Preview only show first 10 pages with watermark. For full document please download

Usage Of Robot Cleaner Installation Of Robot

   EMBED

Share

Transcript

INSTALLATION OF ROBOT CLEANER ORDER 3. Turn over the clearning robot body to its normal position and press the start button ( ) twice please. 1. Preparation of the vacuum cleaning robot 물걸레 장착시에는 문턱모드 설정을 반드시 해지하여 주십시오. ※ 문턱모드를 해지하지 않고 물걸레를 장착하여 사용 시, 문턱 등에 로봇이 걸려 작동하지 않을 수 있습니다. AUTO AUTO ※ 문턱 및 카펫 모드 청소 15 30 15 30 90 P.11 참조 1. After flipping over the vacuum cleaning robot, verify the positions of the side brush. 2. Match the side brush in the same direction of the groove, and push in hard. 문턱모드 설정 15 30 90 Remote control Install the wet mop on the body Start/Stop Start/Stop button button Max ORDER ● Spot Mode Spot (Spiral) cleaning mode, it moves in spiral around within 1.5m radius. 1. Press Start/Stop button. ( ) 2. Press spot mode button. ( ) 1. Press Start/Stop button. ( ) 2. Installation of the charging station and charging Body ※ During spot mode operation, the time indicator light will blink in order Remote control ORDER ● Max mode In Max mode, robot works until the battery is exhausted. 90 1. Press Start/Stop button. ( ) 2. Press the time setting button( ) until a light on the letter Max displays( ) on the window 3. Press Start/Stop button. ( ) Max Body Remote control AUTO 15 30 90 Max Product Care & Maintenance 1.Regularly empty the dust bin and replace the antibacterial filter USAGE OF ROBOT CLEANER ORDER ● Basic cleaning 1. Press Start/Stop(or Power) button. ( (Turn on with alarm sound) ) 2. Press Start/Stop button again. ( ) (the robot is preset for 90 minutes in normal and starts work in random. ● Wet mopping 1. Turn over the robot as shown in the picture. 2. Attach mop on the mop plate after microfiber wet mop soaked in water and then wrung out. 1 2 Body Start/Stop button Start/Stop button Remote control Start/Stop button Start/Stop button 3 Install the wet mop on the body Start/Stop Start/Stop button button Max Max 2 Body 문턱모드 해지 AUTO 90 1 1 2 3 ※ set up spot mode is only possible via remote control Start/Stop button Start/Stop button 1 2 3 Start/Stop button Set Max mode via time button Start/Stop button Start/Stop button Set Max mode via time button Start/Stop button