Transcript
USB 3.0 Hub (4 Port) – Quick Start Guide KAHUB4PU30A The Kogan 4-Port USB 3.0 Hub can transform each single USB 3.0 port into 4 high-speed USB 3.0 ports. You will be able to connect up to four USB devices and transfer files at speeds of up to 500Mb/s. The hub is useful for the combined use of peripheral devices, including scanners, printers, mass-storage devices, MP3 players and high-resolution cameras. The hub is fully compatible with USB 1.0, 2.0 and 3.0 devices.
PRODUCT CHECKLIST The following items are included: • •
1x USB 3.0 Hub 1x USB 3.0 Micro B to A-Type Cable
Optional extra accessory (not included): •
1x AC adapter
GETTING STARTED 1. 2. 3. 4.
Plug one end of the provided USB cable into a free USB port of your computer. Connect the other end of the USB cable to the corresponding primary port located at the rear of the hub. (see above, labelled “Port to PC”) Your operating system will detect the hub and install the required support drivers automatically. Once installed, your USB 3.0 Hub will be ready to use with other USB devices.
Note: if you are using accessories that require USB supplied power, an AC power adapter can be plugged into the power jack labelled 'DC 5V'. WARNINGS / DISCLAIMERS - Do not expose this product to moisture or sunlight. Doing so will affect normal operation and, in some cases, endanger the user. - Do not disassemble the product. There are no user-servicable parts inside. - Any misuse of the product will void warranty. In the event of product misuse, Kogan will not be responsible for any damages caused. - If you believe the hub has malfunctioned or requires repair, please refrain from attempting to repair it yourself. Refer all servicing matters to qualified personnel, or contact the Kogan Customer Support Team.
