Transcript
USB 6-in-1 Reader/Writer Quick Installation Guide Introducing the USB 6-in-1 Reader/Writer The USB 6-in-1 Reader/Writer is designed to support USB equipped PC computers. This streamlined, portable, memory card reader/writer allows users to read and write to six memory card media.
Features and Benefits • Compliant with USB Specifications, Version 1.1 • Achieves data transfer rates up to 12 Mbs/sec • Low power consumption-powered from the system. No power adapter required! • Hot-swapping feature allows you to attach/detach USB devices without first powering your computer off • Designed for devices using CompactFlash, IBM Microdrive, Smart Media, Memory Stick, MultiMediaCard (MMC), and SecureDigital (SD) memory cards including digital cameras, MP3 players, PDA's, hand held computers and more
04-0289A
1
System Requirements • Pentium or equivalent PC computer with one available USB port • Windows 98/98SE/ME/2000/XP
Package Contents • • • •
(1) USB 6-in-1 Reader/Writer (1) USB cable (Type A to mini Type B) (1) Driver CD This quick installation guide
Layout
CF/Microdrive
Memory Stick
SD/MMC
SmartMedia
Figure 1. Reader/Writer Layout
Installation Throughout Windows installation, you may be prompted to insert Windows Installation CD. Some files on this CD are neccessary to complete driver installation. Please insert CD when prompted and follow on-screen instructions. 2
Windows 98/98SE/2000 Installation Make sure the driver is installed prior to connecting the Reader/Writer. 1. Insert the driver CD into the CD-ROM drive. 2. Click Start then Run. Type D:\Setup.exe, then click OK. (Change D: to match your CD-ROM drive) 3. Click Next, select Complete, then click Next. 4. Click Next, Next, then Finish. 5. Restart Windows to complete driver installation.
Windows ME/XP Installation The driver is built-in with Windows ME and XP. Simply connect the USB 6-in-1 Reader/Writer into an available USB port and the driver will install automatically.
Connecting the Reader/Writer 1. Connect the USB cable to an available USB port. The included USB cable has two different connectors. Only one connector fits the USB port. 2. Connect the other connector of the USB cable to the USB 6-in-1 Reader/Writer.
Inserting Memory Cards For CompactFlash, IBM MicroDrive, and Memory Stick memory cards, insert with the top label facing up. For SmartMedia, MultiMediaCard, and SecureDigital memory cards, insert with the gold pins facing up. 3
Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.
PRODUCT NAME USB 6-in-1 Reader/Writer
MODEL NUMBER US2278
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SIIG, Inc. 6078 Stewart Ave. Fremont, CA 94538-3152 USB 6-in-1 Reader/Writer is a trademark of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective companies.
October, 2002
Copyright ©2002 by SIIG, Inc.
