Transcript
CCIR/PAL
R eference
S pecifications 256
COLOUR
B/W
Colour Print
B&W Print 256 Gradations
A6
LAMIN
130x88
ATE LAMINATION
A6 Size Print
Lamination* Media
R
CONTROL
G
POSTCARD
STICKER
RS-232C
R.G.B.
S-VIDEO
Postcard Media
Sticker Media
RS-232C I/F
Accepts RGB
Accepts Y/C
B
Y
C
UP-2850P UP-2800P UP-2300P
4
2
2 H
4
16
2 DUPLICATE
2H DUPLICATE
4 DUPLICATE
16 DUPLICATE
RM-91& FS-20
FS-36
4 MEMORIES
RM-91 & FS-20 Usable
FS-36 Usable
4 Frame Memories
2 Duplicated 2H Duplicated Image Print Image Print
4 Duplicated 16 Duplicated Image Print Image Print
4 4 SPLIT
16 16 SPLIT
4 Split-Image 16 Split-Image Print Mode Print Mode
UP-2850P UP-2800P UP-2300P
STROBE
IPP
Strobe Capturing
Instant Pass Photo mode
MENU
Menu Operation
200
COLOR ADJUST
CAPTION
200 FEED
MEMORY
Caption Setting (48)
200 Feed Capacity
Input/Memory Color Adjustment
UP-2850P UP-2800P UP-2300P *Will soon be available
UP-2850P/2800P Front Panel
UP-2300P Front Panel
UP-2850P/2800P
UP-2300P
Printing method: Thermal head: Gradation:
Printing method: Thermal head: Gradation:
Dye transfer sublimation printing 1024 elements (12.2 dots/mm) 256 gradations for yellow, Magenta, Cyan Over 16.7 million colours per dot Printing paper size: 130 x 88mm (5 1/8 x 3 1/2 inches) Printed picture size: Max. 110 x 80mm (4 3/8 x 3 1/4 inches) (Self-laminating paper: Max. 135 x 70mm ( 5 3/8 x 2 7/8 inches)) Picture elements: 860 x 976 dots Picture memory: UP-2850P: Four frame memories UP-2800P: One frame memory Printing time: Approx. 35 seconds Inputs: Y/C separate (4-pin S terminal) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced C: 0.3Vp-p, 75Ω, unbalanced Composite video (BNC), CCIR/PAL 1.0Vp-p sync negative, 75Ω, unbalanced Analogue RGB (BNC x 4) RGB: 0.7Vp-p, 75Ω, unbalanced Sync: 0.2 to 4.0Vp-p, negative, 75Ω, unbalanced Outputs: Y/C separate (4-pin S terminal) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced C: 0.3Vp-p, 75Ω, unbalanced Composite video (BNC), CCIR/PAL 1.0Vp-p sync negative, 75Ω, unbalanced Analogue RGB (BNC x 4) RGB: 0.7Vp-p, 75Ω, unbalanced Sync: 1.0Vp-p, negative, 75Ω, unbalanced Control terminals: RS-232C (D-sub 25-pin) Remote 1 (Special mini) for optional remote control unit RM-5500 Remote 2 (Stereo mini) for optional remote control unit RM-91 or foot switch FS-20/36 Power requirements: 220 to 240V, 50/60Hz Power consumption: Max. 1.0A Dimensions: 370 (W) x 125 (H) x 417(D) mm (14 5/8 x 5 x 16 1/2 inches) Mass: 10.5kg (23 lb 2 oz) Safety regulations: EN60950, EN60601-1 (TÜV) Supplied accessories:Colour Printing Pack (for 10 prints) Paper Tray (1) Paper Cover (1) AC Power Cable Operation Manual Optional accessories: Wired/Wireless Remote Control Unit RM-5500 Remote Control Unit RM-91 Foot Switch FS-20/FS-36 Colour Printing Pack UPC-2010 (for 200 prints) Black and White Printing Pack UPC-2020* (for 200 prints) Self-laminating Colour Printing Pack UPC-2040A (for 120 prints) Colour Postcard Printing Pack UPC-2070E (for 150 prints) 16-split Self-adhesive Pre-cut Colour Printing Pack UPC-20S16 (for 200 prints) 4-split Self-adhesive Pre-cut Colour Printing Pack UPC-20S04 (for 200 prints) Paper Ejector UPA-2001 Paper Tray (for UPC-2040A and UPC-2070E) UPA-2002
UP-2850P/2800P Rear Panel
