Uri8200 Chase Mounted Stainless Steel Straddle Blowout Urinal

Transcript

URI8200 Chase-Mounted Stainless Steel Blowout Urinal • Strainer-less design allows for quick and efficient evacuation of debris • Large 2" diameter welded stainless steel P-trap • Flushing rim washes all four walls • All units factory tested for proper operation Specifications Materials All cabinet materials, including interior piping are Type 304 stainless steel. The fixture is made from heavy gauge stainless steel with seamless welded surfaces. Barrier-Free (ADA) and TAS Compliant Complies with ADA and TAS guidelines for urinals when mounted with front edge of the rim no more than 17" above the finished floor (3" lower than standard rough-in dimensions). ED Construction All welded construction with welds ground smooth to eliminate all accessible seams and voids. Urinal has blowout type action. Flushing connection is 1 -1/2" NPS male and requires a minimum of 30 PSI for flushing. P-trap is stainless steel, has a 2-1/2" seal, and will pass a 1.9" ball. P-trap is welded to the urinal and has a 2" NPT connection. Urinal features a continuous flushing rim which washes all four walls. P-trap is fully enclosed and there are no accessible seams, voids, or crevices where contraband can be concealed. Back and underside of fixture have fire-resistant, sound-deadening material. Urinal assembly meets ANSI/ASME A112.19.2. Model Description TI Wall Anchoring No exposed mounting fasteners in cell area – fixture is completely secured from pipe chase side with rust-resistant mounting hardware for walls up to 12" thick. URI8200 N Finish All exposed stainless steel surfaces have a bead blast finish (optional #4 satin polished finish). U Flush Valve Flush valve is not included as standard equipment with the unit. Flush valve included when specified. Flush valve rated at 1.5 to 1.6 gallons per flush. O N  URI8200 D IS C Fixture requires wall openings and accessible chase for installation and maintenance. Some field assembly may be required. Chase-Mounted Stainless Steel Blowout Urinal Required Selections (Must select one from each category) Supply (select one):  BACK Back Supply  TOP Top Supply Finish (select one):  BB Bead Blast (Standard)  PS Wall Thickness (select one):  0-4 0-4" Wall Thickness  8-12 8-12" Wall Thickness Polished Stainless Steel  4-8 4-8" Wall Thickness Flush Valve (select one):  LCCPFV Low Consumption Chrome Plated Mechanical Flush Valve  LCMFV Low Consumption Mechanical Flush Valve  LCHFC Low Consumption Hydraulic Flush Valve  LCTTFC* Low Consumption Touchtime® Electronic Flush Valve  NFV No Flush Valve *Touchtime® requires use of transformer (24VAC) available from Bradley. (See separate Technical Info) Security Fixtures Document No. 7160 Page 1 of 2 This information is subject to change without notice. 2/21/2010 © 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY(800.272.3539) Fax: 262.253.4161 bradleycorp.com URI8200 Chase-Mounted Stainless Steel Blowout Urinal (mm) TOP VIEW SIDE VIEW 2-3/4" (70) 18" (457) Flood Rim Height 12" (305) 8" (203) 4" (102) 4" (102) 21-1/2" (546) N U ED 20" (508) *See ADA/ TAS Note O N Back Supply: – ∅ 1-1/2" (38) Mechanical Push Button – ∅ 2" (51) Hydraulic or TouchTime Push Button TI ROUGH-IN DIMENSIONS (View Is from Fixture Side) Top Supply ∅ 1-1/2" (38) Back Supply Wall Opening 8" (203) x 4" (102) IS C 4-3/4" (121) 23-1/2" (597) 10-1/2" (267) 1-1/2" (38) 10" (254) D 21-1/2" (546) 16" (406) *See ADA/TAS Note 8" (203) ∅ 7/8" (22) Mounting Holes Waste Wall Opening 4" (102) x 4" (102) Finished Floor * For ADA and TAS compliant mounting, subtract 3" from dimension shown. Security Fixtures Document No. 7160 Page 2 of 2 This information is subject to change without notice. 2/21/2010 © 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY(800.272.3539) Fax: 262.253.4161 bradleycorp.com