Preview only show first 10 pages with watermark. For full document please download

Usb Drivedock V4 User`s Manual

   EMBED

Share

Transcript

USB DriveDock™ v4 USER’S MANUAL Revised (ovember 2, 2007 7eatures ! USB2 port allows attachment to all hosts, including PCs, Macs and Linux ! (atively connects to the four most common drive types (2.5” I 3.5” SATA or PATA drives) ! Two options for power inputN Use the included AC adapter, or use a 4-wire connector from a computer’s power supply ! Power status LED verifies that unit is switched on (or off) ! Small size allows you to take it anywhere 9nstallat'on 9nstru+t'ons 6: Ced @'t< Aour U"# %r'(e%o+,: Please contact WiebeTech if any items are missing or damaged. The box should containN USB DriveDock AC adapter I power cord USB Cable SATA power/data cable Metal drive plate Hard drive screws Rubber bumpers Manual and Warranty information 1 1 1 1 1 4 6 (on CD) B: Atta+< bottom plate to Aour F:GH an 9%NQRAIA dr'(eS +onL'>ure te @'t< Ma+'ntos< Computers Compat'b'l'tA The USB DriveDock is Plug-and-Play compatible under Mac OS 9.2 and OS X. (o drivers are needed. The USB2 port is USB 1.1 compatible. Mount'n> and NTe+t'n> Volumes If the hard drive attached to the USB DriveDock is already formatted, an icon representing the drive’s volume will appear (mount) on the desktop. cou can begin using the volume right away. If the drive is unformatted, a message will appear on the desktop saying that the disk is unreadable. cou can use OS X’s Disk Utility to format the drive. Egect the volume before powering down the unit by dragging the volume’s icon to the trash bin, or by selecting the volume then pressing Command-E. Shutting down the unit without first egecting the volume can result in data loss. Usa>e @'t< J'ndo@s ]perat'n> "Astem Compat'b'l'tA The USB DriveDock v4 is Plug-and-Play compatible with Windows 2000, XP, Server 2003, and Vista. (o drivers are needed on these operating systems. The USB2 port is USB 1.1 compatible. Mount'n> and NTe+t'n> Volumes If the hard drive attached to the dock is already formatted, you can begin using the volume right away. When the dock and drive are properly connected and turned on, a window may open to allow you access to the volume. If no window appears, you can find the volume by double-clicking the ]My Computer” icon. Egect the volume before powering down or disconnecting the unit by single-clicking the green arrow icon on the task bar, then selecting ]Safely removeh.” Windows will indicate when it is safe to disconnect the dock. Shutting down the unit without first egecting the volume can result in data loss. U"# %r'(e%o+, (4 User’s Manual (Windows XP) 5F5 J'ebeIe+< KKC Ie+ Iemperature ]perat'n> Pum'd'tA Compat'b'l'tA ]perat'n> "Astem Ue`u'rements "<'pp'n> Je'>