Dye transfer sublimation printing 1024 elements (12.2 dots/mm) 256 gradations for yellow, Magenta, Cyan Over 16.7 million colours per dot Printing paper size: 130 x 88mm (Self-laminating paper/Post card: 148 x 100mm) Printed picture size: Max. 110 x 80mm (4 3/8 x 3 1/4 inches) (Self-laminating paper: Max. 135 x 70mm ( 5 3/8 x 2 7/8 inches)) Picture elements: 860 x 976 dots Picture memory: One frame memory Printing time: Approx. 35 seconds Inputs: Y/C separate (4-pin S terminal) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced C: 0.3Vp-p, 75Ω, unbalanced Composite video (BNC), CCIR/PAL 1.0Vp-p sync negative, 75Ω, unbalanced Outputs: Y/C separate (4-pin S terminal) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced C: 0.3Vp-p, 75Ω, unbalanced Composite video (BNC), CCIR/PAL 1.0Vp-p sync negative, 75Ω, unbalanced Control terminals: RS-232C (D-sub 25-pin) Remote 1 (Special mini) for optional remote control unit RM-5500 Remote 2 (Stereo mini) for optional remote control unit RM-91 or foot switch FS-20/FS-36 Power requirements: 220 to 240V, 50/60Hz Power consumption: Max. 1.0A Dimensions: 370 (W) x 125 (H) x 417(D) mm (14 5/8 x 5 x 16 1/2 inches) Mass: 10kg Safety regulations: EN60950, EN60601-1 (TÜV)* Supplied accessories:Colour Printing Pack (for 10 prints) Paper Tray (1) Paper Cover (1) AC Power Cable Operation Manual Optional accessories: Wired/Wireless Remote Control Unit RM-5500 Remote Control Unit RM-91 Foot Switch FS-20/FS-36 Colour Printing Pack UPC-2010 (for 200 prints) Black and White Printing Pack UPC-2020* (for 200 prints) Self-laminating Colour Printing Pack UPC-2040A (for 120 prints) Colour Postcard Printing Pack UPC-2070E (for 150 prints) 16-split Self-adhesive Pre-cut Colour Printing Pack UPC-20S16 (for 200 prints) 4-split Self-adhesive Pre-cut Colour Printing Pack UPC-20S04(for 200 prints) Paper Ejector UPA-2001 Paper Tray (for UPC-2040A and UPC-2070E) UPA-2002 *Will soon be available. Features and specifications subjict to change without notice.
UP-2300P Rear Panel
Distributed by Printed in Japan MK4177OHB9708P1-005
©1997 Sony Corporation
Colour Video Printer
UP-2850P/2800P/2300P
Incorporating advanced Sony video printing technology, the UP-2850P, UP-2800P and UP-2300P Colour Video Printers output superb near A6 size prints with 310dpi resolution in approx. 35 seconds. Sony introduces a range of colour video printers, from its top-of-the line product, UP-2850P with four frame memories, through the UP-2800P, a high quality machine with RGB input, to the UP-2300P, a cost-effective model with the essential basic features. With high picture performance, a fast printing speed and a variety of print modes, UP-2850P, UP-2800P and UP-2300P Colour Video Printers are certainly stable performers for a wide range of medical, scientific, leisure, electronic photography and many other applications.
M ultiple Print Modes Split Memory Print (2/2H/4/16 modes)
Instant Pass Photo Mode
Two, four or sixteen different pictures can be captured in memory and printed out onto a sigle sheet.
With the optional Self-laminating Colour Printing Pack UPC-2040A, duplicate images of an Instant Pass Photo (IPP) can be Flex IPP mode menu printed for personal identification purposes. In Flex IPP mode, the size of images can be adjusted in steps of 1mm/1/8-inch. This, then, determines the number of images on a single sheet. In Fixed IPP mode, the number of images can be selected from one, four, six, nine or 16.
