Go Stand
WD1000TAU
1
WD1000MAU Micro Digital Rework Soldering Station, • Designed for fine pitch, high density SMT soldering and rework • 3 “radio buttons” allows pre-set of frequently used temp settings • Setback, lockout, temp. window, F/C switching, standby, auto-off time • Large high contrast LCD display displays more information at a glance • The heating element is contained in the tip for fast heat-up • WMRP Pencil is made of aluminum with chrome plating and weighs just 75g • The pencil powers down when placed in the holder to extend tip life • The “tip to grip” distance is 45mm, placing you close to the work • The antistatic design of the safety rest has got four different settings • ESD safe to protect sensitive components • ROHS & WEEE Compliant • Max. Power Output 80W; Consists of WMRP 40W Micro Soldering Pencils with RT3 Tip and WDH50 Holder
WD1000MAU
1
WTCPTD Soldering station consists of: • TC202DT2 230V Power Unit • TC201B 42 Watt 24V Pencil • PH1201 Stand • 1.6mm 700°F/371°C tip Soldering Tips: PT-Series see page 16 Refer Hand Tools Price List
Electronically Controlled Stations
PRODUCT
4
ESD SAFE
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Electronically Controlled Stations (cont’d) Description
Shelf Pack
WD1000HPT The WD 1000HPT station features Weller’s new 120 W soldering iron, the WP 120. This iron is ideal for soldering on difficult circuit boards with heat sinks that cause dissipation in heat transfer. Target applications include high density circuit boards, High Frequency / Radio Frequency applications, and solar panel production. The Weller WD1000HPT station is specifically designed for soldering operations which need a combination of high energy and maximum precision. The WD1000 HPT consists of• The WD120 Soldering Iron XT Series Tips, refer page 29 • The WD1M Power Unit • WDH10T Stop + Go Iron Safety Rest • Dimensions (L x W x H mm): 134 x 108 x 147 • Mains voltage supply: 230V / 120V / 50/60 Hz • Power: 160W • Safety class: I (power unit), III (soldering iron) • Temperature control: 50°C - 450°C • Temperature accuracy: ± 9°C • Temperature stability: ± 5°C • Soldering tip leakage resistance: < 2 Ω (tip-to-ground) • Soldering tip leakage current: < 2 mV (tip-to-ground)
WD1000HPTAU
1
WD2000MAU Dual Micro Digital Rework Station • Use WMRP solder pencil and WMRT desoldering tweezers simultaneously • Designed for fine pitch, high density SMT soldering and rework • 3 “radio buttons” allows pre-set of frequently used temp settings • Setback, lockout, temp. window, F/C switching, standby, auto-off time • Large high contrast LCD display displays more information at a glance • The “tip to grip” distance of the WMRP pencil is just 45mm • WMRT tweezers utilize a tip cartridge that is always in alignment • Tweezers are automatically switched off when placed in the WMRTH holder • ESD safe to protect sensitive components • ROHS & WEEE Compliant • Max. Power Output 160W; RoHS & WEEE Compliant; Consists of WMRP 40W Micro Soldering Pencil with RT3 Tip and WDH50 Holder, WMRT 80W Micro Desoldering Tweezers with RTW2 Tip and WMRTH Holder
WD2000MAU
WSD151 Extremely high output soldering station delivering 150 watts • Digital microprocessor temperature control with LED display • Automatic shut off • Calibration box (WCB1 or WCB2) may be connected • °C-°F switchable • Temperature range 50°C-550°C • Max. power output 150W • ROHS & WEEE Compliant • Made in Germany Soldering station consists of • PUD151 230V Power Unit • WSP150 150 Watt 24V Pencil • KH27 Holder • LHT-F tip
T0053277599
WX1 Power Unit • 200 Watt rated output • Robust Touch screen display • Automatic energy saving mode • Multi purpose USB port • Benchtop Controller capability
WX1010 Soldering Station • WX1 Power Unit • WXP120 soldering tool (120 watt) with XTB tip • WDH10 safety rest with dry tip cleaner
ESD SAFE
1
ESD SAFE
1
ESD SAFE
WX1AU
1
ESD SAFE
WX1010AU
1
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 5
Weller
REINSTATED
Material No.
Weller
Electronically Controlled Stations (cont’d) Description
Material No.
Shelf Pack
WX1011 Soldering Station • WX1 Power Unit • WXMP micro soldering tool (40 watt) with RT3 tip • WDH50 safety rest with dry tip cleaner
WX1011AU
1
ESD SAFE
WX1012 Soldering Station • WX1 Power Unit • WXP65 soldering tool (65 watt) with XNT A tip • WDH10 safety rest with dry tip cleaner
WX1012AU
1
ESD SAFE
WX2 Power Unit Dual Output • 240 Watt rated output • Robust Touch screen display • Automatic energy saving mode • Multi purpose USB port • Benchtop Controller capability
WX2010 Soldering Station • WX2 Power Unit • 2 x WXP120 soldering tool (120 watt) with XTB tips • 2 x WDH10 safety rest with dry tip cleaner
WX2AU
1
ESD SAFE
WX2020AU
1
ESD SAFE
View video & brochure on WX Product Range at Website www.weller.de
6
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Electronically Controlled Stations (cont’d)
PRODUCT
Material No.
Shelf Pack
WX2021 Soldering Station • WX2 Power Unit • WXMP micro soldering tool (40 watt) with RT3 tip • WDH50 safety rest with dry tip cleaner • WXMT micro soldering tweezers (2 x 40 watt) with RTW2 tip • WDH60 safety rest with dry tip cleaner
WX2021AU
1
WXD2 Control Unit • 230V Power Unit • Power consumption 200 Watt • Channels 2 • Interface • ESD safe • Backlighting graphic display • Connectable tools: all WX tools are connectable The digitally controlled 2-channel soldering and desoldering station WXD2 was designed for professional repair work on state-of-the-art electronic assemblies in the industrial manufacturing, repair and laboratory sectors.
WXD2010 Soldering Station • WXD2 Power Unit • WXDP120 desoldering iron • WDH70 safety rest
ESD SAFE
WXD2AU
1
ESD SAFE
WXD2010AU
1
ESD SAFE
PRODUCT
WXD2020 Soldering Station • WXD2 Power Unit • WXDP120 desoldering iron with WDH70 safety rest • WXP120 soldering iron with WDH10 safety rest
WXD2020AU
1
ESD SAFE
View video & brochure on WX Product Range at Website www.weller.de
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 7
Weller
PRODUCT
Description
Tool Selection Chart WP120
WST82
WST20
WSB150
WSB80
WHPS80
WVP
HAP200
HAP1
DSX80
DS80UNC
WTA50
WMRT
WMRP
WSP150
WMP
WP80
WSP80
PES51
PRS50
TC201B
Station
TC201
Weller
Tools
WTCPT t WTCPTD t WES50D t WES51D t WESD51D t t t t t t t t WSD81 t WSL t t t t t t t t WSD151 t t t t t t t t t t WSD161 t t t t t t t t t t WMRS t t t t t t t t t t WD1000AU t t t t t t t t WD1001AU t t t t t t t t WD2000AU t t t t t t t t t WD2001AU t t t t t t t t t WD2002AU t t t t t t t t t t WD1000MAU t t t t t t t t t t t WD2000MAU t t t t t t t t t t t WD1AU t t t t t t t t t WD2AU t t t t t t t t t t t WD1MAU t t t t t t t t t t t WD2MAU t t t t t t t t t t t t t WD3MAU t WMD1 t t t t t t t t t t t t WMD1A t t t t t t t t t t t t WMD1D t t t t t t t t t t t t WMD3 t t t t t t t t t t t t t t WMD3K2 t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t WR3M t WR3000M t t t t t t t t t t t t t t t t t t
Optional Accessories
PRODUCT
8
Description
Material No.
Shelf Pack
DSX80 Iron 80 Watt Desoldering Pencil • Temperature range 50°C-450°C • RPHS & WEEE Compliant See page 24 for DX tips
T0051319099
1
DSX80 SET Consists of: • DSX80 Desoldering Tool • WDH30 Stand
T0051318399
1
DSX120 Desoldering Iron Temperature range 50°C - 450°C Power cosumption 120W Heat-up time 35 sec. (50-380°C) Tip type XDS Series Connectable to WR2 and WR3M
T0051319899
1
WTA-50 SET The WTA-50 tweezers can be used with all Weller Temtronic/SL series stations. Dual heating elements with independent temperature sensors provide the tips with constant temperature. Temperature range 150°C - 450°C Output 2 x 25W Consists of: • Desolder Tweezer • AK51 Support • Hex Key Supplied with WT1 tip See page 21 for WT tips • ROHS & WEEE Compliant
T0053313399
1
HAP1 SET 100 Watt HAP1 Hot Air Pencil & WDH30 Stand. For both soldering and desoldering of SMD’s. Temperature range 50°C - 550°C Power absorption 100W Consists of: • HAP1 hot air pencil • WDH30 Safety Rest • 1.2mm nozzle • Xcelite Nutdriver P8 MM See page 25 for nozzles • ROHS & WEEE Compliant
T0052711899
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Optional Accessories (cont’d) Material No.
Shelf Pack
HAP200 SET Hot Air Pencil set 200W, 24V The HAP200 provides a directional hot air flow that is adjustable. Electronic temperature control from 50°C to 550°C. Different nozzles available as accessory. Finger switch controls the adjustable pump. For WR 3M only.
T0052711799
1
T0058761728
1
WP65 65 Watt Soldering Iron • Heating voltage 24 V • Heating output 65 W • Heat-up time approx. 7s 50°C to 380°C • Temperature range 100°C - 450°C • Tip type XNT Series • Compatible with all stations from 80W (except WX) • Fast response heating technology • Beneficial soldering tip prices • Max. heating transfer • Soldering tip in optimized sensor position • Fast reaction time
T0052921599
1
WP65 Soldering Set • With WDH10 Stand
T0052921699
1
T0052918099
1
T0052918199
1
T0058744845
1
T0052919399
1
HAP200 Nozzle Adapter See page 25 for Nozzles
PRODUCT
PRODUCT
www.weller.eu
April 29, 2008
NEW: WD 1000HPT The New Generation of High Power Tools
Weller Info No. 15 NEW: WD 1000HPT
www.weller.eu
®
The New Generation of High Power Tools
WP80 80 Watt Soldering Pencil with Short Tip-To-Grip • Compatible with WD1 and WD2 Soldering Stations, and WRS Rework Stations • New WP80 offers 80 watts of power with short tip-to-grip (40 mm) • New WP80 has same performance characteristics as the WSP80 • Perfect for Lead Free solder • ESD safe to protect sensitive components • ROHS & WEEE Compliant • See page 18 for LT tips, Accessories and Spares • Spare element NOT available (sealed to handle) April 29, 2008
WP80 Set • Consists of: • WP80 soldering pencil • WDH10 support The WD 1000HPT station features Weller®'s new 120 W High • ROHS & WEEE Compliant See page 18 for LT Tips iron. This iron is ideal for Power Tool, our•new WP 120 soldering
soldering on challenging circuit boards with heat sinks and big soldering joints WP80 that cause dissipation in heat transfer. Barrel large for WP80 Pencil The Weller® WD 1000HPT station is specifically designed for your soldering operations which need a combination of high energy and maximum precision. WP120 Soldering Iron • Twice as much power and efficiency
The WD 1000HPTincomprises a small and -ergonomic pencil design Iron The WP 120 Soldering Powerful heating a as much power and The new WP 120• High Power Toolelement offers with twice replaceable soldering tip efficiency in a small and ergonomic pencil design. Combining a • Best life cycle cost at dynamic compact, powerfulperformance heating element with a replaceable soldering tip • The rapid transfer of heatcost into the the WP 120 guarantees best life cycle at dynamic performance. soldering tip®is and The WD 1000HPT station features Weller 's quickly new 120 W precisely High The rapid transfer of heat into the soldering tip isfor quickly and precisely controlled with electronics Power Tool, our new WP 120 soldering iron.sophisticated This iron is ideal • Design copes with bigsinks andwhich difficult withcircuit sophisticated electronics allows the WP 120's soldering controlled on challenging boards with heat and big joints evenand at barely tosolder cope withjoints big difficult solder joints even at soldering compact joints thatdesign cause large dissipation in heat transfer. accessible ® accessible Also for plates HF shield plates or solar WD 1000HPT station specifically designed for your The Wellerbarely • joints. Alsoisideal for ideal HF shield or solar panela manufacturing soldering panel operations which need combination of high energy manufacturing.
Weller® Info No. 15
and maximum precision. T0052919499 1 WP120 The WD 1M Power UnitSet The WD 1000HPT comprises • Consists of: Our well established microprocessor controlled WD 1M has a number The WP 120 Soldering Iron • WP120 soldering pencil of 120 in built functions as preset temperatures, individual settings The new WP Highspecial Power •Tool offers Stop twice WDH10T +as Gomuch Standpower and setback, connectivity, which make it ideally suited for use in efficiency infor a small and USB ergonomic pencil design. Combining a • ROHS & WEEE Compliant compact, powerful heating element with a 17 replaceable production, rework and laboratory environments. • See page for XT tipssoldering tip the WP 120From guarantees best cycle dynamic performance. now on welife equip allcost WDat1Ms' additionally with new advanced WDH10T The rapid transfer of heat into the solderingfor tip this is quickly software specially designed new and WPprecisely 120 High Power Tool. controlled with sophisticated electronics which allows the WP 120's compact design to cope with big and difficult solder joints even at barely accessible joints. Also ideal for HF shield plates or solar The WDH 10T Stop + Go Iron Safety Rest panel manufacturing. Special tipdepictions life saving functions automatically activated when you Note: Some of the above items may require a freight lead time. Product are not to scale. are Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 9
place the soldering iron into the WDH 10T safety rest. This is an easy
Weller
Description
Weller
Optional Accessories (cont’d) Description
Material No.
Shelf Pack
WMRP Soldering pencil for RT soldering tips • ROHS & WEEE Compliant • 40 watt Micro Soldering Pencil Set with high speed regulation See page 20 for RT tips
T0052917199
1
WMRP SET Consists of: • WMRP 40 W Pencil • WDH50 Stand
T0052919099
1
WMRT Micro Desoldering Tweezers with rest for WMRS, WD 1M, WD 2M The new WMRT desoldering tweezers enables with its twin parallel adjusted tiplets a significant precise de- and soldering of very small SMD components. The high speed regulation of the stations WMRS, WD 1M, WD 2M drives this tweezers. Placed in the rest WMRTH the tips are automatically switched off for increasing endurance. • ROHS & WEEE Compliant
T0051317399
1
WSP150 150 watt soldering pencil for heavy duty work • ROHS & WEEE Compliant See page 20 for LHT tips
T0052917099
1
WSP150 SET Consists of: • WSP150 Soldering Tool • WDH30 Stand
T0052918999
1
PES50 50 watt soldering iron to suit WES50D PH50 Stand not included
PES50
1
PES51 50 watt soldering iron to suit WES51D and WESD51D See page 17 for ET tips PH50 Stand not included
PES51
1
EC1201AP
1
WXDP120 Desoldering Iron • Temperature range 50°C - 450°C • Power consumption 120 W • Heat-up time 35 sec. (50°C - 350°C) • Desoldering tips XDS Series • Control units Weller EX Station
T0051320199
1
WXDP120 Desoldering Set Consists of: • WXDP120 Desoldering Tool • WDH70 Stand
T0051320299
1
WXP65 Soldering Iron 65W 1.6M • 24 volt, 65 Watt soldering tool with XNTA tip • Very fast response for precision soldering
T0052921199
1
WXP65 Soldering Set • 24 volt, 65 Watt soldering tool with XNTA tip • Very fast response for precision soldering • WDH10 safety rest with dry tip clearner
T0052921299
1
Refer Hand Tools Price List EC1201AP 40 watt soldering pencil with stand See page 17 for ET tips Refer Hand Tools Price List
PRODUCT
PRODUCT
PRODUCT
10
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Optional Accessories (cont’d) Material No.
