Transcript
USB SlimHub 4000P Quick Installation Guide Introducing the USB SlimHub 4000P The USB SlimHub 4000P is designed to support USB equipped PC and Mac computers. This streamlined, mini-size 4-port USB 1.1 hub expands USB connectivity to your computer. One switching power adapter is included.
Features and Benefits • Compliant with USB Specifications, Revision 1.1 • Provides four more USB 1.1 ports for multiple device connection • Supports both full-speed (12Mbps) and low-speed (1.5Mbps) data transfer modes • Per port over-current detection and protection • Supports simultaneous operation of multiple USB devices • Hot-swapping feature allows you to attach/detach USB devices without first powering your computer off • Works with various types of USB devices including digital cameras, printers, scanners, removable drives, PC video cameras, different types of flash memory card readers and more...
System Requirements • PC or Mac computer with one available USB port • PC: Windows 98/98 SE/ME/2000/XP • Mac: Mac OS 8.6 or later
Package Contents • • • •
One USB SlimHub 4000P One switching power adapter This quick installation guide One 5-year warranty card
04-0236B
1
Safety Precautions • Do not open the case of the hub, or the warranty will be voided. • Use the power adapter that comes with the hub only. • Disconnect the power adapter if the hub will not be in use for a long period of time. • Do not expose the hub to high humidity, high temperature, direct sunlight, excessive dust/moisture, or strong magnetic field. • Do not touch the hub or cable with wet hands to prevent any electric shock. Should the hub becomes wet, unplug it from it's power source before handling. • Any modifications done to the hub by unauthorized personnel will result in voiding the warranty. • Any damage, electric shock, fire or loss of function resulting from any unauthorized modifications done to the hub will not be the responsibility of the manufacturer. • Always back up data periodically. Any error or loss of data will not be the responsibility of the manufacturer.
Power Mode Setting The USB SlimHub 4000P supports both self-powered and buspowered modes. If you're not sure which mode to use, choose selfpowered mode. • Self-powered mode (recommended mode) receives power from the power adapter and provides each downstream port with DC +5V, 500mA (max) power supply. • Bus-powered mode receives power from the USB bus and provides all four ports with DC +5V, 500mA (max) power supply in total. Note: In the configuration of cascading several USB hubs, all hubs must use self-powered mode. Only the lowest chained hub, to which only USB devices are connected, can use the buspowered mode.
2
Installation For self-powered mode (recommended): insert the power adapter into the power jack in the back of the hub. For bus-powered mode: do not use the power adapter. Note: Throughout Windows driver installation, you may be prompted to insert Windows Installation CD. Some files on this CD are neccessary to complete driver installation. Please insert CD when prompted and follow on-screen instructions.
Windows 98 Installation 1. Boot up to Windows 98 and connect the hub's USB cable to an available USB port in your system. 2. At the Add New Hardware Wizard, click Next. 3. Choose Search for the best driver... and click Next. 4. Unckeck all check boxes, click Next, Next, then Finish. 5. The USB hub is now ready for device connection. Please refer to your device's manual for installation procedure.
Windows 98 SE/ME/2000/XP Installation 1. Boot up to Windows and connect the hub's USB cable to an available USB port in your system. 2. Windows 98 SE/ME/2000/XP automatically detects and installs the correct driver for this hub. 3. The USB hub is now ready for device connection. Please refer to your device's manual for installation procedure.
Mac OS 8.6 or later Installation 1. Boot up to Mac OS and connect the hub's USB cable to an available USB port in your system. 2. Mac OS automatically detects and installs the correct driver for this hub. 3. The USB hub is now ready for device connection. Please refer to your device's manual for installation procedure.
3
Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on Support/Drivers. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.
Return Merchandise Authorization (RMA) SIIG warrants to the original buyer of the product that the hardware is free of defects in materials and workmanship for a period of one, two or five years from the date of purchase. If your product fails to be in good working order during the warranty period, you may return it to SIIG for repair or replacement at SIIG's option. To return the product, you need to follow these steps:
Step 1: Contact SIIG's RMA Department To obtain an RMA number, SIIG's RMA Department can be reached by phone at (510)413-5333 or fax at (510)657-5962 or email at
[email protected]. In order to issue an RMA number, the product serial number is required. This number can be found on the side of the box and on the back of the product.
Step 2: Complete the RMA form • Fill out your Return Merchandise Authorization (RMA) form, and include it in the package with the product. • Properly pack the product for shipping. All software, cable(s) and other accessories that came with the original package must be included. • Clearly write your RMA number on the top of the returned package and on the accompanying RMA form. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.
Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc. RMA#_______________ 6078 Stewart Ave. Fremont, CA 94538 SIIG will ship the repaired or replaced product via UPS Ground or US Mail at no cost to you. 4
PRODUCT NAME USB SlimHub 4000P
MODEL NUMBER US2247
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio or TV technician for help Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SIIG, Inc. 6078 Stewart Ave. Fremont, CA 94538-3152
USB SlimHub 4000P is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Inc. All other names used in this publication are for identification only and may be trademarks of their respective companies.
November, 2001
Copyright ©2001 by SIIG, Inc. All rights reserved.
CE Declaration of Conformity Manufacturer's Name
SIIG, Inc.
Manufacturer's Address
6078 Stewart Avenue Fremont, CA 94538 USA
Declares, that the product Product Names:
USB SlimHub 4000P
Model Number(s):
US2247
Product Options:
N/A
Conforms to the following Product Specifications: EMC
EN55022/CISPR22
Class B
EN50082-1:1992
IEC 801-2:1991 IEC 801-3:1984 IEC 801-4:1988
2kV CD, 8kV AD 27-500MHz, 3V/M 0.5kV Signal Lines, 1kV Power Lines
Application of Council Directive(s): The product herewith complies with the requirements of the EMC Directive 89/336/EEC
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE: Ivell Trading Ltd. Ivell House Commerce Way Colchester, Essex CO2 8HL Telephone: 01206 799520