2 split memory print (for UP-2850P only)
H igh Quality Picture Printing at High Speed High Resolution Prints To get superb colour reproduction, the UP-2850P/2800P/2300P digitizes each R, G, B colour of the analogue video signal into 8-bit, 256-gradation data which is stored in the unit’s frame memory*. The advanced thermal head ensures 310dpi (dots per inch) high resolution and the digital process enables high quality prints with a maximum of 860 (H) x 976 (V) dots. This results in natural photo-like quality prints with over 16 million colours.
A near A6-Size Print at High Speed A near A6-size print (130 x 88mm / 5 1/8 x 3 1/2 inches) can be produced in approximately 35 seconds using the newly developed dye sublimation print media with high sensitivity. Such swift printing is ideal for image checking, filing and a myriad of other applications.
O perational Convenience
Available for the UP-2850P only. In two split mode, the whole image of two different pictures can be captured and printed on one sheet.
Multiple Video Inputs
Various settings such as caption input, print mode selection, sharpness adjustment and colour adjustment can be easily made using a function menu displayed on a connected monitor. With the UP-2850P/2800P, the menu can also be shown on the built-in LCD. In colour adjustment mode, the balance of RED, GREEN, BLUE, DARK and LIGHT can be controlled. The UP-2850P/2800P/2300P has three memories for each of the colour adjustment, allowing you to store printer condition sertings. When power is turned on, the latest settings are recalled automatically. These settings can also be accessed using the control keys on the front panel or using the optional remote control unit RM-5500.
The UP-2850P/2800P accepts analogue RGB, Y/C (S-video) and composite CCIR/PAL inputs, enabling the printer to be used with a variety of products. The UP-2300P can accept Y/C (S-video) and composite CCIR/PAL inputs.
Four or sixteen different copies can be printed out as a single sticker print.
*The UP-2850P incorporates four frame memories which enable higher quality printing in multiple image mode and other tasks while printing.
4 different sticker print
Duplicate Sticker Print (4/16 modes) Four or sixteen duplicated copies of an image can be printed out as a single sticker print.
Ribbon Status Indication
The optional wired/wireless remote control unit RM-5500 controls all printing adjustments and operations. Furthermore, the optional RM-91 Simple Remote Control Unit and FS-20/FS-36 Foot Switch are available to simplify and facilitate image capturing and printing operations.
The UP-2850P/2800P/2300P automatically counts the printing quantity and indicates on the connected monitor the remaining ink ribbon. On the UP-2850P/2800P, the indicator can also be shown on the built-in LCD.
As it is equipped with an RS-232C port, the UP-2850P/2800P/2300P can be controlled from an external computer.
Caption Setting
Duplicate Image Print (4/16 modes) Four or sixteen duplicated copies of an image can be printed out onto a sigle sheet.
Up to 48 alphanumeric characters can be printed as caption or titles beneath the image area.
Caption setting display
S uitability for Medical Applications Safety Approval 4 duplicate image print
The UP-2850P/2800P/2300P complies with the EN-60601-1 medical safety standard and is therefore suitable for professional use in medical environments. *will soon be available for the UP-2300P.
Loop-through Connection for System Power Saving
Remote Control
RS-232C Port
16 duplicate sticker print
16 split memory print
Up to 200 sheets of print paper can be set in the supplied paper tray.
The print paper and ribbon cassette can be easily loaded from the front panel, even when the unit is rack mounted.
Front Operation
Different Sticker Print (4/16 modes)
200 Sheets Paper Feed Capacity
The UP-2850P/2800P/2300P has a loop-through input facility. This allows the input source to be viewed on a connected monitor, even if the printer is not powered, reducing the total power consumption of the system. When the printer is rack-mounted, input sources can be monitored without the need for rewiring.
2H split memory print
In 2H mode, the centre image of two different pictures can be captured and printed on one sheet.
Original prints produced by UP-2800P (Actual size)
Menu Operation