Shelf Pack
WXP120 Soldering Set • 24 volt, 120 Watt soldering tool with XTB tip • For soldering large components with high heat demands • WDH10 safety rest with dry tip cleaner
T0052920299
1
WXP200 Soldering Set • 24 volt, 200 Watt soldering tool with XHTD tip • For soldering very large components or ground planes • WDH31 safety rest with dry tip cleaner
T0052920699
1
WXMP Soldering Set • 24 volt, 40 Watt micro soldering tool with RT3 tip • Extremely rapid response, ideal for working under a microscope • WDH50 safety rest with drip tip cleaner
T0052920499
1
WXMT Tweezer Set • 24 volt, 2 x 40 Watt micro soldering tweezer with RTW2 tip • Extremely rapid response, ideal for desoldering small SMD parts • WDH60 safety rest with dry tip cleaner
T0051317899
1
WHP200 Infrared Under Board Heater The new WHP200 from Weller is a new under board heater which although small in dimensions is very powerful. The WHP200 is designed to be used on small multipayer PCBs to minimise the risk of thermal damage to boards and to speed up the repair process. • Universal application The WHP200 is suitable for use with a range of consumer electronic boards. It is perfect for rework operations on digital camera, mobile phones, MP3 players and PDA pcbs • Fast and efficient heating The infrared plate provides fast, precisely controlled heating to create an even substrate temperature • Operating simplicity The WHP200 is simple to use with very easy adjustment for the heating temperature. The heating plate comes complete with a pcb board holder so there is no need to buy additional accessories • Excellent Price-/Performance ratio The WHP under board heater provides an excellent Price-/Performance balance • Dimensions (L x W x H): 193 x 193 x 84 mm inc. pcb holder 7,6 x 7,6 x 3,3 inch • Dimensions Heating Zone (L x W): 120 / 60 mm; 4,72 / 2,36 inch • Voltage: 230 V / 50/60 Hz • Power: Heat Zone 200 W Medium Wave Infrared • Safety Class: I • Regulation: 50°C - 400°C
T0053371599
1
WRK Rework Nozzle Kit The newly developed, innovative desoldering system facilitates soldering and desoldering of large SMT components up to 30 x 30 mm. The desoldering system can be connected to the additional vacuum channel (pick up) of the WR 3M. • 8 Nozzles • Assorted Vacuum Cups • 2 Vacuum Rods and Hose • Stand
T0051515599
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 11
Weller
Description
ACCESSORIES Soldering pencils, Magnastat temperature controlled, low voltage
Weller
Description
Material No.
Shelf Pack
TC201B TCP50M TC201
1 1 1
W60D W100D T0056107599
1 1 1
PH1201 Tool Stand for TCP, TC, EC and SP *For pricing refer to Hand Tools Price List
PH1201
1
PH50 Tool Stand for PES50 and PES51 *For pricing refer to Hand Tools Price List
PH50
1
PH1260 W60D Tool Stand *For pricing refer to Hand Tools Price List
PH1260
1
PH12100 W100D Tool Stand *For pricing refer to Hand Tools Price List
PH12100
1
WDH10 Support for WSP80 & WP80 with four different settings
T0051512199
1
WDH10T WP80 Stop-And-Go Stand
T0051516199
1
WDH30T Stop-And-Go Support
T0051516399
1
*TC201B Magnastat Tool suits WTCPTD 42W 24V *TCP50M Magnastat Tool 40W 50V *TC201 Magnastat Tool suits WTCPS/T 40W 25V *For pricing refer to Hand Tools Price List
Soldering pencils, temperature controlled, line voltage *W60D Magnastat Tool *W100D Magnastat Tool *W201D Magnastat Tool
60W 100W 200W
See pages 24 & 25 for Tips *For pricing refer to Hand Tools Price List
W100D
Tool Stands
PH50, PH12100
PH1201, PH1260
WDH10
WDH10T
WDH30T PRODUCT
Tool Stands Chart
TCP TC201/B EC1201 PES50 PES51 WSP80 WSP150 WP80 WP120 WMP WMRP WTA-50 HAP1 HAP200 DS80UNC DSX80 W60D W100D 12
AK51
PH12100
PH1260
WDH10T
WDH50
WDH30
WDH20
WDH10
PH50
Tools
PH1201
STANDS
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Soldering Aids Material No.
Shelf Pack
ESF-120ESD Printed circuit board holder • Adjustable to Eurocard size • Suitable for holding irregular shaped cards • Component support
T0051502699
1
Sponge 2 Layers - Pack of 5 70X55X16MM
T0052242099
1
WPB1
1
WDC2 Dry Cleaner Attachment
T0051512599
1
WDC Wire Wool 2 Refills
T0051382499
1
T0053124699
1
WPA2
1
WSTA3 Soldering, hot blow and torch flame facilities.kit includes: • 1 x soldering tip • 1 x hot blow tip • torch ejector tightening bar • Metal Kit box See page 32 for tip selection *For pricing refer to Hand Tools Price List
WSTA3
1
WSTA6 Junior pocket size with auto ignition • Fitted with pocket clip • Suitable for soldering and hot blow applications • 1 x WPT-01 tip See page 31 for tip selection *For pricing refer to Hand Tools Price List
WSTA6
1
WSTA5 Jumbo, (self igniting) Kit includes: • Soldering Tip 72-01-02 • Hot Blow Tip 72-01-52 • Metal kit box See page 31 for tip selection *For pricing refer to Hand Tools Price List
WSTA5
1
WPB1 Polishing Bar • Rejuvenates tips without damage to the plated surface
WDC
WDC2
Electronic Temperature Measuring Equipment WTT1 Temperature measurement and calibration. • Measures temperature without imposing thermal load. The WTT1 digital temperature measuring system has been specifically designed for measuring the temperature of soldering iron tips. The probe has a double sensor system and internal heat source. The measured temperature is fed to a control system that records the flow of heat in the probe and stabilizes it with the aid of the internal heat source. This design ensures that no heat is drawn by the probe from the object being measured. Erroneous measurements due to the large thermal load of the probe are thus prevented. The measured temperature is indicated on a three-digit LED display to a resolution of 1°C. An adjustable preheat temperature ensures a rapid response even at high temperatures.
Weller® Pyropen WPA2 Piezo ignition (self) lighting. Kit includes: • 1 x WPT-2 soldering tip • 1 x WHC-52 hot blow tip • Metal kit box See page 32 for tip selection *For pricing refer to Hand Tools Price List
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 13
Weller
PRODUCT
Description
Repair/Rework Stations
Weller
Description WR2 Rework Station • 300 Watt rated output • Two channel simultaneous operation • Internal air and vacuum supply • Will drive regular Weller tools up to 200 watts • Will not drive micro tools or XT tools • DH10 safety rest with dry tip cleaner
Material No.
Shelf Pack
WR2AU
1
ESD SAFE
View brochure & video at website: www.weller.de
WR2000A Hot Air Station • WR2 Rework station • HAP1 Hot air tool with 3.0mm nozzle • WDH30 Safety rest with dry tip cleaner
WR2000AAU
1
ESD SAFE
WR2000D Desoldering Station • WR2 Rework station • DSX80 Desoldering tool with DSX113HM tip • WDH30 Safety rest with dry tip cleaner
WR2000DAU
1
ESD SAFE
WR2002 Rework Station • WR2 Rework station • WP80 Soldering tool with LTB tip • WDH10 Safety rest with dry tip cleaner • DSX80 Desoldering tool with DSX113HM tip • WDH30 Safety rest with dry tip cleaner
14
WR2002AU
1
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Repair/Rework Stations Material No.
Shelf Pack
WR3M Package includes: • WR 3M repair station • Adapter for HAP200 hot-air pencil • CD with USB software • USB cable Technical data: • Dimensions L x W x H (mm): 237 x 235 x 102 • Weight: approx. 6.7 kg • Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz) • Power consumption: 420 W • Safety class: I and III, housing antistatic • Fuse: Overcurrent release 2 A (4 A) • Temperature control Soldering and Desoldering iron stepless of channels: 50°C-550°C • Controllable temperature range is tool-dependent • Temperature accuracy: ± 9°C • Temperature stability: ± 2°C • Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar • Max. delivery rate 18 l/min • Hot air max. 15 l/min • Additional Pump: Max. vacuum 0.5 bar • Max. delivery rate 1.7 l/min • Equipotential bonding: Via 3.5 mm pawl socket on back of device
T0053366699
1
WR3000MAU Rework Set Package includes: • WR3M • HAP200 Hot-air pencil with WDH30 Safety rest • DSX80 Desoldering iron with WDH30 Safety rest • WP80 Soldering iron with WDH10 Stop + go Safety rest • WVP Vacuum pick up • WDC2 Dry cleaner Technical data: • Dimensions: L x W x H (mm): 237 x 235 x 102 • Weight: approx. 6.7 kg • Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz) • Power consumption: 420 W • Safety class: I and III, housing antistatic • Fuse: Overcurrent release 2 A (4 A) • Temperature control Soldering and Desoldering iron stepless of channels: 50°C-550°C • Controllable temperature range is tool-dependent • Temperature accuracy: ± 9°C • Temperature stability: ± 2°C • Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar • Max. delivery rate 18 l/min • Hot air max. 15 l/min • Additional Pump: Max. vacuum 0.5 bar • Max. delivery rate 1.7 l/min • Equipotential bonding: Via 3.5 mm pawl socket on back of device
WR3000MAU
WHA900 Hot air station 700W with built-in turbine Low cost hot air station for less complex repair tasks and hot air applications suck as shrinking. The in-built turbine provides hot air and variable temperatures. The temperature of the hot air is electronically controlled. • Analogue temperature adjustment • Temperature range 50°C-550°C • Air Volume 5-50 l/min (ESD Safe) • Two rotary potentiometers to set air temperature and air volume • Standby and calibration function • Safety Class I • ROHS & WEEE Compliant
T0053171699
ESD SAFE
1
ESD SAFE
Hot Air Station 1
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 15
Weller
View video & brochure at website: www.weller.de
Description
Weller
Repair/Rework BGA/QFP Stations The new WQB Repair System upgrades the Weller product range in the SMD repair tool sector. A well thought-out design concept combines reliability and maximum process control with ease of use and technically mature detail solutions. Useful accessories increase the possible uses of this repair work station. On the WQB 3000 the temperature-regulated 2-zone infrared bottom heater provides rapid warm up and homogeneous substrate temperatures. The hot gas top heater, with digital control electronics for temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to the components. A temperature sensor placed directly in the hot gas nozzle efficiently regulates the top heater and thus provides maximum process control. Large chip removal station with high energy handpiece. Extensive assortment of economically priced nozzles, with custom sizes made to order.
Maximum precision. Maximum flexibility. Maximum user-friendliness. Description
Weller’s next-generation repair and rework station combines a completely new design with state-of-the-art split optic camera technology to provide users with absolute reliability, optimum process control and enhanced ease of use.
Advanced design for enhanced precision The WQB 4000SOPS is modularly built with a slide platform, advanced patented systems and materials of the highest quality to guarantee industrial reliability and long-lasting durability.
s Heating from above: selective and sensitive The hot gas heater with patented nozzle system, coupled with digital control elecIt is a comprehensive, system tronics for user-friendly temperature monitoring and for the removal and soldering of BGA regulation of risk theofairthermal flow rate, facilitates components, without the metered supply of heat to the damage tothe thefinely component or circuit board. components. A temperature sensor placed directly in the hot gas nozzle prevents thermal overload of the component and efficiently regulates the top heater, providing maximum process control.
Split Optics for perfectly accurate 16 Note: Some of the positioning The new SOPS (Split Optic Positioning
Material No.
Shelf Pack
T0053370699 1 WQB4000SOPS Weller’s next-generation repair and rework station combines a completely new design with state-of-the-art split optic camera technology to provide users with absolute reliability, optimum process control and enhanced ease of use. • Advanced design for enhanced precision Thewas WQB4000SOPS is modularly built with a slide platform, The system engineered to bring patented systems and materials of the highest quality to togetheradvanced a finely tuned balance of autoguarantee industrial reliability and long-lasting durability. mated technology for component pick-up • Heating from above: selective and sensitive and positioning semi-automated The hotwith gas aheater with patented nozzle system, coupled with rework cycle – opening up new possibilidigital control electronics for temperature monitoring and regulation of the air flow the finely metered supply of heat to ties and applications in rate, repairfacilitates and rework. the components. A temperature sensor placed directly in the hot gas nozzle prevents thermal overload of the component and Well considered detail, high-precision efficiently regulates the top heater, providing maximum process results and an outstanding price-perforcontrol. mance ratio promise make this new • Heating fromtobelow: rapid and homogeneous The Weller temperature-regulated two-zone infrared bottom heater system from the first choice among provides discerning users. rapid, yet precisely controlled warm-up at homogeneous substrate temperatures. • Streamlined technology The new WQB4000SOPS enables users to work with a standard PC via a USB 2.0 port. Additional appliances or interface cards are not required. Technical Data • Monitoring software: comprehensive functions Dimensions (L x W x H): The monitoring software determines temperature profiles and approx. 630 x 630 x 650 mm facilitates definition of the optimal soldering process. Dynamic dimensions: • Teach-in feature: fast, effective parameter identification Repeatable results can only be achieved by a process cycle that approx. 1030 x 630 x 650 mm considers all the parameters of the repair operation. The ‘Teach-in’ Power supply voltage: 230V, 50/60 Hz feature provides a quick and easy method of determining process Mains fuse: T10A cycle parameters and identifying critical points - without the need Power: 2300W for in-depth operator knowledge. The software includes a library of Top heater: 700W soldering profiles, i.e. general and specific parameters enabling Bottom heater: repeatable use. New profiles can be edited easily by the user and large 1600W (260 x 260) mm added to the library. • Perfect component/circuit board alignment small 400W (120 x 120) mm With the split optic camera, live images of a component and a Compressed-air supply: circuit board can be aligned independently of each other using the 400-600 kPa purified, dry compressed air x, y and theta axis fine adjustment drives. Compressed-air converter: 1. Component size & theta axis vacuum 60 kPa 2. Align y axis Temperature control: 3. Align x axis infinitely variable 50°C - 400°C 4. Component aligned! control precision ± 10°C • Removal (desoldering) of the defective component The ability to preheat the circuit board and a temperature/time Flow control: controlled process are critical for good reflow of the solder joints. infinitely variable 5-50 l/min. At the end of the reflow cycle, to avoid damage to the solder pads, Air consumption: 60-100 l/min. (4 bar) a vacuum lift automatically removes the component from the board Total weight: approx. 40kg with minimum force and exact temperature control. • Cleaning of the circuit board Residual solder should be removed from the board with a desoldering iron or desolder wick. Residual contaminants can be removed with a suitable solvent spray. • Positioning of the new component The new WQB4000SOPS station’s split optic camera placement system ensures precise positioning of a wide range of components - from BGA to fine pitch SMT. • Component soldering Reflow of the replaced component is essentially a repeat of the removal process, without the vacuum lift being initiated at the end of the profile. An extensive range of hot gas nozzles and adapters are available to cater for the many body sizes of BGA devices or QFP and PLCC packages. Optimized ease of use Heating• from below: profiling Temperature Everything about the WQB 4000SOPS rapid andAnhomogeneous eight-step temperature profile enables soldering andnew cooling that are perfectly tailored to specific has requirements. been engineered and designed for The temperature-regulated two-zone Split Optics for perfectly ease of use and superb results – from its infrared •bottom heater provides rapid,accurate positioning Thecontrolled new SOPS (SplitatOptic Positioning System) with the highadvanced, user-friendly software all the way yet precisely warm-up resolution 2 Mpix CMOS USB 2.0 camera enables accurate through to its manyItsupportive details, such homogeneous substrate temperatures. positioning of the components following desoldering. works with as the feature. a single camera and two-colour lighting forSoftStart exact positioning. Superb image quality at high dynamics and very low image noise ensure precise, ergonomic component mounting. • An ever expanding field of applications The new WQB4000SOPS is optimally equipped to take on repair and rework in mobile communications, research and general BGA. QFP work. Specifically, with PBGA, CBGS, CCGA, CSP’s, Micro BGA, QFN, PLCC, SOP and PGA components. 1. Components without direct access to the solder joint 2. Leaded components with external solder joints 3. A wide variety of special modules.
