Transcript
USB Flash Disk USB 2.0
User Manual
Revision 1.0
LEGEND USB Flash Disk USB 2.0
1
Features & Specifications ¾ Smart and secure removable data storage for business and personal use ¾ Full Compliance with the Universal Serial Bus Specification v1.1 and v2.0 ¾ Offers 128MB, 256MB capacities ¾ High performance, Interface burst transfer rate 480Mbit/sec (Max.) ¾ Hi-Speed USB Flash Disk Utility Program allows user to configure their password, and partition sizes. ¾ Support USB Bus Power. ¾ State-of-the-art NAND Flash Memories ¾ Shock resistant, noise-free and longer data retention ¾ ECC Engine The hardware ECC engine provides robust capability of error detection and data correction, and it operates on-the-fly without extra firmware effort. ¾ Support Windows 98SE, Windows ME, Windows 2000, Windows XP, and MAC OS 9 or Higher.
LEGEND USB Flash Disk USB 2.0
2
System Requirement ¾ PC: IBM PC/AT Compatible , iMAC ¾ OS: Windows 98SE,Windows ME, Windows 2000,Windows XP,MAC OS 9.0 or Higher ¾ Interface: USB 2.0 or USB 1.1 ¾ HDD Free Space: 1MB
Note: ¾ Windows 98 SE does not support default Mass Storage Driver. You have to install the driver bundled with the product. ¾ The application software (GFormat) only can run with Microsoft Windows OS.
LEGEND USB Flash Disk USB 2.0
3
GFormat Application Program User Manual Files Introduction ¾
Boot (Folder): Make bootable disk must files in this folder
¾
BMPLib.dll: This Library of GFormat.exe
¾
FlashKey.exe: Enable Security
¾
FmtUsblib.dll: This Library of GFormat.exe
¾
GFormat.exe: GFormat Application program
Note: You need copy the “GFormat Folder” to Hard Disk form your USB Flash Disk before run the “GFormat.exe” application program , and you must erase “GFormat folder” on your USB Flash Disk.
LEGEND USB Flash Disk USB 2.0
4
Change Partition Size Function 1. Execute GFormat.exe
LEGEND USB Flash Disk USB 2.0
5
2. Change Partition Size Setting. Change partition size for your like partition 1 size and partition 2 size. 3. Press “Format” Button 4. Press “Yes(Y)” Button
Note: Change Partition Size, all data on the device will be erasing.
LEGEND USB Flash Disk USB 2.0
6
5. Format Complete, Please replug in your Device.
Enable Security Function 1. Execute GFormat.exe
2. Select “Enable Security” function
LEGEND USB Flash Disk USB 2.0
7
Input your password and confirm your password
Press “OK” button 3. Press “Format” button
LEGEND USB Flash Disk USB 2.0
8
4. Press “Yes(Y)” button
5. Please replug in your device, Enable Security is success.
LEGEND USB Flash Disk USB 2.0
9
Make Bootable Disk Function 1. Execute GFormat.exe
2. Select USB-ZIP or USB-HDD Bootable Disk function
LEGEND USB Flash Disk USB 2.0
10
3. Press “Format” button
4. Press “Yes(Y)” button
5. Format Complete , Make Bootable Disk success.
LEGEND USB Flash Disk USB 2.0
11
