Preview only show first 10 pages with watermark. For full document please download

Usb Lipo Charger Mr010-001.1 Name: Code:

   EMBED

Share

Transcript

Name: USB Lipo Charger Code: MR010-001.1 This small circuit can recharge in an extremely simple way Li-Po and Li-Ion cells. Using a jumper with two positions you can select two possible values for the charging current, 100mA and 500mA; the correct value should be chosen in consultation with the characteristics of the battery. The board includes the charging circuit, the JST connector for the battery, and a LED that indicates the in progress charging status. If the JST connector is not suitable, you can take the voltage for the battery even from a 2-pin strip connector that eventually can be connected to a cable adapter for your battery. The power is taken from the mini-USB connector that can be connected to any PC or mobile phone chargers. CHARACTERISTICS Parameter Value Charge corrent 100mA / 500mA Dimensions 1.15” x 0.5”(29.2 x 12.7 mm) Weight 0.1 oz (2.6g) Tab.2 – Characteristics 1 MICROBOT di Prosseda Mirko – Strada Chiesuola 117, 04010 Borgo Carso (LT), Italy web: http://www.microbot.it email: [email protected] tel: +39-347-2159275