View brochure at website: www.weller.de
above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Replacement Soldering Tips
Description
Tip Size mm
Reach mm
Material No.
Shelf Pack
600°F (315°C)
700°F (371°C)
800°F (427°)
Screwdriver
1.6
15.9
PTA6
PTA7
PTA8
1
Single flat
1.6
15.9
PTAA6
PTAA7
PTAA8
1
Screwdriver
2.4
15.9
PTB7
PTB8
1
Single flat
2.4
15.9
PTBB7
PTBB8
1
Screwdriver
3.2
15.9
PTC7
PTC8
1
Single flat
3.2
15.9
PTCC7
PTCC8
1
Screwdriver
4.7
15.9
PTD7
PTD8
1
Single flat
4.7
15.9
PTDD7
Screwdriver
6.0
15.9
Conical flat
1.2
15.9
Screwdriver
0.8
15.9
Long Screwdriver
1.2
Long Screwdriver
PTC6
1
PTE8
1
PTF7
PTF8
1
PTH7
PTH8
1
25.4
PTK7
PTK8
1
2.0
25.4
PTL7
PTL8
1
Long Screwdriver
3.2
25.4
PTM7
PTM8
1
Long conical
0.8
25.4
PT07
PT08
1
Conical
0.8
15.9
PTP7
PTP8
1
Narrow Screwdriver
1.6
15.9
PTR6
PTR7
PTR8
1
Long conical
0.4
25.4
PTS6
PTS7
PTS8
1
PTH6
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 17
Weller
PT SERIES Suit WTCPS/T stations and TC series soldering pencils.
10 (Set)
Weller
th high heat demands Order number Replacement Soldering Tips T0052920299
0 (Set)
th high heat demands 0 (Set)
th0 (Set) high heat demands 10 (Set)
ET SERIES Suits EC1000/2000 WES50, WES51, WESD51 stations fitted with EC1201A, WSP50 and WSP51, PES50 & PES51 soldering pencils. Description
Tip Size mm
Reach mm
Material No.
Shelf Pack
Screwdriver Order number
1.6
15.9
ETA
1
Single flat
1.6
15.9
ETAA
1
Order number Screwdriver T0054470899
2.4
15.9
ETB
1
Single flat
2.4
15.9
ETBB
1
3.2
15.9
ETC
1
Order number T0054470499 Screwdriver
3.2
15.9
ETCC
1
4.7
15.9
ETD
1
Single flat number Order
T0054470399
Order number Screwdriver T0054470199 Single flat
4.7
15.9
ETDD
1
T0054470999 Screwdriver
0.8
15.9
ETH
1
number LongOrder Screwdriver T0054471599
1.2
25.4
ETK
1
Long Screwdriver
2.0
25.4
ETL
1
Order number Long Screwdriver T0054470599
3.2
25.4
ETM
1
Long conical
0.8
25.4
ETO
1
Order number Conical T0054471099
0.8
15.9
ETP
1
Order number Narrow Screwdriver
1.6
15.9
ETR
1
Long conical
0.4
25.4
TETS
1
Conical Order number
0.6
15.9
ETT
1
Single flat Order
0.4
17.8
ETUB
1
Order number
T0052920299 T0054471699 T0054470699
number Order number T0052920299 Mini Wave for J Leads and Gullwings
ETGW
T0054472199 Order number th high heat demands Order number Order number T0054470399 T0052920299 T0054471799 th high heat demands Order number Order number T0052920299 0 (Set) Order number T0054470899 T0054470799 Order number Order number T0054470399 Order number T0054470199 th high heat demands Order number T0054471899 Order number Order number T0052920299 Order 0 (Set) T0054470899 Order number number XT SERIES to suit WP120 Soldering Pencil T0054470499 T0054470399 T0054471299 Order number Order number Order number T0054470399 Order Description Width Thickness Material No. Shelf T0054470199 Order number number T0054470999 mm mm Pack th high heat demands Order number T0054470899 T0054471399 Order number Order number T0052920299 Order number T0054470899 Order number Order number T0054470199 XTALT0054470499 Chisel 1.6 1.0 1 T0054471599 T0054470199 Order T0054471199 Order number number Order number T0054470399 Order number T0054470199 Order T0054470999 Order number number T0054470599 T0054470299 XTMT0054470499 Chisel 3.2 1.2 1 Order T0054470299 Order number number Order number T0054470899 Order number T0054470499 Order T0054471599 Order number number T0054471099 Order number T0054470999 Order number T0054470399 XTA Chisel 1.6 0.7 1 T0054471499 Order number T0054470399 Order number T0054470199 Order number T0054470999 Order number T0054470599 Order number T0054471699 Order number number T0054471599 Order T0054471999 Order number T0054470499 XTBOrder Chisel 2.4 0.8 1 T0054470899 number T0054470499 Order number T0054471599 Order number T0054471099 BOrder number T0054470699 Order number number T0054470599 Order T0054472099 Order number T0054470199 number T0054470999 T0054470599 XTCOrder Chisel 3.2 0.8 1 Order number T0054470599 Order T0054471699 Order number number T0054472199 Order number number T0054471099 Order T0054472299 Order number T0054470499 Order number T0054471599 Order number T0054471099 T0054470699 XTD Order Chiselnumber 4.6 0.8 1 T0054470699 T0054471799 Order number number T0054471699 Order Order number T0054470999 Order number T0054470599 Order number T0054471699 Order T0054470799 XTET0054472199 Chiselnumber 5.9 1.2 1 T0054470799 Order number T0054470699 Order Order number number T0054471599 Order number T0054471099 Order number T0054470699 Order number T0054471799 T0054471899 Order number T0054472199 Order Order number number T0054470599 Order number T0054471699 Order number T0054472199 Order number 18 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. T0054470799 T0054471299 Order number
Replacement Soldering Tips
Material No.
Style
Size 1
Size 2
Reach
LT1
Round
0.25
-
12.5
LT1L
Round
0.2
-
25
Bent Round
0.2
-
25
Round
0.2
-
15
LT1SLX
Bent Round
0.4
-
20.5
LT1X
Bent Round
0.4
-
20.5
LT4AU
Single Flat
1.2
-
15
LT4X
Bent Round
1.2
0.4
16.4
LTA
Chisel
1.6
0.2
12.5
LTAS
Round
1.6
-
12.5
LTAX
Bent Chisel
1.6
0.8
13.5
LTB
Chisel
2.4
0.8
12.5
LTC
Chisel
3.2
0.8
12.5
LTCS
Round
3.2
-
12.5
LTD
Chisel
4.6
0.8
12.5
LTGW
Gull Wing
3.2
2.3
17.8
LTF
Single Flat
1.2
-
12.5
LTH
Chisel
0.8
0.4
12.5
Bent Chisel
0.8
0.2
20
Chisel
1.2
0.4
20
Knife (J-Lead)
6.2
-
20
LTL
Chisel
2.0
1.0
20
LTM
Chisel
3.2
1.2
20
LTS
Round
0.4
-
20
LT1LX LT1S
LTHX LTK LTKN
T0058744845
Short Barrel
40mm
T0058744846
Long Barrel
68mm
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 19
Weller
LT Tip Selection Chart to suit WSP80/WP80
Replacement Soldering Tips
Weller
NT Tip Selection Chart to suit WMP Pencil
Description
Width A
Thickness B
Length C
Material No.
Chisel Tip
0.8mm
0.4mm
8.4mm
NTH
Chisel Tip
1.2mm
0.4mm
8.4mm
NTK
Chisel Tip
1.6mm
0.4mm
8.4mm
NTA
Chisel Tip
1.6mm
0.4mm
9.5mm
NT6
Chisel Tip
2.4mm
0.8mm
7.4mm
NTB
Chisel Tip
3.2mm
0.8mm
7.8mm
NTC
Chisel Tip
4.0mm
0.8mm
7.8mm
NTD
Chisel Tip, Bent
0.4mm
1.6mm
8.2mm
NTAX
Round Tip, Bent
0.4mm
-
8.6mm
NT1X
0.25mm
-
7.4mm
NT1
-
8.5mm
NT1S
Soldering Tips
or micro soldering pencil WMP
Round Tip
NT-Tip
Round Tip, Small
0.25mm
Description
Width A
Thickness B
Length C
Chisel tip
0,4 mm 0,8 mm 1,2 mm 1,6 mm 1,6 mm 2,4 mm 3,2 mm 4,0 mm
0,15 mm 0,4 mm 0.4mm 0,4 mm 0,4 mm 0,4 mm 1.2mm 0,8 mm 0,8 mm 0,8 mm
14,0 mm 8,40.14mm mm 8,4 mm 9,5 mm 7,4 mm 7,8 mm 8,2 mm 8,6 mm
8.4mm NT H
NT1SC
NT K NT A NT 6 9.9mm NT B NT C NT D
NT4
3.0mm
13.4mm
NTGW
Chisel tip, bent Round tip, bent 45°
1,6 mm Ø 0,4 mm
0,4 mm
8,2 mm 8,6 mm
NT AX NT 1X
Round tip
Ø 0,25 mm
–
7,4 mm
NT 1
8,5 mm
NT 1S
Chisel Tip
Round Tip, Sloped 45°
Gull Wing
WDH 60 (Set) WDH 60 (Set) WDH 60 (Set) WDH 450°C60 (Set) 450°C very small SMD parts 450°C very small 450°C g tip RTW SMD 2 parts very small SMD parts g tip RTW 2 parts very g tipsmall RTW SMD 2 g tip RTW 2
2.0mm
Order number Order number T0051317899 RTW Tip Selection to suit WMRT thermal tweezer OrderChart number T0051317899 Round tip slim Order – number Ø 0,25 mm T0051317899 T0051317899 Cat No.
Ø 1,2 mm
–
Order number RTW1 Order number T0054465199 Order number T0054465199 Order number T0054465199 NT Measuring T0054465199 tip Order number for thermo element Order number T0054465299 Order number RTW2 T0054465299 Order number T0054465299 T0054465299 Order number Order number T0054465399 Order number T0054465399 Order number RTW3 T0054465399 T0054465399 Order number Order number T0054465499 Order number T0054465499 Order number T0054465499 RTW4 T0054465499 Order number Order number T0054465699 Order number T0054465699 Order number T0054465699 T0054465699
2,0 mm
3,0 mm
13,4 mm
Ø 0,5 mm
–
–
20
Width 1
0.4mm
Width 2
-
NT 1SC
Style
Round tip, sloped 45° Gull wing
oldering oldering 201 / 0402 oldering 201 / 0402 oldering 201 / 0402 201 / 0402
Dimensions
Type/Order No.
9,9 mm
Length OA
NT 4 NT GW
Tweezer tip
Single product code Material No.
T0054465199
NT MS
0.7mm
0.4mm
Tweezer tip
T0054465299
3mm
0.7mm
Tweezer tip
T0054465399
6mm
0.7mm
Tweezer tip
T0054465499
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Replacement Soldering Tips
Description
Tip Size mm
mm
Material No.
Shelf Pack
LHT-C Chisel Tip
3.2
1.2
T0054445599
1
LHT-D Chisel Tip
5.0
2.0
T0054445299
1
LHT-E Chisel Tip
7.0
2.0
T0054445199
1
LHT-F Chisel Tip
9.3
2.0
T0054445099
1
LHTEX Bent Chisel Tip
7.0
2.0
T0054446100
1
Tip Size mm
Material No. mm
Shelf Pack
T0054460199
1
T0054461299
1
T0054460299
1
RT SERIES to suit WMRP pencil
Description
RT1 Needle Tip
0.2
RT1C Chisel Tip
0.4
RT2 Point Tip
0.8
RT3 Chisel Tip - Straight
1.3
0.4
T0054460399
1
RT4 Chisel Tip - 1.5mm thick
1.5
0.4
T0054460499
1
RT5 Chisel Tip, bent, 30°
0.8
0.4
T0054460599
1
RT6 Round Tip, bevelled, 45°
1.2
T0054460699
1
RT7 Knife Tip, sloped, 45°
2.2
T0054460799
1
RT8 Chisel Tip
2.2
0.4
T0054460899
1
RT9 Chisel Tip
0.8
0.4
T0054460999
1
RT10GW Gull Wing
1.2
2.0
T0054461099
1
RT11 Chisel Tip
3.6
0.9
T0054461199
1
T0054461399
1
RT Measuring Tip
0.15
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 21
Weller
WSP150 SERIES
Replacement Soldering Tips
Weller
WT SERIES to suit WT-50 Thermal Tweezers
Strip Size
Tip Size mm
“x” mm
Material No.
Shelf Pack
0405-1805, SOD80, MELF
1.0
11.0
WTA-1
T0054414199
1pr
1808-1812, SOD87, SOT23, SOD89
3.0
11.0
WTA-2
T0054414699
1pr
SOT192, SO4-SO
6.0
11.0
WTA-3
T0054414799
1pr
SO14, SO16, SOJ14, SOJ16
12.5
10.0
WTA-4
T0054414399
1pr
SO20, SO20L, SOJ20
18.5
12.0
WTA-5
T0054414499
1pr
VERTICAL USE
3.0
WTA-12
T0054415399
1pr
Tip Size mm
Material No.
Shelf Pack
Taper
1.0
WPT01
1
Screwdriver
2.4
WPT02
1
Chisel
2.0
WPT03
1
Screwdriver
5.0
WPT04
1
Nozzle
1.5
WHC0150
1
Nozzle
4.7
WHC0152
1
Tip Size mm
Material No.
Shelf Pack
Tapered Needle
0.5
WPT15
1
Chisel
3.0
WPT16
1
Hot Blow
1.5
WHC54
1
Hot Blow
4.9
WHC55
1
WTA-2
WTA-3
WTA-12
WPT0 SERIES PYROPEN TIPS, Suit WSTA6 Auto Ignition Jr.
Description
WPT SERIES PYROPEN TIPS, Suit WST2 Junior
Description
22
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Replacement Soldering Tips
Description
Tip Size mm
Material No.
Shelf Pack
Conical
3mm
720101AU
1
Chisel
2mm
720102
1
Spade
4mm
720103
1
Conical
2mm
720105
1
Spade
4mm
720106
1
Pyramid
2mm
720107AU
1
Flat
3mm
720113
1
Hot Blow
4mm
720151
1
Hot Blow
6mm
720152
1
Hot Blow
10mm
720153
1
Tip Size mm
Material No.
Shelf Pack
Taper
-
WPT1
1
Chisel
2.0
WPT2
1
Spade
2.0
WPT3
1
Spade 45°
3.0
WPT4
1
-
WPT5
1
Square Taper Pyramid
0.5
WPT7
1
Spade 35°
2.0
WPT8
1
Spade 35°
3.0
WPT9
1
Offset Tapered Needle
1.0
WPT10
1
Chisel
8.0
WPT11
1
Round Head Needle
3.0
WPT12
1
Long Tapered Needle
5.0
WPT13
1
-
WPT14
1
Hot Blow
2.5 ID
WHC50
1
Hot Blow
3.3 ID
WHC51
1
Hot Blow
4.9 ID
WHC52
1
Hot Blow
7.4 ID
WHC53
1
Heat Shrink Attachment Long
WAR54
1
Heat Shrink Attachment Small
WAR55
1
WPT SERIES PYROPEN TIPS, Suits WSTA3 and WPA2
Description
Taper Needle
Threaded Tip Base
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 23
Weller
REPLACEMENT TIPS JUMBO PYROPEN WSTA5
Replacement Soldering Tips
Weller
PSI SERIES PORTASOL TIPS Suit PSI-100 Irons
Description
Tip Size mm
Material No.
Shelf Pack
Single Flat
1.0
PSI1
1
Single Flat
2.4
PSI2
1
Single Flat
3.2
PSI3
1
Single Flat
4.8
PSI4
1
Single Flat
1.0
PSI5
1
Double Flat
2.4
PSI6
1
Double Flat
3.2
PSI7
1
Double Flat
4.8
PSI8
1
Hot Blow
-
PSI9
1
Hot Knife
-
PSI10
1
Replacement Desoldering Tips DS SERIES TIPLETS Suit DS102, DS651, DS1201, DS1203A Tools and DS650 Station/DS80UNC/DSV80
Description mm
Tip Size mm
Material No.
Shelf Pack
DS103
1
mm
DS103 Collecter Tube Assy. DS110
0.63
1.52
12.7
DS110
1
DS112
0.91
1.93
12.7
DS112
1
DS113
1.16
2.48
12.7
DS113
1
DS114
1.80
3.25
12.7
DS114
1
DS116
1.14
2.48
19.05
DS116
1
DS117
0.63
2.28
19.05
DS117
1
DS117 Desoldering Tip
1.5
2.9
18
T0051355000
1
DS113 Desolder Tip Left
1.2
2.5
18
T0051351300
1
DS119
0.7
1.9
26
T0051352700
1
Metric
24
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Replacement Desoldering Tips
Description
Outside Ø
Inside Ø
Length a
Material No.
Shelf Pack
DX110 NOZZLE
1.9
0.7
23
T0051314000
1
DX111 NOZZLE
2.5
0.7
23
T0051314100
1
DX112 NOZZLE
2.3
1.0
23
T0051314200
1
DX113 NOZZLE
2.5
1.2
23
T0051314300
1
DX113HM NOZZLE with improved thermal transfer
2.5
1.2
23
T0051315000
1
DX114 NOZZLE
3.3
1.8
23
T0051314400
1
DX115 NOZZLE
1.9
0.7
27
T0051314500
1
DX116 NOZZLE
2.7
1.2
27
T0051314600
1
DX117 NOZZLE
2.9
1.5
23
T0051314700
1
DX118 NOZZLE
1.5
0.7
23
T0051314800
1
DX119 Needle tiplet with non wettable stainless steel tube for removal of solder bridges in connection with hot air pencil
1.1
0.7
31
T0051315100
1
DX120 NOZZLE without inside tube for cleaning sMD pads
2.5
1.1
22
T0051315200
1
DX Cleaning Tool (Conus insert cleaning tool)
T0058706794
1
Nozzle Set DX110-DX115
T0051379099
1
Replacement Soldering Tips CT5 SERIES Suits W60D Soldering pencil Description
Tip Size mm
Reach mm
Material No. 600°F (315°C)
Shelf Pack
700°F (371°C)
800°F (427°C)
CT5A7
CT5A8
1
CT5AA7
CT5AA8
1
CT5B8
1
Screwdriver
1.6
29.36
Spade
1.6
19.00
Screwdriver
2.4
29.36
Spade
2.4
19.00
CT5BB6
CT5BB7
Screwdriver
3.2
29.36
CT5C6
CT5C7
CT5C8
1
Spade
3.2
19.00
CT5CC6
CT5CC7
CT5CC8
1
Screwdriver
4.8
29.36
CT5D7
CT5D8
1
Spade
4.8
19.00
CT5DD7
CT5DD8
1
Screwdriver
6.35
29.36
CT5E7
1
Spade
6.35
19.00
CT5EE7
1
CT5AA6
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 25
Weller
DSX SERIES CAM LOCK TIPS
Replacement Soldering Tips
Weller
CT6 SERIES Suits W100D Soldering pencils Description
Tip Size mm
Reach mm
Material No.
Shelf Pack
600°F (315°C)
700°F (371°C)
800°F (427°C) CT6C8
3.18
37.3
CT6C6
CT6C7
Screwdriver
4.76
37.3
CT6D6
CT6D7
Screwdriver
6.35
37.3
CT6E6
CT6E7
CT6E8
1
CT6F6
CT6F7
CT6F8
1
Screwdriver
Soldering Irons and Tips
Magnastat Controlled Line Voltage Soldering Irons / Unregulated Line Voltage Irons Screwdriver 9.52 Soldering 37.3
Model W 201
Description Line voltage soldering iron 200 W, 230 V, Magnastat controlled CT2 SERIES Suits W201 Soldering Iron • complete with soldering tip CT2 F7 and safety rest Screwdriver (CT2E7, CT2E8)
Screwdriver Soldering Tips for W 201
1
T0051176799
Welding Mirror (50 x 40 x 4) teflon coated
Order No. 005 61 056 99
1
Price (€) 98,00
7.0
-
T0054240799
T0054240899
1
10.0
-
T0054241799
T0054241899
1
(CT2F6, CT2F7, CT2F8)
Order No. Screwdriver 005(CT2G8) 42 407 99 005 42 408 99
Model CT2 E7 CT2 E8
Description11.0 Chisel tip 370°C Chisel tip 425°C
005 42 417 99 005 42 418 99
CT2 F7 CT2 F8
005 42 428 99
CT2 G8
Width A 425°
Price (€) T0054242899
7,0 mm 7,0 mm
16,90 16,90
Chisel tip 370°C Chisel tip 425°C
10,0 mm 10,0 mm
16,90 16,90
Chisel tip 425°C
11,0 mm
16,90
7,0 mm 7,0 mm
16,90 16,90
S.M.T. Soldering and Desoldering Accessories
1
HOT AIR NOZZLES FOR HAP1 Hot Air Pencil
005 42 507 99 CT2 EX7 005Description 42 508 99 CT2 EX8 005 42 517 99 F04 005 42 518 99 F04
F06
005 15 124 99 005 13 824 99
Chisel tip bent 370°C Chisel tip bent 425°C
CT2 FX7 Chisel tip bent 370°C Flat Nozzle CT2 FX8 Chisel tip bent 425°C Flat Nozzle
WDC
10,0 mm 10,0 mm
Weller WDC – Dry Cleaner (see page 168) Metal wool WDC replacement (2 pieces)
10 x 1.5mm 12 x 1.5mm
16,90 16,90 19,00 4,10
Material No.
Shelf Pack
T0058727773
1
T0058727772
1
Unregulated Line Voltage Soldering Irons Robust heating elements of special steel between natural mica-leaves, embedded in cast ceramics and first-class material make the Weller SPI irons outstanding in technology and life-time. The SPI irons come with plated and oxidation prevented Weller “Longlife“ tips. Order No. 005 64 005 99
Model SPI 16
Description Line voltage soldering iron 15 W, 230 V, unregulated • complete with soldering tip 4SPI15212 and holder • Heating up time ~180 sec. • Tip temperature ~360°C
Price (€) 39,50
Soldering Tips for SPI 16 26
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Fume Extraction
Zero-Smog® System Zero-Smog® System
In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects on people and machines. It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get caught more easily and block the alveoli in the lungs.
Weller Zero-Smog Systems offer two solutions®for fume ® Weller Zero-Smog Systems extraction: offer two solutions for fume Systems offer two solutions for fume extraction: extraction:
® separate these particles ® To protect the operator it is important to use an extraction system that is able to and gases and then re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs.
Weller® Zero-Smog®
Tip Extraction Tip Extraction
Tip Extraction
Tip Extraction Weller® FE (Fume Extraction) soldering irons have a smoke tube integrated into the handle. When soldering the tube is positioned directly above the joint and collects any fumes produced. Fume extraction attachments can be retro fitted to non fume extraction Weller® soldering irons. • • • • • •
Less investment per work place Collect pollution direct at source Up to 20 collection points with one system (200 m apart) Ergonomic friendly with easy access to work place No noise Minimal air movement
For brochure and product information refer to website: www.weller.de
Volume Extraction Volume Extraction
Volume Extraction
Volume Extraction
More suitable for applications involving, for example, solder baths, hot air soldering, micro solders and gluing work. Weller® offers various mobile systems that purify the air at up to a maximum of 8 workplaces. • • • • • •
Larger areas can be covered Low maintenance Mobile Quick & easy installation Economic for 1 to 8 work places Remote control
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 27
Weller
Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to lead-free soldering would be more nature friendly. In reality leadfree soldering smoke emissions contain more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the soldering process.
Filter Technology
Weller
Filter Technology Filter Technology Weller® Zero-Smog® Systems are specifically
® ® Weller are specifically Weller®Zero-Smog Zero-Smog®Systems Systems are specifically designed for continuous operation in industrial designed for continuous operation in industrial designed for continuous operation in industrial environments. Care and attention at the design environments. Care and attention at the environments. Care and attention at the design stage plus careful component choice and a design stage plus careful component choice stage plus careful component choice and a high quality manufacturing process have given and a high quality manufacturing process ® ® ® Zero-Smog Weller Systems are specifically high quality manufacturing process have given Weller extraction systems a world wide systems a world have given Weller® extraction ® designed for continuous operation in industrial wide reputation for reliability and longevity. Weller extraction systems a world wide reputation for reliability and longevity.
Filter Technology
environments. Care and attention at the design reputation for reliability and longevity.
® ® Weller Systems have a three stage plus careful component choice and a Zero-Smog® Systems have a three Weller®Zero-Smog stage filter system ® ® for removing small high quality manufacturing process have given Zero-Smog Systems have a three Weller filter stage system for removing small particles, ® fumes and gases that are produced Weller extraction systems a world wide stage filter system for removing small inparticles, fumes and gases that are produced different working processes:
reputation for reliability and longevity. particles, fumes and gases that are produced in different working processes: in different working processes: Weller® Zero-Smog® Systems have a three particle size:system for removing small stage filter particle size: particles, fumes and gases that are produced 0,5 µm e.g. viruses in different working processes: 0,5 µm 5 µm
1. The hazardous substances are efficiently
1. The hazardous substances areefficiently 1. captured The hazardous by thesubstances nozzle andare are absorbed efficiently captured by the nozzle and captured by the nozzle and are absorbed into the filter. are absorbed into the filter. into theparticles filter. get . Bigger 2. Bigger particles get caught caughtin inthe theprepre. filter Bigger particles caughtget in the pre-in and smaller particles caught filter and smallerget particles get caught 1. The hazardous substances are efficiently filter and smaller particles getParticulate caughtAir) in the HEPA (High Efficiency Particulate in the HEPA (High Efficiency captured the Efficiency nozzle andParticulate are absorbed Air) filter.by the HEPA (High Air) filter. 3. The Wide BandGas GasFilter Filterremoves removes the filter. filter. . into The Wide Band fumes and adhesives. . particles get caught in the pre. Bigger The Wide Band Gas Filter removes fumes and adhesives.
filter particles get caught in fumesand andsmaller adhesives.
5 µm 100 µm 10 µm 100 µm
filter. End product – clean air – is re-circulated into the workplace. . The Wide Band Gas Filter removes the workplace. fumes and adhesives.
e.g. bacteria, pigments e.g. fog, hair e.g. fibres, pollen e.g. fog, hair F7
H12
H13
F5 F7 H12 H13 Filter Class: Filter Class F5, F7: Fine dust filter as per EN 779 100Class µm F5, e.g. fog, Filter F7: hair Fine dust filter as per EN 779 Filter Class F5, F7: Fine dust filter as per EN 779 Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter F5 F7 H12 H13 Filter Class:
Filter Process Filter Process
Filter Class F5, F7: Fine dust filter as per EN 779
WFE, WFE P WFE, WFE P
Filter Process .+. .+.WFE P WFE,
.+.
1. 1.
1. filter drawings not true to original filter drawings not true to original
filter drawings not true to original
28
H12 / H13 F7
filter for clean rooms 1000 – 100 for applications with high 1000 – 100 flux content
H12 / H13
filter for clean rooms 1000 – 100
90 100 80 90 70 80 medium filtration efficiency Em % 60 against particle size 0,12 µm: 70 50 60 100 40 50 90 30 40 80 20 30 70 10 20 60 10 50 Filter Class: F5 F7 40 Filter Class: F5 F7 30 20 10 Filter Class:
WFE X WFE X
WFE 0D, WFE S, 0D, WFE8S, S, WFE S, WFE S, WFE WFE ES, WFE8S, CS WFE ES, WFE CS
WFE X
WFE 0D, WFE S, 1. S, WFE 8S, WFE 1. ES, WFE CS WFE
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
Filter Process
for applications with high for applications with high flux content Recommended Application flux content for standard applications filter for clean rooms
medium filtration efficiency Em %
e.g. viruses
F5
F7 F7 Filter Class FH12 5 / H13
against size 0,12 µm:Em % mediumparticle filtration efficiency End product – clean air – is re-circulated into against particle size 0,12 µm: 100 the workplace.
e.g. viruses e.g. bacteria, pigments
Filter Class:
Recommended Application Recommended Application for standard applications for standard applications
End product – clean air – is re-circulated into the HEPA (High Efficiency Particulate Air) End product – clean air – is re-circulated into the workplace.
5 µm e.g. bacteria, pigments 10 µm size: e.g. fibres, pollen particle 10 µm e.g. fibres, pollen 0,5 µm
Filter Class FFilter 5 Class F5
. or . . or .
1. . or . . or .
. or .
. or .
F5
H12
H13
H12
H13
1. Fine dust filter F7 H12 H13 For standard applications with a small amount of flux 1. Fine dust filter ® and pollution gases with high solid content, Weller For standard applications with a small amount of flux ® offers filter classes F or F7. and pollution gases with high solid content, Weller offers filter classes F 1. Fine dust filter or F7. . Compact filter consisting with of: a small amount For standard applications 1. Fine dust filter HEPA . consisting of Compact fluxfilter and filter pollution gasesof: with high solid For standard applications with a small amount of flux Filters particles up to 0,3 μm. Weller offers HEPA (High HEPA filter content, Weller® offers filter classes F5 or F7. ® and pollution gases with high solid content, Weller Efficiency Particulate Air) filters of class H1 and H1, Filters particles up to 0,3 μm. Weller offers HEPA (High offers filter classes F or F7. medium filtration efficiency 99,5 % / 99,95 %. Efficiency Particulate Air) filters of class H1 and H1, 2. Compact filter consisting of: medium filtration efficiency 99,5 % / 99,95 %. HEPA filterfilter consisting of: . Compact Wide gas filter Filtersband particles up to 0.3 µm. Weller offers HEPA filter For cleaning harmful fumes and vapours. The Weller Wide band gas filter HEPA (High Efficiency Particulate Air) filters Filters particles up to 0,3 μm. Weller offers HEPA (High wide band gas filter consists of 0 % filtration active carbon For cleaning harmful fumes and vapours. The Weller of class H12 and H13, medium Efficiency Particulate Air) filters of class H1 and H1, and 0 % Puratex. Harmful gases with a high molewide band gas filter consists of 0 % active carbon efficiency 99.5% / 99.95%. medium filtration efficiency 99,5 % / 99,95 %. cular weight are cleaned by the active carbon. Puratex and 0 % Puratex. Harmful gases with a high moleis suitable for absorbing gases of lower molecular cular weight are cleaned by the active carbon. Puratex Wideband band gas filter Wide gas filter weight. Because of its composition, Puratex is able is suitable for absorbing gases of lower molecular For cleaning harmful fumes and vapours. For cleaning harmful fumes and vapours. The Weller to convert a large number of chemical pollutants by weight. Because of its composition, Puratex is able The Weller wide band gas filter wide band gas filter consists of 0 % consists active carbon means of molecular modification into non-polluting to convert a large number of chemical pollutants by of 50%%active carbon and 50% Puratex. and 0 Puratex. Harmful gases with a high molegases. means of molecular modification into non-polluting Harmful gases with a high molecular weight cular weight are cleaned by the active carbon. Puratex gases. are cleaned by the active carbon. Puratex is suitable for absorbing gases of lower molecular . filterfor (option) is Gas suitable absorbing gases of lower weight. Because of its composition, Puratex is able The gas filter is used for extracting adhesive fumes . Gas filterweight. (option)Because of its composition, molecular to convert a large number of chemical pollutants by and solvents. Experience has shown that filtering The gas filter is used for extracting adhesive fumes Puratex is able to convert a large number of means of molecular modification into non-polluting suspended particles is not so vital in this respect. and solvents. Experience has shown that filtering chemical pollutants by means of molecular gases. The gas filter is filled with 0 % active carbon and suspended particles is not so vital in this respect. modification into non-polluting gases. 0 % Puratex. The HEPA H12 and H13 is omitted. The gas filter is filled with 0 % active carbon and . Gas filter (option) 0 % Puratex. The HEPA H12 and H13 is omitted. 3. Gas filter (option) The gas filter is used for extracting adhesive fumes The gas filter is used for extracting adhesive and solvents. Experience has shown that filtering fumes and solvents. Experience has shown suspended particles is not so vital in this respect. that filtering suspended particles not so The gas filter is filled with 0 % active is carbon and vital this respect. The gas filter is filled with 0 % in Puratex. The HEPA H12 and H13 is omitted. 50% active carbon and 50% Puratex. The HEPA H12 and H13 is omitted.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
es the WFE a genuine Air consumption lter-lift system allows Height cartridge replaceDiameter ction) soldering irons he unit – additional Weight
30 l/min 200 mm (7.8 in) 140 mm (5.5 in) HEPA filter H13 2,7 kg / 5.9 lb and wide band gas filter
(50 % active carbon, 50 % Puratex) Fine dust filter F7 Order No. 0V
005 36 402 99
Order No. 10V
WFE
WFE P
Attributes
Solder Fume electrically Extractingdriven Unit Small, portable, fume extraction unit
05 36 402 99
WFE
Attributes
e voltage fume Up to FE soldering irons can be o run with one or two connected ering irons. The WFE P Electric vacuum pump to produce the oundproofed vacuum required vacuum uired vacuum – it does power stages for higher extraction r supply. The vacuum perfomance with FE soldering irons safe applications low sound level ings which can be sePortable unit for standESD alone switches depending ering irons connected rgy. The motor is Technical Data s a thermal over load Maximum capacity 2 FE soldering irons er lift system allows HEPA filter H13 Sound level < 45 db (A) at 1 m distance filter replacement. and 230 V / 50 Hz nected directly to unit Operating voltage wide band gas filter required. Power input 70 W
Tip Extraction
• Electric vacuum pump to produce the required vacuum • 2 power stages for higher extraction performance with 2 FE soldering irons Scope of supply • Portable unit for stand alone applications. Scope of supply includes: WFE P Fume extraction unit Compact filter • WFE P Fume extraction unit • Compact filter Consists of: HEPA filter H13, wide band gas filter Consists of: HEPA filter H13, wide band (50 % active carbon, 50 % Puratex) The smoke absorption tube is integrated into Fine dust filter F7gas filter (50% active carbon, the handle. It can be placed over the joint 50% Puratex) • Fine dust filter F7 Order No. 0V 005 36 386 99 when soldering but can be retracted when Technical Data: Order No. 10V WFE2P access to the joint is a problem and can also be Maximum capacity 2 FE soldering irons removed for cleaning. The irons are temperaSound level <45 db (A) at 1m distance Operating voltage 230V/50Hz ture controlled, ergonomic and allow precise Power input 70W handling. These electronically controlled irons Maximum vacuum 30.000 Pa Height 295mm (11.6in) Diameter 140mm (5.5in) Weight 4kg/8.8lb
FE (Fume Extraction) Soldering Irons Maximum vacuum
30.000 Pa
Height
295 mm (11.6 in)
Diameter
140 mm (5.5 in)
Weight
de band gas filter 0
atex)
005 36 386 99
WFE2P
4 kg / 8.8 lb
Fine dust pre-filter F7
Tip Extraction
Fine dust pre-filter F7 can be driven from any Weller® power unit compatible with the rating of the iron or any Weller® rework station. The range of iron power ratings and the extensive range of solder tips mean that there is an iron to suit all applications. The FE soldering irons are supplied with a burn proof hose 5 mm (0.19 in) diameter, 2,5 m (98.42 in) long.
ESD safe
Order No.
FE (Fume Extraction) Soldering Irons005 33 150 99
FE (Fume Extraction) Soldering Irons
Description FE 50 Soldering iron set 50 W / 24 V, with safety rest KH 20*. Not available in US.
Description
Material No.
Shelf Pack
® The smoke absorption tube is integrated into the handle. can be driven from any Weller The smoke absorption tube is integrated into power unit 005 32 152 99 FEplaced 50M Soldering 50 W / 24 V, Magnastat controlled with safety rest KH 20*. It can be over the iron jointset when soldering but can be the handle. It can be placed over the joint compatible with the rating of the iron or any retracted access to the joint is a problem and can Notwhen available in US. ® when soldering but can be retracted when Weller rework station. The range of iron power also be removed for cleaning. The irons are temperature controlled, ergonomic and allow precise handling. These access to the joint is a problem and can also be ratings and the extensive range of solder tips electronically controlled irons can be driven from any removed for cleaning. The irons are temperamean that there is an iron to suit all applicaWeller®FE power unit compatible the iron 005 33 151 99 75 Soldering iron set with 80 Wthe / 24rating V withofsafety rest KH 20*. tions. The FE soldering irons are supplied with a ture controlled, ergonomic and allow precise or any Weller® rework station. The range of iron power For use with LT tips. ratings and the extensive range of solder burn proof hose 5 mm (0.19 in) diameter, 2,5 m tips mean that handling. These electronically controlled irons there is an iron to suit all applications. The FE soldering (98.42 in) long. irons are supplied with a burn proof hose 5mm (0.19 in)
diameter, 2.5m (98.42 in) long.
005 26 162 99
FE Attachments
FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*.
Not available in US. FE ATTACHMENTS ESD safe A range of FE attachments are available to fit standard Weller® soldering and desoldering irons to convert fume extraction versions. The attachments Order No. them toDescription are supplied with all necessary fittings and hoses. The * Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons 005 33 150 99 FE 50 Soldering iron set 50 W /if24 V, affected. with safety performance of the retro-fitted tools not Forrest KH 20*. for use with KH 20 and KH 23 safety rests. soldering irons WP120, WP80, WSP80, WMP, Weller®Not available in US. MLR21 or soldering irons with handle diameter 10-13mm (0.39-0.51 in). Clip will be fixed with an silicone O-ring to the soldering iron. 005 32 152 99
FE 50M Soldering iron set 50 W / 24 V, Magnastat controlled with safety rest KH 20*.
Gedruckt durch: Martinu am: 4.6.2007
T0052918699 FE Attachment with in tube, WSP80,® soldering irons WP 120, WP 80, 1 A range of FE attachments are available to fit For Weller Not available US. 6.0mm for WP120, ® WP80, MLR21, MLR80, WMP standard Weller soldering and desoldering WSP 80, WMP, MLR 21 or soldering irons with irons to convert them to fume extraction handle diameter 10 –13 mm (0.39 – 0.51 in). FE Attachment with tube, 4.5mm for WP120, WMRP and versions. The attachments are supplied with all Clip will be fixed with an silicone O-ring to the WSP80, MLR21, MLR80, WMP finesafety soldering 1 005 33 151 99 FEWP80, 75 Soldering iron set 80 W / 24 for V with rest KH 20*. T0052918599 applications necessary fittings and hoses. The performance soldering iron. For use with LT tips. of the retro-fitted tools is not affected.
Order 005 26 No. 162 99 005 29 186 99
Description FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*. FE Attachment Not available in US.with tube, ø 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21, MLR 80, WMP. Note: Some of the above items may require a freight lead time. Product depictions scale. Broken shelf 5% (0.17 Surcharge. herein do notand include 005 29 185 99are notFEto Attachment withpacks tube, attract ø 4,5 amm in) forPrices WP 120, WMRP WSPGST. 80, 29
Weller
Fine dust pre-filter F7
de band gas filter atex)
The Weller® WFE P is a line voltage fume Up to FE soldering irons can be Description Material No. Shelf extraction unit designed to run with one or two connected Pack FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce the T0053624599 WFEP2 1 has an electric, long-life, soundproofed vacuum required vacuum The Weller® WFE P2 is a line voltage fume extraction unit pump to produce the required vacuum – it does power stages for higher extraction designed to run with one or two FE (Fume Extraction) soldering irons. The WFE P2 has an electric, long-life, not need a compressed air supply. The vacuum perfomance with FE soldering irons soundproofed vacuum pump to produce thePortable required unit for stand alone applications pump has two power settings which can be sevacuum - it does not need a compressed air supply. The lected by means of rocker switches depending vacuum pump has two power settings which can be on the number of FE soldering irons connected selected by means of rocker switches depending on the number of FE soldering irons connected to the unit. This to the unit. This saves energy. The motor is saves energy. The motor is maintenance-free and has a maintenance-free and has a thermal over load thermal over load to protect the unit. The filter lift system to protect the unit. The filter lift system allows allows fast and convenient main filter replacement. FE HEPA filter H13 soldering irons are connected directly to unit - additional fast and convenient main filter replacement. and leads are not required. FE soldering irons are connected directly to unit • Up to 2 FE soldering irons can be wide band gas filter – additional leads are not required. connected
converter. The contaminated air is purified by a pre-filter and main filter system. A compressed air cleaning filter removes additional odours caused by the compressed air. This highly efficient filter system makes the WFE a genuine air recovery system. The filter-lift system allows fast and convenient filter cartridge replacement. The FE (Fume Extraction) soldering irons are connected directly to the unit – additional Description leads are not required.
Weller
Weller® WFE2X
ESD safe
low sound level
Technical Data Maximum capacity
2 FE soldering irons
Sound level
< 39 db (A) at 1 m distance
Maximum vacuum
20.000 Pa
Volume Extraction Operating pressure
3,5 - 6 bar
WFE2X KIT 1 Mobile fume extraction kit Includes: Scope of supply • 2X Fume extraction unit 100-240V / 50/60Hz WFE Fume extraction unit • KIT 1 WF60 Sloped stativ extraction Compressed air cleaning filter arm for volume extraction consists of: Compact filter Funnel nozzle Consists of: HEPA filter H13, wide band gas filter Stop valve (50 % active carbon, 50 % Puratex) Bench mounting bracket Fine dust filter F7 Extraction hose
Air consumption
30 l/min
Height
200 mm (7.8 in)
Diameter
140 mm (5.5 in)
Order No. 0V
005 36 402 99
Weight
2,7 kg / 5.9 lb
Order No. 10V
WFE
converter Portable unit for stand alone applications
Material No. WFE2XKIT1AU
HEPA filter H13 and Shelf wide band gas filter Pack 1
Fine dust pre-filter F7
WFE 2ES / WFE 2CS
Fume extraction unit ® WFE2ES as Weller economical solution
WFE P Kit
Small, portable, electrically driven fume extraction unit
Attributes
Attributes ® fume extraction unit purifies air WFE2ES Mobile The Weller WFE P is a line voltage fume Economy Volume Extraction Unit up 2 toPort workplaces extraction unit designed to run with one or two • Up to Easy Maximum 2 Work Stations filter exchange •FE (Fume Extraction) soldering irons. The WFE P Brushless Fan QuickEC andExtractor simple installation 3 h (WFE CS) • Maximum Airflow 200m Optional: Speed control has an electric, long-life, soundproofed vacuum • Maximum Vacuum 1800Pa pump to produce the required vacuum – it does • F5 Pre-Filter •not need a compressed air supply. The vacuum H12 Main Filter (Activated Carbon Foam) pump has two power settings which can be se• Low Noise Level
Up to T0053650599 FE soldering irons 1can be connected Electric vacuum pump to produce the required vacuum power stages for higher extraction perfomance with FE soldering irons Portable unit for stand alone applications
lected by means of rocker switches depending
WFE2ES KIT on the number of FE soldering irons connected 1 Workstation Kit to the unit. This saves energy. The motor is • 1 x WFE2ES •maintenance-free and has a thermal over load 1 x Extraction Arm • 1 x Table Mount Kit to protect the unit. The filter lift system allows • 1 x Length Hose
Portable fume extraction kit for one work station
ESD safe
The fume extraction unit WFE 2ES is easy to install and operate. It is designed as a smaller central system and is supplied complete with Technical Data flexible hose, arm and bracket, ready for instalMaximum capacity lation at the workplace.
Sound level
Operating voltage Power input Maximum vacuum
1
HEPA filter H13 and wide band gas filter
Scope of supply 005 36 506 99 WFE 2ES Fume extraction unit Compact filter Fine dust pre-filter F5 Consists of: HEPA filter H12, active carbonate foam Scope of supply 2 FE soldering irons Fine dust pre-filter F 5 005 36 571 99 KIT 1 WF Funnel 60 for volume extraction < 45 db (A) at 1 m distance WFE P Fume extraction unit consists of: 230 V / 50 Hz 005 36 578 99 Extraction arm Compact filter 005 36 573 99 Funnel nozzle 70 W Consists of: HEPA filter H13, wide band gas filter 005 36 574 99 Stop valve 005 365 75 99 Bench mounting bracket HEPA filter H12 (50 % active carbon, 50 % Puratex) 30.000 Pa 005 36 576 99 Extraction hose
Fine dust filter F7
Diameter
140 mm (5.5 in) Order No. 0V 005 36 516 99
and active carbonate foam
Order No. 0V
005 36 386 99
Weight
Order No. 10V
Order No. 10V
WFE2P
Height
295 mm (11.6 in) 4 kg / 8.8 lb
WFE2ES KIT1
Fine dust pre-filter F7
Option: Arm with slopped nozzle
0 Technical Data Maximum capacity
2 work places
Maximum extraction rate
220 m3/h
Sound level
55 db (A) at 1 m distance
Operating voltage
230V / 50Hz (115V / 60Hz)
Power input
115 VA
Maximum vacuum
1.800 Pa
Dimensions (L x W x H)
320 x 320 x 395 mm
Weight
low sound level
fast and convenient main filter replacement. FE soldering irons are connected directly to unit ESD safe low sound level – additional leads are not required.
T0053651699
005 36 572 99 KIT 1 WF Sloped 60 for volume extraction consists of 005 36 578 99 Extraction arm 005 36 577 99 Slopped nozzle 005 36 574 99 Stop valve 005 365 75 99 Bench mounting bracket 005 36 576 99 Extraction hose
Option: WFE 2CS with speed control
12.6 x 12.6 x 15.5 in
Order No. 0V
005 36 526 99
9 kg / 19.8 lb
Order No. 10V
WFE2CS
1
30
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Exploding Drawing for WFE2P
Installation Option for a Central System with WFE P
Weller
KH E Stop + Go-support
WDD 161V WFE P
soldering iron desoldering iron
Installation Option for a Central and Stand Alone System with WFE 20D central system
stand alone system with pipe system 50 upto ca. 200 m right angle pipe 50 005 36 322 99
extraction hose 5 mm > 2,5 m bis max. 10 m 005 25 410 00
WSD 81
connecting element 40-50 005 36 415 99
WMD 3
pipe 50 005 36 323 99
double socket 50 005 36 319 99 connecting element 40-50 005 36 415 99
T-piece 50 005 36 344 99
pipe 50 005 36 323 99
connecting nipple for extraction hose 5 mm 005 36 338 99
branch 50 005 36 321 99
pipe clamps 50 005 36 329 99 connecting nipple for hose 17 005 36 358 65
end seal 50 005 36 324 99
pipe 50 005 36 323 99
end seal 50 005 36 324 99
ESD SAF E
extraction hose 40 005 36 414 00 extension hose 17 005 36 326 99 adapter 17 005 36 343 99 WFE 20D
RS 232 cable (2 m) 005 31 191 99
remote control 005 87 359 09
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 31
Accessories for Tip Suction
Weller
The following products are suitable for 50mm Diameter. When using a 75mm Diameter Hose, a tube reducer will be required. Description
Material No.
WFFMP 50 seal, locking adjustable
T0053637199
Spare Part Filters Spare filter for WFE2S: Fine dust filter F5 (10 pieces) Compact filter Consists of: HEPA filter H12, wide band gas filter (10% active carbonate foam) Spare filter for WFE2ES: Fine dust filter F5 (10 pieces) Compact filter Consists of: HEPA filter H12, wide band gas filter (10% active carbonate foam)
32
T0058735884
T0058762701
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
High Precision Tweezers Erem Tweezers Introduction The following pages show a selection of Erem high precision tweezers for the electronics industry. They are available in various shapes, finish, and materials such as: Temperature resistant to 300°C. Suffix S SA N TA None
Material Stainless Steel. Non-magnetic, anti-acid alloy. Non-magnetic nickel-silver alloy. Non-magnetic titanium. Tempered carbon steel.
Features and benefits: • Twice the heat resistance of Teflon (500°C). • The non-stick property of the Pyroplast coating results in no capillary effect on the tweezers tips while soldering. • No contamination can be caused by either a positive or negative charge. • Resistant to radiation. • Coating thickness is 40 microns.
Typical applications for Erem high precision tweezers: • Electronic assembly • Component handling • Soldering • Wire and lead cutting • Gripping • Wafer handling • Wire stripping • Biomedical
Erem
Reference Dimensions
Erem Coatings The exclusive Erem Pyroplast coating is available by special order on many models. This coating protects sensitive parts against temperature change.
Pointed Tips Straight Description
Shelf Pack
• • • • •
Precision micro tweezers Stainless Steel Serrated grips and inside serrated tips Guide pin to avoid tip overlapping 80mm, 6g
20AS
1
• • • • •
Precision tweezers Special Stainless Steel Non-magnetic Shorter tips than 3CS 110mm, 11g
3CSA
1
3CSASL
1
same as 3CSA but economy model
• • • • •
Precision tweezers Special Stainless Steel Non-magnetic Flat inside tips, very resistant 120mm, 14g
OOSA
1
• • • •
Precision tweezers Special Stainless Steel Non-magnetic 120mm, 16g
AASA
1
• • • •
Precision tweezers Non-magnetic Medium round tips for gripping tip side 2mm 120mm, 15g
2ASA
1
SSSA
1
• Precision tweezers • Special Stainless Steel • Non-magnetic • Very narrow and long handles • Low tension • 140mm, 11g
34
Material No.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Pointed Tips Straight Relieved Description
Material No.
Shelf Pack
5SA
1
• • • •
Precision tweezers, with very fine tips Special Stainless Steel Non-magnetic 115mm, 12g
• • • • • •
Precision tweezers with synthetic (PPS) tips Special Stainless Steel Non-magnetic ESD safe Heat resistant up to 250°C 120mm, 15g
258SA
1
• • • •
Precision tweezers with fine tips Curved 40° Stainless Steel 110mm, 15g
3CBS
1
• • • • •
Precision tweezers with fine tips Oblique 15° Special Stainless Steel Non-magnetic 115mm, 12g
5ASA
1
same as 5ASA but economy model
5aSASL
1
Precision tweezers with fine tips Curved Special Stainless Steel Non-magnetic, relieved 120mm, 15g
7SA
1
same as 7SA but economy model
7SASL
1
Pointed Tips Bent
Erem
• • • • •
• • • • • •
Precision tweezers bent 40° Alignment pin Serrated grips and inside serrated tips Special Stainless Steel Non-magnetic 150mm, 22g
24SA
1
• • • • •
Precision tweezers bent 50° with fibre-grip handles Reverse action Special Stainless Steel Non-magnetic 150mm, 26g
30SA
1
• • • •
Cutting tweezers Carbon steel Blade 9,5mm 115mm, 26g
15AGW
1
Cutting Tweezers
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 35
Cutters Side Cutters
Cutters
Series 600 Micro – high grade tool steel, ESD safe, resharpenable
Side- and Tip Cutters
Miniature cutters for extremely fine electronics offering improved access into confined areas.
Cutters Series 600 Micro - high grade tool steel, ESD safe, resharpenable Miniature cutters for extremely fine electronics offering improved access into confined areas. Micro Micro
Medium Medium
Maxi Maxi
Tip Cutters – tapered and relieved head Fine cutter head. One side is cut away for access even in confined areas.
b
a
Series 600 Series 2400 Series 500 New Series 2400 Series 600 Series 500 Model/Order No. Description MagicSense 622NB Side flush cut, super fine relieved head, MagicSense 9,0 cutter mm 11,0 mm 11,0 mm Width a allows very good access, 11,0 6,0 Width a b 9,0 mm mm 11,06,5 mmmm Thickness 6,0 mm mm medium hard wire 0,6 mm, Cu 0,8 mm, Thickness b 6,0 mm 6,0 mm 6,5 mm Sideand Tiphead Cutters and relieved 110 mm, 48 g
Series 800
Cutters
Cutters
Tip Cutters - tapered
Erem
Side- and Tip Cutters Fine cutter head. One side is cut away for access even in confined areas
NEW
Cutters
Side- and Tip Cutters
Description
Series 800 Price (€) 35,00 13,5 mm
13,5 mm 7,5 mm 7,5 mm Material No.
Side Cutters – oval head 676E Sidehead cutter cut, same as 622NB, The most common cutting forflush standard cutting applications. The robust cutting head allows high44,00 cutting Cutters – tapered short cuttingTip head and more robust and relieved head capability. Fine head. side is cut away for access even in confined areas. medium hard wirecutter 0,6 mm, CuOne 0,8 mm,
Shelf Pack
110 mm, –48high g Series 2400 MagicSense grade tool steel, ESD safe, resharpenable
Model/Order No. Description Price (€) Medium size. Combines robustness, view and accessibility. The series 2400 MagicSense offers optimal ergonomic 612N Side cutter semi flush cut, small head for very good access, 35,00 shape and very high hardness grade.Model/Order No. Description 776E 44,00 Side cut, cutterhard 1 medium wire 0,8 mm, hard wire 0,5 mm, Cu 1,3 mm, 776Ecutter super full flushSide super full flush cut, 622NB Side cutter flush cut, super fine relieved head, miniature side cutter, super fine relieved head, 110 mm, 48 g miniature side cutter, super fine relieved head, Medium allows very good access, Maxi allows very good access, Micro allows very medium hard wire 0,6 mm, Cu 0,8 mmgood access, medium hard wire 0,6 mm, Cu 0,8 mm, medium hard wire 0,6 mm, Cu 0,8 mm, 110mm, 48g ESD SAFE 110 mm, 48 g
Cutters Side Cutters 622N b a 632NCF
110 mm, 48 g
Side cutter flush cut, small head for very good access,
35,00
Side cutterhard superwire full flush cut, Cu 1,3 mm, 62,00 medium 0,8grade mm, Series 2400 MagicSense – high tool steel, ESD safe, resharpenable Side cutter flush cut, same asSeries 622NB,800 only for 600 soft676E materials (seeSeries page 34, Specials) New Series 2400 Series 500 110robustness, mm, 48 g tool Medium size. Combines and accessibility. Thecutting series 2400 MagicSense offers optimal ergonomic Cutters Series 2400 MagicSense - high grade steel,short ESD safe, headresharpenable and more robust 110 mm, 48 g view MagicSense shapesize. andCombines very high hardness grade. Medium robustness, view and accessibility. The series 2400 MagicSense medium hard wire 0,6 mm, Cu 0,8 mm,optimal Width a 9,0 mm 11,0 mm 11,0 mm 13,5offers mm Series 600 Micro – high grade tool steel, ESD safe, resharpenable ergonomic shape and very high hardness grade. 110 mm, 48 g Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm
NEW
Miniature cutters for extremely fine electronics offering improvedMaxi access into confined areas. Maxi 36,00 medium hard wire 0,7 mm, Cu 1,3 mm, Side Cutters – oval head Micro Max 776E Side cutter super full flush cut, Medium mm, g relieved Tip – straight, tapered and head TheCutters most common cutting110 head for 48 standard cutting applications. The robust high cutting miniature sidecutting cutter,head superallows fine relieved head, Fine cutter head allows access even in confined areas. capability. allows very good access, b a medium hard wire 0,6 mm, Cu 0,8 mm, Description Price (€) Model/Order No. Series 600 Series 2400 Series 800 New Series 600 Series 2400 Series 500 500 Series 800 110 mm, 48 gSeries b a Model/Order No. Description Price (€) MagicSense 2412E Semi flush cut, robust cutting head for general 43,00 MagicSense 670E a Tip cutter, flush cut, vertical, short11,0 head,mm 48,00 Width 9,0 mm 11,0 mm Series 2400 13,5 mm cutting applications, high cutting capability, New Series 600 super Seri Width a 9,0 hard mm 11,0 mm 11,0 mmflush cut, 13,5 Series mm 500 632NCF Side cutter full medium wire 0,5 mm, Cu 0,8 mm, medium hard wire 1,0 hard wire 0,5 mm, Cu 1,6 mm, Thickness b 6,0 mm 6,0 mm 6,5 mm MagicSense 7,5 mm Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm only for soft materials (see page 34, Specials) 110 130mm, mm 48 g 9,0 mm 11,0 mm 11,0 mm 13,5 Side Cutters - oval headSide Cutters – tapered head Width a 110 mm, 48 g Small tapered head for cutting application Thickness inb dense working 6,0areas. mm 6,0 mm 6,5 mm 7,5 m Description Material No. Shelf Side Cutters – oval head Pack 2422E Flush cut, robust head for general cutting applications, 43,00 Model/Order No. cutting Description Price (€) The most common head forcut, standard applications. The robust cutting head allows 61,00 high cutting 670EP Tip cutter, flush vertical, verywire, precise, short head, high cutting capability, for cutting soft The most common cutting head 622NA Side cutter flush cut, 35,00 Side Cutters – oval head capability. for PCBs and packages up1,6 to 0,25 for standard cutting applications. medium hardmicro wire 1,0 mm, Cu mm, mm, medium hard wire 0,7 mm, 1,0 The robust cutting head allows Thewire most cutting head for standard cutting applications. The robust cutting head allows h medium 0,4common mm, Cu Cu 0,6 mm,mm, 130 mmhard high cutting capability. 110 mm, 48 g capability. 110 mm, 48 g Model/Order No. Description Price (€) Tip Cutters – straight, tapered and relieved head 632N
2412E
24 Cutters
Semi flush cut, robust head for general Fine cutter head cutting allows access even in confined areas.
43,00
2432Efull flush cut, rasor blades Supercutting full flush cut, rasor blades cut Description No. 2432E 43,00 Super cut Model/Order 1 applications, high cutting capability, 670EPF hard wire 0,8 mm, Same as 670EP but finer version 67,50 medium Cu 1,6 mm, medium hard wire 0,8 mm, Cu 1,6 mm, 612N Sidewire cutter cut,mm, small head for very good access, medium hard wire 1,0 mm, hard 0,5semi mm,flush Cu 1,6 130mm for pitches under 0,5 mm, short head, 130micro mm hard wire 0,8 mm, hard wire 0,5 mm, Cu 1,3 mm, 130 mm Model/Order No. aftermedium Description Optional: Safety lead device 12,6048 Euro cutting. 110+ mm, g holds wire scraps ESD SAFE 110 mm, 48 g 595EW Note: For all side cutters series 500, 600 and 2400. Add “W” when ordering, e.flush g. 670E Tip cutter, cut, vertical, short head, Wire definitions see p. 22
medium hard wire 0,5 mm, Cu 0,8 mm, Flush cut, robust head for general 43,00 110cutting mm, 48applications, g Wire definitions see p. 22 Cutters 25 high cutting capability, for soft wire, 622N medium hard wire 1,0 mm, CuSide 1,6cutter mm, flush cut, small head for very good access, medium hard wire 0,8 mm, Cu 1,3 mm, 130 mm Side Cutters – tapered head 110 48flush g cut, vertical, very precise, short head, Small tapered head for cutting application 670EPin dense working areas. Tip mm, cutter, 2422E
Model/Order No. 2432E 2477E
36
Micro Medium Micro Side cutter super full flush cut,Medium small head for very good access,
for PCBs and micro packages up to 0,25 mm,
Description Super full flush cut, rasor blades cut hard wire 0,4 mm, Cu 0,6 mm,Price (€) 43,00 medium Flushmedium cut, tapered 46,00 hardhead, wire for 0,8cutting mm, Cu 110 1,6 mm, 48 g in dense working areas, 632N Side cut, small head do fornotvery good access, Note: Some of the above items may require a freight lead time.application Product are not to scale. Broken shelfcutter packs super attract afull 5% flush Surcharge. Prices herein include GST. 130depictions mm
Micro
Medium
Maxi
Side Cutters
Series 500 Medium – high grade tool steel, ESD safe, resharpenable
Series Medium – high grade tool steel, ESD safe,heads resharpenable Medium size.500 Combines robustness, view and accessibility. Big variety of cutting for precise cutting in dense a size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in dense b Medium working areas.
Cutters Series 500 Medium high grade tool steel, ESD safe, resharpenable working -areas. Series 600 Micro – high grade New Series 2400 Series 600 Series 500 Series 800
Medium size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in Miniature Micro Medium Maxi cutters for extremely fine elec MagicSense dense working areas. Micro Width a 9,0 mm 11,0 mm 11,0 mm Medium 13,5 mm Maxi Micro Medium Maxi Micro Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm
a
b
b
a
New Series 2400 Series 600 Series 500 Series 800 Series 600 New Series 2400 Series 500 800 a b Series Side Cutters – oval head MagicSense MagicSense New Series 2400 Series 600 Series 500 Series 800 The most head for standard cutting applications. The11,0 robust head allows cutting Width a 9,0 mm 11,0 mm 13,5 mm Width a common cutting 9,0 mm 11,0 mm11,0 mm mmcutting 13,5high mm MagicSense Series 600 Thickness 6,0mm mm 6,0 mm 6,0 mm 6,5 mm 6,5 mm capability.bb Thickness 6,0 7,5 mm7,5 mm
Side Cutters - oval head
The most common cutting head for standard cutting applications. The robust cutting head allows high cutting capability.
Side- and Tip Cutters Side- and Tip Cutters
Model/Order No. Description 512N
9,0 mm 6,0 mm
Cutters 11,0 mm 6,0 mm Side Cutters
11,0 mm 6,5 mm
13,5 mm Width a 7,5 mm Price (€) Thickness b Material No.35,00
cutters extremely fine ele The most common cutting head for standard cutting applications. The robust cuttingMiniature head allows highforcutting capability. Model/Order (€) capability. 512NPrice Side cutter semiNo. flush cut,Description economical line,flush cut, same as 512N 1 512E Side cutter semi 43,00 robust, applications 512N for general cuttingSide cutter semi flush cut, economical line, Micro but burnished head, Model/Order35,00 No. Description and precise working, highrobust, cutting for capability, general cutting medium hard wire 1,0 mm,applications hard wire 0,5 mm, Cu 1,6 mm, Model/Order No. Description medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, and precise working, high capability, 115 mm, 67 g 115mm, 512N67g Side cutter semi flushcutting cut, economical line,
612N ESD SAFE
medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, Tip Cutters – angled, narrow head robust, for general cutting applications
522N Side cutter flush cut, economical 115 mm,line, 67 robust, g Angled head for precision, reach operator visibility. and precise working, high cutting capability, for general cutting applications andand precise working, b a 522Ncutting capability, Side Cutters cutter flush– cut, economical line, robust, ESD safe, resharpenable 35,00 Tungsten Hard Metal high grade tool high medium hard wire 1,0 mm, hard steel, wire 0,5 mm, Cu 1,6 mm, 512Egrade Side cutter semi flush cut, same and as 512N forCugeneral cutting applications precise working, medium hard wire 1,0 mm, 1,6 mm, High tool steel, Tungsten Carbide blades, for constant load. High precision side cutter for stainless and43,00 hard 115 mm, 67 g ESD SAFE but burnished head, 115mm, 67g high cutting capability, wires like Nickel plated wire and cored-wire electrode. Piano until 60 HRc.
Cutters
Cutters
9,0 mm
Description 6,0 mm Shelf Side cutter semi flush cut, economical line, Pack robust, for general cutting applications Side Cutters – oval head and precise working, high cutting capability, Sidehigh Cutters The most common cuttingmedium head for standard cutting applications. cutting– oval head hard wire 1,0 mm, hard wire 0,5The mm,robust Cu 1,6cutting mm, head allows Series Micro – high grad capability. Side Cutters – oval The most600 common cutting head for sta 115head mm, 67 g
Erem
Cutters Cutters
Width a Thickness b
Price Side(€) cutter sem 35,00 hard medium 110 1 mm, 48 g Series 600
Model/Order No. 555E 512E
Description Price (€) 622N Side cutter flu Cutters medium hard wire 1,0 mm, hard wire 0,5 mm, 1,6 mm, Sideand Tip Cu Cutters CuSide 1,6 mm, Tip cutter flush cut 35°,flush smallcut, cutting head, 56,50 Width a 9,0 mm hard Side cutter semi same as 512N 43,00 medium 115 mm, 67 g strong version, for cutting applications in confined areas Thickness b 6,0 but burnished head, 110mm mm, 48 g Tip Cutters angled, narrow head where high cutting capacity is required, Sideand Tip -Cutters medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, 599E Cutters – oval head Side cutter flush cut, with short and robust head, 46,50 Side medium hard wire 0,6 mm, Cu 1,3 mm, Angled head for precision, reach 522N Side cutter flush economical line, robust, 35,00 115 mm, 67cut, g1,0 medium hard wire mm, Cu 1,6 mm, The most common cutting head for standard cutting applications. The robust cutting head allows high cutting Series 600 Micro high grade Tip Cutters – narrow head 120 mm, 68 g and operator visibility. Side Cutters –angled, oval – head for applications and precise working, 115general mm, 67cutting g capability. Miniature cutters for extremely fine Angled head for precision, reach and o The most common cutting head for elec sta high cutting capability, 632N 572E 50,00 Side cutter sup 572E Tip cutter flush cut 40°, relieved jaws for easier access, Tip cutter flush cut 40°, relieved jaws for easier access, 1 Tungsten Hard Metal Cutters – high grade ESD safe, resharpenable capability. medium hard wire 1,0 cut, mm, Cu 1,6tool mm, steel, 522Nhard wire cutter flush economical line, robust, 35,00 hard medium medium 0,6 mm, CuSide 1,3 hard mm, Model/Order Description (€) medium wire 0,6 mm, Cu 1,3 mm, Micro High grade tool No. steel, Tungsten Carbide blades, for constant load. High precision side cutter for stainless Price and hard 115 mm, 67 g 115mm, 68g for general cutting applications and precise working, 110 mm, 48 g 622TX Flush cut, miniature side cutter, small head, 130,00 115 and mm,cored-wire 68 g wires electrode. Piano until 60 HRc. Model/Order No. Description 532Nlike Nickel plated wire Side high cutter super full flush cut, for wire precise No. Description piano wirecutting 0,2 mm, medium hard 0,6cutting, mm, hard wire 0,4 mm, Model/Order35,00 capability, ESD SAFE 46,50 555E Tip 599E Side cutter flush cut, cut, with short and robust head, with1,2 very 612N Sidecutter cutterflush sem Cu mmsharp medium hard wire 1,0 mm, Cu 1,6 mm, medium hard wire 1,0 mm, Cu 1,6 mm, strong version 0,8 medium hard 115 mm, 67 g 115 mm, 67 g where high b a 110 mm, 48cug 582E Tip cutter -flush cut 45°, ideal fortool working steel, ESD safe, resharpenable 48,00 Cutters Tungsten Hard Metal Cutters high grade Side Cutters – oval head medium hard onhead PCBs orcutter cutting component leads, Side flush cut, with short and robust 46,50 The599E most cutting for standard cutting applications. The robust cutting headside allows highfor cutting High gradecommon tool steel, Tungsten Carbide blades, for constant load. Highhead, precision cutter stainless and Series 600 120 mm, 68 g 599T Semi flush cut, robust side cutter, 107,00 „Anti Overbite System“ avoids blades overlapping, hard wires like Nickel plated wire andhard cored-wire electrode. Piano capability. medium wire 1,0 mm, Cu 1,6 mm, until 60 HRc. Tungstenhard Carbide blades, forCu standard cutting applications, medium wire 0,6 mm, 1,3 mm, Side Cutters 35,00 – tapered head 28 Cutters 67full g flush cut, for precise cutting, Side 115 cuttermm, super Width a 9,0 mm flush Side Cutters - oval head 532N highmm, cutting 572E Tip 115 68 gcapability, piano wire 0,6 mm, 622Ntapered Sidecutter cutter flu Small head applicat Model/Order No. Description Price (€)for cutting with very sharp cut, Thickness b 6,0 mm medium hard wire 1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, medium Description Material No. medium hard hard 622TX Flush cut,hard miniature side cutter, small head, 130,00 Shelf medium wire 0,8 mm, Cu 1,6 mm, 115 mm, 67 g tapered head for access even in confined areas, Pack 582EW flush cut, small 58,00 115 piano wire 110 mm, mm, 68 48 gg 115 mm, 670,2 g mm, medium hard wire 0,6 mm, hard wire 0,4 mm, Model/Order No. Description same as 582E but wirh safety lead service, The most common cutting head Cu 1,2 mm 532N cutter super full flush 35,00 622NA Side cutter flu 599TF FlushSide cut,hard robust side for standard cutting applications. Side Cutters108,00 – oval head medium wire 0,6cutter, mm, Cu 1,3cut, mm,for precise cutting, The robust cutting head allows with very sharp cut, medium hard Tungsten Carbide blades, for standard cutting applications, 115 mm, 67 g The most common cutting head for sta high cutting capability. medium hard wire 0,8 mm, Cu 1,6 mm, 110 mm, 48 g high cutting capability, piano wire 0,6 mm, capability. 28 Cutters 582E Tip 632N Sidecutter cutterflush sup 115hard mm,wire 67 g1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, medium 599T 107,00 Semi cutter, 1 PCBs or cu 599Tflush cut, robust sideSemi flush cut, robust side cutter, on medium hard 115 mm, 67 gcutting Tungsten for cutter standard applications, 593AE Carbide blades,Tip flush cut 30°, cut easily DIL leads from the rear, 55,00 Tungsten Carbide blades, for standard cutting applications, Model/Order No. Description „Anti Overbite 110 mm, 48 g high cutting capability, piano wire 0,6 cut pins on mm, dense PCBs,piano wire 0,6 mm, high cutting capability, 612N Side cutter sem medium hard medium hard wire 1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, medium hard wire 0,4 mm, Cu 1,0 mm, ESD SAFE medium hard wire 1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, 115mm, 67g medium hard mm,Euro 68 gh Optional: Safety lead device115 + 12,60 28 Cutters 115 115 mm, mm, 68 67 gg
Side Cutters - tapered head 24 Side Cutters – tapered head 599TF Flush cut, robust side cutter, Small tapered head for cutting application in dense working areas.
Cutters 575E Tip cutter flush cut 45°, very small cutting head, Small tapered head for cutting application in denseforworking areas. Tungsten Carbide blades, standard cutting applications, for dedicate work on hybrid circuits or micro high cutting capability, piano wire 0,6 mm, modules, medium hard 0,6wire mm,0,8 mm, Cu 1,5 mm, medium hard wire wire 0,2 1,0 mm, mm, Cu hard Model/Order No. Description 110 mm, 67 gg 115 mm, 67 595Tcutter semi flush cut,Side cutter semi flush cut, Side Tungsten Carbide blades, Tungsten piano wireCarbide 0,4 mm,blades, piano wire 0,4 mm, medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm, medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm, 115mm, 67g 115 mm, 67 g Wire definitions see p. 22
Side Cutters – tapered head
Side cutter Note: Some of the above items may require 595TF a freighttapered lead time. Product depictions areflush not tocut, scale. Broken shelf packs attract a 5% Surcharge. Small head for cutting application in dense working areas.
Note: For all side cutters series 110 500, mm,600 48an g Wire definitions see p. 22
582EW
flush cut, smal same as 582E medium hard 622N Side cutter67flug 115 mm, Side Cutters – tapered head Price (€) medium hard Small tapered head for cutting applicat 595T 102,00 1 110 mm, 48 g 593AE Tip cutter flush Model/Order No. Description cut on flu de ESD SAFE 622NA Sidepins cutter medium hard medium hard 632N Side mm, cutter sup 115 110 mm, 68 48 gg 103,00 medium hard Prices herein do not include GST. 37 108,00 50,00
Pliers Pliers Pliers Pliers Description
Pliers – high grade tool steel, anti-glare finish, ESD safe - high grade tool steel, anti-glare Pliers – high grade tool steel, anti-glare finish, ESD safe Pliers – high grade tool steel, anti-glare finish, ESD safe finish, ESD safe Model/Order No. Description Model/Order No. Description 543E Round nose plier, with smooth jaws, very precise, Model/Order No. Description 543E Round nose plier, with smooth jaws, very precise, 120 mm, 67 very g with smooth jaws, very precise, 543E nose pliers, with smooth Round nose plier, Round jaws, 120 mm, 67 g precise, 120 mm, 67 g 120mm, 67g
Pliers
Material No.
Price (€) Price (€) 43,50 Price (€) 43,50 543E 43,50
Shelf Pack
1
ESD SAFE
547 Needle nose plier, with smooth rounded jaws, very precise, 547 nose plier, with smooth Needlerounded nose plier, with Needle jaws, verysmooth precise,rounded jaws, very precise, 120 mm,nose 67 gplier, with smooth rounded jaws, very precise, 547 Needle 120mm, 67g 120 mm, 67 g 120 mm, 67 g
547
45,50 45,50 45,50
1
44,00 44,00 44,00
1
Erem
ESD SAFE
Pliers EROP Cutters and Pliers
542Enose plier, with smooth Flatjaws, nose plier, with smooth jaws, Flat 542E Series 2400 MagicSense Flat nose plier, with smooth jaws, Pliers – high grade tool steel, anti-glare finish, ESD safe precise radiused edges, 542E radiused edges, Flat nose plier, with smooth jaws, precise precise radiused edges, 120mm, 67g No. 120 mm,radiused 67 g edges, precise Model/Order Description 120 mm, 67 g 120 mm, 67 pliers g 2411P Needle nose with smooth rounded jaws,
very precise, 146 mm Pliers Series 2400 MagicSense 531E Flat nose plier, Nylon inserts to prevent nicking 531E Flat nose plier, Nylon inserts to prevent nicking Pliers – high grade tool 125 nose mm, 67 g Nylon 531E Series 2400 MagicSense Flat plier, inserts to steel, preventanti-glare nicking finish, ESD safe Pliers 125 mm, 67 g - high grade tool steel, anti-glare 125 mm, 67 g finish, ESD safe Model/Order No. Description 2411PD Needle nose pliers, same as 2411P, Model/Order No. Description 2411P Needlerounded nose pliers with smooth rounded jaws, Needle nose pliers with smooth jaws, but inside serrated tips, EROP172 Round nose very precise, plier, burnished, ESD safe, very precise, 146 mm 125 mm, 63 g 146mm 146 mm 544E Chain nose plier, with smooth jaws, 544E Chain nose plier, with smooth jaws, 120 mm, 67plier, g with smooth jaws, 544E Chain nose 120 mm, 67 g 120 mm, 67 g Side Stripping – high grade tool steel, anti-glare finish, ESD safe 2442P Flat jaws, nose pliers with smooth jaws, Flat nose pliers with smooth 2411PD Needle nose pliers, same as 2411P, precise radiused edges, precise radiused EROP 174 Needle nose plier,edges, burnished, ESD safe, but inside serrated tips, Model/Order No. Description 146mm 146 mm 120 mm, 66 g 146 mm 552S Side stripping tool,with highsmooth precision, 544D Chain nose plier, jaws, 544D Chain noseAWG plier, with30smooth jaws, adjustable inside nose serrated, 544D Chain plier,42– with smooth jaws, inside serrated, 120 80 125mm, mm, 67gg inside serrated, 125 mm, 67 g EROP Pliers 2443P Round nose 125 mm, 67pliers g with smooth jaws, 2442P Flat nose pliers with smooth jaws, very precise, for bending wires,ESD safe, EROP277 Needle nose plier, burnished, Needle nose plier, burnished, ESD safe, edges, precise radiused 146 mm 140mm, 90g 140 mm, 90 g 146 mm
Fibre Optic Tools/Kits
Pre-Forming Tools
Cutting – high grade tool steel, ESD safe 2443P Round nose pliers with smooth jaws, Model/Order No. Description EROP280 Needle nose grade plier, burnished, ESDanti-glare safe, For high tool steel, finish, very –cutter for bending For Passive Passive Components Components –precise, high tool steel, finish, ESD ESD safe safe 599FO Side forgrade Kevlar silkswires, only, anti-glare 170 mm, 113 g 146 mm For Passive Components - high grade tool steel, 115 mm, 67 g anti-glare finish, ESD safe Model/Order Description Model/Order No. No. Description 554E Pre-forming 554E Pre-forming tool, tool, u-shape u-shape max. max. 65 65 mm, mm, Pre-forming tool, u-shape max. 65 mm, capacitors 0,7 mm, resistors 1/2 W, capacitors 0,7 mm, resistors 1/2 W, capacitors 0,7 mm, resistors 1/2 W, 120 120 mm, mm, 70 70 gg 120mm, 70g EROP170 Flat nose plier, burnished, ESD safe, 599TFO Side cutter semi flush cut, Tungsten Carbide blades, 120 mm, 63 g for cutting fibre optics, Kevlar and small stainless wires, 115 mm, 67 g Pre-forming tool, u-shape transverse, 554A Pre-forming 554A Pre-forming tool, tool, u-shape u-shape transverse, transverse, max. 65 mm, head width 4 mm, max. 65 mm, head width 44 mm, max. 65 mm, head width mm, 120mm, 70g 40 Pliers 40 Pliers 120 mm, 70 gg 120 mm, 70 40 Pliers EROP171 Flat nose plier, burnished, ESD safe, 120 mm, 67 g
Pre-Forming Tools
Fibre Optic Tools Holding / Gripping
Holding / Gripping 554TX Pre-forming 554TX Pre-forming tool, tool, double double u-shape u-shape simultaneously, simultaneously, max. Model/Order No. Description max. 65 65 mm, mm, head head width width 2,5 2,5 mm, mm, Precision tweezers with PPS tips, 120 70 249SA Precision tweezers 120 mm, mm,with 70 ggPPS tips, special stainless steel, non magnetic, special stainless steel, non magnetic, 130mm, 20g 120 mm, 20 g 50788 50788
38
542E
Price (€) 43,00 ESD SAFE
62,00 62,00 62,00 Price (€) 48,00 Price (€) 43,00 2411P 19,00
ESD SAFE
1
44,50 44,50 44,50
2442P 43,00
1
45,00 43,00 EROP27719,00
1
48,00 19,00 Price (€) 106,00 46,50 46,50 ESD SAFE 46,50
ESD SAFE
45,00 Price (€) 26,50 133,00
Price Price (€) (€) 55,50 55,50
554E
1
19,00 165,00 ESD SAFE
554A
50,00 50,00
1
19,00 ESD SAFE
95,00 95,00 Price (€) 249SA 22,50
1
Pre-forming 95,00 Pre-forming tool, tool, cut cut and and bent bent max. max. 65 65 mm, mm, 95,00 120 mm, 70 g 120 mm,are 70not g to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. Note: Some of the above items may require a freight lead time. Product depictions
INDEX - BY PRODUCT - ALPHA NUMERIC
Material Number
Page No.
AASA................................ CT5A7.............................. CT5A8.............................. CT5AA6............................ CT5AA7............................ CT5AA8............................ CT5B8.............................. CT5BB6............................ CT5BB7............................ CT5C6.............................. CT5C7.............................. CT5C8.............................. CT5CC6............................ CT5CC7............................ CT5CC8............................ CT5D7.............................. CT5D8.............................. CT5DD7............................ CT5DD8............................ CT5E7.............................. CT5EE7............................ CT6C6.............................. CT6C7.............................. CT6C8.............................. CT6D6.............................. CT6D7.............................. CT6E6.............................. CT6E7.............................. CT6E8.............................. CT6F6............................... CT6F7............................... CT6F8............................... DS103............................... DS110............................... DS112............................... DS113............................... DS114............................... DS116............................... EC1201AP........................ EROP277......................... ETA................................... ETAA................................. ETB................................... ETBB................................ ETC.................................. ETCC................................ ETD.................................. ETDD................................ ETGW............................... ETH.................................. ETK................................... ETL................................... ETM.................................. ETO.................................. ETP................................... ETR.................................. ETT................................... ETUB................................ LT1.................................... LT1L.................................. LT1LX............................... LT1S................................. LT1SLX............................. LT1X................................. LT4AU............................... LT4X................................. LTA.................................... LTAS................................. LTAX................................. LTB................................... LTC................................... LTCS................................. LTD................................... LTF...................................
34 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 10 38 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19
Material Number
Page No.
LTGW................................ LTH................................... LTHX................................. LTK................................... LTKN................................. LTL.................................... LTM................................... LTS................................... NT1................................... NT1S................................ NT1SC.............................. NT1X................................ NT4................................... NT6................................... NTA................................... NTAX................................ NTB.................................. NTC.................................. NTD.................................. NTGW............................... NTH.................................. NTK.................................. OOSA............................... PES50.............................. PES51.............................. PH1201............................. PH12100........................... PH1260............................. PH50................................. PSI1.................................. PSI2.................................. PSI3.................................. PSI4.................................. PSI5.................................. PSI6.................................. PSI7.................................. PSI8.................................. PSI9.................................. PSI10................................ PTA6................................. PTA7................................. PTA8................................. PTAA6............................... PTAA7............................... PTAA8............................... PTB7................................. PTB8................................. PTBB7.............................. PTBB8.............................. PTC6................................ PTC7................................ PTC8................................ PTCC7.............................. PTCC8.............................. PTD7................................ PTD8................................ PTDD7.............................. PTE8................................. PTF7................................. PTF8................................. PTH6................................ PTH7................................ PTH8................................ PTK7................................. PTK8................................. PTL7................................. PTL8................................. PTM7................................ PTM8................................ PTO7................................ PTO8................................ PTP7................................. PTP8................................. PTR6................................
19 19 19 19 19 19 19 19 20 20 20 20 20 20 20 20 20 20 20 20 20 20 34 10 10 12 12 12 12 24 24 24 24 24 24 24 24 24 24 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17
Material Number
Page No.
PTR7................................ 17 PTR8................................ 17 PTS6................................. 17 PTS7................................. 17 PTS8................................. 17 SSSA................................ 34 T0051176799................... 26 T0051314000................... 25 T0051314100................... 25 T0051314200................... 25 T0051314300................... 25 T0051314400................... 25 T0051314500................... 25 T0051314600................... 25 T0051314700................... 25 T0051314800................... 25 T0051315000................... 25 T0051315100................... 25 T0051315200................... 25 T0051317399................... 10 T0051317899................... 11 T0051318399..................... 8 T0051319099..................... 8 T0051319899......................9 T0051320199......................9 T0051320299....................10 T0051351300................... 24 T0051352700................... 24 T0051355000................... 24 T0051379099................... 25 T0051382499................... 13 T0051502699................... 13 T0051512199................... 12 T0051512599................... 13 T0051515599................... 11 T0051516199................... 12 T0051516399....................12 T0052242099....................13 T0052711799..................... 9 T0052711899..................... 8 T0052917099................... 10 T0052917199................... 10 T0052917999..................... 9 T0052918099..................... 9 T0052918199..................... 9 T0052918599................... 29 T0052918699................... 29 T0052918999................... 10 T0052919099................... 10 T0052919399..................... 9 T0052919499..................... 9 T0052920299................... 10 T0052921199....................10 T0052921599......................9 T0052921699......................9 T0052920499................... 11 T0052920699................... 11 T0052921299................... 10 T0053124699................... 13 T0053171699................... 15 T0053277599..................... 5 T0053313399..................... 8 T0053366699................... 15 T0053370699................... 16 T0053371599................... 11 T0053624599................... 29 T0053637199................... 32 T0053650599................... 30 T0053651699................... 30 T0054240799................... 26 T0054240899................... 26 T0054241799................... 26 T0054241899................... 26 T0054242899................... 26
Material Number
Page No.
T0054414199................... 22 T0054414399................... 22 T0054414499................... 22 T0054414699................... 22 T0054414799................... 22 T0054415399................... 22 T0054445099................... 21 T0054445199................... 21 T0054445299................... 21 T0054445599................... 21 T0054446100................... 21 T0054460199................... 21 T0054460299................... 21 T0054460399................... 21 T0054460499................... 21 T0054460599................... 21 T0054460699................... 21 T0054460799................... 21 T0054460899................... 21 T0054460999................... 21 T0054461099................... 21 T0054461199................... 21 T0054461299................... 21 T0054461399................... 21 T0054465199................... 20 T0054465299................... 20 T0054465399................... 20 T0054465499................... 20 T0054470199................... 18 T0054470299................... 18 T0054470399................... 18 T0054470499................... 18 T0054470599................... 18 T0054470699................... 18 T0054470799................... 18 T0056107599................... 12 T0058706794................... 25 T0058727772................... 26 T0058727773................... 26 T0058735884................... 32 T0058744845..................... 9 T0058744845................... 19 T0058744846................... 19 T0058761728..................... 9 T0058762701................... 32 TC201B............................ 12 TCP50M........................... 12 TETS................................ 18 W100D.............................. 12 W60D................................ 12 WAR54............................. 23 WAR55............................. 23 WD1000AU......................... 4 WD1000HPTAU.................. 5 WD1000MAU...................... 4 WD2000AU......................... 5 WD2000MAU.......................5 WFE2XKIT1AU................. 30 WHC0150......................... 22 WHC0152......................... 22 WHC50............................. 23 WHC51............................. 23 WHC52............................. 23 WHC53............................. 23 WHC54............................. 22 WHC55............................. 22 WMP................................... 9 WPA2................................ 13 WPBI................................ 13 WPT01.............................. 22 WPT02.............................. 22 WPT03.............................. 22 WPT04.............................. 22 WPT1................................ 23
Material Number
Page No.
WPT10.............................. 23 WPT11.............................. 23 WPT12.............................. 23 WPT13.............................. 23 WPT14.............................. 23 WPT15.............................. 22 WPT16.............................. 22 WPT2................................ 23 WPT3................................ 23 WPT4................................ 23 WPT5................................ 23 WPT7................................ 23 WPT8................................ 23 WPT9................................ 23 WR2000AAU.................... 14 WR2000DAU.................... 14 WR2002AU....................... 14 WR2AU............................. 14 WR3000MAU.................... 15 WSTA3.............................. 13 WSTA5.............................. 13 WSTA6.............................. 13 WTCPTD............................ 4 WX1010AU......................... 6 WX1011AU......................... 6 WX1012AU......................... 6 WX1AU............................... 6 WX2020AU......................... 7 WX2021AU......................... 7 WX2AU............................... 7 WXD2AU.............................7 WXD2010AU.......................7 WXD2020AU.......................7 15AGW............................. 35 2ASA................................ 34 20AS................................. 34 24SA................................. 35 2411P............................... 38 2432E............................... 36 2442P............................... 38 249SA............................... 38 258SA............................... 35 3CBS................................ 35 3CSA................................ 34 3CSASL............................ 34 30SA................................. 35 5ASA................................ 35 5ASASL............................ 35 5SA................................... 35 542E................................. 38 543E................................. 38 554E................................. 38 512N................................. 37 522N................................. 37 547................................... 38 554A................................. 38 572E................................. 37 595T................................. 37 599T................................. 37 7SA................................... 35 7SASL.............................. 35 720101AU......................... 23 720102............................. 23 720103............................. 23 720105............................. 23 720106............................. 23 720107AU......................... 23 720113............................. 23 720151............................. 23 720152............................. 23 720153............................. 23 776E................................. 36
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 39
APEX TOOL GROUP - CUSTOMER SUPPORT
HEAD OFFICE
Sales Phone: 02 6021 6666 Sales Fax: 1800 021 940 Sales E-Mail:
[email protected]
Apex Tool Group Pty Ltd 519 Nurigong Street PO Box 366 ALBURY NSW 2640 ALBURY NSW 2640 Phone: 02 6058 0300 Fax: 02 6021 7403 Email:
[email protected] Web: www.apextoolgroup.com.au
REGIONAL SALES TEAM & AGENTS NSW TONY CROSBIE Regional Sales Manager Mobile: 0457 750 475
[email protected]
PHIL CROWE Sales Supervisor Mobile: 0418 474 949 Fax: 02 4735 2296
[email protected]
GEOFF NELSON Sales Supervisor Mobile: 0418 478 086 Fax: 02 4920 8936
[email protected]
IAN BROWN Sales Supervisor Mobile: 0417 028 221 Fax: 02 9648 1990
[email protected]
WARWICK STONE Sales Supervisor Mobile: 0417 028 088 Fax: 07 3264 5258
[email protected]
MARK LINDNER Sales Supervisor Mobile: 0418 475 804
[email protected]
RAYMOND CHRISTENSEN TAMBAR PTY LTD Phone: 07 4774 5124 Fax: 07 4774 5292 Mobile: 0418 771 098
PAUL GROSS Sales Supervisor Mobile: 0408 666 478
[email protected]
QLD PETER HANNAN Regional Sales Manager Mobile: 0419 282 426 Fax: 07 3324 8847
[email protected]
[email protected]
VIC BRIAN KIDD Regional Sales Manager Mobile: 0419 289 557
[email protected]
LISA COTTON
JASON KEMP Sales Supervisor Mobile: 0418 471 297
[email protected]
MICHAEL MANNING Sales Supervisor Mobile: 0448 063 489
[email protected]
BRETT RAPONI Regional Manager Mobile: 0419 293 909 Fax: 08 9272 3903
[email protected]
GILLIAN BRAIN Sales Supervisor Mobile: 0438 681 704 Fax: 08 9272 3903
[email protected]
GRAHAM DOOLAN Sales Supervisor Mobile: 0418 476 179 Fax: 08 9272 3903
[email protected]
TAS
NT
KATINA STOTT Sales Supervisor Mobile: 0419 291 763
[email protected]
LEW PRETORIUS L & J PRETORIUS PTY LTD Phone: 03 6344 2686 Fax: 03 6344 7220 Mobile: 0438 131 669
[email protected]
TERRITORY HARDWARE AGENCIES GREG MELVILLE Phone: 0417 887 280
Sales Supervisor Sales Supervisor/ Key Accounts Mobile: 0419 293 611 Mobile: 0419 293 611
[email protected] [email protected]
WA APEX TOOL GROUP 52 Clavering Rd BAYSWATER WA 6053 Phone: 08 9370 3377 Fax: 08 9272 3903
SA CHRIS HERMAN Regional Sales Manager Mobile: 0419 295 033
[email protected]
NEW ZEALAND
FIJI
RON FRENCH TOOLWARE SALES LIMITED
ARSHAD DAUD MIDLINK MARKETING 19 Ackland Street, Vatuwaqa, SUVA, FIJI Phone: (+679) 338 6300 Fax: (+679) 338 6290 Mobile: (+679) 992 9227
3 Stonedon Drive
EAST TAMAKI, AUCKLAND, 2013 NEW ZEALAND Phone: (+649) 579 8080 Fax: (+649) 579 1166
[email protected]
NOLAN CALDWELL Phone: 0418 892 371
[email protected]
[email protected]
TONY CHIOFALO Manager, Business Development & Key Accounts Mobile: 0418 476 655
[email protected]
PATRICK McINTOSH Manager, Business Development Mobile: 0418 673 361 Fax: 02 6336 0273
[email protected]
[email protected]
ELECTRONICS
BUSINESS DEVELOPMENT
MICHAEL NAISSEN Product Engineer / Professional Tools Phone: 02 6058 0300 Fax: 02 6021 7403 michael.naissen@ apextoolgroup.com
JEFFREY BECKER Manager, Business Development & Key Accounts Mobile: 0417 520 400
[email protected]
40
[email protected]
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
